Conference Agenda
Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).
|
Daily Overview | |
| Location: Augustus 6 |
| 1:30pm - 3:00pm |
Poster Session - Monday Location: Augustus 6 Chair: Dr. Ali Al-Abadi, HITACHI Energy Germany, Germany Chair: Thomas Klamt, GE Vernova, Switzerland Development and Testing of a PD Measurement System for Inverter Operation University of Applied Sciene Hannover, Germany Advanced Diagnostic Technique to Detect Abnormal Sound Source in MV Metal-clad Switchgears SAUDI ARAMCO, Saudi Arabia Classification of Sporadic Partial Discharge Pulses Based on Beq-Deq Analysis Method School of Electrical Engineering Shanghai Jiao Tong University, China, People's Republic of Research on the Evolution Mechanism of Surface Flashover Performance in SF6 under Long-Term AC Voltage Shanghai Jiao Tong University, China, People's Republic of Analysis of Current Imbalance in MOSA Banks Under DC Short Circuit Current Tests Dept, of Electronic Engineering, HVDC Electric Power Lab Development of Mica Insulation Tape with Nano Filler for Global VPI Stator Windings TMEIC Corporation, Japan Numerical and Experimental Investigation of Winding Temperature of 72.5 kV Dry-type Transformer Hitachi Energy (China) Ltd., China, People's Republic of Properties of Nb-doped BCZT ceramics for nonlinear transmission line applications: synthesis and characterization 1: Unifesp, Brazil; 2: INPE, Brazil; 3: UNM, USA Influence of Partial Discharge Location on Stator Winding PD Current Waveforms and Propagation Characteristics: Measurement and Simulation 1: Kyushu Institute of Technology, Japan; 2: TMEIC Corporation, Japan Influence of TiO2 on Dielectric Cellulose for High-Efficiency Power Transformers 1: Unifesp, Brazil; 2: FEMA Indústria de Materiais Isolantes Ltda, Brazil; 3: INPE, Brazil Conduction-Charged Parylene HT Electrets for Partial Discharge Suppression in Power Modules 1: Arizona State University, Tempe, AZ, United States of America; 2: University of Arkansas, Fayetteville, AR, United States of America Resin Penetration and Moisture Absorption Behaviors of Cellulose Nano-Fiber Boards for Rotating Machine Electrical Insulation 1: TMEIC Corporation, Japan; 2: Mitsubishi Electric Corporation, Japan; 3: Nagoya University, Japan; 4: RISHO KOGYO CO., LTD., Japan Experimental and Numerical Investigation of Surface Charge Accumulation Behavior under DC Pre-Stress in SF₆ Gas-Electrode Configuration 1: hanyang university, Korea, Republic of (South Korea); 2: Power & Industrial Systems R&D Center, HYOSUNG Corporation, Korea, Republic of (South Korea) Investigation on Internal Conductor Spacings in Printed Circuit Boards for Power Converters The University of Manchester, United Kingdom Experience in Partial Discharge Detection for Rotating Machines Using Charge Integration Mode (CIM), Three-Phase Signal Discrimination (TPSD), and Peak Phase Dispersion Analysis (PPDA) O&M Korea, Korea, Republic of (South Korea) POWERGRID’s Experience with Transformer Insulation Failures: Root Cause Analysis and Preventive Measures POWERGRID, India Partial Discharge Development Characteristics of Void Defect inside a 500 kV GIL Tri-post Insulator Under Long-term Electric Stress 1: Ningnan Baihetan Hydropower Plant, Three Gorges Jinsha River Yunchuan Hydropower Development Co., Ltd.ublic of; 2: Sichuan Energy Internet Research Institute, Tsinghua University, China, People's Re Investigation of Bulk Self-Healing behaviour in Natural Rubber/Polycaprolactone and Polyethylene Oxide Blends 1: University of Genova, Italy; 2: Instituto de Ciencia y Tecnología de Polímeros (CSIC), Spain Surface Partial Discharge: Self-Healing Properties of Natural Rubber/Thermoplastic blend Under Electrical Stress 1: University of Genova, Italy; 2: Instituto de Ciencia y Tecnología de Polímeros (CSIC), Spain Improved Classification of Partial Discharge in Rotating Machines via Feature Extraction, Selection and Integrated Random Forest 1: UDERZA Unit, Faculty of Technology, University of El Oued, Algeria; 2: LGMM Laboratory, Faculty of Technology, University of 20 August 1955-Skikda, Skikda, Algeria; 3: Department of Electrical Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia; 4: Department of Electrical Automation Engineering, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia; 5: Laboratory of Research on Electromechanical and Dependability, University of Souk Ahras, Algeria; 6: Université de Pau et des Pays de l’Adour, E2S UPPA, Pau, France; 7: Department of Electrical Power and Machines Engineering, Faculty of Engineering, Tanta University, Tanta 31511, Egypt; 8: Department of Electrical Power Engineering, Faculty of Engineering, Egypt-Japan University of Science and Technology (E-JUST), Alexandria 21934, Egypt Thermal class evaluation of coating materials via standardized test methods 1: Astro Chemical Company, Inc., United States of America; 2: Frosty's Zap Lab, LLC, United States of America Defect Detection in Power Transformers Using Multiconductor Transmission Line-Based Model of Winding 1: University of Manitoba, Canada; 2: PTI Transformers LP, Canada; 3: Electric Power Engineers, USA Three-dimensional approach to the transfer function in transformer windings and its application to the Interpretation of SFRA results 1: ESIME Instituto Politecnico Nacional, Mexico; 2: Facultad de Estudios Superiores Aragón, Universidad Nacional Autónoma de México Calculation of the Leakage Impedance of a Reconnectable Three-Phase Mobile Power Transformer Using the Finite Element Method 1: ESIME Instituto Politecnico Nacional, Mexico; 2: Facultad de Estudios Superiores Aragón, Universidad Nacional Autónoma de México Effect of Molecular Weight on Partial Discharge-Induced Degradation of Alkoxysilane-Terminated PDMS Films 1: Mie University; 2: TMEIC Investigating the Effect of Digestive Liquid on the Microstructure and Current Nonlinearity of Cold Sintered ZnO 1: School of Material Science and Engineering Georgia Institute of Technology Atlanta, U.S; 2: School of Electrical and Computer Engineering Georgia Institute of Technology Atlanta, U.S.; 3: School of Mechanical Engineering Georgia Institute of Technology Atlanta, U.S. Experimental Validation of a High-Frequency Equivalent Circuit Model for Partial Discharge Localization Using an Unmolded Voltage Transformer 1: Kyusyu Institute of Technology, Japan; 2: Mie University; 3: Toshiba Industrial Products and Systems Co, Ltd. Integrated Diagnostic Assessment of Insulation Degradation in Medium-Voltage Switchgear and Cable Systems NA, United States of America Elaboration of suitable sensors to PDs within different motor insulation configurations at ultra short rise times Chalmers University of Technology, Sweden |
| 1:30pm - 3:00pm |
Poster Session - Tuesday Location: Augustus 6 Chair: megha bhardwaj, NA, United States of America Chair: Dr. Waldemar Ziomek, PTI Transformers LP, Canada The Effect of the Energization Scheme on Composite Insulator Interface with Defect under DC 1: Universidad Tecnica Federico Santa Maria, Chile; 2: Ricerca Sul Sistema Energetico - RSE, Italy Partial Discharge Source Identification under Switching Voltage using a Novel Amplitude-Width-Area (AWA) based Visualization and CNN Classification The University of Akron, United States of America Terahertz-based Signal Chain for Space Charge Detection in Polymeric Insulation 1: Department of Electrical Engineering, Tsinghua University, Beijing, China; 2: School of Electrical Engineering, Xinjiang University, Urumqi, China The Detection of Protrusions in Air, CO2, and CO2/N2 using Partial Discharge Measurements ETH Zürich, Switzerland Phase Independent Classification of Insulation Degradation for High Voltage Motors based on Partial Discharge Signals 1: Mitsubishi Electric Corporation, Japan; 2: TMEIC Corporation, Japan Lifespan Prediction of Varnish-Impregnated Corona Armor Tape in Form-Wound Stator Coils 1: Mitsubishi Electric Corporation, Japan; 2: TMEIC Corporation, Japan The Prediction Model of Winding Temperature Distribution for the Dry-type Transformer Hitachi Energy (China)Ltd Modeling and Property Study of A New Mixed Natural Ester Insulation Oil : Based on Molecular Dynamics and First Principles 1: Chongqing Electric Power College, Chongqing, People's Republic of China; 2: State Grid Chongqing Electric Power Company Tongnan Power Supply Branch Glass Backed Epoxy Resin-Rich Mica Tape with High Thermal Conductivity 1: Nippon Rika Technologies Inc., Japan; 2: Nippon Rika Industries Corporation, Branch Office Austria, Austria; 3: Nippon Rika Inc., USA Analysis of Data Processing Methods for Separation of Partial Discharge Pulses Megger Aachen PD, Germany Methodological Proposal for Interpreting Dielectric Oil Test Results in Power Transformers 1: Universidad del Valle, Colombia; 2: Transformadores de Colombia, Colombia Avatar-Based Immersive Training for High-Voltage Safety Transilvania University of Brasov, Romania Analysis of Induced Voltages and Currents Profiles in Power Cable Metallic Sheaths: Assessing the Effect of Ideal and Non-Ideal Transpositions 1: ESIME Instituto Politecnico Nacional, Mexico; 2: Tecnológico de Monterrey Campus Ciudad de México; 3: Comisión Federal de Electricidad, Ciudad de México; 4: Distribuciones Cantilever Impact of Resolution and Measurement Time on PRPD Generation and Analysis Megger, United States of America Investigation of erosion of switchgear contacts in supercritical carbon dioxide Georgia Institute of Technology, United States of America Experimental and Computational Study of PDIV and Ageing in Electrical Insulation Under Multi-Stress Conditions 1: Tecnun, Spain; 2: Ceit, Spain Topics: new materials and nanodielectrics in OC &A 1: Electric Power Research Institute State Grid Jiangxi Electric Power Nanchang, China; 2: State Grid Jiangxi Electric Power Co., Ltd. Nanchang, China; 3: China Electric Power Research Institute Beijing, China Analysis on the Dielectric Breakdown Characteristics of BAS-Based Glass Insulators Operated in Cryogenic Conditions Department of Electrical Engineering, Hanyang University, Korea, Republic of (South Korea) Online Monitoring and Diagnostic Analysis of Partial Discharge in Thermally Stressed Enameled Wires University of Genova, Italy Partial Discharge Signal Clustering for Insulation Degradation Monitoring University of Genova, Italy Non-contact Partial Discharge Localization in Aged Epoxy-Molded Busbars Using Multi-Loop Magnetic Sensors 1: Kyushu Institute of Technology, Japan; 2: TEPCO Power Grid, Incorporated Solid Insulation Breakdown Voltages under Bipolar Aperiodic Decaying Pulses: Comparison to Breakdown at Unipolar Pulses Spellman High Voltage Electronics Corp., United States of America Mapping Electric Fields in Insulation System of a High Voltage Planar Converter Transformer 1: Chalmers University of Technology, Sweden; 2: KraftPowercon Sweden AB, Sweden Graph-Based Unsupervised Representation Learning for Partial Discharge Waveform Clustering 1: University of Manitoba; 2: PSC Consulting; 3: Manitoba Hydro; 4: RMS Energy; 5: Camelin Energy Classification of used oil transformer by artificial intelligence University of sciences and technology HOUARI BOUMEDIENE USTHB, Algeria Taping technology and the impacts on voltage endurance testing Electrolock, United States of America Insulator Materials for Electric Vehicles: Trends and Future Transilvania University of Brasov, Romania Energy Pathways & Dielectric Decomposition in Mineral-Oil Field Transformers 1: Megger, United States of America; 2: Megger, United States of America; 3: Megger, United States of America; 4: Megger, United States of America Enhancement of Impulse Partial Discharge Inception Voltage in Laminated Polyimide Films Using Boehmite Nanocomposite Layers 1: Kyushu Institute of Technology, Japan; 2: Sumitomo Seika Chemicals Co., Ltd, Japan Optimizing Corona Electrode Geometry: A Comparative Electric Field Analysis Indian Institute of Technology (IIT) Kanpur, India |