Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
 
Session Overview
Date: Sunday, 19/June/2022
8:00am
-
12:00pm
Short Course: Fundamentals of Dielectric Materials and Testing
Location: Wiley Room A1

Presented By: Dr. Nancy Frost

Short Course: Dissolved Gas Analysis (DGA) for in-depth condition assessments. The scientific perspective
Location: Milani Room A2

Presented By: Mr. Lars Arvidsson General Manager VPdiagnose

1:00pm
-
5:00pm
Short Course: Longevity and Reliability of Energy Cable Systems in the Grid
Location: Wiley Room A1

Presented By: Dr. Nigel Hampton Nigel.Hampton@ul.com UL Laboratories

Tutorial: Electrical Insulation Overview
Location: Milani Room A2

Presented By: William Lee, Application Development Engineer – Electrical Tapes & Liquid Resins 3M Electrical Markets Division;
Evanne Wang, Applications Development Engineer, DuPont;
Mark Winkeler, Manager Application Technology, ELANTAS PDG, Inc.;
Solomon Chiang, Director of R&D, The Gund Company

6:00pm
-
8:00pm
Welcome Reception
Location: Ballroom ABD
Date: Monday, 20/June/2022
7:15am
-
8:15am
Breakfast
Location: Ballroom AB
Authors' Breakfast
Location: 300AB
8:30am
-
9:30am
IPMHVC Plenary Lecture - J. Verboncoeur
Location: Ballroom EF
Chair: Nicholas M Jordan, University of Michigan
 
8:30am - 9:30am

From Multipactor to Ionization Breakdown: Review and Recent Advances

J. P. Verboncoeur1, D.-Q. Wen1, A. Iqbal1, Y. Fu2, P. Wong1, P. Zhang1

1: Michigan State University; 2: Tsinghua University

9:30am
-
10:00am
Coffee Break
Location: Ballroom AB
10:00am
-
11:00am
Multipactor
Location: Ballroom C
Chair: Nicholas M Jordan, University of Michigan
 
10:00am - 10:20am

High Power Multipactor Suppression in S-band Waveguide

D. Wright, A. Gregory, H. Spencer, J. Mankowski, J. Stephens, J. Dickens, A. Neuber

Texas Tech University, United States of America



10:20am - 10:40am

Monte Carlo Analysis of Electron Trapping in Nested Cave Structures for Mitigation of Secondary Electron Emission for Potential Multipactor Control in Waveguide

M. Brown, W. Milestone, R. Joshi

Texas Tech University, United States of America



10:40am - 11:00am

Probing Multipactor in X-band Waveguide Components

A. Gregory, D. Wright, H. Spencer, J. Mankowski, J. Stephens, J. Dickens, A. Neuber

Texas Tech University, United States of America

10:00am
-
12:00pm
Power Electronics
Location: 301B
Chair: Katie Sheets, AFRL
 
10:00am - 10:20am

A new topology for DC-DC converter with enhanced current multiplication

O. Zucker, T. Le

Polarix Corporation



10:20am - 10:40am

In-depth Analysis of current-fed resonant Full-bridge Converter Application for high voltage DC Power Supply

R. Grinberg1, A. Reichert2

1: Bern University of Applied Sciences, Switzerland; 2: Industrial X-Ray, Comet AG, Switzerland



10:40am - 11:00am

Study of a Medium Voltage AC/DC Testbed Employing Electrochemical Energy Storage and Power Electronic Regulation

A. N. Wetz1, D. A. Wetz1, J. M. Heinzel2

1: University of Texas at Arlington (UTA), Electrical Engineering Department, 416 Yates Street, Rm. 518, Arlington, TX 76019 USA; 2: Naval Surface Warfare Center – Philadelphia Division, 5001 S Broad St, Philadelphia, PA 19112 USA



11:00am - 11:20am

Analysis of Resonant Behavior of Voltage Multiplier

A. Pokryvailo

Spellman High Voltage Electronics Corp., United States of America



11:20am - 11:40am

Compact Magnetron Power Supply for Industrial Heating Applications

S. Wei, A. J. Watson, M. R. Ahmed, J. C. Clare

University of Nottingham, United Kingdom



11:40am - 12:00pm

Impulse Generator for Simulating Lightning-Induced Pulse Transients for Airborne Equipment Test

S.-M. Park, W.-C. Jeong, H.-J. Ryoo

Chung-Ang University, Korea, Republic of (South Korea)

11:00am
-
12:00pm
Panel Discussion: High Gradient Multipactor and Breakdown
Location: Ballroom C
Chair: John P. Verboncoeur

Panelists: Allen Garner, Purdue University; Nicholas Jordan, UM; Jane Lehr, UNM; Mark Johnston, SNL; Andreas Neuber, TTU

12:00pm
-
1:30pm
Young Engineers Lunch
Location: 300AB
1:30pm
-
3:00pm
Posters: HPM, Repetitive Pulsed Power, Plasmas, Dielectrics, & Analytical Methods
Location: Ballroom D / Henley Concourse
Chair: Matt Lara, Applied Physical Electronics
 

Multipactor Suppression in X-band Waveguide Utilizing Surface Coatings

H. N. Spencer, D. Wright, A. Gregory, J. Stephens, A. Neuber

TTU, United States of America



Development of GaN HEMT based positive and negative, 5 kV, nanosecond pulse generator for the SLS 2.0 fast injection kicker

M. Paraliev

Paul Scherrer Institute, Switzerland



Improvements of a Branch Module for an Inductive Voltage Adder based on Measurements and Circuit Simulations

J. Ruf1,2, M. J. Barnes1, T. Kramer1, M. Sack2

1: CERN, Switzerland; 2: Karlsruhe Institute of Technology, Germany



A Compact GNLTL Using Permanent Magnet Rings With Improved H-field Uniformity

J. O. Rossi1, F. S. Yamasaki1, J. J. Barroso1, A. F. Teixeira1, A. F. Gudes Greco1, E. G. Lopes Rangel1, L. P. Silva Neto2, E. Schamiloglu3

1: INPE; 2: UNIFESP; 3: UNM



Initial Development of an Inductive Adder for High-Energy Beam Kickers

J. R Prager, K. E Miller, K. Muggli, C. Schmidt, S. Wilson, H. Yeager

Eagle Harbor Technologies, Inc., United States of America



A Bipolar Microsecond Pulser for Electroporation and Cancer Therapies

J. R Prager, A. Henson, K. Muggli, H. Yeager, C. Schmidt

Eagle Harbor Technologies, Inc., United States of America



X-band Relativistic Backward Wave Oscillator with Dynamic Frequency Tunability

J.-C. Diot, Y. Delvert, A. Chauloux, J. Pothee, T. Chanconie, N. Ribiere Tharaud

CEA France, France



A High-Power Microwave System for Benchmarking the Microwave Dielectric Strength of Carbon Fluoronitriles

B. R. Bywater, A. T. Hewitt, D. Wright, J. Mankowski, J. Dickens, A. Neuber, J. Stephens

P3E Center, ECE Dept., Texas Tech University, United States of America



Investigating the Dynamic Behavior of Copper Foils Driven by a Megaampere Class Capacitor Bank

A. Young, A. Ferriera, R. Speer, J. Contovasilis, T. Drouillard, J. Trueblood, R. Richardson, C. Beatty

Lawrence Livermore National Laboratory, United States of America



Increasing the Hydrophobicity of Silicone Rubber for Electrical Insulators by Rapid Treatment with Pulsed Gliding Arc Plasma in Air

B. Huang1,2, J. Yu2,3, J. Liu1, Y. Liu1, C. Zhang2,4, T. Shao2,4

1: State Key laboratory of Power Grid Environmental Protection (China Electric Power Research Institute), Wuhan 430074, China; 2: Beijing International S&T Cooperation Base for Plasma Science and Energy Conversion, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China; 3: Key Laboratory of Solar Energy Efficient Utilization and Energy Storage Operation Control in Hubei Province, Hubei University of Technology, Wuhan 430068, China; 4: University of Chinese Academy of Sciences, Beijing 100049, China



Investigation of sawing Response of PBX 9501 and PBX 9502

S. A. Watkins1, J. R. Williams1, R. M. Clark1, J. J. Mankowski1, J. Brinkman2, J. Dickens1, A. A. Neuber1

1: Texas Tech University, United States of America; 2: Consolidated Nuclear Security, Pantex Plant



Experiments on a Scaled Rebar Structure to Quantify Lightning Strike Induced Fields on Rebar Reinforced Concrete Structures

J. W. Slattery1, A. T. Hewitt1, J. Mankowski1, J. Dickens1, A. Neuber1, J. Stephens1, E. Loftin1, D. Friesen2, D. Hattz3, N. Koone3, C. Nelson3

1: P3E Center, ECE Dept., Texas Tech University, Lubbock TX; 2: Mission Engineering Development Group, CNS Pantex, Amarillo, TX; 3: Facility Engineering Electromagnetics Group, CNS Pantex, Amarillo, TX



The characteristic effects of dielectric coatings on electrical exploding film phenomena

J. Zirnheld, B. Onyenucheya

University at Buffalo, United States of America



Energy dissipation and efficiency of exploding film phenomena at varying stack length and thickness

J. Zirnheld, B. Onyenucheya

University at Buffalo, United States of America



Benchmarking the suitability of Novec TM 4710 for application in flux compression generators

N. Fryar, L. Silvestre, J. Stephens, A. Neuber

texas tech, United States of America



Impact Low Pressures on Internal Partial Discharge under DC Voltage

M. Saghafi1, M. Ghassemi1, J. Lehr2

1: Virginia Tech, United States of America; 2: University of New Mexico, United States of America



Study of Partial Discharge Inception Characteristics of Aviation Wire Stressed by PWM Voltages under Various Air Pressures

Z. Wei1, K. Alkhalid1, F. Alsaif1, J. Wang1, D. Schweickart2, D. Grosjean3

1: The Ohio State University, United States of America; 2: Air Force Research Laboratory/RQQE; 3: Innovative Scientific Services, Inc.



Optimal Energy and storage abilities of super capacitors

K. Burke, J. Zirnheld, B. Onyenucheya

University at Buffalo, United States of America



The investigation of dielectric elastomers as non magnetic polymer motor

K. Burke, J. Zirnheld, B. Onyenucheya

University at Buffalo, United States of America



Syntherization and characterization of ceramic capacitor based on BZT for use in nonlinear transmission lines

L. P. da Silva Neto1, R. G. Aredes1, E. Antonelli1, J. O. Rossi2, G. N. Lima2, J. Barroso2, E. G. Rangel2, E. Schamiloglu3

1: Federal University of Sao Paulo, Brazil; 2: National Institute for Space Research; 3: University of New Mexico



Research on Enabling Process Optimization Methods of Metallized Film Capacitor Elements based on Self-healing Frequency Change Characteristics

L. Zheng1, L. Zhu1, J. Liu1, S. Ji1, X. Zhang2

1: State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China; 2: State Grid Jibei Electric Power Co., Ltd. Luanzhou City Power Supply Company



Influence of Charge Traps on Flashover Characteristics of Epoxy Resin in Liquefied Natural Gas under DC Voltage

C. Zhang1,2, C. Ren1,2, T. Shao1,2

1: Beijing International S&T Cooperation Base for Plasma Science and Energy Conversion, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, China; 2: University of Chinese Academy of Sciences, Beijing, China



Density Functional Theory Calculations of Modified Work Functions for Composite Materials

A. M. Darr1, T. N. Tallman2, A. L. Garner1

1: Purdue University, School of Nuclear Engineering, United States of America; 2: Purdue University, School of Aeronautics and Astronautics, United States of America



Protection Assessment of Lightning Strikes on Concrete-Steel Structures simulated at full-scale

A. T. Hewitt1, J. W. Slattery1, J. Mankowski1, J. Dickens1, A. Neuber1, D. Friesen2, D. Hattz3, N. Koone3, C. Nelson3, J. Stephens1

1: P3E Center, ECE Dept., Texas Tech University, Lubbock, TX; 2: Mission Engineering Development Group, CNS Pantex, Amarillo, TX; 3: Facility Engineering Electromagnetics Group, CNS Pantex, Amarillo, TX



Multipactor saturation variances due to changes in the SEY curve*

L. Silvestre, J. Stephens, J. Dickens, J. Mankowski, A. Neuber, R. Joshi

Texas Tech University, United States of America



Variation of the Hull Cutoff Magnetic Field with External Resistance and Collisions

A. M. Komrska1, A. M. Darr1, H. Yu1, L. I. Breen1, A. M. Loveless1, K. L. Cartwright2, A. L. Garner1

1: Purdue University, West Lafayette, IN 47906 USA; 2: Sandia National Laboratories, Albuquerque, NM



The Pulsed Magnetic Field Diffusion into Moving Metal Body with Pre-Created Gradient of Electrical Conductivity (Numerical Analysis in 2D Model of FlexPDE-6 software)

V. T. Chemerys1, I. O. Borodiy2

1: V.I. Vernadsky National Taurida University of Ukraine in Kyiv, Ukraine; 2: National Aviation University of Ukraine, Kyiv, Ukraine



The physical model of explosive ion emission

S. Korenev

Kore-Science, LLC, United States of America



Wavelet Based Feature Extraction From High Voltage Impulse Signal

E. Onal1, T. C. Akinci2, A. M. Morales2

1: Istanbul Technical University, Turkey; 2: University of California, Riverside, California USA

3:00pm
-
3:30pm
Coffee Break
Location: Ballroom AB
3:30pm
-
5:30pm
Dielectrics I
Location: Ballroom C
Chair: Jennifer Zirnheld, University at Buffalo
 
3:30pm - 3:50pm

Effect of Humidity on Electrical Characteristics of an Arc in Air at Normal Flight Altitudes

D. Grosjean1, D. Schweickart2

1: Innovative Scientific Solutions, Inc., United States of America; 2: Air Force Research Laboratory/RQQE, United States of America



3:50pm - 4:10pm

Simulation and Analysis of Initial Stages of Negative Discharges in Air for Needle-Plane Electrode Configuration

M. Hamidieh, M. Ghassemi

Virginia Tech, United States of America



4:10pm - 4:30pm

Study of anode-initiated surface flashover in vacuum with spatiotemporally resolved optical emission spectroscopy

R. M. Clark1, M. P. Mounho1, W. C. Brooks1, M. M. Hopkins2, J. J. Mankowski1, J. C. Dickens1, J. C. Stephens1, A. A. Neuber1

1: Texas Tech University, Lubbock, TX, United States of America; 2: Sandia National Laboratories, Albuquerque, NM, United States of America



4:30pm - 4:50pm

Electrical diagnostics and nanosecond imaging of vacuum surface flashover

M. Mounho1, J. Young1, R. Clark1, W. Brooks1, M. Hopkins2, A. Neuber1, J. Stephens1

1: Texas Tech University, Lubbock, TX; 2: Sandia National Laboratories, Albuquerque, NM



4:50pm - 5:10pm

Utilization of Additive Manufacturing to Improve the Voltage Distribution Across Inductor’s Turns

F. K. Alsaif, Y. Zhang, R. Borjas, K. Alkhalid, J. Wang

The Ohio State University, United States of America



5:10pm - 5:30pm

Breakdown performance of industry grade Kapton under PWM waveforms

A. Y. Mirza, A. Konstantinou, H. Nguyen, A. Bazzi, Y. Cao

University of Connecticut, Storrs, CT, USA

Date: Tuesday, 21/June/2022
7:15am
-
8:15am
Breakfast
Location: Ballroom AB
Authors' Breakfast
Location: 300AB
8:00am
-
8:30am
IPMHVC Magna Stangenese Memorial
Location: Ballroom EF
9:30am
-
10:00am
Coffee Break
Location: Ballroom AB
10:00am
-
12:00pm
Plasmas, Discharges, and Electromagnetic Phenomena
Location: Ballroom C
Chair: Mona Ghassemi, Virginia Tech
 
10:00am - 10:20am

Computational study of plasma flow in arcing horns during a voltage surge

R. Ranjan1, A. Karpatne1, N. Raj1, S. Thiruppathiraj1, D. Breden1, L. Raja2

1: Esgee Technologies Inc., United States of America; 2: The University of Texas at Austin



10:20am - 10:40am

Numerical simulation of arcing during contact separation in SF6-filled high voltage circuit breaker

R. Ranjan1, N. Raj1, S. Thiruppathiraj1, A. Karpatne1, D. Breden1, L. Raja2

1: Esgee Technologies Inc., United States of America; 2: The University of Texas at Austin



10:40am - 11:00am

--Withdrawn--

B. Feng, C. Zhang, T. Shao

Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, China, China, People's Republic of



11:00am - 11:20am

Pulsed Spark Plasma Cracking Heavy Oil for Hydrogen and Acetylene Production

Z. Fan1,2, H. Sun1, C. Zhang1,2, T. Shao1,2

1: Beijing International S&T Cooperation Base for Plasma Science and Energy Conversion, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China; 2: University of Chinese Academy of Sciences, Beijing 100049, China



11:20am - 11:40am

--Withdrawn--

T. Sugai1, A. Tokuchi2, W. Jiang1

1: Nagaoka University of Technology, Japan; 2: Pulsed Power Japan Laboratory Ltd.



11:40am - 12:00pm

Underwater Electric Discharges: Experiment and Modeling

T. Frost1, B. M. Novac1, P. Senior1, L. Pecastaing2, T. Reess2

1: Loughborough University, United Kingdom; 2: University of Pau, France

Solid State Modulators
Location: 301B
Chair: James Randall Cooper, Cooper Consulting Services, Inc.
 
10:00am - 10:20am

Design and Analysis of a 24 kV PCB-Bus for the Low Impedance Interconnect of a Multiphase PEBB-based Converter

J. Stewart

Virginia Tech - Center for Power Electronics Systems, United States of America



10:20am - 10:40am

A 30-kV Solid-State Impedance-Matched Marx Generator: Practical Considerations on Impedance Matching

T. Huiskamp, J. van Oorschot, M. Azizi

Eindhoven University of Technology, The Netherlands



10:40am - 11:20am

The Stacked Multi-Level Klystron Modulators for the ESS Linac

C. Martins1, M. Collins2, M. Kalafatic1, L. Yury1

1: European Spallation Source ERIC; 2: Lund University Faculty of Engineering - LTH, IEA Division



11:20am - 11:40am

Evaluation of Klystron Modulator Performance in Interleaved Pulsing Schemes for the ESS Neutrino Super Beam Project

M. Collins1,2, C. Martins1,2, M. Eshraqi2, B. Gålnander2

1: Lund University; 2: European Spallation Source ERIC



11:40am - 12:00pm

Analysis of the Triggering Instants of the Solid-State Switches of the Pulsed Power Sources for Achieving Optimal Projectile Velocity in a Multistage Induction Coilgun

R. Ram, J. T. Meledath

Indian Institute of Science, Bangalore, India

12:00pm
-
1:30pm
Diversity & Inclusion Lunch
Location: Ballroom AB
1:30pm
-
3:00pm
Posters: Solid State, Power Electronics, High Voltage, Biomedical
Location: Ballroom D / Henley Concourse
Chair: Xiu Yao, University at Buffalo
 

Design and Implementation of the SML Modulators for the ESS Linac

M. Collins1,2, C. Martins1,2

1: Lund University, Sweden; 2: European Spallation Source ERIC



Triggered Spark Gap Evaluation and Optimization for Low Jitter, High Reliability Applications

J. L. Contovasilis, A. J. Young, A. M. Pearson, R. D. Speer

Lawrence Livermore National Laboratory, United States of America



Pulsed Power Supply for Magnet Quench Training

M. T Davidson, C. C Jensen, M. R Kufer, H. Pfeffer, S. Stoynev

Fermi National Accelerator Laboratory



A 300 kA Pulsed Power Supply for LBNF

C. C Jensen1, J. Hugyik2, B. Morris2, T. Omark1, H. Pfeffer1, K. Roon1

1: Fermi National Accelerator Laboratory; 2: SLAC National Laboratory



High-Speed Imaging of Exploding Detonators

H. J. Gaus1, J. J Mankowski2, A. Neuber2, D. H. Barnett3

1: Los Alamos National Laboratory, United States of America; 2: Texas Tech University; 3: Scientific Applications & Research Associates



The next step progress for a skin effect opening switch construction ( the resistive version)

E. Oleg

free, Russian Federation



SLAC LINAC Sub-booster Modulator Upgrade with Solid State Switch

X. Chen, J. de Lamare

SLAC National Accelerator Lab, United States of America



X-Band TWT Transmitter

M. Kempkes, R. Simpson, M. Gaudreau, L. Jashari, J. Kinross-Wright, B. Lindsay, K. Vaughan, T. Hawkey

Diversified Technologies, Inc., United States of America



High Stability Klystron Modulator for Commercial Accelerator Application

M. Kempkes, C. Chipman, A. Heindel, M. Benjnane, H. von Kelsch, Z. Ruan, M. Gaudreau, R. Simpson

Diversified Technologies, Inc., United States of America



Aluminum electrolytic capacitor vulnerability evaluation in DC power supplies at the Spallation Neutron Source

S. T. Harave

Oak Ridge National Laboratory, United States of America



Duty Cycle Adjustable High-Voltage AC Power Supply with High Repetition Rate

Y. Feng1, Y. Gao1, C. Zhang1,2, T. Shao1,2

1: INSTITUTE OF ELECTRICAL ENGINEERING,CHINESE ACADEMY OF SCIENCES, China, People's Republic of; 2: University of Chinese Academy of Sciences



A high-power pulse resistor with nonlinear low inductance

Z. Duan1, G. Sun1,2, X. Si2, Y. Huang2

1: Hefei University of Technology, China, People's Republic of; 2: Hefei Hangtai Electrophysics Co. Ltd



A low cost, fast rise time, 120 kV multiple use Pulsed Power trigger generator

M. Woodyard, B. Novac, P. Senior

Loughborough University, United Kingdom



An Experimental Apparatus for Novec 4710 for Pulsed Power Applications

J. A. Matthies1, L. Silvestre1, J. Stephens1, J. Dickens1, J. Mankowski1, A. Young2, A. Neuber1

1: Texas Tech University, United States of America; 2: Lawrence Livermore National Laboratory



Development of a Magnetron based S-band High Power Microwave Test Bed

G. Gomez, J. Mankowski, J. Dickens, A. Neuber, J. Stephens

Texas Tech University Center for Pulsed Power and Power Electronics



Design Challenges in High Current Pulsed Striplines

H. Pfeffer, M. Davidson, N. Curfman, T. Omark

Fermilab, United States of America



The Recent Improvements of the SNS Extraction Kicker Power Supplies

Y. Tan, R. Saethre

Oak Ridge National Laboratory, United States of America



Los Alamos National Laboratory Fast Kicker Upgrade 2022

H. J. Gaus III, L. Merrill, R. McCrady, J. T. Bradley III, J. B. Sandoval, W. T. Roybal, G. V. Cordero-Rivera

Los Alamos National Laboratory, United States of America



Fast Measurements with Modified HVD Series of High Voltage Dividers

A. Pokryvailo

Spellman High Voltage Electronics Corp., United States of America



A Multi-Hundred kW HV Power Supply Platform with Low Stored Energy for Industrial Applications

I. Erakovic, D. Green, A. Pokryvailo

Spellman High Voltage Electronics Corp., United States of America



Electric Field Driven Ionization Waves in Nanosecond-pulse Discharge

C. Zhang1,2, H. Bangdou1, T. Shao1,2

1: Institute of Electrical Engineering, Chinese Academy of Sciences, China, People's Republic of; 2: University of Chinese Academy of Sciences



Calculations of pulsed magnetic Field Interactions with Neurons using Sim4Life

E. F. Downing1, R. R. Ramos1, A. M. Loveless1, H. A. Ryan2, K. M. Virgilio3, A. L. Garner1

1: Purdue University, United States of America; 2: Veritas Alchemy LLC; 3: Luna Innovations



Modeling Plasma Membrane Pore Dynamics During Exposure to Electric Pulses Delivered by a Mismatched Blumlein Transmission Line

S. J. Wyss1, A. M. Loveless1, W. Milestone2, R. P. Joshi2, A. L. Garner1

1: Purdue University, United States of America; 2: Texas Tech University, United States of America

3:00pm
-
3:30pm
Coffee Break
Location: Ballroom AB
3:30pm
-
5:30pm
Dielectrics II
Location: Ballroom C
Chair: Kevin Burke, University at Buffalo
 
3:30pm - 3:50pm

Electrostatic Surface Charge Decay of Floating Dielectrics

Z. Cardenas1, B. Esser1, I. Aponte1, M. LaPointe1, J. Dickens1, J. Mankowski1, J. Stephens1, D. Friesen2, D. Hattz2, N. Koone2, C. Nelson2, A. Neuber1

1: Texas Tech University, United States of America; 2: Pantex, Amarillo Tx. United States of America



3:50pm - 4:10pm

Characterization and Modeling of electrostatic Discharges on floating dielectric Materials

B. Esser1, I. A. Aponte1, J. C. Stephens1, J. C. Dickens1, J. J. Mankowski1, D. Friesen2, D. Hattz3, N. Koone3, C. Nelson3, A. A. Neuber1

1: P3E Center, Texas Tech University; 2: Mission Engineering Development Group, CNS Pantex; 3: Facility Engineering Electromagnetics Group, CNS Pantex



4:10pm - 4:30pm

A Finite Element Analysis Model for Internal Partial Discharges under DC Voltages

M. Saghafi1, M. Ghassemi1, J. Lehr2, M. Borghei3, B. Kordi4, D. Oliver4

1: Virginia Tech, United States of America; 2: University of New Mexico, United States of America; 3: Avalanche Energy Designs, United States of America; 4: University of Manitoba, Canada



4:30pm - 4:50pm

--Withdrawn--

A. F. Leite Neto, E. G. Costa, P. B. Vilar, I. B. Oliveira, J. V. J. Melo

Federal University of Campina Grande, Brazil



4:50pm - 5:10pm

Effect of Titania Nanofiller on Electrical Tree of Silicone Gel

K. Nishikawa1, M. Kurimoto1, T. Kawashima2, H. Muto1

1: Nagoya University, Japan; 2: Toyohashi University of Technology

High Power Microwaves
Location: 301B
Chair: Jon Cameron Pouncey, Naval Surface Warfare Center Dahlgren Division
 
3:30pm - 4:10pm

High Power Microwave and Pulsed Power Development at the University of Michigan

N. M. Jordan, D. A. Packard, B. J. Sporer, A. P. Shah, G. V. Dowhan, S. C. Exelby, P. C. Campbell, T. J. Smith, C. J. Swenson, R. A. Revolinsky, E. N. Guerin, L. I. Welch, S. V. Langellotti, Y. Lau, R. D. McBride, R. M. Gilgenbach

University of Michigan, United States of America



4:10pm - 4:30pm

Modeling Composite Nonlinear Transmission Lines as High-power Microwave Sources

X. Zhu, A. J. Fairbanks, T. D. Crawford, A. L. Garner

Purdue University, United States of America



4:30pm - 4:50pm

System Design Considerations for a Nonlinear Transmission Line Used Simultaneously as a Pulse Forming Line and High-Power Microwave Source

T. D Crawford, X. Zhu, A. J Fairbanks, A. L Garner

Purdue University, United States of America



4:50pm - 5:10pm

RF Output Power Detection of the RADAN MG-4 Microwave Generator

N. C. Harrison, K. Allen, J. C. Dickens, A. A. Neuber, J. Mankowski

Texas Tech University, United States of America



5:10pm - 5:30pm

Compact 60kV High Voltage Capacitor Charger for UWB Electromagnetic Pulse Generator

W. C. Jeong, H. J. Ryoo

Chung-Ang University, Korea, Republic of (South Korea)

6:30pm
-
7:30pm
Conference Banquet Reception
Location: Exhibition Hall
7:30pm
-
9:00pm
Conference Banquet
Location: Ballroom ABC
Date: Wednesday, 22/June/2022
7:15am
-
8:15am
Breakfast
Location: Ballroom AB
Authors' Breakfast
Location: 300AB
9:30am
-
10:00am
Coffee Break
Location: Ballroom AB
10:00am
-
12:00pm
Repetitive Pulsed Power
Location: Ballroom C
Chair: Jacob Stephens, Texas Tech University
 
10:00am - 10:20am

Spark Gap with integrated triggering Laser

J. C. Pouncey

Naval Surface Warfare Center Dahlgren Division, United States of America



10:20am - 10:40am

COBRA DANE Radar Transmitter Group Replacement

M. Kempkes, T. Hawkey, L. Jashari, K. Vaughan, Y. Francis, M. Gaudreau, R. Simpson

Diversified Technologies, Inc., United States of America



10:40am - 11:00am

Microscale Gas Breakdown for Microwave Fields: Theory and Simulation

S. Mahajan1, A. M. Loveless1, A. Semnani2, A. Venkattraman3, A. L. Garner1

1: Purdue University, West Lafayette, IN 47906 USA; 2: The University of Toledo, Toledo, OH 43606 USA; 3: University of California, Merced, Merced, CA 95343 USA



11:00am - 11:20am

Synthesis of Pulsed Forming Systems for Electromagnetic Manufacturing Process

D. Kaushik, J. T. Meledath

Indian Institute of Science Bangalore, India



11:20am - 11:40am

Acoustic energy from exploding wire generated chemical reaction

T. Frost, B. M. Novac, P. Senior

Loughborough University, United Kingdom



11:40am - 12:00pm

Explosive Pulsed Power: Milling operation limits of PBX 9501 and PBX 9502

E. Weeks1, J. Williams1, R. Clark1, S. Watkins1, R. Albin1, J. Dickens1, J. Mankowski1, J. Brikman2, A. Neuber1

1: Texas Tech University, Lubbock, TX; 2: CNS Pantex, FM2373 and HWY 60

Biomedical and Applications
Location: 301B
Chair: Ram Anand Vadlamani, Virginia Tech
 
10:00am - 10:20am

Pulsed Electric Field Activation of Platelet Rich Plasmas with Different Levels of Platelet Enrichment and Red Blood Cell Content

B. Neculaes1, A. Garner2, E. Longman2

1: GE Research, Niskayuna, NY, United States of America; 2: Purdue University, West Lafayette, IN, United States of America



10:20am - 10:40am

Analysis of the Role of Cellular Heating in Microsecond Irreversible Electroporation

W. J. Milestone1, Q. Hu2, A. M. Loveless3, A. L. Garner3, R. P. Joshi1

1: Texas Tech University, Lubbock, TX 79409, USA; 2: Eastern Michigan University, Ypsilanti, MI 48197, USA; 3: Purdue University, West Lafayette, IN 47906, USA.



10:40am - 11:20am

Enhanced inactivation of Gram-negative bacteria using Gram-positive antibiotics and nanosecond electric pulses

R. A. Vadlamani1, A. Dhanabal2, D. A Detwiler3, R. Pal1,2, J. McCarthy3, M. N Seleem1,2, A. L Garner2

1: Virginia Tech; 2: Purdue University; 3: Nanovis



11:20am - 11:40am

Using intense pulsed electric fields for the sterilization of solid pre-packed food – the design and preliminary testing of a practical MV-class system

M. Woodyard, B. Novac, P. Senior, J. Stobbs

Loughborough University, United Kingdom



11:40am - 12:00pm

Resonant Charging Circuit for a Semiconductor-based Marx Generator for an Electropoation Device

M. Sack, D. Herzog, J. Ruf, G. Mueller

Karlsruhe Institute of Technology, Germany

12:00pm
-
1:30pm
Lunch (on your own)
1:30pm
-
3:00pm
IPMHVC Plenary Lecture - R. Joshi
Location: Ballroom EF
Chair: Allen Garner, Purdue University
 
1:30pm - 2:30pm

Modeling electric-field driven nonequilibrium phenomena for applications to pulsed power, electron beam generation, transport in materials, and electromanipulation for biomedicine

R. P. Joshi, M. Brown, W. Milestone, M. Sanati, J. Mankowski, J. Dickens, A. Neuber

Texas Tech University, United States of America

3:00pm
-
3:30pm
Coffee Break
Location: Ballroom AB
3:30pm
-
5:30pm
High Voltage
Location: Ballroom C
Chair: Howard Sanders, Sanders Pulsed Power LLC
 
3:30pm - 3:50pm

Influence of Low Pressure on Thermal Limit of MVDC Power Cables Used in All Electric Aircraft

A. Azizi1, M. Ghassemi1, J. Lehr2

1: Virginia Tech, United States of America; 2: University of New Mexico, United States of America



3:50pm - 4:10pm

An innovative approach to the design of medium voltage power electronics printed circuit-boards

Q. Yang, C. Diendorfer, D. Nath, M. Steurer, G. C. Montanari

Center for Advanced Power Systems, Florida State University, United States of America



4:10pm - 4:30pm

Breakdown Characteristics of Printed Circuit Board Based Transformer Windings

R. E. P. Frost1, P. L. Lewin2

1: QinetiQ, United Kingdom; 2: University of Southampton, United Kingdom



4:30pm - 4:50pm

Reliable, Low-Jitter 100-kV Trigger Generator

R. E. Beverly III

R. E. Beverly III and Associates, United States of America



4:50pm - 5:10pm

Custom electrostatic probe diagnostics

M. LaPointe1, B. Esser1, I. Aponte1, Z. Cardenas1, J. Dickens1, J. Mankowski1, J. Stephens1, D. Friesen2, N. Koone2, D. Hattz2, C. Nelson2, A. Neuber1

1: Texas Tech University, United States of America; 2: Pantex, Amarillo Tx. United States of America



5:10pm - 5:30pm

Improved Manufacturing Process for High Voltage Pulsed Diodes

A. Usenko1, A. Caruso1, S. Bellinger2

1: University of Missouri-Kansas City, United States of America; 2: Semiconductor Power Technologies, Manhattan, KS, USA

Analytical Methods
Location: 301B
Chair: Amanda M. Loveless, Purdue University
 
3:30pm - 3:50pm

Comparison of Particle-in-Cell and Continuum Simulations for RF Microscale Gas Breakdown

A. M. Loveless1, V. Ayyaswamy2, S. Mahajan1, A. Semnani3, A. L. Garner1

1: Purdue University, United States of America; 2: University of California Merced, United States of America; 3: University of Toledo, United States of America



3:50pm - 4:30pm

Crossed-Field Nexus Theory: Incorporating Collisions, Field Emission, Thermionic Emission, and Space-Charge

L. I. Breen1, A. M. Loveless1, A. M. Darr1, K. L. Cartwright2, A. L. Garner1

1: Purdue University, West Lafayette, IN 47906 USA; 2: Sandia National Laboratories, Albuquerque, NM



4:30pm - 4:50pm

Novel techniques for deriving the space-charge limited current for nonplanar diodes

N. R. Sree Harsha, A. M. Darr, J. M. Halpern, A. L. Garner

Purdue University, United States of America



4:50pm - 5:10pm

Assessment of Techniques for Determining Space-Charge Limited Current for Non-planar Crossed-field Diodes

H. Wang, N. R. Sree Harsha, A. M. Darr, A. L. Garner

Purdue University



5:10pm - 5:30pm

Optimization of a Set of Electron-Neutral Collision Cross Sections in Fluorinated Nitrile (C4F7N)

M. Flynn, A. Neuber, J. Stephens

Texas Tech University, United States of America

Date: Thursday, 23/June/2022
8:00am
-
12:00pm
Short Course: Circuit and Field Simulations in High Voltage Power Supply (HVPS) Practice
Location: Royston Room B3

Presented By: Dr. Alex Pokryvailo

Short Course: Unification of electron emission and breakdown mechanisms: Experiments and theory
Location: Clark Room B4

Presented By: Prof. Allen Garner

1:00pm
-
2:00pm
Sandia Pulsed Power Town Hall
Location: Armstrong Room B2

 
Contact and Legal Notice · Contact Address:
Privacy Statement · Conference: IEEE IPMHVC 2022
Conference Software - ConfTool Pro 2.6.144
© 2001–2022 by Dr. H. Weinreich, Hamburg, Germany