Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

Please note that all times are shown in the time zone of the conference. The current conference time is: 1st June 2025, 08:28:24am CEST

Show Presentations List View Authors Table with Max 4 Columns More... Page View for Export View to Embed Page in iFrame Print View Save Page to Disk Table with Max 2 Columns Table with Max 3 Columns Table with Max 4 Columns Table with Max 5 Columns Table with Max 6 Columns Table with Max 7 Columns Table with Max 8 Columns Table with Max 12 Columns Table with No Column Limit

Program for LiM 2025

Date: Monday, 23/June/2025
8:30am - 10:00am	Macro: Cutting 1 Location: ICM Ground Floor Room 2	Micro: Multiphoton processes Location: ICM Ground Floor Room 3 Chair: Franziska Chalupa-Gantner, TU Wien, Austria	Micro: Fundamentals: optics, phonics, and simulation Location: ICM Ground Floor Room B0 - Hall B0 Chair: Maximilian Spellauge, Munich University of Applied Sciences, Germany
10:30am - 12:30pm	WLT Award Ceremony & LiM Plenary Location: ICM 1st Floor Room 13b Chair: Prof. Jean Pierre Bergmann, Technische Universität Ilmenau, Germany
2:00pm - 3:30pm	Macro: Cutting 2 Location: ICM Ground Floor Room 2 Chair: Prof. Barbara Previtali, Politecnico di Milano, Italy	Micro: Ablation, drilling, micro-cutting and micro-joining 1 Location: ICM Ground Floor Room 3 Chair: Prof. Inka Manek-Hönninger, Univeristy of Bordeaux, France	Micro: Surface patterning, thin film processing and functionalization 1 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Germany
4:00pm - 5:30pm	Macro: Cutting 3 Location: ICM Ground Floor Room 2 Chair: Dr. Madlen Borkmann, Fraunhofer Institute for Material and Beam Technology IWS, Germany	Micro: Ablation, drilling, micro-cutting and micro-joining 2 Location: ICM Ground Floor Room 3 Chair: Emrah Uluz, Fraunhofer-Institut for Laser Technology, Germany	Micro: Surface patterning, thin film processing and functionalization 2 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Volkher Onuseit, Wissenschaftliche Gesellschaft Lasertechnik e.V., Germany
5:30pm - 7:00pm	Happy Hour + Mentoring Event Location: Meeting zone within the Networking + Catering area

Date: Tuesday, 24/June/2025
6:00am - 7:30am	Keep Lasers Running Location: TBA
8:30am - 10:00am	WoPC Plenary Location: ICM Ground Floor / 1st Floor Room 1
10:30am - 12:00pm	Macro: Joining (welding and brazing) 1 Location: ICM Ground Floor Room 2 Chair: Prof. Jean Pierre Bergmann, Technische Universität Ilmenau, Germany	Micro: Ablation, drilling, micro-cutting and micro-joining 3 Location: ICM Ground Floor Room 3 Chair: Dr. Gediminas Račiukaitis, FTMC - Center for Physical Sciences and Technology, Lithuania	AM: Laser metal deposition 1 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Annika Bohlen, BIAS - Bremer Institut für angewandte Strahltechnik GmbH, Germany
2:00pm - 3:30pm	Macro: Joining (welding and brazing) 2 Location: ICM Ground Floor Room 2 Chair: Ronald David Pordzik, Bremer Institut für angewandte Strahltechnik GmbH, Germany	Micro: Ablation, drilling, micro-cutting and micro-joining 4 Location: ICM Ground Floor Room 3 Chair: Prof. Luis A Angurel, University of Zaragoza, Spain	AM: Laser metal deposition 2 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Dr. Mohamad Bayat, Technical University of Denmark - DTU, Denmark	Advanced Laser Processing: Fundamentals and Applications (LiM-CLEO joint session) Location: Room A12 - Hall A1 Chair: Dr. Marwan Abdou Ahmed, Institut für Strahlwerkzeuge (IFSW), Germany
4:00pm - 5:30pm	Macro: Joining (welding and brazing) 3 Location: ICM Ground Floor Room 2 Chair: Michael Sawannia, University of Stuttgart, Germany	Micro: Ablation, drilling, micro-cutting and micro-joining 5 Location: ICM Ground Floor Room 3 Chair: Dr. Tobias Menold, Institut für Strahlwerkzeuge (IFSW), Germany	AM: Laser powder bed fusion of metals, polymers and glass 1 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Dr. Maria Farsari, FORTH, Greece

Date: Wednesday, 25/June/2025
6:00am - 7:30am	Keep Lasers Running Location: TBA
8:30am - 10:00am	Macro: Joining (welding and brazing) 4 Location: ICM Ground Floor Room 2 Chair: Dr. Christian Hagenlocher, University of Stuttgart, Germany	Micro: Ablation, drilling, micro-cutting and micro-joining 6 Location: ICM Ground Floor Room 3 Chair: Prof. Daniel J. Förster, Hochschule München, Germany	AM: Laser powder bed fusion of metals, polymers and glass 2 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Dr. Anna Rosa Ziefuss, University Duisburg-Essen, Germany
10:30am - 12:00pm	Macro: Joining (welding and brazing) 5 Location: ICM Ground Floor Room 2 Chair: Christian Diegel, Technische Universität Ilmenau, Production Technology Group, Germany	Micro: Ablation, drilling, micro-cutting and micro-joining 7 Location: ICM Ground Floor Room 3 Chair: Prof. Andreas Michalowski, Institut für Strahlwerkzeuge (IFSW), Germany	AM: Laser powder bed fusion of metals, polymers and glass 3 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Dr. Carlos Doñate Buendía, University Jaume I, Spain
2:00pm - 3:30pm	Macro: Joining (welding and brazing) 6 Location: ICM Ground Floor Room 2 Chair: Josefine Lemke, Fraunhofer IPK, Germany	Micro: Ablation, drilling, micro-cutting and micro-joining 8 Location: ICM Ground Floor Room 3	Macro: System technology and process control 1 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Dr. Simon Olschok, RWTH Aachen University, Germany
4:00pm - 5:30pm	Macro: Joining (welding and brazing) 7 Location: ICM Ground Floor Room 2 Chair: Gwenn Pallier, Cailabs, France	Micro: Ablation, drilling, micro-cutting and micro-joining 9 Location: ICM Ground Floor Room 3 Chair: Dr. Matthias Domke, Vorarlberg University of Applied Sciences, Austria	Macro: System technology and process control 2 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Thomas Kaster, RWTH Aachen University, Germany
7:00pm - 11:00pm	LiM 2025 Evening Reception Location: Augustiner-Keller

Date: Thursday, 26/June/2025
6:00am - 7:30am	Keep Lasers Running Location: TBA
8:30am - 10:00am	Macro: Surface treatment and cladding 1 Location: ICM Ground Floor Room 2 Chair: Alexander Wittmann, Institute of Photonic Technologies, FAU Erlangen-Nürnberg, Germany	Micro: Processing and generation of nanostructures and nanoparticles Location: ICM Ground Floor Room 3 Chair: Dr. Isabel Ayerdi, Asociación Centro tecnológico Ceit, Spain	AM: Laser-based additive manufacturing 1 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Dr. Francisco Cordovilla, Universidad Politécnica de Madrid, Spain
10:30am - 12:00pm	Macro: Surface treatment and cladding 2 Location: ICM Ground Floor Room 2 Chair: Dr. Thomas Seefeld, BIAS - Bremer Institut für angewandte Strahltechnik GmbH, Germany	Micro: Surface patterning, thin film processing and functionalization 3 Location: ICM Ground Floor Room 3	AM: Laser-based additive manufacturing 2 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Lisa Matthäus, Friedrich-Schiller-Universität Jena, Germany
2:00pm - 3:30pm	Macro: In situ radiography and monitoring Location: ICM Ground Floor Room 2 Chair: Dr. Chu Lun Alex Leung, University College London, United Kingdom	Micro: Surface patterning, thin film processing and functionalization 4 Location: ICM Ground Floor Room 3	AM: System engineering, process control and monitoring 1 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Jan-Hendrik Koch, Fraunhofer IPT, Germany
4:00pm - 5:30pm	Macro: Fundamentals and process simulation Location: ICM Ground Floor Room 2 Chair: Tobias Florian, Tu Wien, Austria	Micro: Surface patterning, thin film processing and functionalization 5 Location: ICM Ground Floor Room 3 Chair: Dr. Cyril Mauclair, LPhiA, France	AM: System engineering, process control and monitoring 2 Location: ICM Ground Floor Room B0 - Hall B0 Chair: Florian Spengler, Laser Zentrum Hannover e.V., Germany