Conference Agenda

Utilising Closely Spaced Modes of Tower Structures for Damage Localisation using Multi-Objective Model Updating

J. Ragnitz, B. Hofmeister, C. Jonscher, C. Hübler, R. Rolfes

Uncertainty quantification for two-step model calibration using least-squares and Bayesian inference

J.-A. Tröger, U. Römer, S. Hartmann

Probabilistic parameter identification of a rate-dependent constitutive model for porcine stomach tissue

M. P. Wollner, C. S. Holzer, A. W. Caulk, G. A. Holzapfel

Aspects of parameter identification in thermoplasticity

L. Rose, A. Menzel

Optimization of the specimen geometry for one‑shot discovery of material models

S. Ghouli, M. Flaschel, S. Kumar, L. De Lorenzis

An extension of the Dynamic Regressor Extension and Mixing approach for real-time parameter estimation

A. Othmane

Multistage parameter identification of a finite-strain viscoelastic-viscoplastic material model for biobased thermosets

L. Laubert, S. Pfaller

Frequency domain analysis of viscoelastic elastomer blends considering interfacial transition zones

M. Ulrich, M. Petö, S. Eisenträger, D. Juhre

Experimental analysis of a beam with a 2D triangular substructure

N. Panjalipoursangari, A. Morozov, W. Müller, C. Völlmecke

Material Plasticity - Development of the material stiffness in fiber-reinforced materials with large plastic deformations

M. Weber, R. Glüge, H. Altenbach

Comparison of Pericardium Modeling Approaches for Mechanical Whole Heart Simulations

J. Krauß, T. Gerach, L. Stengel, C. Wieners, A. Loewe

Modeling and Simulation of Pharmaco-Mechanical FSI for an Enhanced Treatment of Cardiovascular Diseases - Part I: Modeling Aspects

S. Nurani Ramesh, K. Uhlmann, D. Balzani

Modeling and Simulation of Pharmaco-Mechanical FSI for an Enhanced Treatment of Cardiovascular Diseases - Part II: Numerical Methods, Software, and Results

L. Saßmannshausen, A. Klawonn, J. Knepper, A. Heinlein

SimLivA - A Data-Integrated, Continuum-Biomechanical Framework for In-Silico Staging of Ischemia-Reperfusion Injury During Liver Transplantation

L. Mandl, S. Gerhäusser, L. Lambers, U. Dahmen, M. König, H.-M. Tautenhahn, T. Ricken

Modelling material properties of composites using stochastic tensor approach

W. J. Schuttert, M. I. Abdul Rasheed, B. Rosić

Notes on the Schapery model to describe non-linear viscoelastic phenomena

M. A. Margalho de Barros, S. Govindjee, J. Schröder

Viscoelastic Constitutive Artificial Neural Networks (vCANNs) – a framework for data-driven anisotropic nonlinear finite viscoelasticity

K. Abdolazizi, K. Linka, C. Cyron

A thermodynamically consistent physics-informed neural network model for nanoparticle-filled epoxy nanocomposites with moisture content

B. Bahtiri, B. Arash, S. Scheffler, M. Jux, R. Rolfes

Constitutive artificial neural network for elasto-plastic material behavior

B. Boes, J.-W. Simon, H. Holthusen

Merging traditional and neural network material modeling

K. A. Meyer

On neural networks as propagators in data-driven inelasticity

M. Harnisch, T. Bartel, B. Schweizer, A. Menzel

Damage-Plasticity Models at Finite Strains: Gradient-Enhancements, Calibration and Numerics

J. Friedlein, P. Steinmann, J. Mergheim

Quantification of the effect of uncertainty of material parameters on damage initiation in finite strain elastoplasticity

M. Böddecker, M. G. R. Faes, A. Menzel, M. A. Valdebenito

Modeling and identifying yield stress and Taylor-Quinney factor using a thermodynamic consistent constitutive theory and infrared thermography measurements

N. Lalovic, A. Dyck, A. Kauffmann, M. Heilmaier, T. Böhlke

An experimental and numerical benchmark: Evolution of forming induced residual stresses under cyclic loading

T. Schneider, M. Kästner

Modelling cyclic behavior of high-temperature steels: a two-time-scale approach

K. Knape, H. Altenbach, K. Naumenko

Design and application of inelastic Constitutive Artificial Neural Networks (iCANN)

H. Holthusen, L. Lamm, T. Brepols, S. Reese, E. Kuhl

Exploring the possibilities of physically enhanced neural networks in advanced material modeling

L. Maurer, S. Eisenträger, D. Juhre

How to incorporate physical information into ANNs by physics-based Rao-Blackwellization: Example of isotropic rubber elasticity

G.-L. Geuken, P. Kurzeja, J. Mosler

An expanded model for the evolution of olivine crystals

H. H. Haddenhorst, S. Chakraborty, K. Hackl

Identifying Fiber Orientation and Fiber Volume Fraction Distributions in a Commercial Paperboard for Computational Modelling

G. Kloppenburg, X. Li, A. Dinkelmann, H. Finckh, J. Neumann, J.-W. Simon

Mechanical data acquisition for microgels

V. N. Khiêm, A. Choudha, M. Itskov

Remarks on parameter identification using finite elements and full-field data

S. Hartmann, U. Römer, H. Wessels, J.-A. Tröger

Process simulation for thermal powder bed fusion additively manufactured glasses based on the Hamilton principle using Neigbor Element Methode (NEM)

T. Rudolf, M. Soleimani, T. Bode, P. Junker

One-point integration for T2 elements in viscoelasticity

Y. Choi, T. Bode, P. Junker

Topology optimization for precipitation hardening in ferroelectric material

M. Bohnen, R. Müller

An efficient implementation of a micromorphic gradient extended, rate-independent single crystal plasticity model based on an Augmented Lagrangian formulation

S. Prüger, B. Kiefer

Barrier parameter update strategies for interior-point methods in single crystal plasticity

F. Steinmetz, L. Scheunemann

On discrete conservation of constraints in microstructure evolution

T. Bode, M. Soleimani, C. Erdogan, P. Wriggers, P. Junker

On the adaptive solution of phase-field problems with A-stable explicit last-stage diagonally implicit Runge-Kutta (ELDIRK) methods

H. Westermann, R. Mahnken

Latent heat in a thermomechanical theory for inclusion growth prediction via the multiphase-field method

A. Prahs, M. Reder, D. Schneider, B. Nestler

Modeling of the phase transformation behavior in metastable austentic stainless steels

H. K. Thammineni, R. Denzer, R. Müller

Elasticity in phase-field crystal models of solidification

M. Punke, M. Salvalaglio

Micromechanical multi-scale simulation of the directionally-solidified Mo-Hf-B alloy

R. Nizinkovskyi, K. Naumenko, M. Krüger

How to Identify the hardening curve of PVDF films from tensile tests and simple shear tests for application in adhesive bondline modelling

R. Kilian, O. Völkerink, J. Steinmetz, C. Hühne

Thermoviscoelastic modeling and simulation of enthalpy relaxation in thermoplastic polymers

J. Keursten, S. Enders, T. Böhlke

Effects of Temperature and Humidity on the Interfacial Shear Strength of Carbon Fiber Reinforced Polyamide 6: Insights from Single Fiber Pull-Out Tests and Finite Element Analysis

N. Christ, J. Montesano, J. Hohe

Hydrothermal behavior of PA 6 reinforced with discontinuous long carbon fibers

L. Kehrer, B. Scheuring, J. Blarr, T. Böhlke