Conference Agenda
Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).
Please note that all times are shown in the time zone of the conference. The current conference time is: 18th June 2025, 08:50:13am CEST
|
|
|
Program for LiM 2025 |
| Date: Monday, 23/June/2025 | |
| 8:30am - 10:00am | Macro: Cutting 1 Location: ICM Room 2 Session Chair: Leander Schmidt, Technische Universität Ilmenau, Germany |
| 8:30am - 10:00am | Micro: Multiphoton processes Location: ICM Room 3 Session Chair: Franziska Chalupa-Gantner, TU Wien, Austria |
| 8:30am - 10:00am | Micro: Fundamentals: optics, phonics, and simulation Location: ICM Room B0 Session Chair: Maximilian Spellauge, Munich University of Applied Sciences, Germany |
| 10:30am - 12:30pm | WLT Award Ceremony & LiM Plenary Location: ICM Room 13b Session Chair: Prof. Jean Pierre Bergmann, Technische Universität Ilmenau, Germany |
| 2:00pm - 3:30pm | Macro: Cutting 2 Location: ICM Room 2 Session Chair: Prof. Barbara Previtali, Politecnico di Milano, Italy |
| 2:00pm - 3:30pm | Micro: Ablation, drilling, micro-cutting and micro-joining 1 Location: ICM Room 3 Session Chair: Prof. Inka Manek-Hönninger, Université de Bordeaux, France |
| 2:00pm - 3:30pm | Micro: Surface patterning, thin film processing and functionalization 1 Location: ICM Room B0 Session Chair: Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Germany |
| 4:00pm - 5:30pm | Macro: Cutting 3 Location: ICM Room 2 Session Chair: Dr. Madlen Borkmann, Fraunhofer Institute for Material and Beam Technology IWS, Germany |
| 4:00pm - 5:30pm | Micro: Ablation, drilling, micro-cutting and micro-joining 2 Location: ICM Room 3 Session Chair: Emrah Uluz, Fraunhofer-Institut for Laser Technology, Germany |
| 4:00pm - 5:30pm | Micro: Surface patterning, thin film processing and functionalization 2 Location: ICM Room B0 Session Chair: Volkher Onuseit, Wissenschaftliche Gesellschaft Lasertechnik e.V., Germany |
| 5:30pm - 7:00pm | Happy Hour + Mentoring Event Location: Meeting zone within the Networking + Catering area |
| Date: Tuesday, 24/June/2025 | |
| 6:00am - 7:30am | Keep Lasers Running Location: Announced after registration Detailed information on the route, schedule and registration procedure will follow. |
| 8:30am - 10:00am | WoPC Plenary Location: ICM Ground Floor / 1st Floor Room 1 |
| 10:30am - 12:00pm | Macro: Joining (welding and brazing) 1 Location: ICM Room 2 Session Chair: Prof. Jean Pierre Bergmann, Technische Universität Ilmenau, Germany |
| 10:30am - 12:00pm | Micro: Ablation, drilling, micro-cutting and micro-joining 3 Location: ICM Room 3 Session Chair: Dr. Gediminas Račiukaitis, FTMC - Center for Physical Sciences and Technology, Lithuania |
| 10:30am - 12:00pm | AM: Laser metal deposition 1 Location: ICM Room B0 Session Chair: Annika Bohlen, BIAS - Bremer Institut für angewandte Strahltechnik GmbH, Germany |
| 2:00pm - 3:30pm | Macro: Joining (welding and brazing) 2 Location: ICM Room 2 Session Chair: Ronald David Pordzik, Bremer Institut für angewandte Strahltechnik GmbH, Germany |
| 2:00pm - 3:30pm | Micro: Ablation, drilling, micro-cutting and micro-joining 4 Location: ICM Room 3 Session Chair: Prof. Luis A Angurel, University of Zaragoza, Spain |
| 2:00pm - 3:30pm | AM: Laser metal deposition 2 Location: ICM Room B0 Session Chair: Dr. Mohamad Bayat, Technical University of Denmark - DTU, Denmark |
| 2:00pm - 3:30pm | Advanced Laser Processing: Fundamentals and Applications (LiM-CLEO joint session) Location: Hall A1 Room A12 Session Chair: Dr. Marwan Abdou Ahmed, Universität Stuttgart, Germany |
| 4:00pm - 5:30pm | Macro: Joining (welding and brazing) 3 Location: ICM Room 2 Session Chair: Michael Sawannia, University of Stuttgart, Germany |
| 4:00pm - 5:30pm | Micro: Ablation, drilling, micro-cutting and micro-joining 5 Location: ICM Room 3 Session Chair: Dr. Tobias Menold, Institut für Strahlwerkzeuge (IFSW), Germany |
| 4:00pm - 5:30pm | AM: Laser powder bed fusion of metals, polymers and glass 1 Location: ICM Room B0 Session Chair: Dr. Maria Farsari, FORTH, Greece |
| Date: Wednesday, 25/June/2025 | |
| 6:00am - 7:30am | Keep Lasers Running Location: Announced after registration Detailed information on the route, schedule and registration procedure will follow. |
| 8:30am - 10:00am | Macro: Joining (welding and brazing) 4 Location: ICM Room 2 Session Chair: Dr. Christian Hagenlocher, University of Stuttgart, Germany |
| 8:30am - 10:00am | Micro: Ablation, drilling, micro-cutting and micro-joining 6 Location: ICM Room 3 Session Chair: Prof. Daniel J. Förster, Hochschule München, Germany |
| 8:30am - 10:00am | AM: Laser powder bed fusion of metals, polymers and glass 2 Location: ICM Room B0 Session Chair: Dr. Anna Rosa Ziefuss, University Duisburg-Essen, Germany |
| 10:30am - 12:00pm | Macro: Joining (welding and brazing) 5 Location: ICM Room 2 Session Chair: Christian Diegel, Technische Universität Ilmenau, Production Technology Group, Germany |
| 10:30am - 12:00pm | Micro: Ablation, drilling, micro-cutting and micro-joining 7 Location: ICM Room 3 Session Chair: Prof. Andreas Michalowski, University of Stuttgart, Germany |
| 10:30am - 12:00pm | AM: Laser powder bed fusion of metals, polymers and glass 3 Location: ICM Room B0 Session Chair: Dr. Carlos Doñate Buendía, University Jaume I, Spain |
| 2:00pm - 3:30pm | Macro: Joining (welding and brazing) 6 Location: ICM Room 2 Session Chair: Josefine Lemke, Fraunhofer IPK, Germany |
| 2:00pm - 3:30pm | Micro: Ablation, drilling, micro-cutting and micro-joining 8 Location: ICM Room 3 Session Chair: Prof. Thomas Graf, University of Stuttgart, Germany |
| 2:00pm - 3:30pm | Macro: System technology and process control 1 Location: ICM Room B0 Session Chair: Dr. Simon Olschok, RWTH Aachen University, Germany |
| 4:00pm - 5:30pm | Macro: Joining (welding and brazing) 7 Location: ICM Room 2 Session Chair: Gwenn Pallier, Cailabs, France |
| 4:00pm - 5:30pm | Micro: Ablation, drilling, micro-cutting and micro-joining 9 Location: ICM Room 3 Session Chair: Dr. Matthias Domke, Vorarlberg University of Applied Sciences, Austria |
| 4:00pm - 5:30pm | Macro: System technology and process control 2 Location: ICM Room B0 Session Chair: Thomas Kaster, RWTH Aachen University, Germany |
| 7:00pm - 11:00pm | LiM 2025 Evening Reception Location: Augustiner-Keller |
| Date: Thursday, 26/June/2025 | |
| 6:00am - 7:30am | Keep Lasers Running Location: Announced after registration Detailed information on the route, schedule and registration procedure will follow. |
| 8:30am - 10:00am | Macro: Surface treatment and cladding 1 Location: ICM Room 2 Session Chair: Alexander Wittmann, Institute of Photonic Technologies, FAU Erlangen-Nürnberg, Germany |
| 8:30am - 10:00am | Micro: Processing and generation of nanostructures and nanoparticles Location: ICM Room 3 Session Chair: Dr. Isabel Ayerdi, Asociación Centro tecnológico Ceit, Spain |
| 8:30am - 10:00am | AM: Laser-based additive manufacturing 1 Location: ICM Room B0 Session Chair: Dr. Francisco Cordovilla, Universidad Politécnica de Madrid, Spain |
| 10:30am - 12:00pm | Macro: Surface treatment and cladding 2 Location: ICM Room 2 Session Chair: Dr. Thomas Seefeld, BIAS - Bremer Institut für angewandte Strahltechnik GmbH, Germany |
| 10:30am - 12:00pm | Micro: Surface patterning, thin film processing and functionalization 3 Location: ICM Room 3 Session Chair: Dr. Robert Kuschmierz, TU Dresden, Germany |
| 10:30am - 12:00pm | AM: Laser-based additive manufacturing 2 Location: ICM Room B0 Session Chair: Lisa Matthäus, Friedrich-Schiller-Universität Jena, Germany |
| 2:00pm - 3:30pm | Macro: In situ radiography and monitoring Location: ICM Room 2 Session Chair: Dr. Chu Lun Alex Leung, University College London, United Kingdom |
| 2:00pm - 3:30pm | Micro: Surface patterning, thin film processing and functionalization 4 Location: ICM Room 3 Session Chair: Prof. Juan Pou, University of Vigo, Spain |
| 2:00pm - 3:30pm | AM: System engineering, process control and monitoring 1 Location: ICM Room B0 Session Chair: Jan-Hendrik Koch, Fraunhofer IPT, Germany |
| 4:00pm - 5:30pm | Macro: Fundamentals and process simulation Location: ICM Room 2 Session Chair: Tobias Florian, Tu Wien, Austria |
| 4:00pm - 5:30pm | Micro: Surface patterning, thin film processing and functionalization 5 Location: ICM Room 3 Session Chair: Dr. Cyril Mauclair, LPhiA, France |
| 4:00pm - 5:30pm | AM: System engineering, process control and monitoring 2 Location: ICM Room B0 Session Chair: Florian Spengler, Laser Zentrum Hannover e.V., Germany |
Contact and Legal Notice · Contact Address:  Privacy Statement · Conference: LiM 2025 |
Conference Software: ConfTool Pro 2.6.154 © 2001–2025 by Dr. H. Weinreich, Hamburg, Germany |