Conference Agenda

Development of PDMS/ZnO/Gr Piezoelectric Tactile Sensor and Its Exploration of Intelligent Applications

Qinhua Hu¹, Tingxuan Chen¹, Liang Shen¹, Wenhui Lu¹, Wei Tao², Lijuan Zhang¹, Ling Yin¹, David BASSIR^2,3

1: DGUT-CNAM Institute, Dongguan University of Technology, China; 2: Smart Structural Health Monitoring and Control Lab, Sino-French Institute, Dongguan University of Technology, China; 3: IRAMAT UMR-CNRS 7065, UTBM, Rue de Leupe, CEDEX, 90010 Belfort, France

Ritz Formulation for the Wave Propagation Analysis of Axially Functionally Graded Carbon Nanotubes

Mustafa Arda, Tamer Tosun

Trakya University, Turkiye

Impact of Ship Bulbous Bow-Inspired Geometries on Draught Force in Soil Ripper Tools

Egidijus Katinas¹, Regita Bendikienė¹, Vytenis Jankauskas², Antanas Čiuplys¹

1: Kaunas University of Technology, Lithuania; 2: Vytautas Magnus University, Lithuania

From scrap to product: the effect of recycled tungsten carbide and alumina content on mechanical properties of oxide-carbide duplex ceramic composite

Arash Kariminejad¹, Piotr Klimczyk², Maksim Antonov¹, Irina Hussainova¹

1: Department of Mechanical and Industrial Engineering, Tallinn University of Technology (TalTech), Ehitajate tee 5, 19086, Tallinn, Estonia.; 2: Łukasiewicz Research Network – Krakow Institute of Technology, Zakopianska 73, 30-418, Krakow, Poland.

Effect of silica precursor on the synthesis of Zn2SiO4 based material

Jallouli Necib, Irina Hussainova, Rocío E. Rojas-Hernandez

Tallinn University of Technology, Estonia

Combustion synthesis of silicon carbide by magnesio-carbothermic reduction of amorphous and crystalline silica

Hasmik Kirakosyan¹, Khachik Nazaretyan¹, Hayk Beglaryan², Roman Ivanov³, Irina Hussainova³, Sofiya Aydinyan^1,3

1: Laboratory of Macrokinetics of Solid State Reactions, A.B. Nalbandyan Institute of Chemical Physics NAS RA, P. Sevak 5/2 Yerevan, 0014, Armenia; 2: Laboratory of the Synthesis of Materials Having Practical Importance from Ultrabasic Rocks and Their Investigation, M.G. Manvelyan Institute of General and Inorganic Chemistry NAS RA, H.Arghutyan 10, Yerevan, 0051, Armenia; 3: Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, Tallinn, 19086, Estonia

Effect of carbon content on the microstructure and phases of (TiVNbCrMo)C5 high entropy carbide

Furqan Anwar¹, Marek Tarraste¹, Lutz-Michael Berger², Johannes Pötschke²

1: Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate Tee 5, Tallinn, 19086, Estonia; 2: Fraunhofer IKTS, Winterbergstr. 28, D-01277 Dresden, Germany

Synthesis of novel high entropy MAX (M= Ti, Cr, Mn, Co, Ni) phase via combustion mode

Alina Zurnachyan¹, Abraham Ginosyan², Irina Hussainova³, Suren Kharatyan¹, Sofiya Aydinyan^1,3

1: A.B. Nalbandyan Institute of Chemical Physics, NAS RA, Armenia; 2: Yerevan State University, 1 Alek Manukyan St, 0025, Yerevan, Armenia; 3: Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn, Estonia

Impact of High Chromium Content Additions on the Microstructure and Mechanical Properties of Iron-Bonded Ti(C,N) Cermets

Tabeen Halawat Pampori, Märt Kolnes, Kristjan Juhani, Marek Tarraste, Jakob Kubarsepp

Tallinn University of Technology (TalTech), Estonia

Exploring Self-Propagating High-Temperature Synthesis for the Fabrication of MAX Phases

Syuzanna Melkonyan^1,2, Marieta Zakaryan¹, Yeva Grigoryan¹, Suren Kharatyan¹, Irina Hussainova³, Sofiya Aydinyan^1,3

1: Laboratory of Macrokinetics of Solid State Reactions, Institute of Chemical Physics NAS of Armenia, Yerevan 0014, Armenia; 2: Faculty of Chemistry, Yerevan State University, 1 Alex Manoogian, 0025, Yerevan, Armenia; 3: Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19086 Tallinn, Estonia

Assessing the Longevity of Agricultural Knife Coulters and Reinforced Plough Points: A Field and Simulation Approach

Justas Listauskas¹, Vytenis Jankauskas¹, Audrius Žunda¹, Egidijus Katinas²

1: Vytautas Magnus University, Lithuania; 2: Czech University of Life Sciences Prague

Non-destructive testing complemented by numerical method using Matlab for analysing surface and internal defects

Tomas Kačinskas, Saulius Baskutis

Kaunas University of Technology, Lithuania