Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

Please note that all times are shown in the time zone of the conference. The current conference time is: 29th Jan 2022, 06:17:29am CET

Program for LiM 2021
Micro: Surface Functionalization 2
Wednesday, 23/June/2021:
11:15am - 12:30pm

Session Chair: Martin Hohmann, Institute of Photonic Technologies (LPT), Germany
Location: Room 4
ICM 1st Floor 433

Show help for 'Increase or decrease the abstract text size'
11:15am - 11:30am

Molded parts with functional surfaces – how laser microstructuring can be used for low-cost mass products

Maik Steinbach, Jürgen Koch, Peter Jäschke, Stefan Kaierle, Ludger Overmeyer

Laser Zentrum Hannover e.V., Germany

Microstructuring via ultrashort pulse laser enables the targeted generation of functional surface structures. With this technology, progress in material behavior has been shown in tribological, optical and haptical properties, liquid wettability and cell adhesion. In cases where the effect is mainly based on the laser-generated microstructures instead of laser-induced chemical changes of the surface material, injection molding offers a possibility to make the usually high-priced laser surface functionalization accessible to low-cost mass products. This technique leaves the chemistry of the molded parts unaffected, which makes it especially attractive for biomedical applications. Molding inverts the surface topography and can be associated with resolution, durability and demoldability restrictions. We present our current results and findings on basic as well as on application-oriented issues. Selected applications including a technique for piracy protection are discussed.

11:30am - 11:45am

Towards optimization of femtosecond laser pulse nano-structuring for high-intensity laser interactions

Ulrich Teubner1,3, Imgrunt Jürgen1, Andreev Alexander1,2

1Institut für Laser und Optik, Hochschule Emden/Leer – University of Applied Sciences, Constantiaplatz 4, 26723 Emden, Germany; 2Sankt Petersburg State University, Sankt Petersburg, Russia; 3Institut für Physik, Carl von Ossietzky Universität Oldenburg, Ammerländer Heerstr. 114-118, 26111 Oldenburg, Germany

The interaction of intense femtosecond laser pulses with solid targets is a topic that has attracted large interest in science and applications. For many of the related experiments a large energy deposition or absorption and an efficient coupling to XUV- and/or X-ray photons and/or high energy particles is important. Here, beside improvements in laser pulse properties also those of the target are relevant. The present work investigates the formation of laser-induced periodic surface structures on massive metal targets by femtosecond laser pulses in vacuum. The experimental results and the ripple formation mechanisms have been analysed and interpreted with newly developed theoretical models. The present results contribute to a simple optimization of targets by nano-structuring their surface in-situ which leads to a significantly enhanced absorption and conversion efficiency into XUV emission, X-rays and/or high energy electrons and protons after irradiation with a subsequent intense laser pulse.

11:45am - 12:00pm

Targeting mass production of nano/micro textured surfaces by USP laser: the New Skin project

Girolamo Mincuzzi, Alexandra Bourtereau, Marc Faucon, Laura Gemini, Simon Nourry, Aurélien Sikora, Rainer Kling

Alphanov, Aquitaine Institute of Optic - Rue F. Mitterand 33400 Talence (France)

Ultra-Short Pulse laser texturing (USP-LT) is a key technology for functionalisation of materials surface. Although the texturing of ≈1m2 surfaces have been successfully shown, extend USP-LT over several m2 surfaces represents an issue due to the need of high P, and a difficult process control. The “New Skin” project could represent a turning point pushing the readiness of USP-LT with a significant up-scale of the production volume.
Here we show the preliminary results obtained with the implementation of a demonstrative pilot line based on a 350 W, fs laser and a polygon scanner. We report the optimisation of the structures morphology on steel when P exceeds few hundreds of watts as well as the impact of the repetition rate (up to 10 MHz) and the hatch. A roll-to-roll approach is proposed jointly with an in-line monitoring system based on scatterometry. Finally, possible applications and values propositions are introduced and discussed.

12:00pm - 12:15pm

In-line monitoring of submicron laser texturing: a test bench for scatterometry

Aurélien Sikora, Girolamo Mincuzzi, Rainer Kling

ALPhANOV, France

Laser Induced Periodic Surface Structures (LIPSSs) with a submicronic periodicity induce a variety of surface properties (iridescence, hydrophobicity, antibacterial, etc.). In-line monitoring of LIPSS dimensions is challenging since the resolution of optical based microscopy techniques is insufficient or unable to withstand with harsh, industrial environment. These issues can be overcome using indirect measurement techniques such as scatterometry. It makes possible an indirect measurement of LIPSS morphology by analysing the reflection and/or diffraction pattern of an incoming light having a known spectrum and polarisation. We show that by using a proper configuration, scatterometry is barely sensitive to vibrations and fast enough for in-line monitoring fitting industrial requirements. In the frame of the NewSkin H2020 project, a scatterometer has been integrated and tested in a roll-to-roll machine including a fast polygon scanner (up to 200 m/s) and a 350 W femtosecond laser targeting mass production of LIPSS for antibacterial stainless steel.

12:15pm - 12:30pm

Effects of various misalignments and beam impurities on creation of optical needle using Pancharatnam-Berry phase elements

Pavel Gotovski1,2, Paulius Slevas1,3, Sergej Orlov1, Orestas Ulsinas1,3, Antanas Urbas1,3

1Center for Physical Sciences and Technology, Vilnius University, Lithuania; 2Vilnius Gediminas Technical University, Faculty of Electronics, Lithuania; 3Workshop of Photonics


Contact and Legal Notice · Contact Address:
Privacy Statement · Conference: LiM 2021
Conference Software - ConfTool Pro 2.6.142
© 2001–2022 by Dr. H. Weinreich, Hamburg, Germany