Conference Agenda

A non-stiff Lie group integrator for highly flexible structures with large rotations

M. Arnold, D. Tumiotto

A RATTLE integrator for the simulation of unilaterally constrained mechanical systems

G. Capobianco, J. Breuling, S. Leyendecker

Case Study on Modeling Multibody Systems as Port-Hamiltonian Systems

R. Hochdahl, S. Drücker, R. Seifried

Structure-preserving time discretization of multibody systems with singular inertia matrix

P. L. Kinon, P. Betsch

Vibration analyses of a mandible

A. Vulović, B. Dimeski, T. Geroski, I. Saveljić, T. Nestorović, N. Filipović

Enhancing Leg Alignment in Adolescents: Exploring Optimal Positioning of Tension Band Implants for Guided Growth - A Finite Element Investigation

L. Hucke, S. Vincenti, J. Holder, S. van Drongelen, S. Braun, J. Schwer, A. Seitz, F. Stief, A. Huß, A. Gámez, A. Wittek

Application of the Neighbored Element Method on a Hamilton principle-based multi-species biofilm model

F. Klempt, M. Soleimani, P. Junker

Cell-preserving Scheme for Mechanobiological Research on Dedifferentiation of Chondrocytes

H. Lee, S. Tandale, H. Topol, M. Stoffel

A refined model for the coupled analysis of actice biological processes for meniscus tissue regeneration

H. S. Jäger, E. Grosjean, B. Simeon, C. Surulescu

Numerical investigations on three-dimensional metal cutting simulations within the Material Point Method employing the Johnson-Cook material law

M. Koßler, S. Maassen, R. Niekamp, J. Schröder

Simulation of coated particles breakage using Discrete Element and Bonded Particle Method

W. Safdar, S. Heinrich, A. Düster

Brittle fracture investigation in a coupled peridynamic and classical elasticity model

A. Pernatii, U. Gabbert, C. Willberg, J.-T. Hesse

Peridynamic computations of wave propagation and dynamic fracture

K. Partmann, K. Weinberg

Physics-based machine learning for computational fracture mechanics

F. Aldakheel, E. S. Elsayed, O. Weeger

Analytical considerations of the load-deflection behavior in fibers during a filament winding process

C. Steinweller, S. Hartmann

Computational Modeling of Concrete Composites with Short Shape Memory Alloys Fibers

A. Tabrizikahou, M. Kuczma

Torwards a holistic simulation framework for the response of a multilayered pavement structure subjected to realistic tire loading

M. May, A. Anantheswar, I. Wollny, M. Kaliske

Additive Manufacturing in Structural Mechanics: Tackling Sustainable Development Goals through Cooperative Labwork

C. Völlmecke, A. Dönitz, N. Panjalipoursangari, Y. Ou

Numerical Validation of an Innovative 3D Calculation Method of High-Rise Buildings under Consideration of Component and Soil Stiffness

M. Badr, H. W. Müllner

Experimental Validation of an Innovative Method for Minimization of Deformation Tolerances of Reinforced Concrete Ceilings

H. W. Müllner, S. Akyol, P. Hofer

How to Identify the hardening curve of PVDF films from tensile tests and simple shear tests for application in adhesive bondline modelling

R. Kilian, O. Völkerink, J. Steinmetz, C. Hühne

Thermoviscoelastic modeling and simulation of enthalpy relaxation in thermoplastic polymers

J. Keursten, S. Enders, T. Böhlke

Effects of Temperature and Humidity on the Interfacial Shear Strength of Carbon Fiber Reinforced Polyamide 6: Insights from Single Fiber Pull-Out Tests and Finite Element Analysis

N. Christ, J. Montesano, J. Hohe

Hydrothermal behavior of PA 6 reinforced with discontinuous long carbon fibers

L. Kehrer, B. Scheuring, J. Blarr, T. Böhlke

On the influence of the microstructure model on multiscale bone simulations

M. Blaszczyk, K. Hackl

Efficient and Accurate Numerical Simulation of Micromagnetic Problems Using Projection-Based Finite Elements and Optimization on Manifolds

A. Müller, M. Bischoff, M.-A. Keip

Dual Weighted Residual Error Estimation for a Stationary Coupled Fluid Flow Heat System

S. Beuchler, A. Demircan, B. Endtmayer, J. Lankeit, T. Wick

Thixoviscoplastic flow simulations based on Houska thixotropic and Bingham viscoplastic models

N. Begum, A. Ouazzi, S. Turek

Advanced PIV-based measurement method to determine fiber orientation in a transparent fresh concrete substitute liquid

T. Vaupel, S. Jacob, F. Gerland, T. Schomberg, O. Wünsch

Port-Hamiltonian Modeling and Stability Analysis for Coupled Network PDAEs describing Gas Networks

C. Tischendorf, J. Pade

Convergence of waveform relaxation for coupled DAEs describing circuits with generalized elements

J. Pade, I. Cortes Garcia, P. M. Kumbhar

Towards model-based feedback control of hydrogels 3D bioprinting

J.-H. Urrea-Quintero, T. Wick, H. Wessels

Macroscopic properties of solid oxide fuel cell electrodes via microstructure-based numerical homogenization

E. Langner, A. Makradi, S. Gouttebroze, S. Belouettar, T. Wallmersperger

Concepts for modeling the inelastic behavior of foam structures

M. Abendroth, A. Malik, B. Kiefer

Multiscale analysis of interlocking effects for polymer additive manufacturing on aluminum foam

F. Timmann, P.-L. Gronwald, A. Hürkamp, K. Dröder

FE^2 method to model plane and rod-like carbon-based nanostructures

J. Ochs, J. Wackerfuß

FE² simulation of low-cycle fatigue in metals

M. Zobel, G. Hütter

Modeling microstructural effects in scaffold mediated bone regeneration

P. Dondl, O. Suchan

Reduced Order Modelling in Fluid Mechanics: focus turbulence and compressibility

G. Rozza

Model-based deep reinforcement learning for flow control

A. Weiner, J. Geise

A volume-averaging and stochastic turbulence modeling framework for homogeneous roughness-induced drag in turbulent flows

J. A. Medina Méndez, A. Parra Lafuente, H. Schmidt

Distributed control of Rayleigh--Bénard convection using symmetry-exploiting deep reinforcement learning

V. Chidananda, S. Peitz

A new fast numerical method for the generalized Rosen-Zener model and its application to matrix exponential approximation

C. Bonhomme, N. Van Buggenhout, S. Pozza, S. Zahid

Adaptive rational Krylov methods for exponential Runge--Kutta integrators

K. Bergermann, M. Stoll

Mixed-precision Paterson--Stockmeyer method for evaluating matrix polynomials

X. Liu

The Fréchet derivative of the tensor t-function

K. Lund, M. Schweitzer

Trefftz-DG for Stokes problems

C. Lehrenfeld, P. L. Lederer, P. Stocker

Geometrically higher order unfitted space-time methods for PDEs on moving domains

F. Heimann, C. Lehrenfeld, J. Preuß

Analysis of a nonconformig finite element method for vector-valued Laplacians on the surface

C. Mehlmann

On H(Curl) shape functions

T. Haubold, S. Beuchler, J. Schöberl

Derivation and simulation of thermoelastic Kirchhoff plates

J. Alms

ON THE DYNAMICS OF BLOWUP-POINTS: AN INVERSE MATRIX MODELING APPROACH FOR ESTIMATIONS ON THE NONLINEAR BEHAVIOR OF THE INCOMPRESSIBLE 3D NAVIER-STOKES EQUATION

D. Shadmani

Structure-Preserving Interpolation of Quadratic-Bilinear Systems via Regular Multivariate Transfer Functions

P. Benner, S. Gugercin, S. W. R. Werner

Extending balanced truncation to general domains

A. Borghi, T. Breiten, S. Gugercin

Optimization-based model order reduction of port-Hamiltonian descriptor systems

P. Schwerdtner, T. Moser, V. Mehrmann, M. Voigt

Model reduction of descriptor systems with quadratic output functionals

J. Przybilla, I. Pontes Duff, P. Goyal, P. Benner

Model Order Reduction for switched Differential Algebraic Equations

M. Manucci, B. Unger

Removing Inconsistencies of Reduced Bases in Parametric Model Order Reduction by Matrix Interpolation

S. Schopper, G. Müller

Topological Design Problems and Massive Integer Optimization

S. Leyffer

Mixed-initiative engineering design

S. Elgeti