Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

Please note that all times are shown in the time zone of the conference. The current conference time is: 27th Jan 2022, 10:23:54pm CET

Program for LiM 2021
Macro: Welding, Dissimilar Materials
Thursday, 24/June/2021:
2:45pm - 4:00pm

Session Chair: Oliver Seffer, Laser Zentrum Hannover e.V., Germany
Location: Room 1
ICM Ground Floor 125

Show help for 'Increase or decrease the abstract text size'
2:45pm - 3:00pm

Vapor plume behavior during a standalone laser pulse on the dissimilar aluminum/titanium interface: high-speed imaging with 810 nm band-pass filter

Manoj Raja Kumar, Iryna Tomashchuk, Jean-Marie Jouvard, Melanie Duband

Université de Bourgogne Franche-Comté, France

The understanding of plume behavior in dissimilar laser welding is little studied and can bring an insight to the concurrent vaporization process and keyhole dynamics. The present study is dedicated to the high-speed imaging and post-mortem characterization of a standalone Yb:YAG laser pulse on aluminum A5754/titanium interface with different offsets to the joint line. Plume morphology, dimensions, orientation and propagation velocities were characterized basing on the videos performed with a 810 nm band-pass filter. The main observed feature of the plume was its pronounced initial inclination towards aluminum side, accentuated by the beam offset on aluminum and reduced by the offset on titanium, followed by a progressive redressing resulting in a close-to-vertical jet. This behavior was attributed to the domination of the vapor jet from titanium side over that of aluminum side during the evolution of keyhole curvature. SEM observations of the melt were found in agreement with this statement.

3:00pm - 3:15pm

New strategies for joining of aluminum alloys to steel by means of laser

Daniel Wallerstein1, Antti Salminen2, Fernando Lusquiños1, Rafael Comesaña3, Jesús del Val1, Antonio Riveiro3, Aida Badaoui3, Juan Pou1

1CINTECX, University of Vigo, LaserON Research Group, Vigo, SPAIN; 2Department of Mechanical and Materials Engineering, University of Turku, Turku, FINLAND; 3Materials Engineering, Applied Mechanics and Construction Dpt., University of Vigo, EEI, Vigo, SPAIN

Joining steel and aluminum, is still a challenging task. This is due to significant differences in their fusion, expansion coefficients, thermal conductivity, and the practically zero solubility of Fe in Al. This low solubility leads to formation of intermetallic compounds (IMCs) on the interface between aluminum and steel.

IMCs are necessary to effectively join aluminum and steel, but the intermetallic layer can seriously deteriorate the mechanical properties of the joint.The growth of the IMC layer is the consequence of a diffusion process and, therefore, it is dependent on the welding thermal cycle. In this context, laser welding stands out relative to other welding processes by providing high energy densities and processing, with a moderate heat input.

This paper presents recent developments on the laser joining of aluminum alloys to steel. Succesfull examples of this type of dissimilar welding will be shown, comparing the mechanical performance of the final joint parts.

3:15pm - 3:30pm

Joining dissimliar materials: a new approach based on laser beam welding and melt displacement by electromagnetic forces

Jennifer Heßmann, Marcel Bachmann, Kai Hilgenberg

BAM, Germany

In order to reduce weight of vehicles, the interest in multi-material-design has been growing within the last few years. For vehicles the combination of steel and aluminium alloys offers the most promising compromise between weight, strength and formability. Thermal joining of these dissimilar materials is still a challenge to overcome. A possible approach is a new joining technology, whereby a combination of laser beam welding and contactless induced electromagnetic forces are used to displace the generated melt of one joining partner into a notch of the other. This paper presents the working principle and shows numerical analyses to improve the understanding of this joining process. The simulations help to calculate the thermal development of the joining partners, which is important for the formation of intermetallic phases. Furthermore, the calculation of the time required for a complete displacement is possible. The numerical results are validated by experimental results.

3:30pm - 3:45pm

Temperature measurement for heat conduction laser joining of metals to polymers

Mahdi Amne Elahi, Max Hennico, Peter Plapper

University of Luxembourg, Luxembourg

Laser joining of metals to polymers offers several advantages to produce hybrid assemblies of metals and polymers. One of the most important ones is the exceptional control over the heat input which defines the temperature at the interface of the materials. For the current study, the materials are joined in an overlap configuration with the heat conduction laser joining technique. To enlarge the joining area, beam trajectory was implemented with a continuous-wave fiber laser. The temperature was recorded simultaneously at different areas between the materials with K type thermocouples to identify the behavior of polymer at different temperatures. The results show that due to excessive heat input, polyamide degrades and leaves porosities near the interface of metal/polymer. The optimum condition considering mechanical properties of the welded samples and the absence of the porosities is achievable in a narrow process window between the melting range and the degradation of the polyamide.

3:45pm - 4:00pm

Metallurgy of dissimilar laser beam welded lap joints of supra-ductile and ultra-high strength steels

Martin Dahmen, Berkan Deniz, Dirk Petring

Fraunhofer Institute for Laser Technology, Steinbachstrasse 15, 52014 Aachen, Germany

Results of research on laser beam welding of a high manganese X30MnCrN16-14 (1.4678) to a press hardened X46Cr13 (1.4304), a dual phase steel (1.0944), and a press-hardened manganese boron steel (1.5528) in lap joint configuration will be reported. A pre-assessment of the local mechanical properties by micro hardness measurements revealed their uneven distribution over the weld zone. Based on metallographic inspection the underlying microstructures were revealed. By EDS analyses the local alloy constitutions were determined and assed by of COHMS diagrams. It was confirmed that in the combination with the high manganese steel the formation of ferritic phases, ferrite is largely suppressed to the favour of austenite and α’ and ε martensite. These findings were in part confirmed by nano indentation. The results allow an insight into the properties linked to melt transport, but indicate some further research.

Contact and Legal Notice · Contact Address:
Privacy Statement · Conference: LiM 2021
Conference Software - ConfTool Pro 2.6.142
© 2001–2022 by Dr. H. Weinreich, Hamburg, Germany