Conference Agenda

An overview of smart workplace solutions and potential improvement areas

Karolin Kelpman, Kristo Karjust, Jüri Majak

Tallinn University of Technology, Estonia

Advancing management innovation to support Industry 5.0: The case of lean in universities

Kadri Kristjuhan-Ling, Kashif Mahmood

Tallinn University of Technology, Estonia

Overview of the Development of Cybersecurity in Data Transmission Protocols Used in Industry

Sergei Ponomar, Martinš Sarkans

Tallinn University of Technology, Estonia

An International Hands-on IoT Education Platform Towards Industry 5.0

Raivo Sell¹, Piotr Czekalski², Krzysztof Tokarz², Godlove Suila Kuaban², Agris Nikitenko³, Karlis Berkolds³, Lukasz Lipka⁴

1: Tallinn University of Technology; 2: Silesian University of Technology; 3: Riga Technical University; 4: itSilesia

Sustainability Index Development for Industrial Fashion SME’s

Rūta Banelienė, Rolandas Strazdas, Jūratė Černevičiūtė

Vilnius Gediminas Technical University, Lithuania

Development of PDMS/ZnO/Gr Piezoelectric Tactile Sensor and Its Exploration of Intelligent Applications

Qinhua Hu¹, Tingxuan Chen¹, Liang Shen¹, Wenhui Lu¹, Wei Tao², Lijuan Zhang¹, Ling Yin¹, David BASSIR^2,3

1: DGUT-CNAM Institute, Dongguan University of Technology, China; 2: Smart Structural Health Monitoring and Control Lab, Sino-French Institute, Dongguan University of Technology, China; 3: IRAMAT UMR-CNRS 7065, UTBM, Rue de Leupe, CEDEX, 90010 Belfort, France

Ritz Formulation for the Wave Propagation Analysis of Axially Functionally Graded Carbon Nanotubes

Mustafa Arda, Tamer Tosun

Trakya University, Turkiye

Impact of Ship Bulbous Bow-Inspired Geometries on Draught Force in Soil Ripper Tools

Egidijus Katinas¹, Regita Bendikienė¹, Vytenis Jankauskas², Antanas Čiuplys¹

1: Kaunas University of Technology, Lithuania; 2: Vytautas Magnus University, Lithuania

From scrap to product: the effect of recycled tungsten carbide and alumina content on mechanical properties of oxide-carbide duplex ceramic composite

Arash Kariminejad¹, Piotr Klimczyk², Maksim Antonov¹, Irina Hussainova¹

1: Department of Mechanical and Industrial Engineering, Tallinn University of Technology (TalTech), Ehitajate tee 5, 19086, Tallinn, Estonia.; 2: Łukasiewicz Research Network – Krakow Institute of Technology, Zakopianska 73, 30-418, Krakow, Poland.

Effect of silica precursor on the synthesis of Zn2SiO4 based material

Jallouli Necib, Irina Hussainova, Rocío E. Rojas-Hernandez

Tallinn University of Technology, Estonia

Effect of Reinforcement Ratio of Contact Angle in Hydrophobic/Superhydrophobic AA5754/SiCp Composite Materials

Tunahan Pamukcu, Nılhan Urkmez Taskın

Trakya University, Turkiye

Laser surface texturing: eco-friendly modifications to improve wear, corrosion and biocompatibility

Laura Cepauskaite, Regita Bendikiene

Kaunas University of Technology, Lithuania

Ultra-high temperature ceramics for hypersonic applications. Heating rate effect on the synthesis mechanism

Marieta Zakaryan, Khachik Nazaretyan

A.B. Nalbandyan Institute of Chemical Physics NAS RA

Analysis of Hardness Variation under Thermal and Straining Effects of 5754 Aluminum Welded by AC and DC Current Flow

Antanas Ciuplys, Regita Bendikiene, Audrius Jutas

Kaunas University of Technology, Lithuania

The influence of boron on the mechanical properties and abrasive wear resistance of quenched low-alloy steel

Martyna Zemlik, Beata Białobrzeska

Department of Vehicle Engineering, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wroclaw, Poland

Smart Monitoring of the Expansion State of Boiler Water Walls in Coal-Fired Power Plants Using a Digital Twin Model

Lijia Luo¹, Zhenheng Lei¹, Shiyi baoa¹, David BASSIR^2,3, GongFa Chen²

1: College of Mechanical Engineering, Zhejiang University of Technology, China; 2: Smart Structural Health Monitoring and Control Laboratory, Sino-French Institute, Dongguan University of Technology, China; 3: IRAMAT UMR-CNRS 7065, UTBM, Rue de Leupe, CEDEX, 90010 Belfort, France

Vibration control of a rotating exponentially axially functionally graded flexible beam

FEZA ERALP AYDOGDU¹, BAHAR UYMAZ²

1: TEKIRDAG NAMIK KEMAL UNIVERSITY, Turkiye; 2: TEKIRDAG NAMIK KEMAL UNIVERSITY, Turkiye

Addressing Security Issues in Industry 4.0 with Quantum Key Distribution

Fabio Auriemma^1,2, Mikkel Ejrnaes²

1: Tallinn University of Technology, Estonia;; 2: CNR - Institute for SuPerconductors, INnovative materials, and devices (SPIN), Italy

Risk assessment of machinery supported by the Bayesian approach

Alina Sivitski, Priit Põdra

Alina Sivitski, Priit Põdra, Estonia, TalTech

Numerical Modeling of Fragment Flight Dynamics

Lenart Kivistik¹, Marmar Mehrparvar¹, Martin Eerme¹, Veiko Dieves², Jüri Majak¹

1: Tallinn University of Technology, Estonia; 2: Estonian Military Academy, Riia 12, 51010 Tartu, Estonia

Human-Robot Interaction: A Conceptual Framework for Safety/Risk Analysis

Johannes Matsulevitš¹, Jüri Majak¹, Martin Eerme¹, Martinš Sarkans¹, Olga Dunajeva², Kadri Kristjuhan-Ling¹, Tõnis Raamets¹, Vjatšeslav Kekšin¹

1: Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn, Estonia; 2: Virumaa College, Tallinn University of Technology, Järveküla tee 75 30322 Kohtla-Järve, Estonia

Application issues of Additive Manufacturing in Plaster Mould Casting of metals

Meelis Pohlak, Fjodor Sergejev, Toivo Tähemaa, Mart Saarna, Mart Viljus, Aigar Hermaste

Tallinn University of Technology, Estonia

Combustion synthesis of silicon carbide by magnesio-carbothermic reduction of amorphous and crystalline silica

Hasmik Kirakosyan¹, Khachik Nazaretyan¹, Hayk Beglaryan², Roman Ivanov³, Irina Hussainova³, Sofiya Aydinyan^1,3

1: Laboratory of Macrokinetics of Solid State Reactions, A.B. Nalbandyan Institute of Chemical Physics NAS RA, P. Sevak 5/2 Yerevan, 0014, Armenia; 2: Laboratory of the Synthesis of Materials Having Practical Importance from Ultrabasic Rocks and Their Investigation, M.G. Manvelyan Institute of General and Inorganic Chemistry NAS RA, H.Arghutyan 10, Yerevan, 0051, Armenia; 3: Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, Tallinn, 19086, Estonia

Effect of carbon content on the microstructure and phases of (TiVNbCrMo)C5 high entropy carbide

Furqan Anwar¹, Marek Tarraste¹, Lutz-Michael Berger², Johannes Pötschke²

1: Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate Tee 5, Tallinn, 19086, Estonia; 2: Fraunhofer IKTS, Winterbergstr. 28, D-01277 Dresden, Germany

Synthesis of novel high entropy MAX (M= Ti, Cr, Mn, Co, Ni) phase via combustion mode

Alina Zurnachyan¹, Abraham Ginosyan², Irina Hussainova³, Suren Kharatyan¹, Sofiya Aydinyan^1,3

1: A.B. Nalbandyan Institute of Chemical Physics, NAS RA, Armenia; 2: Yerevan State University, 1 Alek Manukyan St, 0025, Yerevan, Armenia; 3: Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn, Estonia

Impact of High Chromium Content Additions on the Microstructure and Mechanical Properties of Iron-Bonded Ti(C,N) Cermets

Tabeen Halawat Pampori, Märt Kolnes, Kristjan Juhani, Marek Tarraste, Jakob Kubarsepp

Tallinn University of Technology (TalTech), Estonia

Exploring Self-Propagating High-Temperature Synthesis for the Fabrication of MAX Phases

Syuzanna Melkonyan^1,2, Marieta Zakaryan¹, Yeva Grigoryan¹, Suren Kharatyan¹, Irina Hussainova³, Sofiya Aydinyan^1,3

1: Laboratory of Macrokinetics of Solid State Reactions, Institute of Chemical Physics NAS of Armenia, Yerevan 0014, Armenia; 2: Faculty of Chemistry, Yerevan State University, 1 Alex Manoogian, 0025, Yerevan, Armenia; 3: Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19086 Tallinn, Estonia

Assessing the Longevity of Agricultural Knife Coulters and Reinforced Plough Points: A Field and Simulation Approach

Justas Listauskas¹, Vytenis Jankauskas¹, Audrius Žunda¹, Egidijus Katinas²

1: Vytautas Magnus University, Lithuania; 2: Czech University of Life Sciences Prague

Non-destructive testing complemented by numerical method using Matlab for analysing surface and internal defects

Tomas Kačinskas, Saulius Baskutis

Kaunas University of Technology, Lithuania

Pedestrian and cyclist traffic measurement and estimation methodology for level crossings

Tanel Jairus¹, Stanislav Metlitski², Mihkel Kask¹, Kati Kõrbe Kaare¹

1: Tallinn University of Technology, Estonia; 2: Teede Tehnokeskus AS, Estonia

A workflow for Extended Reality based Learning in Engineering Education

Simone Luca Pizzagalli, Kashif Mahmood, Rostyslav Boychuk, Tauno Otto, Vladimir Kuts

Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Estonia

Situational Awareness in Autonomous Shuttle Buses

Krister Kalda¹, Kari M. Koskinen², Lill Sarv¹, Raivo Sell¹

1: Tallinn University of Technology, Estonia; 2: Aalto University, Finland

Understanding twin transition dynamics in the Estonian manufacturing industry

Anar Abilakimova, Merja Bauters

Tallinn University, Estonia

Virtual Factory Model for AI-Driven Optimization of OEE in Wood Manufacturing

Tõnis Raamets, Kristo Karjust, Aigar Hermaste, Karolin Kelpman

Taltech, Estonia

Investigation of Static Behavior of Functionally Graded Porous Sandwich Beams with Tpms Core

Caner Solar, Pınar Aydan Demirhan, Vedat Taşkın

Trakya University, Turkiye

Comparative Experimental Analysis of Wear Behavior of CuCrZr and CuZn39Pb3 Alloys Using Pin-on-Disc Test from Room Temperature to High Temperatures

Isik Cetintav¹, Mehmet Ceviz²

1: Department of Mechanical Engineering, Faculty of Engineering, Trakya University, Edirne, TURKEY; 2: Kesan Vocational School, Department of Electric and Energy, Trakya University, Edirne, TURKEY

Mechanical Analysis and Failure Behavior of Multi-Surface TPMS Lattices for Bone Tissue Engineering Applications

Mansoureh Rezapourian, Irina Hussainova

Mechanical and industrial engineering department, University of Technology, Tallinn, Estonia, Estonia

Effect of Heat Treatment and Cold Plastic Deformation on Secondary Hardening and Performance of X160CrMoV12 Cold Work Tool Steel

Regita Bendikiene, Lina Kavaliauskiene

Kaunas University of Technology, Lithuania

Assessment of the properties and structure of porous titanium samples via magnetic pressing

Ervins Blumbergs^1,2, Viktors Mironovs¹, Jekaterina Nikitina¹, Michail Maiorov², Vjaceslavs Zemcenkovs¹

1: Riga Technical University, Faculty of Civil and Mechanical Engineering; 2: Institute of Physics, University of Latvia

Plasma-transferred arc welded composite hardfacings with ZrB2 and TiC reinforcements

Liudmyla Melakh¹, Andrei Surzhenkov¹, Kristjan Juhani¹, Mart Viljus¹, Rainer Traksma¹, Dmytro Vedel²

1: Tallinn University of Technology, Estonia; 2: Frantsevich Institute for Problem of Materials Science, Ukraine

The effects of additives on the microstructure and properties of Hardox 450 steel welded joints

Lina Kavaliauskiene¹, Saulius Baskutis¹, Jolanta Baskutiene¹, Egidijus Dragasius¹, Neringa Kersiene¹, Yaroslav Kusyi², Vadym Stupnytskyy²

1: Kaunas University of Technology, Lithuania; 2: Lviv Polytechnic National University, Ukraine