2:00pm
-
3:40pm |
Materials Engineering
Location: Room Capella
Chair: Prof. Irina Hussainova
2:00pm - 2:20pm
Investigation of Static Behavior of Functionally Graded Porous Sandwich Beams with Tpms Core
Caner Solar, Pınar Aydan Demirhan, Vedat Taşkın
Trakya University, Turkiye
2:20pm - 2:40pm
Comparative Experimental Analysis of Wear Behavior of CuCrZr and CuZn39Pb3 Alloys Using Pin-on-Disc Test from Room Temperature to High Temperatures
Isik Cetintav1, Mehmet Ceviz2
1: Department of Mechanical Engineering, Faculty of Engineering, Trakya University, Edirne, TURKEY;
2: Kesan Vocational School, Department of Electric and Energy, Trakya University, Edirne, TURKEY
2:40pm - 3:00pm
Mechanical Analysis and Failure Behavior of Multi-Surface TPMS Lattices for Bone Tissue Engineering Applications
Mansoureh Rezapourian, Irina Hussainova
Mechanical and industrial engineering department, University of Technology, Tallinn, Estonia, Estonia
3:00pm - 3:20pm
Effect of Heat Treatment and Cold Plastic Deformation on Secondary Hardening and Performance of X160CrMoV12 Cold Work Tool Steel
Regita Bendikiene, Lina Kavaliauskiene
Kaunas University of Technology, Lithuania
3:20pm - 3:40pm
Assessment of the properties and structure of porous titanium samples via magnetic pressing
Ervins Blumbergs1,2, Viktors Mironovs1, Jekaterina Nikitina1, Michail Maiorov2, Vjaceslavs Zemcenkovs1
1: Riga Technical University, Faculty of Civil and Mechanical Engineering;
2: Institute of Physics, University of Latvia
3:40pm - 4:00pm
Plasma-transferred arc welded composite hardfacings with ZrB2 and TiC reinforcements
Liudmyla Melakh1, Andrei Surzhenkov1, Kristjan Juhani1, Mart Viljus1, Rainer Traksma1, Dmytro Vedel2
1: Tallinn University of Technology, Estonia;
2: Frantsevich Institute for Problem of Materials Science, Ukraine
4:00pm - 4:20pm
The effects of additives on the microstructure and properties of Hardox 450 steel welded joints
Lina Kavaliauskiene1, Saulius Baskutis1, Jolanta Baskutiene1, Egidijus Dragasius1, Neringa Kersiene1, Yaroslav Kusyi2, Vadym Stupnytskyy2
1: Kaunas University of Technology, Lithuania;
2: Lviv Polytechnic National University, Ukraine
|
Baltic Mechatronics Symposium
Location: Room Sirius
Chair: Prof. Anton Rassõlkin
Chair: Panu Kiviluoma
2:00pm - 2:15pm
Development of a modular automotive Drive by Wire kit
Arttu Heikkinen, Hannes Mönkkönen, Aleksi Heino, Eero Moisio
2:15pm - 2:30pm
Smart Bicycle Lock
Eike Buss, Martine Evensen, Laël Bitaud-Canoen, Václav Šácha
2:30pm - 2:45pm
Authenticating gate for safe robot entry into restricted access areas
Juhana Kulju, Edward Bagge, Saad Rana, Leo Isännäinen, Samuli Ahola
2:45pm - 3:00pm
Development of a modular educational low-level architecture for an electric vehicle
Rain Parve, Oliver Pool, Denis Rõžov, Fred Virve, Olga Kupina, Markus Puudersell
3:00pm - 3:15pm
Laser output power optimization in laser-induced breakdown spectroscopy for mineral identification
Casper Suominen, Petteri Haverinen, Arun Jaiswal, Niklas Sterpi
3:15pm - 3:30pm
Custom control solution development for electric car powertrain and EV-ECU
Edgar Eglis, Konstantin Kolodi, Erik Trofimov
3:30pm - 3:45pm
Efficiency Comparison of Small-Scale Wave Energy Converters
Oliver Häggman, Antti Lindman, Aadesh Chaudhari, Dima Al-Nasser, Lauri Viljavuori
3:45pm - 4:00pm
Project ZERO
Liis Rossner, Raiko Malsroos, Dan Robert Ets
4:00pm - 4:15pm
3D LiDAR based human detection for digital safety zone
André Monteiro Cocco, Veeti Karhu, Leo-Pauli Moisio, Jere Paalanen
4:15pm - 4:30pm
Washing Robot for RoRo/RoPax vessel vehicle decks
Henri Rautomäki, Ali Mert Bayazit, Nikita Budovey |
MERIThON Tallinn
Location: Room Vega
Chair: Prof. Simona Ramanauskaitė
2:00pm - 3:00pm
Student panel discussions in international interdisciplinary groups towards the generation of new research project ideas, towards a higher impact on society and industry
3:00pm - 3:40pm
Group idea presentation and closing of the MERIThON
|
