Enhanced Inconel 625 coatings produced by High-Speed Laser Cladding

Ane Solana, Josu Leunda, Carlos Soriano

Tekniker, Spain

Laser-modified wire arc cladding

Hana Šebestová, Jan Gross, Libor Mrňa

Institute of Scientific Instruments of the Czech Academy of Sciences, Czech Republic

About the Hard Particle Transport and Incorporation in High-Speed Laser Melt Injection

Philipp Warneke¹, Lucas Westermeyer¹, Annika Bohlen¹, Thomas Seefeld^1,2

1: BIAS - Bremer Institut für angewandte Strahltechnik GmbH, Klagenfurter Straße 5, 28359 Bremen, Germany; 2: MAPEX Center for Materials and Processes, Universität Bremen, Bibliothekstraße 1, 28359 Bremen, Germany

Laser melt injection of spherical fused tungsten carbide and niobium carbide on aluminium bronze substrates for enhanced cavitation erosion resistance

Minkeshkumar Ramoliya¹, Annika Bohlen¹, Thomas Seefeld^1,2

1: Bremer Institut für angewandte Strahltechnik GmbH, Germany; 2: MAPEX Center for Materials and Processes - University of Bremen, Germany

Reconfigurable laser head for laser-based processing in the automotive sector.

Eva Vaamonde¹, Andrés González¹, David Diego Vallejo¹, Adrián Pérez¹, Joaquin Piccini², Horacio Carlos Nadale²

1: AIMEN Technology Center, Spain; 2: Gestamp, Spain

Applying laser welding in power plant part repair

Isarawit Chaopanich, Vissaruud Preebut, Watit Luanngam, Chattapat Khamenkit, Wirat Sirisappaibun

egat, Thailand

Invited Talk: Compact and easy-to-use device for automated laser-based synthesis of colloidal nanoparticles

Friedrich Waag

Nanonium GmbH, Katernberger Straße 107, 45327 Essen, Germany

Using lasers to produce nanofibers

Félix Quintero^1,4, Joaquín Penide², Raúl Barciela^1,4, Mónica Fernández-Arias^1,4, Antonio Riveiro^4,5, Jesús del Val³, Rafael Comesaña^4,5, Juan Pou^1,4

1: Applied Physics Department, University of Vigo, Spain; 2: Medical & Engineering Technologies, GMIT, Ireland; 3: Defense University Center, Spanish Naval Academy, Spain; 4: CINTECX, University of Vigo, LaserON, Spain; 5: Materials Engineering, Applied Mechanics and Const. Dept. University of Vigo, Spain

Antibiofouling behaviour of Low Spatial Frequency LIPSS (LSFL) via femtosecond Laser Surface Texturing

Liliana Papa^1,2, Adam Hansson^4,5, Caterina Gaudiuso², Annalisa Volpe^1,2, Francesco Paolo Mezzapesa², Matias Berglin^3,4, Anders Lundgren³, Antonio Ancona^1,2,5

1: Intercollegiate Department of Physics “M. Merlin”, University of Bari and Polytechnic University of Bari, Via G. Amendola 173, 70125 Bari, Italy; 2: National Research Council (CNR), Institute for Photonics and Nanotechnologies (IFN), Via G. Amendola 173, 70125 Bari, Italy; 3: Department of Chemistry and Molecular Biology, University of Gothenburg, Gothenburg 40530,Sweden; 4: Department of Chemistry and Materials, RISE Research Institutes of Sweden, Borås 50115, Sweden; 5: Department of Engineering Science, University West, Trollhättan, 461 86, Sweden

Pulsed Laser Ablation in Liquids Using Donut-Shaped Beams: A new approach for nanoparticle size control

Abdel Rahman Altakroury¹, Oleksandr Gatsa², Farbod Riahi¹, Zongwen Fu¹, Miroslava Flimelová², Andrei Samokhvalov¹, Stephan Barcikowski³, Carlos Doñate-Buendía^1,4, Alexander V. Bulgakov², Bilal Gökce¹

1: Chair of Materials Science and Additive Manufacturing, School of Mechanical Engineering and Safety Engineering, University of Wuppertal; 2: HiLASE Centre, FZU - Institute of Physics of the Czech Academy of Sciences; 3: Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen; 4: GROC·UJI, Institute of New Imaging Technologies, Universitat Jaume I

Laser gas and centrifugal atomization

Yuri Chivel

MerPhotonics, France

From Synthesis to Cure: Laser Synthesized Copper Sulphide Nanoparticles in Biomedical Applications

Umut Taylan^1,2, Samet Akçimen², Ismail Eş^2,3, Beyza Nur Küçük², Esra Kendir Tekgül², Çağatay Çelebi⁴, Yasin Kumru⁴, Hayrettin Köymen^2,4, Fatih Inci², Bülend Ortaç²

1: Swiss Federal Laboratories for Materials Science and Technology (Empa), Feuerwerkerstrasse 39, 3600, Thun, Switzerland; 2: National Nanotechnology Research Center (UNAM), Institute of Materials Science and Nanotechnology, Bilkent University, 06800 Ankara, Türkiye; 3: Department of Engineering Science, Institute of Biomedical Engineering (IBME), University of Oxford, OX3 7DQ Oxford, UK; 4: Acoustic and Underwater Technologies Research Center (BASTA), Department of Electrical and Electronics Engineering, Bilkent University, 06800 Ankara, Türkiye

Melt pool and wire incorporation stability during laser Directed Energy Deposition

Joerg Volpp, Fredrik Sikström

Department of Engineering Science, University West, 461 86 Trollhättan, Sweden

Beam-Shaping - The easiest solution to increase benefits for Laser Powder Bed Fusion

Thinaut Atché, Aymen Chargui, Adeline Orieux, Gwenn pallier, Guillaume Labroille

Cailabs, France

Laser-assisted FFF for high-performance 3D printed components with enhanced mechanical strength

Andres González, Camilo Prieto, David Diego-Vallejo, Zaira M.Berdiñas, Alberto Pedreira, Ander Reizábal, Pablo Romero-Rodriguez

AIMEN Technology Center, Pol.Cataboi s/n, Porriño (Pontevedra), Spain

Production of linear support structures made of glass using additive manufacturing

Franz Hesse, Andreas Herrmann, Jörg Hildebrand, Jean Pierre Bergmann

Technische Universität Ilmenau, Ilmenau, Germany

Impact of CO2 Laser Radiation on Optical Fibers’ Waveguiding Characteristics in the Laser Glass Deposition Process

Florian Spengler^1,2, Sven-Olaf Waldhauer¹, Anna Karoline Rüßeler^1,2, Moritz Hinkelmann^1,2, Stefan Kaierle^1,2,3, Dietmar Kracht^1,2,4

1: Laser Zentrum Hannover e.V., Hollerithallee 8, 30419 Hannover, Germany; 2: Cluster of Excellence PhoenixD (Photonics, Optics, and Engineering Innovation AcrossDisciplines), Hannover, Germany; 3: Institut für Transport- und Automatisierungstechnik, An der Universität 2, 30823 Garbsen, Germany; 4: Institut für Photonik, Nienburger Str. 17, 30167 Hannover, Germany

Comparative study of powder bed fusion of highly alloyed Al-Li using a CW and an ultrashort pulse laser

Lisa Matthäus¹, Hagen Peter Kohl¹, Dongmei Liu¹, Stephanie Lippmann¹, Stefan Nolte^1,2

1: Friedrich Schiller University Jena, Germany; 2: Fraunhofer Institute for Applied Optics and Precision Engineering IOF

Adhesive-free joining of paper through laser-based material modification

Florian Lull¹, Volker Franke¹, Fabian Kayatz², Mathias Kott², Grethel Iturralde², Robert Protz³, André Lehmann³, Christer-Clifford Schenke⁴, Stephan Kronenberger⁴

1: Fraunhofer IWS; 2: Fraunhofer IVV; 3: Fraunhofer IAP; 4: Fraunhofer IWU

Production of Carbon Black/Polyamide 11 Coatings on Metallic Components by Directed Energy Deposition with a Diode Laser

Alexander Wittmann^1,2, Srijita Chakraborty¹, Colin Beck³, Hannes Freiße⁴, Dominic Bartels^1,2,5, Sebastian-Paul Kopp^1,2,5, Michael Schmidt^1,2,5

1: Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Konrad-Zuse-Straße 3/5, 91052 Erlangen, Germany; 2: Erlangen Graduate School in Advanced Optical Technologies (SAOT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Paul-Gordan-Straße 6, 91052 Erlangen, Germany; 3: BLC Lasercladding GmbH, Im Berggarten 12, 56470 Bad Marienberg (Westerwald), Germany; 4: Kugler Bimetal SA, Chem. du Château-Bloch 17, 1219 Le Lignon, Switzerland; 5: Bayerisches Laserzentrum GmbH (BLZ), Konrad-Zuse-Straße 2/6, 91052 Erlangen, Germany

Polishing of metals with femtosecond GHz-burst laser

Théo Guilberteau^1,2, Manon Lafargue^1,3, John Lopez¹, Laura Gemini², Inka Manek-hönniger¹

1: Université de Bordeaux-CNRS-CEA, CELIA UMR 5107, 33405 Talence, France; 2: ALPhANOV, Rue François Mitterrand, 33400 Talence, France; 3: Amplitude, Cité de la Photonique, 11 Avenue de Canteranne, 33600 Pessac, France

Surrogate model-based optimization: Utilizing Neural Networks to Benchmark Process Parameter Development Strategies for Laser Polishing of Metals

Vincent Benedikt Ley, Sven Linden, Moritz Kuepper, Edgar Willenborg

Fraunhofer Institute for Laser Technology, Germany

Laser Polishing with Quasi-Beamforming for Enhanced Optical Quality for Miniaturized Optics

Lämmler Sven, Bischof David, Michler Markus

Fachhochschule Ostschweiz - Buchs, Switzerland

Selective laser induced metallization of dielectrics for electronic applications

Modestas Sadauskas, Šarūnas Mickus, Evaldas Kvietkauskas, Viktorija Vrubliauskaitė, Justina Žemgulytė, Paulius Ragulis, Karolis Ratautas, Romualdas Trusovas

FTMC - Fizinių ir technologijos mokslų centras, Lithuania

UV laser nanostructuring for the selective growth of high-quality III-V semiconductor layers

Julian Hürtgen¹, Serhiy Danylyuk¹, Yilmaz Dikme²

1: Fraunhofer Insitute for Laser Technology ILT, Germany; 2: Element 3-5 GmbH, Germany

Demonstration of etch depth limitation by evanescent-light-assisted etching of n-GaAs

Kaito Miyakoda¹, Hirofumi Hidai^1,2, Sho Itoh^1,3, Souta Matsusaka¹

1: Department of Mechanical Engineering, Chiba University, Japan; 2: Molecular Chirality Research Center, Chiba University, Japan; 3: Faculty of Engineering Technology and Science, Higher Collerges of Technology, United Arab Emirates

Determining the electric properties and proportionality factor of digitally printed and laser-sintered strain gauges for tensile stress measurement

Samuel Moritz Fink, Martin Shulevski

Fraunhofer-Institut für Lasertechnik ILT, Germany

Modification mechanisms on 4HN-SiC and 6H-SiC wafers using picosecond laser ablation: a comparative study of Deep-UV and UV technologies

YIYUN KANG¹, Mareike Schäfer², Alexej Belakowski¹, Fabian Soerensen¹, Ralf Knappe¹, Johannes L'huillier²

1: Coherent Kaiserslautern GmbH, Germany; 2: Institut für Oberflächen und Schichttechnik GmbH

Micro-Polishing of 4H-SiC Surfaces Using Femtosecond Laser Vector Beams and Wobble-Based Scanning

Chung-Wei Cheng^1,2, Che Tseng¹, Jia Fan Guo^1,2

1: National Yang Ming Chiao Tung University, Taiwan; 2: Heterogeneously-integrated Silicon Photonic Integration Center, National Taiwan University of Science and Technology, No. 43, Section 4, Keelung Road, Taipei 106, Taiwan

Effect of interlayer deformation on microstructure of laser additively manufactured Inconel 625

Abeer Mithal^1,2, Vijay Shankar Sridharan^1,2, Nicholas Tan², Youxiang Chew², Sridhar Idapalapati¹

1: School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Republic of Singapore; 2: Advanced Remanufacturing and Technology Centre, Agency for Science Technology and Research, 3 Cleantech Loop, #01-01 Cleantech Two, Singapore 637143, Republic of Singapore

Laser-based powder fixation on textiles for highly functionalized coatings

Yashas Shivakumar, Annika Gambke, Andreas Neudeck, Julia Ullrich

Textile Research Institute Thuringia-Vogtland e. V. (TITV e. V.), Zeulenrodaer Str. 42, 07973 Greiz, Germany

Virtual PID-Controlled Thermal Model for Enhanced Stability in High Mass Flow Directed Energy Deposition

Francisco Cordovilla¹, Piera Álvarez², María Ángeles Montealegre², Marcos Diaz¹, Sandra Chacón-Fenández¹, Ángel García-Beltrán¹, Ignacio Angulo¹, José L. Ocaña¹

1: Universidad Politécnica de Madrid, Spain; 2: Ikergune A.I.E., San Antolin, 3, 20870 Elgoibar, Guipúzcoa, Spain

Blister-Actuated Laser-Induced Forward Transfer (BA-LIFT): Dynamics and Numerical Modeling for Process Optimization

Juan José Moreno Labella, David Munoz-Martin, David Canteli, Cristina Muñoz-Garcia, Miguel Morales, Carlos Molpeceres

Centro Láser, Universidad Politécnica de Madrid, c/Alan Turing 1, 28038 Madrid, Spain

30 years of process monitoring and still enough welding faults to detect

Christoph Franz, Sören Hollatz

4D Photonics GmbH, Germany

High Power Amplified Industrial Optical Coherence Tomography (OCT) System for Deep Weld Keyhole Imaging

Emma R. Howard, Paul J. L. Webster

IPG Photonics Canada

Enhanced OCT signal interpretability in deep penetration laser welding of aluminium

Ronald David Pordzik¹, Eveline Reinheimer², Marcel Möbus¹, Thomas Seefeld^1,3

1: BIAS - Bemer Institut für angewandte Strahltechnik GmbH, Klagenfurter Straße 5, 28359 Bremen, Germany; 2: IFSW - Institut für Strahlwerkzeuge, Universität Stuttgart, Pfaffenwaldring 43, 70569 Stuttgart, Germany; 3: MAPEX Center for Materials and Processes, Universität Bremen, Bibliothekstraße 1, Bremen 28359, Germany

In-situ and ex-situ synchrotron X-ray diffraction of the pulsed laser beam welding process considering different laser pulse shapes and laser spot arrangements

Andreas Herrmann¹, Marc Seibold¹, Klaus Schricker², Yunhui Chen⁴, Leander Schmidt¹, Hannes Friedmann¹, Christian Diegel¹, Fabian Fröhlich¹, Stefan Eichler¹, Alexander Rack³, Veijo Honkimäki³, Jean Pierre Bergmann¹

1: Technische Universität Ilmenau, Ilmenau, Germany; 2: Brandenburg University of Technology Cottbus-Senftenberg, Cottbus, Germany; 3: European Synchrotron Radiation Facility – The European Synchrotron, Grenoble, France; 4: RMIT University, Melbourne, Australia

Current Advances in Data-driven Machine Learning for Temporal Strain Analysis in Laser Beam Welding Using High-speed Synchrotron X-ray Technique

Joseph Bophelo Morake, Andreas Herrmann, Leander Schmidt, Jean Pierre Bergmann

Technische Universität Ilmenau, Production Technology Group, Gustav-Kirchhoff-Platz 2, 98693 Ilmenau

Improving pyrometric temperature measurements for quality monitoring of laser processes

David Traunecker, Michael Jarwitz, Andreas Michalowski

University of Stuttgart, Institut fuer Strahlwerkzeuge (IFSW), Germany

High speed femtosecond laser battery processing

Eric AUDOUARD¹, Marie FLEUREAU¹, Quentin MOCAER¹, Amina ARAHOUNI², Jean Michel ROMANO², Frédéric MERMET²

1: Amplitude, Pessac, FRANCE; 2: IREPA laser, Illkirch, FRANCE

Micro-processing improvement with a 0.07 uniformity square top-hat at 200fs, 400µJ and 1030nm, based on Multi-Plane Light Conversion

Mahmoud Ziat¹, Dmitry Nuzhdin¹, Kerim Yildirim², Mian Monib Ur Rehman², Balasubramanian Nagarajanb², Gwenn Pallier¹, Guillaume Labroille¹, Sylvie Castagne²

1: Cailabs, France; 2: KU Leuven, Belgium

Laser-Based Drying of PEMFC Catalyst Layers

Manuella Guirgues

Fraunhofer ILT, Germany

Scaling effects of fast laser drying processes in battery production

Delil Demir

Fraunhofer Institute for Laser Technology ILT, Germany

Efficiency of Spatial Shaping of Femtosecond Laser Beams with a Feedback Loop for Surface Patterning

Bahia Najih^2,3, Cyril Mauclair¹, Martin Delaigue², Florent Bourquard³

1: Univ Angers LPHIA SFR MATRIX F-49000 Angers France; 2: Amplitude laser, laboratoire Hubert Curien, France; 3: Laboratoire Hubert Curien UMR 5516 CNRS Université Jean Monnet Saint-Étienne France

Efficiency loss in ultrafast laser ablation due to spatial light modulator limitations in beam shaping

Bahia Najih^2,3, Martin Delaigue², Florent Bourquard³, Cyril Mauclair¹

1: Univ Angers, LPHIA, SFR MATRIX, F-49000 Angers, France; 2: Amplitude, Pessac, France; 3: Laboratoire Hubert Curien, UMR 5516 CNRS, Université Jean Monnet, Saint-Étienne, France

Investigation of a melt pool temperature control for the additive manufacturing process of tool components using laser directed energy deposition

Eike Tim Koopmann¹, Leonard Simon Plutz¹, Leonard Schmitz¹, Christoph Kaminsky¹, Henning Zeidler²

1: Mercedes-Benz AG, Sindelfingen, Germany; 2: Institute for Machine Elements, Design and Manufacturing, TU Bergakademie Freiberg, Freiberg, Germany

Monitoring of heat accumulation during laser cladding process

Martin Novak, Adam Cermak, Pavel Zeman, Petr Kolar

Department of Production Machines and Equipment (RCMT), Faculty of Mechanical Engineering, Czech Technical University in Prague, Technicka Street 4, 16000, Prague 6, Czech Republic

Enhancing Layer Adhesion in Material Extrusion AM with Adaptive Laser Preheating Integrated in Printhead

Dennis Meisner¹, Nikitas Kaftiranis¹, Frederik Maiwald¹, Petra Rapp², Stefan Hierl¹

1: OTH Regensburg, Germany; 2: Multec GmbH, Germany

Combining additive and subtractive manufacturing by cw- and ultrafast laser sources to create transient heat dissipating structures for temperature field optimization

Felix Teufel^1,2, Johannes Michel¹, Manuel Henn¹, Jake Benzing³, Maximilian Frey⁴, Nico Ulff⁴, Volker Schulze⁴, Frederik Zanger⁴, Christian Hagenlocher¹, Thomas Graf¹

1: Institut für Strahlwerkzeuge (IFSW) Universität Stuttgart, Germany; 2: University of Stuttgart, Graduate School of Excellence advanced Manufacturing Engineering (GSaME); 3: National Institute of Standards and Technology (NIST) Fatigue and Fracture Group, USA; 4: Karlsruhe Institute of Technology (KIT), wbk Institute of Production Science

Fast spatial pulse distribution for Laser Powder Bed Fusion (PBF-LB/M)

Daniel Heussen¹, Wilhelm Meiners¹, Tim Lantzsch¹, Niklas Praetzsch¹, Thomas Laag¹, Constantin Leon Haefner^1,2

1: Fraunhofer Institute for Laser Technology ILT, Aachen, Germany; 2: RWTH Aachen University - Chair for Laser Technology LLT, Aachen, Germany

Challenges for integrating a laser micro-machining laser into an SLM (Selective Laser Melting) machine.

Julien DUPUY¹, Alexandre Miazek¹, Julien Magnien², Yves Hernandez¹

1: Multitel, Belgium; 2: Sirris, Belgium

Modeling and analysis of laser drying processes for wet-coated battery electrodes

Teng Chen¹, Orcun Atasever¹, Jan-Hendrik Koch¹, Florian Hüsing¹, Christian Brecher^1,2

1: Fraunhofer Institute for Production Technology IPT, Steinbachstraße 17, 52074 Aachen, Germany; 2: Laboratory for Machine Tools and Production Engineering WZL of the RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany

Challenges and opportunities in using physics-informed neural networks for adaptive laser welding control

Sattar Ghasemi Goneyrani, Ahmad Reshad Bakhtari, Pasquale Franciosa

Warwick Manufacturing Group, The University of Warwick, Coventry CV4 7AL, United Kingdom

Enhancing Copper Laser Welding Through Multi-Physics Simulations of Optimized Beam Shapes

Avinash Kumar¹, Carlos Duran², Tobias Florian², Constantin Zenz², Adeline Orieux¹, Gwenn Pallier¹, Guillaume Labroille¹, Andreas Otto²

1: Cailabs, France; 2: Vienna University of Technology, Austria

Vapour flow optimization by means of coherent beam combining beam shaping strategies to reduce spatter formation in laser welding

Felix Zaiß¹, Philipp Jablonski¹, Christian Diegel², Jean Pierre Bergmann², Christian Hagenlocher¹, Thomas Graf¹

1: Institut für Strahlwerkzeuge (IFSW), University of Stuttgart, Germany; 2: Production Technology Group, Technische Universität Ilmenau, Germany

Heat and flow field optimization of beam shaping in application to liquid phase processing of aluminium-magnesium alloys.

Patrick O'Toole, Steffen Fritz, Christian Hagenlocher, Thomas Graf

IFSW University of Stuttgart, Germany

Method to determine the temperature dependent refractive index and extinction coefficient of liquid metals based on thermal emission.

Michael Sawannia¹, Julien Daligault², John Powell¹, Morgan Dal², Christian Hagenlocher¹, Thomas Graf¹

1: University of Stuttgart, Germany; 2: PIMM Laboratory, Arts et Métiers Institute of Technology (Paris)

Indentation technique based on laser-induced shock waves for material testing with moving specimen

Laurin Schaper¹, Tim Radel^1,2

1: BIAS - Institute of Applied Beam Technology, 28359 Bremen, Germany; 2: MAPEX Center for Materials and Processes, Postfach 330 440, 28334 Bremen, Germany

Fabrication of Sub-10 µm Size Asymmetric Microstructures by Mask Projection Laser Ablation

Umut Taylan, Benjamin Minnig, Nicolas Zaugg, Patrik Hoffmann

Swiss Federal Laboratories for Materials Science and Technology (EMPA), Switzerland

Effect of Thin-Film Overcoat Thickness on Femtosecond Laser Damage Resistance

jing meng

Optimax Systems Inc. , United States of America

Laser Structuring of Thin Glass using a Surface-Absorbing Layer

Eric YJ Vancoille

JohTho Engineering, Belgium

Laser nanostructuring of diamond-like carbon coatings deposited by PECVD on PC substrates

Diego Gallego, Aldara Pan, Iñigo Ramón, Gemma García Mandayo, Ainara Rodríguez, Isabel Ayerdi

Asociación Centro tecnológico Ceit, Spain

Laser-Generated Reflection Gratings on Shape Memory Actuators

Damian L. Haske¹, Jan Marx¹, Marvin Schuleit¹, Evgeny L. Gurevich², Cemal Esen¹, Andreas Ostendorf¹

1: Applied Laser Technologies, Ruhr University Bochum, Universitätsstraße 150, 44801 Bochum, Germany; 2: Laser Center (LFM), University of Applied Sciences Münster, Stegerwaldstraße 39, 48565 Steinfurt, Germany

Macro-SLM - A cost efficient powder bed approach for cubic meter steel components

Andreas Kotsch, Martin Erler, Sebastian Weinhold, Michael Pfeifer, André Streek

Laserinstitut Hochschule Mittweida, Germany

Scalable Additive Repair using Powder Bed Fusion with Laser Beam

Myriam Maalaoui¹, Hans-Henrik Westermann², Jens Niedermeyer¹, Ina Meyer¹, Roland Lachmayer¹

1: Institute of Product Development (IPeG), Leibniz University Hannover, Germany; 2: MTU Maintenance Hannover GmbH, Germany

Development of a centrifugal laser powder bed fusion system for additive manufacturing

Jan-Hendrik Koch¹, Florian Hüsing¹, Henning Janssen¹, Christian Brecher^1,2

1: Fraunhofer Institute for Production Technology IPT, Steinbachstraße 17, 52074 Aachen, Germany; 2: Laboratory for Machine Tools and Production Engineering WZL of the RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany

Laser-based additive manufacturing sustainability assesment and optimization by process and machine monitoring

Roberto Alonso, Alexandre Martín-Mestres, Iago Gil, Sara Carracelas, Jorge Luis Arias

AIMEN Technology Centre, Spain