Conference Agenda

Turbulent-laminar patterns

L. Tuckerman

Nonlocal interaction problems with anisotropy

M. G. Mora

Recent results in the mathematical analysis of Hibler's sea ice model

F. Brandt

Advancements in sea ice dynamics modeling based on a mixed least-squares Finite Element study with non-conforming stress approximation

S. Hellebrand, C. Schwarz, J. Schröder

Comparing heterogeneity and Linear Kinematic Features in sea ice models with Viscous-Plastic and Maxwell Elasto-Brittle rheologies

M. Bourgett, M. Losch, M. Plante

Simulating Sea Ice Faster with GPUs

R. Jendersie, C. Lessig, T. Richter

A model for ice-mélange based on particle and continuums mechanics

S. Kahl, C. Mehlmann

Modelling freezing and BioGeoChemical processes in Antarctic Sea Ice

R. Pathak, T. Ricken, S. M. Seyedpour, A. Thom, S. Thoms, B. Kutschan

Dynamical low-rank based optimisation for computing eigenvalues in nuclear engineering

C. Scalone

Multi-level dynamical low-rank approximation for grid-based radiation dose calculations

P. Stammer, J. Kusch, N. Wahl, D. Lathouwers

Multi-scale simulations of thermal radiative transfer equations using dynamical low-rank approximation

C. Patwardhan, J. Kusch, M. Frank

Projected exponential methods for stiff dynamical low-rank approximation problems

B. CARREL, B. VANDEREYCKEN

Memory and time efficient neural network training via dynamical low-rank approximation

S. Schotthoefer, E. Zangrando, J. Kusch, G. Ceruti, F. Tudisco

On dynamical low-rank approximation for the Su-Olson problem

L. Baumann, L. Einkemmer, C. Klingenberg, J. Kusch

An operator-theoretic view on discretisation of random evolution equations

K. Klioba, C. Seifert

Dynamic Control of a Soft Robot: Combining Data and Model

M. Grube, R. Seifried

Error bounds for Koopman-based control

F. Nüske, S. Peitz, F. Philipp, M. Schaller, K. Worthmann

Index aware learning of differential algebraic equations

P. Förster, I. Cortes Garcia, S. Schöps, W. Schilders

Model reduction on manifolds: a differential geometric framework

P. Buchfink, S. Glas, B. Haasdonk, B. Unger

Stability and robustness in data-driven predictive control

J. Berberich

Utilising Closely Spaced Modes of Tower Structures for Damage Localisation using Multi-Objective Model Updating

J. Ragnitz, B. Hofmeister, C. Jonscher, C. Hübler, R. Rolfes

Uncertainty quantification for two-step model calibration using least-squares and Bayesian inference

J.-A. Tröger, U. Römer, S. Hartmann

Probabilistic parameter identification of a rate-dependent constitutive model for porcine stomach tissue

M. P. Wollner, C. S. Holzer, A. W. Caulk, G. A. Holzapfel

Aspects of parameter identification in thermoplasticity

L. Rose, A. Menzel

Optimization of the specimen geometry for one‑shot discovery of material models

S. Ghouli, M. Flaschel, S. Kumar, L. De Lorenzis

An extension of the Dynamic Regressor Extension and Mixing approach for real-time parameter estimation

A. Othmane

Aneurysm treatment: About in silico device insertion, a porous media surrogate and LBM Bloodflow simulations

F. Holzberger, M. Horvat, S. Lunowa, N. Nebulishvili, M. Muhr, D. Sytnyk, B. Wohlmuth

Microstructure-informed regional constitutive modeling of human brain tissue

N. Reiter, L. Bräuer, F. Paulsen, S. Budday

Modelling muscle-actuated motion: Benefits for internal mechanics, optimization and learning

I. Wochner, S. Schmitt, D. Haeufle

Modelling of micro crack healing in flexoelectric bones

C. Witt, T. Kaiser, A. Menzel

Stabilized Finite Element Simulation to Determine Washout in The Left Ventricle with Implanted Left Ventricular Assist Device

M. R. Schuster, N. Hosters, M. Behr

Constitutive modeling of active skeletal muscle in a continuum-mechanical model of the human shoulder

L. Engelhardt, R. Sachse, R. Burgkart, W. A. Wall

Finite Element Modelling of Concentrated Impact Loads on the Masticatory Muscles at the Head

Z. Wang, R. Behrens, N. Elkmann, D. Juhre

Identifying a suitable material model to simulate the implantation process of endoprostheses into human bone

C. Strackeljan, F. Duvigneau, E. Woschke

On the application of the Finite Cell Method to static analysis of trabecular bone tissue specimen using high-resolution microCT data

M. A. Shahmohammadi, I. Fiedler, B. Busse, A. Düster

Numerical simulation of individualized flow diversion cerebral aneurysms treatment

H. Q. Do, D. Juhre, R. Makvandi, A. Ding

Sensitivity study of a computational model for endovascular coil deployment in cerebral aneurysms

F. Holzberger, M. Muhr, B. Wohlmuth

A comparison of micromorphic gradient-extensions for anisotropic damage

T. van der Velden, T. Brepols, S. Reese, H. Holthusen

Model order reduction for problems involving gradient-extended damage and plasticity

T. Brepols, J. Kehls, S. Kastian, S. Reese

A gradient-extended two-surface damage-plasticity model based on the star-convex decomposition of the strain energy

J. Zhang, T. Brepols, S. Reese

Theoretical and Applied Strategies for Numerical Damage Optimisation

F. Guhr, F.-J. Barthold

An implicit gradient-enhanced microplane damage material model in the coupled implicit MPM-FEM

O. A. Oropeza Navarro, A. Chihadeh, J. Platen, M. Kaliske

Remeshing in the Finite Cell Method for different types of geometry descriptions

R. Sartorti, A. Düster

Immersed isogeometric analysis with boundary-conformal quadrature for large deformation problems

Y. T. Elbadry, P. Antolin, O. Weeger

On the importance of exact geometry representation for shell geometries with highly changing curvature

W. Dornisch, N. Azizi

A scaled boundary shell formulation in isogeometric analysis for static and dynamic analysis

M. Reichle, A. Hellers, S. Klinkel

The Mixed Displacement Method to Avoid Shear Locking in Problems in Elasticity

T. K. M. Vinod Kumar Mitruka, M. Bischoff

Simulation of Axisymmetric Problems Using the Petrov-Galerkin Finite Element Method

F. Zähringer, P. Betsch

Experimental nonlinear modal analysis: its potential and recent advancements

M. Scheel

Modal Analysis and Modal Damping of MIKOTA's Vibration Chain

P. C. Müller, W. Weber

Experimental analysis of oscillations of a rotor supported by gas foil bearings.

B. Sorgec, R. Liebich

Inductive mode selective damping of structural vibrations

M. Rosenboom, H. Hetzler

Multistage parameter identification of a finite-strain viscoelastic-viscoplastic material model for biobased thermosets

L. Laubert, S. Pfaller

Frequency domain analysis of viscoelastic elastomer blends considering interfacial transition zones

M. Ulrich, M. Petö, S. Eisenträger, D. Juhre

Experimental analysis of a beam with a 2D triangular substructure

N. Panjalipoursangari, A. Morozov, W. Müller, C. Völlmecke

Material Plasticity - Development of the material stiffness in fiber-reinforced materials with large plastic deformations

M. Weber, R. Glüge, H. Altenbach

A Framework Incorporating Rate-Independence in Phase-Field Modeling with Application to Hysteretic Effects in Shape Memory Alloys

O. El Khatib, V. von Oertzen, B. Kiefer

Modeling of interface elasticity within Allen-Cahn type phase field theory

H. Wilbuer, P. Kurzeja, J. Mosler

A coupled approach for generalized hyperelastic continua and phase fields

J. Doghman, A. Ask, C. Bovet

FE-Implementation and Application of a Fully Coupled Chemo-Mechanical Phase-Field Model

S. Roth, A. Seupel, B. Kiefer

On the behaviour of a phase field model for wetting on sinusoidally shaped surfaces

J. Kunz, H. Hasse, R. Müller

Phase separation in metal hydrogen systems predicted by Cahn-Hilliard type phase-field simulations

A. Dyck, S. Wagner, A. Pundt, T. Böhlke

Numerical multiphase yield design modelling of reinforced soil structures: a focus on the interaction between soil and inclusions

E. Donval, G. Hassen, P. de Buhan

Comparative Analysis of Fracture Simulation Methods in Finite Element Models for Multiphase Materials and Multiscale applications

R. Najafi Koopas, S. Rezaei, N. Rauter, R. Ostwald, R. Lammering

Analytical strain localization for inhomogenous eigenstrains in lamellar materials

C. Klein, A. Dyck, T. Böhlke

Numerical polyconvexification of isotropic damage

D. Balzani, M. Köhler, T. Neumeier, M. A. Peter, D. Peterseim, D. Wiedemann

Morphology-Based Homogenization of Thermodynamic Driving Forces and Mechanical Properties in Phase Transforming Materials

V. von Oertzen, B. Kiefer

Rate-dependent effects in micromechanical constitutive multiscale modeling of ferroelectrics

A. Warkentin, A. Ricoeur

Application and parameter identification of the Lagrangian-averaged vorticity deviation vortex detection method in three-dimensional flows around solid bodies

K. A. Kovács, E. Balla

Energy stability analysis of MHD flow in a rectangular duct

T. Boeck, M. Brynjell-Rahkola, Y. Duguet

Modeling active suspensions with the mixture theory

H. Ben Gozlen, Y. Wang, M. Oberlack

A degenerate cross-diffusion system as the inviscid limit of a nonlocal tissue growth model

M. Schmidtchen, T. Debiec, N. David, M. Mandal

Fast-slow limits for gradient flows on metric graphs

G. Heinze, J.-F. Pietschmann, A. Schlichting

Degenerate flow and transport problems in porous media with vanishing porosity

R. Schulz

Hypocoercivity in Hilbert spaces

F. Achleitner, A. Arnold, E. Nigsch, V. Mehrmann

Compactness and existence theory for the nonlocal radiative-temperature equation

E. Demattè, J. W. Jang, J. Velázquez

UM-Bridge: Bridging the Gap between Advanced UQ and Advanced Models from Prototype to HPC

L. Seelinger, A. Reinarz

Combining noisy well data and expert knowledge in a Bayesian calibration of a flow model under uncertainties: an application to solute transport in the Ticino basin

E. Baker, S. Manenti, A. Reali, G. Sangalli, L. Tamellini, S. Todeschini

Bayesian data assimilation for complex wetting processes with transport maps and stochastic surrogates

H. Bonart, Y. Marzouk

Scale-bridging within a complex model hierarchy for investigation of an innovative circular energy economy by use of Bayesian model calibration

L. Gossel, E. Corbean, S. Dübal, P. Brand, J. Neumann, M. Fricke, H. Nicolai, P. Stephan, C. Hasse, S. Hartl, S. Ulbrich, D. Bothe

Uncertainty of mechanical properties of short-fiber reinforced polymers manufactured by injection-molding process

B. Rohrmüller, J. Hohe, L. Kärger, C. Beckmann

Stabilization of topology optimization problems using Voronoi tessellations

G. Kikis, B. Sauren, C. Birk, S. Klinkel

Shape Design Optimization of a flat Endmill Tool

A. Kalu-Uka, K. Moerman, P. Eberhard

Remarks on Shape Sensitivity Analysis of Dynamic Structures

S. A. Ghasemi, J. Liedmann, F.-J. Barthold

Analysing sensitivity information of composite laminate shell structures

J. Liedmann, F.-J. Barthold, G. Nikolai

Prediction of CO2 uptake on activated carbon by artificial neural networks

S. Venturella, C. Z. Brusamarello, F. B. de Souza

Voronoi diagrams and Finite Volume methods in any dimension

M. Heida

DG-type reconstructions for SBP finite difference schemes

D. Bach, G. J. Gassner, A. M. Rueda-Ramírez

Monolithic Convex Limiting For Legendre–Gauss–Lobatto Discontinuous Galerkin Spectral Element Methods

A. M. Rueda-Ramírez, B. Bolm, D. Kuzmin, G. Gassner

Numerical Solution of Ultra-Relativistic Euler Equations using Discontinuous Galerkin Finite Element Method

M. Mairaj

deal.t: An implementation of T-splines within the \texttt{deal.II} framework

S. Beuchler, R. Hiniborch, P. Morgenstern

TrixiParticles.jl: an accessible numerical framework for particle-based simulations in Julia

E. Faulhaber, N. Neher, S. Berger, M. Schlottke-Lakemper, G. Gassner

An ADMM-based time domain decomposition approach for PDE constrained optimization

S. Ulbrich

On vanishing state constraints for parabolic PDEs with applications to hybrid optimal control

C. Kuchler, F. Hante

Global minimization of polynomial integral functionals with semilinear elliptic PDE constraints

G. Fantuzzi, F. Fuentes

Optimal control for a class of hypocoercive Fokker-Planck equations

T. Breiten, K. Kunisch

Adjoint-based calibration of nonlinear stochastic differential equations

J. Bartsch, R. Denk, S. Volkwein

Risk-averse optimal control of random elliptic variational inequalities

A. Alphonse

Gradient-free control algorithms for convex optimization problems

V. Grushkovskaya

A port-Hamiltonian perspective on energy-optimal control of adaptive high-rise buildings

B. F. Oppeneiger, A. Zeller, M. Schaller, K. Worthmann, O. Sawodny, C. Tarin, M. Böhm

Optimized Self-Consumption of Renewable Energies with Forecast-Based Energy Management for Agricultural Farms

E. Dierkes, L. Kappertz, V. Solovievskyi, A. Hackenberg, C. Büskens

Robust and Efficient Hybrid Optimal Control via Gaussian Process Regression and Multiple Shooting with Experimental Validation on a Double Pendulum on a Cart

M. Hesse, J. Timmermann, A. Trächtler

Optimal trajectories for a Dubins vehicle in mode-target games

M. V. A. Pedrosa, A.-K. Schmuck, K. Flaßkamp

Commutator-free based on Cayley transform for quantum optimal control problems

B. Wembe, S. Maslosvkaya, S. Ober-Blöbaum, C. Offen, P. Singh

Virtual X-rays: parallel-beam tomography hidden within electric probing

S. Siltanen

Denoising of Sphere- and SO(3)-valued Data by Relaxed Tikhonov Regularization

R. Beinert, J. Bresch, G. Steidl

Accelerating 3D Topology Optimization through Sample-Efficient Deep Learning

D. Erzmann, S. Dittmer

Postprocessing U-Net for the Kuopio Tomography Challenge 2023

A. Denker, T. Freudenberg, T. Kluth, Z. Kereta, I. Singh, S. Arridge

Model Reduction of Hamiltonian systems: From the formulation on manifolds to data-driven realizations

P. Buchfink, S. Glas, B. Haasdonk, H. Mu, B. Unger

Reducing the entry barrier of Peridynamic simulations

J.-T. Hesse, C. Willberg, A. Pernatii

Gradient based optimization method for temporal multiscale differential problems

D. Chang Dominguez, T. Richter

MESHFREE Simulations for Industrial Applications

F. Castelli, I. Michel, J. Kuhnert

Robust matrix-free polynomial preconditioning using the hyper-power method

M. Ł. Mika, M. F. P. ten Eikelder, D. Schillinger, R. R. Hiemstra

On the approximation of vector-valued functions by samples

D. Kressner, T. Ni, A. Uschmajew

Learning stochastic reduced order models from data

M. A. Freitag, J. M. Nicolaus, M. Redmann

A time-aware tensor decomposition for concept evolution

C. Chatzis, C. Schenker, M. Pfeffer, P. Lind, E. Acar

A novel univariate feature selection filter-measure based on the reduction of class overlapping

J. C. Liaw, F. Geu Flores

On Efficient and Accurate Kernel-Based Interpolation/Regression for Dynamic Datasets

H. Kapadia, L. Feng, P. Benner

Mathematical insights on embedding theories.

A. Kirsch

Multi-center decomposition of molecular densities: A numerical perspective

Y. Cheng

Parallel Coordinate Descent Methods for Full Configuration Interaction

Y. Zhang, W. Gao, Y. Li

On algebraic varieties and roots in coupled cluster theory

F. M. Faulstich, B. Sturmfels, S. Sverrisdóttir

Coupled Cluster for Periodic Systems

R. Schneider

Contributions of 4D imaging in mechanics of materials

F. Hild

Enforcing physics structure in scientific machine learning: The role of projection-based reduced-order modeling

K. E. Willcox

Bi-linear Control Based On gEDMD for Metastable Systems

L. Guo, F. Nüske, J. Heiland

Smooth clustering-based autoencoders for very low-dimensional parametrizations of fluid flow models

J. Heiland, Y. Kim

Physics-based, non-intrusive modeling for systems with spatially localized behavior through reduced/full-order model coupling

L. Gkimisis, N. Aretz, M. Tezzele, P. Benner, T. Richter, K. E. Willcox

Error analysis for hybrid finite element/neural network discretizations

U. Kapustsin, U. Kaya, T. Richter

Source Detection on Graphs

S. Feldmann, S. Sager, V. Kaibel

Refined TSSOS

D. Shaydurova, V. Kaibel, S. Sager

On the homogenization into generalized continua: a computational approach for parameter identification for the Relaxed Micromorphic Model

L. Scheunemann, M. Sarhil, J. Schröder, P. Neff

Reinterpreting laminate composite voxels in computational micromechanics: level sets and assumed strain methods

J. Lendvai, M. Schneider

Co-Design of variational formulations and par- allel solvers in Non-Isothermal Thermo-Chemo- Mechanics: Comparison of Minimization and Saddle- Point formulation and scalability studies

B. Kiefer, S. Prüger, O. Rheinbach, F. Röver

Phase transformation in elasto-plastic materials - a multi-phase simulation

S. Dinkelacker-Steinhoff, K. Hackl

Structure-preserving approximation for quantitative variational phase-field models in the context of powder-bed fusion additive manufacturing

A. Brunk, H. Egger, O. Habrich, T. Oyedeji, D. Schumann, B.-X. Xu

Mapping Shear Transformation Zones in Silica Network Glass

S. Shekh Alshabab, Z. Wu, B. Markert, F. Bamer

Foundations of Supervised Deep Learning for Inverse Problems

A. Auras, M. Burger, S. Kabri, M. Möller

Combinatorial and implicit views on parameter optimization in neural networks

G. Montufar

Regularized, structure-preserving neural networks for the minimal entropy closure of the Boltzmann moment system

S. Schotthoefer, P. Laiu, C. Hauck, M. Frank

Adaptive Step Sizes for Preconditioned Stochastic Gradient Descent

F. Köhne, L. Kreis, A. Schiela, R. Herzog

Non-vacuous PAC-Bayes bounds for Models under Adversarial Corruptions

W. Mustafa, P. Liznerski, A. Ledent, D. Wagner, P. Wang, M. Kloft

Convergence results for gradient flow and gradient descent systems in artificial neural network training

A. Ahmadova

Comparison of Pericardium Modeling Approaches for Mechanical Whole Heart Simulations

J. Krauß, T. Gerach, L. Stengel, C. Wieners, A. Loewe

Modeling and Simulation of Pharmaco-Mechanical FSI for an Enhanced Treatment of Cardiovascular Diseases - Part I: Modeling Aspects

S. Nurani Ramesh, K. Uhlmann, D. Balzani

Modeling and Simulation of Pharmaco-Mechanical FSI for an Enhanced Treatment of Cardiovascular Diseases - Part II: Numerical Methods, Software, and Results

L. Saßmannshausen, A. Klawonn, J. Knepper, A. Heinlein

SimLivA - A Data-Integrated, Continuum-Biomechanical Framework for In-Silico Staging of Ischemia-Reperfusion Injury During Liver Transplantation

L. Mandl, S. Gerhäusser, L. Lambers, U. Dahmen, M. König, H.-M. Tautenhahn, T. Ricken

Learning bifurcation structures in the small-data limit using reservoir computing

M. Yadav, M. Stender

Hybrid Modelling of Multibody Systems: Application of Two Discrepancy Models for Trajectory Prediction

M. Wohlleben, L. Muth, W. Sextro, P. Eberhard

Artificial Recurrent Model for Parameter Identification of Dynamic Systems

T. Bielitz, D. Bestle

A deep learning approach to calculate elementary effects of Morris sensitivity analysis

R. Raj, A. Tismer, L. Gaisser, S. Riedelbauch

An iterative-closest-point algorithm for marker-free 3D shape reconstruction of tube-like continuum robots

M. K. Hoffmann, Z. Ding, J. Mühlenhoff, T. Sattel, K. Flaßkamp

Optimization of Crash Box Design in Crashworthiness Analysis Using Reinforcement Learning

A. Borse, R. Gulakala, M. Stoffel

Convex integration applied to the compressible Euler equations: non-uniqueness and admissibility criteria

S. Markfelder

On Non-Strict Hyperbolic Systems and Related Wave Phenomena

F. Thein

Asymptotic Preserving Numerical Methods for Linear Kinetic Transport Equations Based on Upwind SBP Schemes Combined with Multiderivative RK Methods

S. Ortleb

Convergence of FE schemes for compressible flows via dissipative weak solutions

P. Öffner

Distributed optimal feedback control and neural networks

L. Grüne, M. Sperl

NMPC for Cyber-Physical Systems – Decentralized Algorithms for Dynamic Real-Time Collaboration

T. Faulwasser, G. Stomberg, A. Engelmann

Distributed control of nonlinear constrained multi-agent systems: A tracker-planner framework using local model predictive controllers and Voronoi partitions

J. Köhler, R. Rickenbach, A. Scampicchio, M. N. Zeilinger, A. Carron

A Fixed-Point Iteration Scheme for Sensitivity-Based Distributed Optimal Control

M. Pierer von Esch, A. Völz, K. Graichen

Sensitivity Analysis of the Performance of a Distributed MPC Scheme on an Occupancy Grid in Combination with Priority Rules

T. Sprodowski

Distributed Control Under Attack: Identifying Anomalous Behavior with Inverse Optimal-Control

H. Ebel, P. Eberhard

Adaptive Hierarchical Modeling of Friction

A. Rademacher

Dual based and goal oriented adaptivity by means of upwind and downwind approximations

R. Mahnken

Surrogate models for shape uncertainty quantification

L. Scarabosio

On data-driven moment closures for radiative transfer

M. Schlottbom

Hierarchical modelling in benchmarking, analysis and code development for coupled geo-processes

T. Nagel, J. Buchwald, T. Helfer

On the systematic coupling of multiphysics, multiscale, and multidomain problems

H. Egger

Eigenvalue optimization and matrix nearness problems via constrained gradient systems.

N. Guglielmi, C. Lubich

Structured eigenvalue backward errors for rational matrix functions with symmetry structures

A. Prajapati, P. Sharma

Computing sep-lambda, a measure of how close two square matrices are to sharing an eigenvalue

T. Mitchell

Distance to singularity a ``common'' problem for dissipative Hamiltonian matrix pencils

C. Mehl

Nearest singular pencil via Riemannian optimization

F. Dopico, V. Noferini, L. Nyman

Gaussian Process Surrogate for Bayesian Parameter Estimation Involving Incompressible Fluids

H. Wendland, I. Sloan, Q. T. Le Gia

How many neurons do we need? A refined analysis for shallow networks trained with gradient descent

N. Mücke, M. Nguyen

Some results on the NTK spectrum and spectral bias of neural networks in the kernel regime

G. Montufar

Kernel Methods for Koopman-based Modeling

F. Nüske

A new reformulation of the Muskat problem with surface tension

A. Matioc, B. Matioc

The Mullins–Sekerka equation: Existence theory and weak-strong stability for a novel weak solution concept

J. Fischer, S. Hensel, T. Laux, T. Simon, K. Stinson

A Non-local Free Boundary Problem Arising in a Model of Cell Polarization

A. Logioti, B. Niethammer, M. Röger, J. J. L. Velázquez

Phase-Field Models for Organic Solar Cell Production

C. Tretmans, J.-F. Pietschmann

Comparison of the fracture toughness of two species of cactus using phase field modeling

P. Dondl, M. Mylo, O. Speck, L. Striet

A free boundary model for transport induced neurite growth

G. Marino, J.-F. Pietschmann, M. Winkler

A hybrid mixed variational formulation and discretization for the linear transport equation

N. Beranek

AI-enhanced integrators for lifetime analysis of wind turbines

A. Othmane, K. Flaßkamp

Approximation of Stochastic Evolution Equations

K. Klioba

Challenges in the Simulation of Rotating Electric Motors using Isogemetric Analysis

M. Merkel, S. Schöps

Constitutive modeling of human brain tissue

N. Reiter, L. Bräuer, F. Paulsen, S. Budday

Coupled multiscale bone modeling

M. Blaszczyk

Curvature-driven pattern formation in Biomembranes

J. Ginster, A. Pešić, B. Zwicknagl

Dynamical Systems as a Machine Learning Framework

M. Stender

MESHFREE Simulations with the Generalized Finite Difference Method

F. Castelli

Novel geometric integrators for multibody systems

P. L. Kinon, P. Betsch

Performance guarantees meet data-driven control

L. Lanza

Phase-Morphology-Based Homogenization

V. von Oertzen

Quantum computing through the lens of control

J. Berberich

Strong simulations for strong magnets: The effects of defects

M. Reichel, J. Schröder

Time-separated stochastic mechanics

H. Geisler, P. Junker

A Thermodynamic framework for constructing a constitutive model accounting for fiber reorientation through active and passive responses

R. KUMAR

Constitutive Modeling of Viscoelastic Behavior and Irreversible Damage in Porcine Pulmonary Artery

M. Reddipaga, K. Kannan, S. Baek

Fast simulation of coronary in-stent restenosis: a non-intrusive data-driven reduced order surrogate model

J. Shi, K. Manjunatha, S. Reese

Constitutive Artificial Neural Networks (CANNs): A framework for inelastic anisotropic soft biological tissues

K. Linka, K. P. Abdolazizi, C. J. Cyron

Towards Using Active Learning Methods for Human-Seat Interactions To Generate Realistic Occupant Motion

N. Fahse, M. Harant, M. Obentheuer, J. Linn, J. Fehr

Fracture modeling of flexoelectric materials with mixed FE

P. H. Serrao, S. Kozinov

Multiscale damage analysis based on the variational effective model

X. Xu, G. Jezdan, Y. He, K. Hackl

A finite element framework for thermo-mechanically coupled gradient-enhanced damage formulations

L. Sobisch, T. Kaiser, A. Menzel

Neural networks meet phase-field: A hybrid fracture model for elastomers

F. Dammaß, K. Kalina, M. Kästner

A multi-field decomposed model order reduction approach for thermo-mechanically coupled multiphysics simulations including damage

Q. Zhang

A novel approach for a thermo-mechanically coupled and gradient-enhanced damage model

F. Liu, D. R. Jantos, P. Junker

Analysis and Simulation of curved hoses under internal pressure - 3D continuum models

Q. Hoesch, M. Roller, F.-J. Schneider-Jung, J. Linn, R. Müller

Influence of support conditions for violin plates in experimental modal analysis

B. Rauh, Ö. Akar, K. Willner

Approximate dual basis functions for mass lumping within explicit IGA simulations

S. Held, S. Eisenträger, W. Dornisch

On the potential of approximate dual basis functions towards efficient mixed plate formulations in isogeometric analysis

L. Stammen, W. Dornisch

A closed-form approach on mode III loading of thin layers

F. Rheinschmidt, V. Adam, P. Weißgraeber, P. L. Rosendahl

Friction damping in structural dynamics: from fundamental understanding to physics-based machine learning identification

L. Marino

A Rational Ansatz for the Approximation of Koopman Eigenfunctions

U. J. Römer, M. Breitenhuber

Quantifying Uncertainty in Neural Network predictions of forced vibrations

T. Westmeier, D. Kreuter, H. Hetzler, P. Seitz, G. Chalvatzaki

Complex dynamics of coupled nonlinear oscillators from a functional networks perspective

C. Geier, M. Stender, N. Hoffmann

Characterization of music effect pedals by data analysis

F. Rentzsch, P. Wulff, H. Gödecker, U. von Wagner

Modelling material properties of composites using stochastic tensor approach

W. J. Schuttert, M. I. Abdul Rasheed, B. Rosić

Notes on the Schapery model to describe non-linear viscoelastic phenomena

M. A. Margalho de Barros, S. Govindjee, J. Schröder

Viscoelastic Constitutive Artificial Neural Networks (vCANNs) – a framework for data-driven anisotropic nonlinear finite viscoelasticity

K. Abdolazizi, K. Linka, C. Cyron

A thermodynamically consistent physics-informed neural network model for nanoparticle-filled epoxy nanocomposites with moisture content

B. Bahtiri, B. Arash, S. Scheffler, M. Jux, R. Rolfes

Constitutive artificial neural network for elasto-plastic material behavior

B. Boes, J.-W. Simon, H. Holthusen

Determination of critical local straining conditions for solidification cracking at laser beam welding by experimental and numerical methods

N. Bakir, A. Gumenyuk, M. Rethmeier

Application of a multi-object tracking algorithm to investigate thermo-fluid dynamics of the melt pool during laser beam welding

C. Forster, R. Rothfelder, P. Krakhmalev, M. Hummel, C. Spurk, F. Beckmann, M. Schmidt

Performance Analysis for the Free Surface Lattice Boltzmann Method for High Performance Computing

J. Plewinski, C. Alt, U. Rüde, H. Köstler

A microstructural thermoelastoplastic analysis of the mushy zone during laser beam welding

P. Hartwig, L. Scheunemann, J. Schröder

Efficient parallel finite element simulations of laser beam welding processes

T. Bevilacqua, A. Klawonn, M. Lanser, A. Wasiak

Efficient Simulation Strategy to Investigate a PTW Safety Concept

J. Fehr, S. Maier

Microstructure reconstruction for realistic RVEs: harnessing descriptor differentiability

P. Seibert, A. Raßloff, K. Kalina, M. Kästner

Active learning for inverse mesostructure design

A. Raßloff, P. Seibert, K. Kalina, M. Kästner

Fiber orientation-length coupling in short-fiber reinforced composites

A. R. Mehta, M. Schneider

Microstructure generation for discontinuous long curved fiber-reinforced polymers via optimization on curved manifolds along the geodesics

C. Lauff, M. Schneider, T. Böhlke

Quantification of Microstructure-Related Uncertainties in Macroscopic, Structural Quantities of Interest based on Artificial Microstructures and the FE2-Method

H. Dorn, N. Miska, D. Balzani

Aspects of numerical efficiency and viability in the optimization of minimal-surface-based periodic microstructures

A. Krischok, B. Yaraguntappa, M.-A. Keip

Active flow control for road vehicles

S. Krajnovic

Modeling for surrogate-based optimization of actuation parameters for active drag reduction in turbulent boundary layer flows

F. Hübenthal, M. Meinke, W. Schröder

Numerical investigation of drag reduction effects on a track bicycle fork using airfoils with a wavy leading edge

M. Klein, R. W. Kessler, H. Schmidt

A note on the generalized Jacobian in the sense of Clarke for the inverse of a bi-Lipschitz map and applications in relaxation theory

G. Dolzmann, F. Behr

Stress-mediated growth determines E. Coli division site morphology

C. Allolio, L. Chao, M. Dostalík, P. Pelech

Convergence of equilibria of thin elastic plates in a discrete model - The von Kármán case

D. Buchberger, B. Schmidt

Dimension reduction for elastoplastic rods in the bending regime

K. Richter, S. Neukamm

Inertial evolution of non-linear viscoelastic solids in the face of (self-)collision

A. Češík, G. Gravina, M. Kampschulte

Sparse polynomial chaos expansions: a review of recent developments

B. Sudret

Advanced Directional Importance Sampling Method for Dynamic Reliability Analysis of Linear Structural Systems under Stochastic Non-Gaussian Loading

X. Zhang, M. Misraji, M. Valdebenito, M. Faes

Efficient model order reduction of vibroacoustic problems under stochastic loads

Y. Hüpel, U. Römer

Statistical reduced order modelling for frequency dependent PDEs

L. Hermann, U. Römer

Towards a Sampling-Free Statistical Finite Element Method in Computational Mechanics

V. Narouie, H. Wessels, U. Römer

Sequential topology optimization for additive manufacturing

D. R. Jantos, M. Kick, P. Junker

An experimental validation of optimized structures with hardening material behavior

M. Kick, P. Junker

On varying time integration schemes for a density-based topology optimization approach at large deformations

M. von Zabiensky, D. R. Jantos, P. Junker

Topology Optimization of Continuum Structures using Simultaneous Stress and Displacement Constraints

F. Rutsch, M. Fina, S. Freitag, O. Weeger

Cavity Shape Optimization in Injection Molding to Compensate for Shrinkage and Warpage

S. Tillmann, S. Elgeti

Sustainability in bridge design – investigation of the potential of topology optimization and additive manufacturing on a model scale

D. Masarczyk, T. Arold, T. Niendorf, D. Kuhl

Energy-adaptive and Riemannian Newton methods for Problems of Kohn-Sham Type

R. Altmann, D. Peterseim, T. Stykel

The least-squares method in the theory of nonlinear periodic boundary value problems with concentrated delay

P. Benner, S. Chuiko, V. Chuiko

Adomian decomposition method for nonlinear boundary-value problems unsolved with respect to the derivative

P. Benner, S. Chuiko, O. Nesmelova

Higher-order operator splitting methods for port-Hamiltonian systems

M. Mönch, N. Marheineke

Proper Orthogonal Decomposition for port-Hamiltonian energy networks

A. F. Ortegón Villacorte, S.-A. Hauschild, N. Marheineke

A posteriori estimates for a coupled piezoelectric model

T. Samrowski, U. Langer, S. Repin

Control in the coefficients of an elliptic differential operator: topological derivatives and Pontryagin maximum principle

D. Wachsmuth

Asymptotics and Optimal Control for Radiative Processes

R. Pinnau

Optimal Control of the Generalized Riemann Problem for Hyperbolic Systems of Conservation Laws

J. Breitkopf, S. Ulbrich

A Variational Calculus for Optimal Control of Networks of Scalar Conservation or Balance Laws

M. Steinhardt, S. Ulbrich

Semi-smooth Newton Method for parabolic PDE-constraint Optimization

A. Reinhold, K. Urban

Local extrema in two-phase optimal design problems

M. Vrdoljak, P. Kunštek

Modelling Gas Networks with Compressor Stations: A Port-Hamiltonian Approach

T. Bendokat, P. Benner, S. Grundel, A. S. Nayak

Behaviour of frame structures with pseudoelastic shape memory alloy damping elements

M. Kuczma, M. Łasecka-Plura, A. Tabrizikahou, J. Białasik

Frequency response function for systems incorporating viscoelastic elements with uncertain-but-bounded parameters

M. Łasecka-Plura, M. Kuczma

Estimation of nonparametric restoring forces for nonlinear mechanical single-degree-of-freedom systems: a robust and effective approach

R. Eberle

Data driven enhanced methods in terahertz tomography including a partially learned Landweber iteration

T. Schuster, C. Meiser

Using feasibility constraints in the data space do deal with unknown rigid motion in (Nano-)CT

B. Ehlers, A. Wald, J. Lucht, T. Salditt

Real data EIT reconstruction using virtual X-rays and deep learning

S. Rautio, M. Alsaker, F. Moura, J. P. Agnelli, R. Murthy, J. Mueller, M. Lassas, S. Siltanen

Reconstruction of active forces generated by actomyosin networks

E. Klass, A. Wald

Motion Correction in Fluorescence Microscopy

S. Beutler, M. Kunisch, C. Pilger, T. Huser, B. Wirth

Identification of temperature-dependent material parameters in piezoelectricity

R. Kuess, B. Jurgelucks, A. Walther

Optimal Dirichlet Boundary Control by Fourier Neural Operators Applied to Nonlinear Optics

N. Margenberg, F. X. Kärtner, M. Bause

Parameter Identification for a Two-Compartment Contrast Flow Field Model

S. Externbrink, D. Ruprecht, S. Götschel

Data- and knowledge-constrained splines for the prediction of physical phenomena

C. Haag, M.-A. Keip, F. Fritzen

Isogeometric methods for the simulation of electric motors considering rotation

M. Merkel, B. Kapidani, R. Vázquez, S. Schöps

Some remarks on Lode angle and Lode parameter

O. T. Bruhns

Karl Schellbach (1804–1892) – one of the fathers of the Finite Element Method?

P. Ullrich

„The fruit trees were in full bloom and the weather allowed coffee to be taken outdoors.“ New Perspectives on the History of the Association of Applied Mathematics and Mechanics (GAMM) 1920-1970

J. Lemberg

On the Heritage of Kurt Magnus in Gyro Technology

J. F. Wagner

Timoshenko and the Creation of new Elements in Teaching Mechanics

H. Altenbach

Neural ODE for Hamiltonian Systems with Irregular and Noisy Data

K. Janik, P. Goyal, P. Benner

Functional SDE approximation inspired by a deep operator network architecture

M. Eigel, C. Miranda

Approximating Langevin Monte Carlo with ResNet-like Neural Network Architectures

M. Eigel, C. Miranda, J. E. Schütte, D. Sommer

Blending Finite Volume Fluxes with Reinforcement Learning

S. R. Schmickler, G. Gassner

Extending denoising diffusion generative models by respecting physical constraints

J.-H. Bastek, S. W. Sun, D. M. Kochmann

Exploring Electrostatic Effects in Aqueous Nanosystems: From Continuum Models to Classical Force Field Simulations and Machine Learning

P. Loche

A L^2 maximum principle on the disk with applications to continuum solvation models

T. Carvalho Corso, B. Stamm, A. Jha, M. Hassan

Julia MolSim: Bridging the Gap between Mathematical Research and Practical Applications in Molecular Simulations

C. Travelletti, M. Herbst

Complex Activation and Catalytic Cycles of Deubiquitinylase Enzymes

M. Ilter, M. Stein

Molecular dynamics-based investigation of polymer fracture

M. Ries, F. Weber, P. Steinmann, S. Pfaller

The effect of active leg swing on walking template model dynamics

D. Renjewski

Model Order Reduction of Collision Models for Safe Human-Robot Collaboration

E. Leinert, R. Behrens, E. Woschke

Determination of the mechanical properties of the sacroiliac joint of a dog by imaging measurement methods and model update in a multi-body model

C. Daniel, S. Burkhardt, N. Röhrmann, F. Wagner, E. Woschke

Kinematic Hardening and Size Effects in Elastoplastic Nonlinear Timoshenko Beams

T. Gärtner, S. van den Boom, J. Weerheijm, L. Sluys

Isotropic growth model for generalised scaled boundary isogeometric analysis on slender structures

F. Spahn, F. Kolisch, M. Praster, E. Rosado Balmayor, S. Klinkel

Physics-enhanced neural networks for material modeling in beam theory

J. O. Schommartz, J. C. Alzate Cobo, D. Klein, O. Weeger

Merging traditional and neural network material modeling

K. A. Meyer

On neural networks as propagators in data-driven inelasticity

M. Harnisch, T. Bartel, B. Schweizer, A. Menzel

Domain decomposition approaches for the saddle point problem of thermoelasticity

T. Bevilacqua, A. Klawonn, M. Lanser, A. Wasiak

CALPHAD-based thermodynamic modelling and phase field simulations of dendritic solidification in austenitic stainless steel

M. Umar, D. Schneider, B. Nestler

Insights from Sustainable Data Management in Investigating Solidification Crack Formation

A. Janki

Statistically compatible hyper-reduction for computational homogenization

S. Wulfinghoff

Nonlinear model order reduction using manifold learning techniques for computations on representative volume elements

E. Faust, L. Scheunemann

A Comparative Study Between a Phenomenological, a Hybrid Neural Network and a Hyper ROM FE² Approach for Multiscale Simulations

N. Lange, G. Hütter, M. Abendroth, A. Malik, B. Kiefer

Stochastic modeling of a turbulent hydrogen/nitrogen jet flame in a vitiated coflow

T. Starick, H. Schmidt

Optimising production of synthetic natural gas (SNG) from methane synthesis

R. Rakhi, F. Mauss

Detached eddy simulation (DES) of a turbulent premixed flame stabilized on a bluff body

A. HEMAIZIA, D. Thévenin, C. Chi

Approximation and existence of a viscoelastic phase-field model for tumour growth in two and three dimensions

H. Garcke, D. Trautwein

Weak stabilty of the three-dimensional axisymmetric Ericksen-Leslie model

J. Kortum, C. Wang

The Quasi Continuous-Level Monte Carlo Method and its Applications

A. Barth, C. Beschle

Towards Multilevel Slice Sampling for Bayesian inverse problems

K. Bitterlich, B. Sprungk

A parallel high-performance multi-level Monte Carlo method with memory constraint and CPU-time budget

N. Baumgarten

Semismooth Newton Methods for Minimization Problems with Box-Constraints in Sobolev Spaces

C. Christof, G. Wachsmuth

Sparse representation recovery in convex optimization through a metric non-degenerate source condition

M. Carioni, L. Del Grande

Solving Nonlinear Finite Element Problems in Hyperelasticity

L. Fesefeldt, S. Le Borne, A. Düster

On recent advancements in the development of Lattice Boltzmann methods for solids

H. Müller, J. Panov, A. Schlüter, R. Müller

Higher order iterative decoupling for poroelasticity

R. Altmann, A. Mujahid, B. Unger

DC Reformulation of Cardinality Constrained Problems in Function Spaces

B. Dittrich, D. Wachsmuth

Spatially sparse optimization problems

A. Lentz, D. Wachsmuth

TV-regularized optimal switching control of PDEs by sequential relaxation

P. Bock de Barillas, F. Hante, M. Hintermüller

A Note on the Local Observability of Uniform Hypergraphs

D. Gerbet, K. Röbenack

On the Observation of Glucose-Insulin Models

K. Röbenack, D. Gerbet

Artifacts arising in Harmonic Balance solutions of the softening Duffing oscillator

H. Dänschel, L. Lentz

Differential Prony-Type Method for Approximation of the Gaussians

N. Derevianko

Fourier-Domain Inversion for the Modulo Radon Transform

M. Beckmann

THE INFORMATION GEOMETRY OF SMART

M. Raus, Y. Elshiaty, S. Petra

Multiscale flow simulations of dilute polymeric solutions with bead-rod chains using Brownian configuration fields

A. Meier, E. Bänsch, F. Frank

Experiences from the development of a hybrid reduced order stochastic/LES solver for turbulent flows

P. Marinković, M. S. Schöps, J. A. Medina Méndez, M. Klein, H. Schmidt

Improving the convergence of pseudo-time stepping for CFD simulations with neural networks

A. Zandbergen, A. Heinlein, T. van Noorden

Greedy Sampling for Parameter Estimation in Partial Differential Equations

A. Forootani, S. Chellappa, H. Kapadia, P. Goyal, P. Benner

Structure preserving inference of mechanical systems

Y. Filanova, I. Pontes Duff, P. Goyal, P. Benner

Learning Linear and Quadratic Dynamical Systems with Guaranteed Stability

I. Pontes Duff, P. Goyal, P. Benner

Energy-Driven Decision-Making Across Biological Systems: From Gene Regulation to Population Dynamics

R. Kumar, I. G. Johnston

Shape-driven simulation of protein self-assembly

L. Mayrhofer, M. Evans, G. Friesecke

Uncertainty quantification for molecular statics via implicit differentiation

I. Maliyov, P. Grigorev, T. D Swinburne

The role of dynamic boundary conditions in diffuse-interface models

P. Knopf

Bridging the scales in mechanics: mesoscale modeling of crystals

M. Salvalaglio

Multiscale Analysis of Human Dura Mater – From Nano- to Macroscale

J. A. Niestrawska, A. vom Scheidt, D. Liprandi, M. Rodewald, N. Hammer

Seasonal variation of Elymus for the assessment of ecosystem services

J. Liu, Q. Liu, S. Kutschke, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl

Location and layer-dependent biomechanical characterization of the porcine small intestine wall

D. Hasselbeck, J. Liu, M. Böl

On the morphological and mechanical properties of filamentous pellets along the culture process

Q. Liu, J. Liu, Z. Kozanecka, R. Krull, M. Böl

Global sensitivity analysis for biomechanical models with dependent input parameters

S. Brandstaeter, A. Popp

Microscale Modeling of Damage Mechanisms in Dual-Phase Steel DP800

A. Niehüser, J. Mosler

INFLUENCE OF IMPACT LOADING ON CREEP, DAMAGE AND FRACTURE OF METALS

D. Breslavsky, O. Tatarinova, H. Altenbach

Concurrent Approximation of Rank-One Convex Envelopes with Application to Continuum Damage Mechanics

M. Köhler, T. Neumeier, M. A. Peter, D. Peterseim, D. Balzani

On the path-dependence of ductile damage models

K. Feike, K. Langenfeld, P. Kurzeja, J. Mosler

Mixed finite element implementation of plane crack problems within strain gradient elasticity

A. Y. Chirkov, L. Nazarenko, H. Altenbach

Analysis of failure of fibre-reinforced high performance concretes due to low cycle fatigue

M. Pise, D. Brands, G. Gebuhr, S. Anders, J. Schröder

Inverse Problem for Parameterizing Nonlinear Elastic Bending Behavior for Cable Simulation

T. Zhao, F. Schneider-Jung, J. Linn, R. Müller

Test Rig for Validating the Integrated Motion Measurement of Flexible Beams

M. Kohl, B. Györfi, J. F. Wagner

Simultaneous solution of implicitly defined curved, linear Timoshenko beams in two-dimensional bulk domains

M. W. Kaiser, T.-P. Fries

A direct peridynamic-type beam theory

K. Naumenko, Z. Yang

A variational approach to inelastic Cosserat rods in the plane

F. Schneider-Jung, D. Manfredo, V. Dörlich, M. Arnold, J. Linn

Numerical detection of suppression of quasi-periodic solutions

A. Seifert, H. Hetzler

SBFEM with perturbation method for solving the Reynolds equation

S. Pfeil, C. Song, E. Woschke

Shape optimization for MEMS gyroscopes

D. Schiwietz, M. Hörsting, P. Degenfeld-Schonburg, M. Wenzel

Modeling of oscillating piezoelectric actuators with cracks

S. Riedel, S. Kapelke, A. Fidlin

Damage-Plasticity Models at Finite Strains: Gradient-Enhancements, Calibration and Numerics

J. Friedlein, P. Steinmann, J. Mergheim

Quantification of the effect of uncertainty of material parameters on damage initiation in finite strain elastoplasticity

M. Böddecker, M. G. R. Faes, A. Menzel, M. A. Valdebenito

Modeling and identifying yield stress and Taylor-Quinney factor using a thermodynamic consistent constitutive theory and infrared thermography measurements

N. Lalovic, A. Dyck, A. Kauffmann, M. Heilmaier, T. Böhlke

An experimental and numerical benchmark: Evolution of forming induced residual stresses under cyclic loading

T. Schneider, M. Kästner

Modelling cyclic behavior of high-temperature steels: a two-time-scale approach

K. Knape, H. Altenbach, K. Naumenko

Framework for an electro-chemo-mechanical multi-component multi-phase-field corrosion model

J. Dittmann, S. Wulfinghoff

A combined explicit-implicit approach for robust finite cell simulations of phase field fracture

S. F. Hosseini, M. Gorji, R. Sartorti, L. Radtke, A. Düster

A Finite Element Approach to Multiphysical Problems in Poroelasticity

P. Reiff, P. Betsch

Dual-phase field models for immiscible fluid flow through fractured unsaturated porous media

S. Peters, Y. Heider, B. Markert

Non-intrusive inference of digital twins from conjugate, multiphase, porous media models to enable autonomous processes

M. Kannapinn, M. Schäfer, O. Weeger

Machine learning for the forward and inverse homogenization of cellular materials

D. M. Kochmann, L. Zheng, J.-H. Bastek, S. Kumar

From microgeometry to macroscopic modeling of porous materials enhanced by deep neural networks

Y. Heider, F. Aldakheel

A Machine Learning Approach for a Statistical Homogenization Method for Elastic Two-phase Materials

L. Schmollack, S. Klinge

Multiscale modeling of anisotropic finite strain elasticity with physics-augmented neural networks and generalized structure tensors

K. Kalina, J. Brummund, W. Sun, M. Kästner

Surrogate elements for nonlinear microstructures using physics-enhanced machine learning

W. Li, O. Weeger

Numerical studies in compressible thermal convection flows

J. Panickacheril John, J. Schumacher

Numerical Study on the Effects of Transient Pressure Gradients on Isothermal and Heated Pipe Flows

S. R. G. Polasanapalli, M. Klein, H. Schmidt

Stochastic modeling and theoretical analysis of heated concentric coaxial pipes at low Prandtl number

P.-Y. Tsai, H. Schmidt, M. Klein

Measurement of active grid generated turbulence

N. Szaszák, P. Bencs

Integrated approach for automated structural health monitoring of steel pipes through long-range ultrasonic testing and machine learning

G. Kapoor, B. Boll, R. Wasif, A. García, I. Pinson, C. Abarkane, S. Akram, D. Hoeche, C. Feiler, M. Zheludkevich

Optimizing Structural Health Monitoring Systems: A 2D Numerical Investigation on Impedance Matching for FML with Integrated Sensors

M. Rottmann, C. Mangalath, W. E. Weber

Analysis of wave scattering at the common interface of piezoelectric media half-spaces under surface/interface elasticity theory

A. Nath, S. Dhua

Surface effects on wave propagation in piezoelectric-piezomagnetic bilayer loosely bonded thin plates using nonlocal theory of elasticity

S. Mondal, S. Dhua

The Anisotropic Cahn–Hilliard Equation: Regularity Theory and Strict Separation Properties

J. Wittmann, H. Garcke, P. Knopf

Mathematical analysis of phase separation on evolving surfaces

D. Caetano, C. M. Elliott, M. Grasselli, A. Poiatti

On a convective Cahn-Hilliard system with dynamic boundary conditions

J. Stange, P. Knopf

Existence of weak solutions to a Cahn-Hilliard-Biot system

H. Abels, H. Garcke, J. Haselböck

Curvature-driven pattern formation in Biomembranes

A. Pešić

Nonlocal-to-Local Convergence for a Diffuse Interface Model for Two Phase Flow with Matched Densities

C. Hurm, H. Abels, P. Knopf, A. Poiatti

Dynamical and neural network approaches to downscaling of noisy and partial observations

O. Knio

Bifurcation diagrams of PDEs with parametric uncertainty

C. Kuehn, C. Piazzola, E. Ullmann

Koopman Mode Decomposition of a system with uncertain parameters

S. Gießler, C. Proppe

Sensitivity Analysis for Bifurcations in Random Ordinary Differential Equations

K. Lux-Gottschalk, P. Ashwin, R. Wood, C. Kuehn

On finite dimensional noise and finite dimensional models in uncertainty quantification

H.-J. Starkloff

Application of a Projection type method on Shape and Topology Optimization Problem concerning Additive Manufacturing

M. Urmann, L. Blank

Mesh-independent topology optimisation in the $H^1$ Sobolev space

M. Habera, J. Hale, J. Neumann

Convergence of a steepest descent algorithm in shape optimisation using W1,∞ functions

K. Deckelnick, P. Herbert, M. Hinze

A differential geometric point of view on shape optimization

L. Pryymak, K. Welker

Geometry-based Solutions to Multivariate Minimization Problems

S. Hütter, T. Halle

A set-valued stochastic approximation analysis of two-timescale actor-critic reinforcement learning with non-linear function approximation and clipped gradients

A. Redder, E. Kayacan

Divergence-conforming methods for transient double-diffusive flows

R. Bürger, A. Khan, P. Méndez, R. Ruiz-Baier

Structure preserving variational approximation of dynamic poroelasticity in first-order form

M. Bause, M. Anselmann, N. Margenberg, P. Shamko

Structure-Preserving Numerical Methods for Nonlinear Dispersive Wave Equations

J. Lampert, H. Ranocha

Structure-Preserving Time Discretization of Port-Hamiltonian Systems via Discrete Gradient Pairs

P. Schulze

Structure-preserving numerical methods for Fokker-Planck equations

H. Bartel, H. Ranocha

On Stabilizing Model Predictive Control for Generalized Nash Equilibrium Problems

F. Hante, M. Schmidt, A. Topalovic

Stabilizability of RHC for linear nonautonomous parabolic equations under uncertainty

B. Azmi, L. Herrmann, K. Kunisch

Feedback stabilization of parabolic equations. State estimation errors and model disturbances.

S. S. Rodrigues

Convergence result of smooth approximations of feedback laws to optimal control problems with non-differentiable value function

D. M. Vásquez-Varas, K. Kunisch

Feedback control of parameter-dependent linear systems

P. A. Guth, K. Kunisch, S. S. Rodrigues

Data-based methods for control: Why and how to incorporate machine learning

K. Bieker

High Gain Observer Design for Nonlinear Systems using Machine Learning

J. Fiedler, D. Gerbet, K. Röbenack

Partial observations, coarse graining and equivariance in Koopman operator theory for large-scale dynamical systems

S. Peitz, H. Harder, F. Nüske, F. Philipp, M. Schaller, K. Worthmann

Online learning with joint state and model estimation

R.-S. Götte, J. Timmermann

Adaptive Data-Driven Models in Port-Hamiltonian Form for Control Design

A. Junker, J. Timmermann, A. Trächtler

Algorithmic regularization in asymmetric overparameterized matrix sensing

M. Soltanolkotabi, D. Stöger, C. Xie

Unraveling Acoustic Signal Patterns in Fisheries Through DINO-Based Self-Supervised Learning

A. Pala, A. Oleynik, K. Malde, N. O. Handegard

Comparing the Performance of Beamformer Algorithms in Estimating Orientations of Neural Sources

Y. Buschermöhle, M. B. Höltershinken, T. Erdbrügger, J.-O. Radecke, A. Sprenger, T. Schneider, R. Lencer, J. Gross, C. Wolters

GPU Acceleration of a General Purpose Finite Element Framework

U. Kaya, M. Liebchen, C. Lessig, T. Richter

Floating-point accuracy and symbolic spectral decomposition of 3x3 matrices

A. Zilian, M. Habera

Improving performance of the ICON-O ocean model using parallel spectral deferred corrections

P. Freese, L. Hoffmann, C. Kadow, P. Korn, F. Lapolli, Y.-S. Lu, D. Ruprecht, M. Witte

Low-rank Lyapunov ADI on the GPU

J. Schulze, J. Saak

Multilevel Block Partitioning for Solving Sylvester-like Matrix Equations

M. Köhler

Numerical realization of the Mortensen observer via a Hessian-augmented polynomial approximation of the value function

T. Breiten, K. Kunisch, J. Schröder

A Recursive Multilevel Algorithm for Deep Learning

I. Jacob, S. Ulbrich

Frank-Wolfe Algorithms for Abs-smooth functions

S. H. Tadinada, S. Pokutta, A. Walther

Iteratively Reweighted Least Squares Recovery on Tensor Networks

S. Kraemer

Variationally correct methods for model reduction of parameterized transport equations by neural networks

M. Bachmayr, W. Dahmen, M. Oster

On automated model discovery and a universal material subroutine

K. Linka, M. Peirlinck, H. Holthusen, J. A. Hurtado, E. Kuhl

Tensor-Based Approaches for Modeling and Simulation of Molecular Systems

P. Gelß

Symmetries and tensor train representation of electronic wave functions

S. Badreddine, E. Cancès, M.-S. Dupuy, L. Grigori

Numerical Experiment on changing tensor network topology in DMRG calculations for strongly correlated systems.

E. A. Boamah

Predicting the Full CI energy of large systems to chemical accuracy from restricted active space density matrix renormalization group calculations

G. Friesecke, G. Barcza, O. Legeza

Characterization of the behavior of slender, soft robots

L. Schindler, K. M. de Payrebrune, R. Seis

Real-time Models for Systems with Costly or Unknown Dynamics

D. Bestle, T. Bielitz

Multi-Criteria Hydraulic Turbine Optimization using a Genetic Algorithm and Trust-Region Postprocessing

T. Rentschler, M. B. Berkemeier, A. Tismer, S. Peitz, S. Fraas, S. Riedelbauch, W. Sextro

Exploring the Optimal Leg-Stiffness in a 2D Monoped

M. Raff, C. D. Remy

Simulation of Thermical and Dynamical Behavior of High-Precision Optical Systems

P. Eberhard, M. Kurcics

Using active learning and surrogate models in the inverse viscoelastic parameter identification of human brain tissue

J. Hinrichsen, C. Ferlay, N. Reiter, S. Budday

Modeling the porous properties of brain tissue

A. Greiner, E. Comellas, P. Steinmann, S. Budday

A constitutive relation for human brain tissue obtained using an inverse technique and the numerical study of existence of non-classical solutions

M. K. Das, K. Kannan

Construction of a Hyperelastic Potential for human brain tissue using an Inverse Method and its Finite Element Implementation to study 3D Boundary Value Problems

Y. K. Vaidya, K. Kannan

Coupling of neuronal excitation and mechanosensitive ion channel activation in the human brain

L. Werneck, M.-A. Keip, M. Ortiz

M-Integral and energy-release rates: A didactical account

R. Kienzler, A. T. Nguyen, Y. E. Pak

Lifetime prediction for cyclic material behavior -- Application to multiaxial fatigue

K. Langenfeld, R. Desmorat, P. Kurzeja, J. Mosler

Geometric and Constitutive Modeling of MgO-C Refractories Based on Recyclates for Thermo-Mechanical Simulations

J. V. Gopi, S. Roth, B. Kiefer

Analysis of damage and failure behavior of additively manufactured stainless steel 316L by biaxial experiments

S. Gerke, J. Diller, L. D. Pérez Cruz, J. Blankenhagen, M. Mensinger, M. Brünig

Lattice structures as an energy-absorbing component for impact loads

S. Bieler, K. Weinberg

Investigating Auxetic Elements to Enhance Energy Absorption in Flexible Structures: An Integrated Experimental and Numerical Approach

B. Pi Savall, S. M. Seyedpour, T. Ricken

Numerical and Experimental Modeling of the Mechanical Behavior of Syntactic Foam (lightweight aggregates - Aluminum 2024)

R. Sadeghpourhaji, M. Mohammadkhah, S. Klinge

Simulations of superelastic lattice materials manufactured by additive manufacturing using a hypoelastic material model

M. M. Schasching, O. Červinek, T. Munhowen, D. Koutný, H. E. Pettermann, M. Todt

Tuning the buckling behaviour of slender, material extrusion manufactured collinear stayed polymer lattices

Y. Ou, A. Köllner, C. Völlmecke

A robust finite strain isogeometric solid-beam element towards simulations of microlattice structured Li-ion battery electrodes

A. Shafqat, O. Weeger, B.-X. Xu

Design and application of inelastic Constitutive Artificial Neural Networks (iCANN)

H. Holthusen, L. Lamm, T. Brepols, S. Reese, E. Kuhl

Exploring the possibilities of physically enhanced neural networks in advanced material modeling

L. Maurer, S. Eisenträger, D. Juhre

How to incorporate physical information into ANNs by physics-based Rao-Blackwellization: Example of isotropic rubber elasticity

G.-L. Geuken, P. Kurzeja, J. Mosler

An expanded model for the evolution of olivine crystals

H. H. Haddenhorst, S. Chakraborty, K. Hackl

Identifying Fiber Orientation and Fiber Volume Fraction Distributions in a Commercial Paperboard for Computational Modelling

G. Kloppenburg, X. Li, A. Dinkelmann, H. Finckh, J. Neumann, J.-W. Simon

Modeling coupled damage processes in porous media across the scales

R. Bharali, F. Larsson, R. Jänicke

Numerically efficient solution methods in highly nonlinear variational thermoinelasticity

H. Goldbeck, S. Wulfinghoff

Implementation of a thermomechanically coupled constitutive model for single-crystalline SMA based on an Augmented Lagrangian formulation

P. Löps, S. Prüger, V. von Oertzen, B. Kiefer

Thermomechanically coupled finite element formulation for strain-induced crystallization

X. Tang, R. Poudel, M. Itskov, M. Jabareen, V. N. Khiêm

Thermomechanical analysis of strain recovery in shape memory alloys under variable non-isothermal conditions

S. Descher, P. Krooß, F. Ewald, D. Kuhl

Basic problems of steady vibrations in the coupled theory of thermoelastic nanomaterials with triple porosity

M. Svanadze

Revisiting Cohesive composite boxels with imperfect interfaces: Challenges and Limitations

S. Keshav, F. Fritzen, M. Kabel

Influence of grain boundaries on the overall diffusivity in polycrystalline solids

L. Scholz, Y. Ou, B. Grabowski, F. Fritzen

A computational homogenisation approach accounting for interfaces in electrical conductors

D. Güzel, T. Kaiser, A. Menzel

Single-species diffusion in particle-matrix composites using a dual-potential model from computational homogenization

D. Rollin, F. Larsson, K. Runesson, F. Ekre, R. Jänicke

Investigation of elastic and inelastic size effects in composites using micromorphic multiscale simulations

A. Malik, G. Hütter, M. Abendroth, B. Kiefer

Modeling and Simulation of Simultaneous Transport and Incompressible Flows on all Level Sets in a Bulk Domain

T.-P. Fries, M. W. Kaiser

Unstructured Finite-Volume Arbitrary Lagrangian / Eulerian Interface Tracking computational framework for incompressible two-phase flows with surfactants

M. Schwarzmeier, S. Raju, Z. Tukovic, M. Fricke, D. Bothe, T. Maric

hp-Adaptive Simulation of Compressible Two-Phase Flows with Phase Transition

P. Mossier, C.-D. Munz, A. D. Beck

Simultaneous experimental analysis of concentration and velocity fields in gravity-driven inclined liquid film flows over smooth and microstructured surfaces

J. Weigelt, G. Brösigke, J.-U. Repke

Capabilities and limitations of Smoothed Particle Hydrodynamics for the simulation of two-phase flow instabilities

R. Vallem, M. Klein, H. Schmidt

An investigation of wave characteristics in Peridynamic media using Nonlocal Helmholz decomposition

S. Dhua, S. Mondal

Impact of Surface/interface effect on the propagation of shear wave in a composite piezoelectric cylinder

A. Maji, S. Dhua

A case study on the damage detection of beams via the time reversal method

M. Huguet, A. Ture Savadkoohi, C.-H. Lamarque

Time-periodic flow past a body: Approximation by problems on bounded domains

T. Eiter

Rotating solutions to the incompressible Euler-Poisson equation with external particle

D. Alonso-Orán, B. Kepka, J. López-Velázquez

Quantitative Analysis for the Ill-Posedness of the Prandtl Equations

F. De Anna, J. Kortum, S. Scrobogna

Neural network based operator surrogates for elliptic PDEs

C. Marcati, C. Schwab, J. Zech

Adaptive multilevel Neural Networks for parametric PDEs with error control

M. Eigel, J. Schütte

Adaptive sparse grid methods with kink detection for uncertainty quantification in gas networks

H. Wilka, J. Lang

Application of Isogeometric Analysis for Interval Analysis

N. Manque, J. Liedmann, F.-J. Barthold, M. Valdebenito, M. Faes

Unlocking Possibilities: Quantifying Imprecise Probabilities with Possibility Theory

T. Könecke, M. Hanss

Using a Quadratic Constrained Active Signature Method to Solve Nonsmooth Retail Portfolio Maximization Problems

T. Kreimeier, A. Kannan, A. Walther

Towards a practical conjugate gradients method for semismooth problems

E. Bergmann, F. Bethke, A. Walther

About Solving Complementarity Problems by Combining SCIP with a Piecewise Linear Solver

T. Kreimeier, M. Pfetsch, A. Schmidt, A. Walther

Numerical linear algebra for data assimilation

J. M. Tabeart, D. Palitta, J. W. Pearson

Balanced Truncation using Noisy Gramians for Bayesian Inverse Problems with Quadratic Nonlinearity

M. A. Freitag, J. König, E. Qian

Low-Rank Multi-Patch IGA

T.-C. Riemer, A. Bünger, M. Stoll

Real-world datasets ideality for photometric stereo under unknown lighting

E. Crabu, F. Pes, G. Rodriguez, G. Tanda

On the injectivity radius of the Stiefel manifold

J. Stoye, R. Zimmermann

On a Hybridized Domain Decomposition Formulation

K. Schmidt, T. Seibel

Matrix-free algorithms for finite element solvers in nearly incompressible hyperelasticity

R. Schussnig, M. Kronbichler

Comparison between block preconditioner and monolithic preconditioner for iterative solution of coupled multi-field problems from generalized continuum models

N. Alkmim, P. Gamnitzer, G. Hofstetter

Differentiability Matching and Z-Score Normalization in Piecewise Approximated Physics Informed Neural Networks for Solving PDEs

S. Rout, W. Kong

Relaxation based methods for the coupling of nonconservative hyperbolic systems

N. Kolbe, M. Herty, S. Müller

Shape optimization for Maxwell's equations

P. König

Shape Optimization by Constrained First-Order System Least Mean Approximation

G. Starke

Eigenvalue Optimization for Elastic Structures with a Phase Field approach

H. Garcke, P. Hüttl, C. Kahle, P. Knopf

Eigenvalue optimization with respect to shape-variation in electromagnetic cavities

C. Herter, S. Schöps, W. Wollner

Computing Multiple Local Minimizers of Topology Optimization Problems and Application for Hydrogen Electrolysis Cell Design

L. N. Baeck, S. Blauth, C. Leithäuser, R. Pinnau, K. Sturm

Analysis of an optimization problem for a piezoelectric energy harvester

B. Kaltenbacher, P. Krejci

Learning-based robust funnel MPC

T. Berger, D. Dennstädt, L. Lanza, K. Worthmann

Safe data-driven power grid synchronization

L. Lanza, P. Schmitz

The tangential AAA algorithm for learning MIMO-DAE dynamical systems from frequency-domain data

P. Benner, I. V. Gosea, J. Heiland, J. Saak

Unveiling the Promise of Event Cameras for Underwater Robotics Localization for Agile Navigation

O. Alvarez-Tunon, T. L. Alff, N. Bauschmann, A. Amer, H. Pham, D. A. Duecker, R. Seifried, E. Kayacan

Possibilistic Robot Localization Using Visual Landmarks

T. Könecke, H. Ebel, M. Hanss

Reversible methods in deep learning

S. Maslovskaya, S. Ober-Blöbaum, C. Offen, P. Singh, B. Wembe

Sparsity-Inspired Regularization for Image Reconstruction

S. Neumayer

Analyzing Concrete Pavement Damage Progression Using Image Dataset Techniques

H. Garita-Duran, M. Kaliske

Neural Galerkin schemes that can preserve Hamiltonians and other quantities

P. Schwerdtner, P. Schulze, B. Peherstorfer, J. Berman

Deep Learning for Structure-Preserving Universal Stable Koopman-Inspired Embeddings for Nonlinear Canonical Hamiltonian Dynamics

P. Goyal, S. Yıldız, P. Benner

Reduced basis surrogates for quantum spin systems based on tensor networks

P. Brehmer, M. F. Herbst, S. Wessel, M. Rizzi, B. Stamm

Numerical simulation of the Gross--Pitaevskii equation via vortex-tracking

T. Carvalho Corso, G. Kemlin, C. Melcher, B. Stamm

Using a posteriori error estimators to construct low-cost solution strategies for the Gross-Pitaevskii equation

M. Hassan, Y. Maday, Y. Wang

Multimodal 3D Reconstruction of Icy Surfaces for Robotic Applications: A Dataset and Analysis

A. Kaastrup-Hansen, H. X. Pham, E. Kayacan

Imitation learning for graph search algorithms and super-smooth spline in navigation of mobile robots: a case study on Turtlebot

A. Oveisi, A. Nath, B. Sülecik, A. K. Pal, T. Nestorović

Effectiveness of lightweight neural network in imitating model predictive controllers in robotics

A. K. Pal, A. Oveisi, T. Nestorović

Computer Simulation of Damage, Fiber Realignment, Growth, and Smooth Muscle Activation in Arteries in Health and Disease

D. Balzani

Correlative analysis of highly resolved AAA wall composition and strain in mice

A. Hegner, H. L. Cebull, A. J. Gámez, C. Blase, C. J. Goergen, A. Wittek

Fast and Reliable Reduced-Order Models for Cardiac Electrophysiology

S. Chellappa, B. Cansiz, L. Feng, P. Benner, M. Kaliske

Towards Integral Validation Strategies of Active Cardiac Contraction Models

D. Ogiermann, L. E. Perotti, D. Balzani

A monolithic approach to the phase-field modeling of brittle fracture using the scaled boundary finite element method

A. K. Pasupuleti, R. Assaf, C. Birk, S. Natarajan, H. Gravenkamp

Acceleration of immersed computations of brittle phase-field fracture utilizing moment fitting schemes

M. Gorji, S. F. Hosseini, R. Sartorti, L. Radtke, A. Düster

Model-based analysis of surface roughness on fatigue processes

S. Yan, A. Jawaid, E. Kerscher, J. Seewig, R. Müller

Phase-field damage models for brutal crack growth: An adaptive time-discretization method

F. Rörentrop, J. Mosler

Efficient phase-field models for ductile fatigue fracture

M. Kalina, M. Kästner

An eXtended Phase-Field Method for 2D Simulations of Fatigue Fracture Processes

C. Krüger, V. Curoșu, S. Loehnert

Physics-based machine learning model for the manufacturing of thermoplastic composites

A. Hürkamp

Artificial neural networks for structural damage detection and localization

S. Freitag, A. Volovikova

Advanced discretization techniques for hyperelastic physics-augmented neural networks

M. Franke, D. K. Klein, O. Weeger, P. Betsch

Physics-Informed Neural Networks for Material Model Calibration

D. Anton, H. Wessels, A. Henkes, U. Römer

Advanced Parameter Identification for Structural Steel Modeling: Integrating Multiple Load Protocols with Convolutional Neural Networks

O. Altay, D. Lignos

Physics informed neural networks in structural dynamics

V. Polydoras, S. B. Tandale, M. Stoffel

Mechanical data acquisition for microgels

V. N. Khiêm, A. Choudha, M. Itskov

Remarks on parameter identification using finite elements and full-field data

S. Hartmann, U. Römer, H. Wessels, J.-A. Tröger

Process simulation for thermal powder bed fusion additively manufactured glasses based on the Hamilton principle using Neigbor Element Methode (NEM)

T. Rudolf, M. Soleimani, T. Bode, P. Junker

One-point integration for T2 elements in viscoelasticity

Y. Choi, T. Bode, P. Junker

Topology optimization for precipitation hardening in ferroelectric material

M. Bohnen, R. Müller

On the effects of coupling in a thermo-chemo-mechanically model

J. Gisy, A. Dyck, T. Böhlke

Thermo- and chemo-elastic beam modeling and simulation with isogeometric collocation methods

J. C. Alzate Cobo, O. Weeger

Hygro-thermo-mechanical modelling of frozen ground and shotcrete interaction during tunneling excavation

R. J. Williams Moises, G. Meschke

Coupled chemo-electro-mechanical model for galvanic corrosion in clinched components

S. Harzheim, C. Chen, M. Hofmann, T. Wallmersperger

Implementation of a Finite-Element Framework Coupling Chemo-Mechanics and the Non-Local Gurson-Tvergaard-Needleman Model

S. A. Patil, S. Prüger, S. Roth, A. Seupel, B. Kiefer

Thermo-mechanically coupled Nonuniform Transformation Field Analysis of heterogeneous solids

F. Fritzen, J. Herb, S. Sharba

Mesh- and model adaptivity for NTFA and full-field elasto-plastic homogenization based on downwind and upwind approximations

A. Tchomgue Simeu, R. Mahnken

A hyperelastic-plastic mean-field-method at large deformations with damage for CFRP

Y. Zhan, I. Caylak, R. Mahnken

Parameterized hyperelastic material modeling and multiscale topology optimization with physics-augmented neural network constitutive models

O. Weeger, D. K. Klein, F. J. Roth, F. Püsch, K. K. Maute

Nonlinear electro-elastic finite element analysis with neural network constitutive models

D. K. Klein, R. Ortigosa, J. Martínez-Frutos, O. Weeger

Mathematical analysis of modified level-set equations

K. Soga, D. Bothe, M. Fricke

Two-Phase Flow Simulations in a Space-Time Framework for Injection Molding Applications

B. Ferrer Fabón, M. Behr

Viscous Two Layer Gravity Driven Flows

W. F Ellermeier

On the kinematic transport of sectional curvatures for a moving hypersurface

M. Fricke, M. Köhne, A. Vučković, D. Bothe

Modeling and optimization of optical resonances.

I. Karabash

Parameter-asymptotic behavior of integro-differential models of nonlinear acoustics

M. Meliani

Large Data Solutions to 1-D Hyperbolic Systems, Ill-Posedness, and Convex Integration

S. G. Krupa, L. Székelyhidi

Self-similar behaviour for Boltzmann-type equations

S. Throm

Bifurcation and Asymptotics of Cubically Nonlinear Transverse Magnetic Surface Plasmon Polaritons

R. He

Consensus-Based Rare Event Estimation

E. Ullmann

Computing upper probabilities of failure using optimization algorithms together with importance sampling.

T. Fetz, M. Oberguggenberger

Probabilistic microstructural modelling of the failure initiation process in cast iron

C. Beckmann, B. Rohrmüller, M. Schober, J. Tlatlik, I. Varfolomeev, J. Hohe

Less interaction with forward models in Langevin dynamics: Enrichment and Homotopy

M. Eigel, R. Gruhlke, D. Sommer

Modelling Distributions with Wasserstein Proximal methods and Low-Rank Tensor Decompositions

V. Aksenov, M. Eigel

Riemannian optimization on the symplectic Stiefel manifold

B. Gao, N. T. Son, T. Stykel

Optimization of Approximate Maps for Linear Systems Arising in Discretized PDEs

R. Islam, A. Carr, C. Jacobs

Recycling of Krylov subspaces in the simulation of nonlinear dynamic systems

L. Stellmach, S. Nitzschke, E. Woschke

Struture preserving approximations to Cayley transforms

A. Frommer, M. Diab, K. Kahl

Reorthogonalized Pythagorean variants of block classical Gram Schmidt

E. Carson, K. Lund, E. Oktay

A posteriori error estimates for nonconforming discretizations of singularly perturbed biharmonic operators

D. Gallistl, S. Tian

A posteriori error estimates for numerical approximations of the Keller-Segel system

J. Giesselmann, N. Kolbe, K. Kwon

A-posteriori error estimates for systems of hyperbolic conservation laws

J. Giesselmann, A. Sikstel

A Posteriori Error Estimation and Adaptivity for Temporal Multiscale Problems

L. Lautsch, T. Richter

Goal oriented error estimation for space-time adaptivity in phase-field fracture

V. Kosin, A. Fau, F. Hild, T. Wick

Numerical Analysis for Dirichlet Optimal Control Problems on Convex Polyhedral Domains

B. Vexler, J. Pfefferer

Numerical analysis of optimal control problem along curves in three dimensions.

D. Leykekhman, B. Vexler

Error Estimates for Optimal Control of the Instationary Navier-Stokes Equations Subject to State Constraints

B. Vexler, J. Wagner

Identification of the basal drag parameter in ice sheet models using L-curves

L.-S. Höyns, T. Kleiner, A. Rademacher, M. Rückamp, M. Wolovick, A. Humbert

Parameter identification of ice rheology and bottom friction for glaciers

N. Schmidt

Funnel MPC for nonlinear systems with arbitrary relative degree

T. Berger, D. Dennstädt

Model complexity optimization of equivalent dynamical linearization data models used in model-free adaptive control based on bias/variance trade-off

S. Salighe, D. Söffker

Systematic Parameter Study on Joint Level Impedance Control - Towards a Variable Impedance Control Scheme for Legged Robots

A. Pérez Paz, A. Kist, D. Rixen

Dual Quaternion parametrization of a Sliding Mode Control with Artificial Potential Functions

A. Stankovic, W. H. Müller

Design of Two Coupled Fuzzy Controllers for a Planar Direct Internal Reforming Solid Oxide Fuel Cell

T. Zhai, D. Bestle

A two-step order reduction approach of incompressible Navier-Stokes equations for H-infinity robust nonlinear controller design

J. Heiland, A. Das

A spectral inclusion property of essential spectrum of operator pencils

M. Wilson, C. Trunk, K. Hassen

Spectrum of the Maxwell Equations for a Flat Interface between Homogeneous Dispersive Media

T. Dohnal, M. Brown, M. Plum, I. Wood

GAN Enables Outlier Detection and Property Monitoring for Additive Manufacturing of Complex Structures

A. Henkes, L. Herrmann, H. Wessels, S. Kollmannsberger

Interconnection of port-Hamiltonian systems with port-Hamiltonian Neural Networks

T. Peters

On minimizing the training set fill distance in machine learning regression

P. Climaco, J. Garcke

Driving on a racetrack with a hybrid reinforcement learning approach

S. Gottschalk

Learning effective dynamics via kernel-based approximation of Koopman generator

V. Nateghi, F. Nüske

Active, Multi-Fidelity Learning for Efficient Molecular Machine Learning

P. Zaspel

Artificial Intelligence based detection of local spots in network materials prone to mechanical failure.

B. Bachhav, Z. Wu, B. Markert, F. Bamer

Coupling continuum and high fidelity models with multilevel on-the-fly sparse grids

T. Hülser, S. Matera

Dynamics and control of aerial manipulation

M. Beitelschmidt

Conquering the quantum world: old problems and new challenges for the applied mathematics community

E. Cancès

Optimisation of the hammer throw using parameterised synthetic motion kinematics in a multi-body system (MBS)

F. Schmidtchen, C. Daniel, S. Tiedemann, E. Woschke

Development of a kinematic model for a free kinematic forming process to compute the tool trajectory

V. Ekanayaka, A. Hürkamp, K. Dröder

Analysis of dynamic absorption system with a nonlinear damper described by a fractional-order model

N. Nešić, J. Simonović, T. Nestorović

Nonlinear dynamics of group rolling of bodies between concentric circle paths

K. Hedrih

Immersed boundary approach for vascularized tissues

C. Belponer, A. Caiazzo, L. Heltai, L. O. Müller

Generation of organ-scale synthetic vasculature using mathematical optimization

E. Jessen, M. C. Steinbach, D. Schillinger

A multi-compartment perfusion model of blood flow through deformed hierarchical vessel networks

J. Hohl, A. Ebrahem, E. Jessen, D. Schillinger

Coupling of a perfusion model to a poroelastic-growth model for modeling liver tissue regrowth

A. Ebrahem, E. Jessen, J. Hohl, D. Schillinger

Towards multi-scale model selection for rare data applications in life sciences

C. Reisch, S. Nickel, H.-M. Tautenhahn

Multiphase Modeling and Simulation of Function-Perfusion Processes in the Human Liver on Different Scales

L. Lambers, S. Gerhäusser, L. Mandl, T. Ricken

Limitations of finite interface width in phase field simulations and solutions by the example of quasi-brittle damage evolution

P. Kurzeja, K. Langenfeld, J. Mosler

On the influence of a nonlinear viscosity in a viscoelastic phase field model for fracture in ice

R. Sondershaus, A. Humbert, R. Müller

An Enriched Phase-Field Approach to Fracture: Transformed Phase-Field Ansatz (Part 1)

V. Curoșu, C. Krüger, S. Löhnert

An Enriched Phase-Field Approach to Fracture: Enrichment of the Displacement Field (Part 2)

V. Curoșu, C. Krüger, S. Löhnert

Prescribing traction-separation-laws to phase-field modelling of cohesive fracture

H. Lammen, J. Mosler

Simulation of viscoplastic structures under material uncertainties using time-separated stochastic mechanics

H. Geisler, P. Junker

Numerical analysis of the stress-based formulation of linear elasticity

A. Sky, A. Zilian

Variational three-field reduced order modeling for nearly incompressible materials

M. B. Shamim, S. Wulfinghoff

Mitigation Techniques for Volumetric Locking in the Implicit Material Point Method (MPM)

J. Meyer, M. Kaliske

Stabilization-free Virtual Element Method for 3D Hyperelastic Applications

B.-B. Xu, P. Wriggers

Mathematical Foundation of the Master-Slave Elimination for Arbitrary Nonlinear Multi-Point Constraints

J. Boungard, J. Wackerfuß, S. Ortleb

An efficient implementation of a micromorphic gradient extended, rate-independent single crystal plasticity model based on an Augmented Lagrangian formulation

S. Prüger, B. Kiefer

Barrier parameter update strategies for interior-point methods in single crystal plasticity

F. Steinmetz, L. Scheunemann

On discrete conservation of constraints in microstructure evolution

T. Bode, M. Soleimani, C. Erdogan, P. Wriggers, P. Junker

On the adaptive solution of phase-field problems with A-stable explicit last-stage diagonally implicit Runge-Kutta (ELDIRK) methods

H. Westermann, R. Mahnken

Latent heat in a thermomechanical theory for inclusion growth prediction via the multiphase-field method

A. Prahs, M. Reder, D. Schneider, B. Nestler

Domain wall dynamics in cubic magnetostrictive materials subject to Rashba effect and nonlinear dissipation

S. Maity, S. Dolui, S. Dwivedi, G. Consolo

Finite element based micromagnetic simulations of heterogeneous microstructres

M. Reichel, J. Schröder

Fully-Coupled Finite Element Implementation of a Constitutive Model for Magnetic Shape Memory Alloys

A. B. Jeeja, O. El Khatib, B. Kiefer

Effect of nonlinear viscous dissipation on magnetic domain wall motion in transversely isotropic hexagonal magnetostrictive materials

S. Maity

Analytical and numerical investigations of Maxwell-stress-induced higher-order singularities in cracked dielectrics and piezoelectrics

L. Behlen, F. Nickel, D. Wallenta, A. Ricoeur

Impact of inertial and nonlinear damping effects on the strain-induced domain wall motion in bilayer composite structure

S. Dolui, S. Dwivedi

A linear algebra perspective on FFT-accelerated finite element solvers for periodic homogenization

M. Ladecký, I. Pultarová, J. Zeman

FFT-based computational micromechanics with essential boundary conditions

L. Risthaus, M. Schneider

Fourier vs. Radon approach to computational homogenization

L. Jabs, M. Schneider

Multiscale(FE-FFT) approach to topology optimization using phase-field methods to generate intentionally designed porous structures

B. Yaraguntappa, A. Krischok, M.-A. Keip

FE-DeepONet: A hybrid solver based on physics-informed deep operator networks for multiscale simulations

H. Eivazi, M. Alikhani, J.-A. Tröger, S. Wittek, S. Hartmann, A. Rausch

Parametric finite element approximation of two-phase Navier--Stokes flow with viscoelasticity

H. Garcke, R. Nürnberg, D. Trautwein

An unstructured geometrical unsplit VOF method for viscoelastic two-phase flows

M. Niethammer, M. H. Asghar, T. Maric, D. Bothe

Phase-field modeling and computation of mixture flows

M. ten Eikelder, K. van der Zee, D. Schillinger

Bridging the scales in capillary rise dynamics with complexity-reduced models

M. Fricke, S. Raju, E. A. Ouro-Koura, O. Kozymka, J. De Coninck, Z. Tukovic, T. Maric, D. Bothe

Analysis of a drift-diffusion model for perovskite solar cells

A. Glitzky

Analysis of a Soap Film Catenoid Driven by an Electrostatic Force

L. Schmitz

New results on global bifurcation of travelling periodic water waves

J. Weber

The two-phase periodic Stokes flow in the plane driven by surface tension and gravity

D. Böhme

Sketched and truncated Krylov methods for core linear algebra problems

M. Schweitzer

A new rational Krylov subspace based projection method for solving large-scale algebraic Riccati equations via low-rank approximations

H. Faßbender

Extreme solutions of algebraic Riccati inequalities

V. Mehrmann, H. Xu

Low-rank solution of restricted discrete-time Gramians

P. Kürschner

Two Discretisations of the Time-Dependent Bingham Problem

C. Carstensen, M. Schedensack

Time integration in spectral methods for reaction diffusion equations

R. Pulch

Time discretisation of parabolic problems on evolving domains by means of a Crank-Nicolson scheme and implicit extensions

S. Frei, M. K Singh

A Second-Order Iterative Time Integration Scheme for Linear Poroelasticity

M. Deiml, R. Altmann

A second order accurate in time positivity preserving scheme for a Chemotaxis system

C. Pervolianakis

Robust PDE Constrained Design Optimization of Electrical Machines with Isogeometric Analysis

T. Komann, S. Ulbrich

Riemannian shape optimization of thin shells using isogeometric analysis

R. Rosandi, B. Simeon

Shape optimization on Riemannian manifolds including nonsmoothness

T. Suchan, V. Schulz, K. Welker

A Trust-Region Method for p-Harmonic Shape Optimization

H. Wyschka, W. Wollner, T. Rung

Constrained Best Approximation of Symmetric Shape Tensors and its Role for the Determination of Shape Gradients

L. Hetzel, G. Starke

Shape Optimization of a Bipolar Plate using a Dimension Reduction Approach

S. Blauth, C. Leithäuser, C. O'Reilly, R. Pinnau

Boundary control of distributed-parameter systems: A solution-based approach

A. Irscheid

Control design for convection-reaction systems with storage effects and positive relative degree

J. Wurm, F. Woittennek

Open-Loop Control of Shallow Water Waves in a Tube with Moving Boundary in Material-Fixed Coordinates

L. Mayer, F. Woittennek

Trajectory tracking control based on computer vision of a two-way soft prototype actuated with SMA wires

A. I. Acevedo-Velazquez, Z. Wang, A. Winkler, N. Modler, K. Röbenack

Feedback semiglobal stabilization to trajectories for the Kuramoto–Sivashinsky equation

D. A. Seifu

Optimal Sobolev Regularity for Degenerate Equations of Porous Media Type

B. Gess, J. Sauer

Existence and Uniqueness of Solutions of the Koopman–von Neumann Equation on Bounded Domains

M. Stengl, P. Gelß, S. Klus, S. Pokutta

A Galerkin projection approach for general port-Hamiltonian descriptor systems

R. Morandin

Input-to-state stability for unnbounded bilinear feedback systems

R. Hosfeld, B. Jacob, F. Schwenninger, M. Tucsnak

Preconditioning the Kernel ANOVA SVM

M. Stoll

Transformers and Function Approximation: What Can We Learn About the Attention Scheme?

L. Thesing

On the invariance of Gaussian RKHS's under Koopman operators

F. Philipp, M. Schaller, K. Worthmann, S. Peitz, F. Nüske

Utilizing Machine Learning for Hydrogel Swelling Prediction

Y. Wang, A. Ehrenhofer, T. Wallmersperger

A Quasi Time-Reversible Grassmann extrapolation of density matrices for accelerating Born-Oppenheimer molecular dynamics

F. Pes, É. Polack, P. Mazzeo, G. Dusson, B. Stamm, F. Lipparini

A Posteriori Error Analysis for Kohn-Sham Equations with Convex Exchange-Correlation Functionals

R. A. Lainez Reyes

Applying a Well-Defined Energy Density for Machine-Learned Density Functionals

E. Polak, S. Vuckovic, H. Zhao

Moreau-Yosida Regularization in Density-Functional Theory

A. Laestadius

Dynamic fracture simulations with peridynamics and phase-field fracture

K. Weinberg

Digital Twins of electrical switching devices for over-current protection with application to AI- assisted lifetime prognosis

D. Suresh Singhal, A. Boyaci, A. Fidlin

Visual Feedback Control for Positioning Support of a Rotary Crane

Y. Kakuta, M. S. Paing, A. Farrage, K. Kudara, H. Takahashi, S. Sasai, H. Sakurai, M. Okubo, N. Uchiyama

A Spring-Mass Chain Multi-body Approach for Modeling Yarn Balloon Dynamics in Ring Spinning

Y. J. Perez-Delgado, M. Beitelschmidt, M. Hossain, A. Abdkader, C. Cherif, M. Baloochi, R. Hühne

Accelerating the design of the effective surface of pressing tools with probabilistic inverse modelling approaches

H. K. Hupfeld, Y. Teshima, S. S. Ali, M. Juraschek, K. Dröder, C. Herrmann, A. Hürkamp

Structural dynamics of a Scaled Trailer Model: Investigation of the Influence of Different Loading Variants

J. M. Volltrauer, F. Buck, H. Hetzler

Modeling of the phase transformation behavior in metastable austentic stainless steels

H. K. Thammineni, R. Denzer, R. Müller

Elasticity in phase-field crystal models of solidification

M. Punke, M. Salvalaglio

Micromechanical multi-scale simulation of the directionally-solidified Mo-Hf-B alloy

R. Nizinkovskyi, K. Naumenko, M. Krüger

Mesoscopic Structure Modeling of Flexible Macroporous Aerogels using Cluster-Cluster Aggregation

W. Xiong, R. Abdusalamov, M. Itskov

Double-surface plasticity for a micropolar continuum

A. Börger, R. Mahnken

Computational Modelling of Non-Woven Material Compression

C. Wan, Y. Heider, B. Markert

A hybrid approach for ferroelectric continua combining the finite element method and an efficient scale bridging concept

R. Wakili, L. Stephan, R. Andreas

Material modeling of ferroelectric solids in presence of flexoelectricity

S. Kozinov, K. Tannhäuser

Numerical detection of shaft misalignments using a sensor-integrating jaw coupling

J. D. M. Menning, A. Ewert, A. Prokopchuk, B. Schlecht, E.-F.M. Henke, T. Wallmersperger

Experimental characterization of acoustic damping materials

P. Marter, L. Radtke, S. Eisenträger, A. Düster, D. Juhre

An automatic simulation pipeline for coupled simulations of acoustic damping materials

L. Radtke, P. Marter, S. Eisenträger, D. Juhre, A. Düster

An approach simulating interacting solid, liquid and gas domains for dynamic seal applications

M. Graf, L. Tobias

Micromechanics of X-Ray Diffraction Stress Measurements

M. Krause, J. Gibmeier, T. Böhlke

Scale independent extension operators for manifold valued Sobolev maps on perforated domains

L. Happ, C. Gavioli, V. Pagliari

Application of upper bound rigid-block analysis method to porous solids

J. Hund, V. Kouznetsova, L. Alessandretti, T. Andriollo

On a multiscale formulation for rough boundaries

K. Schmidt, S. Pfaff

An adaptive stochastic Galerkin method based on multilevel expansions

M. Bachmayr, M. Eigel, H. Eisenmann, I. Voulis

On the Kolmogorov n-width of reachable sets of the bilinear Schrödinger equation

A. Zuyev, L. Feng, P. Benner

Well-posedness and exponential stability of a controlled dispersed flow tubular reactor model

Y. Yevgenieva, A. Zuyev, P. Benner

Towards checking BIBO stability for hyperbolic systems

A. A. Wierzba

A non-stiff Lie group integrator for highly flexible structures with large rotations

M. Arnold, D. Tumiotto

A RATTLE integrator for the simulation of unilaterally constrained mechanical systems

G. Capobianco, J. Breuling, S. Leyendecker

Case Study on Modeling Multibody Systems as Port-Hamiltonian Systems

R. Hochdahl, S. Drücker, R. Seifried

Structure-preserving time discretization of multibody systems with singular inertia matrix

P. L. Kinon, P. Betsch

Vibration analyses of a mandible

A. Vulović, B. Dimeski, T. Geroski, I. Saveljić, T. Nestorović, N. Filipović

Enhancing Leg Alignment in Adolescents: Exploring Optimal Positioning of Tension Band Implants for Guided Growth - A Finite Element Investigation

L. Hucke, S. Vincenti, J. Holder, S. van Drongelen, S. Braun, J. Schwer, A. Seitz, F. Stief, A. Huß, A. Gámez, A. Wittek

Application of the Neighbored Element Method on a Hamilton principle-based multi-species biofilm model

F. Klempt, M. Soleimani, P. Junker

Cell-preserving Scheme for Mechanobiological Research on Dedifferentiation of Chondrocytes

H. Lee, S. Tandale, H. Topol, M. Stoffel

A refined model for the coupled analysis of actice biological processes for meniscus tissue regeneration

H. S. Jäger, E. Grosjean, B. Simeon, C. Surulescu

Numerical investigations on three-dimensional metal cutting simulations within the Material Point Method employing the Johnson-Cook material law

M. Koßler, S. Maassen, R. Niekamp, J. Schröder

Simulation of coated particles breakage using Discrete Element and Bonded Particle Method

W. Safdar, S. Heinrich, A. Düster

Brittle fracture investigation in a coupled peridynamic and classical elasticity model

A. Pernatii, U. Gabbert, C. Willberg, J.-T. Hesse

Peridynamic computations of wave propagation and dynamic fracture

K. Partmann, K. Weinberg

Physics-based machine learning for computational fracture mechanics

F. Aldakheel, E. S. Elsayed, O. Weeger

Analytical considerations of the load-deflection behavior in fibers during a filament winding process

C. Steinweller, S. Hartmann

Computational Modeling of Concrete Composites with Short Shape Memory Alloys Fibers

A. Tabrizikahou, M. Kuczma

Torwards a holistic simulation framework for the response of a multilayered pavement structure subjected to realistic tire loading

M. May, A. Anantheswar, I. Wollny, M. Kaliske

Additive Manufacturing in Structural Mechanics: Tackling Sustainable Development Goals through Cooperative Labwork

C. Völlmecke, A. Dönitz, N. Panjalipoursangari, Y. Ou

Numerical Validation of an Innovative 3D Calculation Method of High-Rise Buildings under Consideration of Component and Soil Stiffness

M. Badr, H. W. Müllner

Experimental Validation of an Innovative Method for Minimization of Deformation Tolerances of Reinforced Concrete Ceilings

H. W. Müllner, S. Akyol, P. Hofer

How to Identify the hardening curve of PVDF films from tensile tests and simple shear tests for application in adhesive bondline modelling

R. Kilian, O. Völkerink, J. Steinmetz, C. Hühne

Thermoviscoelastic modeling and simulation of enthalpy relaxation in thermoplastic polymers

J. Keursten, S. Enders, T. Böhlke

Effects of Temperature and Humidity on the Interfacial Shear Strength of Carbon Fiber Reinforced Polyamide 6: Insights from Single Fiber Pull-Out Tests and Finite Element Analysis

N. Christ, J. Montesano, J. Hohe

Hydrothermal behavior of PA 6 reinforced with discontinuous long carbon fibers

L. Kehrer, B. Scheuring, J. Blarr, T. Böhlke

On the influence of the microstructure model on multiscale bone simulations

M. Blaszczyk, K. Hackl

Efficient and Accurate Numerical Simulation of Micromagnetic Problems Using Projection-Based Finite Elements and Optimization on Manifolds

A. Müller, M. Bischoff, M.-A. Keip

Dual Weighted Residual Error Estimation for a Stationary Coupled Fluid Flow Heat System

S. Beuchler, A. Demircan, B. Endtmayer, J. Lankeit, T. Wick

Thixoviscoplastic flow simulations based on Houska thixotropic and Bingham viscoplastic models

N. Begum, A. Ouazzi, S. Turek

Advanced PIV-based measurement method to determine fiber orientation in a transparent fresh concrete substitute liquid

T. Vaupel, S. Jacob, F. Gerland, T. Schomberg, O. Wünsch

Port-Hamiltonian Modeling and Stability Analysis for Coupled Network PDAEs describing Gas Networks

C. Tischendorf, J. Pade

Convergence of waveform relaxation for coupled DAEs describing circuits with generalized elements

J. Pade, I. Cortes Garcia, P. M. Kumbhar

Towards model-based feedback control of hydrogels 3D bioprinting

J.-H. Urrea-Quintero, T. Wick, H. Wessels

Macroscopic properties of solid oxide fuel cell electrodes via microstructure-based numerical homogenization

E. Langner, A. Makradi, S. Gouttebroze, S. Belouettar, T. Wallmersperger

Concepts for modeling the inelastic behavior of foam structures

M. Abendroth, A. Malik, B. Kiefer

Multiscale analysis of interlocking effects for polymer additive manufacturing on aluminum foam

F. Timmann, P.-L. Gronwald, A. Hürkamp, K. Dröder

FE^2 method to model plane and rod-like carbon-based nanostructures

J. Ochs, J. Wackerfuß

FE² simulation of low-cycle fatigue in metals

M. Zobel, G. Hütter

Modeling microstructural effects in scaffold mediated bone regeneration

P. Dondl, O. Suchan

Reduced Order Modelling in Fluid Mechanics: focus turbulence and compressibility

G. Rozza

Model-based deep reinforcement learning for flow control

A. Weiner, J. Geise

A volume-averaging and stochastic turbulence modeling framework for homogeneous roughness-induced drag in turbulent flows

J. A. Medina Méndez, A. Parra Lafuente, H. Schmidt

Distributed control of Rayleigh--Bénard convection using symmetry-exploiting deep reinforcement learning

V. Chidananda, S. Peitz

A new fast numerical method for the generalized Rosen-Zener model and its application to matrix exponential approximation

C. Bonhomme, N. Van Buggenhout, S. Pozza, S. Zahid

Adaptive rational Krylov methods for exponential Runge--Kutta integrators

K. Bergermann, M. Stoll

Mixed-precision Paterson--Stockmeyer method for evaluating matrix polynomials

X. Liu

The Fréchet derivative of the tensor t-function

K. Lund, M. Schweitzer

Trefftz-DG for Stokes problems

C. Lehrenfeld, P. L. Lederer, P. Stocker

Geometrically higher order unfitted space-time methods for PDEs on moving domains

F. Heimann, C. Lehrenfeld, J. Preuß

Analysis of a nonconformig finite element method for vector-valued Laplacians on the surface

C. Mehlmann

On H(Curl) shape functions

T. Haubold, S. Beuchler, J. Schöberl

Derivation and simulation of thermoelastic Kirchhoff plates

J. Alms

ON THE DYNAMICS OF BLOWUP-POINTS: AN INVERSE MATRIX MODELING APPROACH FOR ESTIMATIONS ON THE NONLINEAR BEHAVIOR OF THE INCOMPRESSIBLE 3D NAVIER-STOKES EQUATION

D. Shadmani

Structure-Preserving Interpolation of Quadratic-Bilinear Systems via Regular Multivariate Transfer Functions

P. Benner, S. Gugercin, S. W. R. Werner

Extending balanced truncation to general domains

A. Borghi, T. Breiten, S. Gugercin

Optimization-based model order reduction of port-Hamiltonian descriptor systems

P. Schwerdtner, T. Moser, V. Mehrmann, M. Voigt

Model reduction of descriptor systems with quadratic output functionals

J. Przybilla, I. Pontes Duff, P. Goyal, P. Benner

Model Order Reduction for switched Differential Algebraic Equations

M. Manucci, B. Unger

Removing Inconsistencies of Reduced Bases in Parametric Model Order Reduction by Matrix Interpolation

S. Schopper, G. Müller