Conference Agenda

On the spectrum of atmospheric motions

U. Schumann

A unified Nitsche approach for fluid-structure interactions and contact

S. Frei, E. Burman, M. A Fernández

Mixed-Dimensional Immersed Finite Element Approach for the Interaction of Submerged Fibers with Fluid Flow

N. Hagmeyer, M. Mayr, A. Popp

Comparing Arterial Wall Models for the Curved Tube Fluid-Structure Interaction Benchmark

A. Heinlein, A. Klawonn, O. Rheinbach

Simulating sea ice drift in the Southern Ocean using the LSFEM.

C. Nisters, J. Schröder

Load balancing for dynamic contact problems on distributed memory architectures

M. Mayr, A. Popp

Purely hyperbolic self-gravitating flow simulations in Julia

M. Schlottke-Lakemper, A. R. Winters, H. Ranocha, G. J. Gassner

Low rank approaches for the analysis of biomedical data from pre to post processing

F. Esposito

Functional Tucker approximation using Chebyshev interpolation

S. Dolgov, D. Kressner, C. Strössner

A matrix equation method for solving PDE-constrained optimization problems

A. Bünger, M. Stoll, V. Simoncini

Compression properties and rank-structured solvers for Toeplitz, Vandermonde and related linear systems

H. D. Wilber, D. Kressner, B. Beckermann

Recycling subspaces for improved multidimensional alternating minimal energy solver

H. Al Daas, P. Benner, P. Jolivet, J. Saak

Adaptive isogeometric methods with inexact solvers

G. Gantner, A. Haberl, D. Haberlik, D. Praetorius, S. Schimanko

SPLINE-BASED METHODS FOR PARTITIONED FLUID-STRUCTURE INTERACTION

T. Spenke, N. Hosters, M. Behr

Mesh refinement for rate-optimal unstructured AS T-splines

R. Maier, P. Morgenstern, T. Takacs

C1 Isogeometric discretizations over multi-patch domains

M. Kapl, G. Sangalli, T. Takacs

Discovery of complex reaction coordinates in autonomous artificial intelligence-guided computer simulations

R. Covino, H. Jung, G. Hummer

Parareal algorithm in the context of Molecular Dynamics

U. Sharma, F. Legoll, T. Lelièvre

The role of the lag time in spectral estimation for Markov processes

E. H. Thiede, R. J. Webber, D. Dow, A. R. Dinner, J. Weare

Tensor-based EDMD for the Koopman analysis of high-dimensional systems

F. Nüske, P. Gelß, S. Klus, C. Clementi

Reduced basis methods for quasilinear elliptic PDEs with applications to permanent magnet synchronous motors

D. Korolev

ROM-based inexact subdivision methods for PDE-constrained multi objective optimization

S. Banholzer, B. Gebken, L. Reichle, S. Volkwein

Reduced Order Models for the Planning of Thermal Cancer Treatments

Z. Tokoutsi, M. Grepl, K. Veroy, M. Baragona, R. Maessen

Finite element approximation of second-order PDEs in non-divergence form in the solution of Hamilton-Jacobi-Bellman equations

J. Blechschmidt, R. Herzog, M. Winkler

A-posteriori reduced basis error-estimates for a semi-discrete in space quasilinear parabolic PDE

F. Hoppe, I. Neitzel

Stress reconstructions for quasi-static phase-field fractures

F. Bertrand

Phase-field Modeling of Fractures in Nearly Incompressible Solids

T. Heister, K. Mang, T. Wick

Extension of the phase-field model to anisotropic pressurized fracture

C. Bilgen, M. Werner, K. Weinberg

Observation and viscoelastic modeling of tidal displacements at 79°N Glacier, Greenland

J. Christmann, O. Zeising, D. Steinhage, N. Neckel, V. Helm, R. Müller, M. Scheinert, S. A. Khan, A. Humbert

A coupled multi-phase/-scale numerical description for solidification processes of steel, using a phase-field model for phase-transformation

C. Henning, T. Ricken

An anisotropic phase-field model for fracture based on a decomposition of the material tangent

C. Luo

Geometric numerical integration in simulation and optimal control of biomechanical motion

S. Leyendecker, J. Penner, U. Phutane

Simulating mechanical systems with frictional contacts using a nonsmooth generalized-alpha method

G. Capobianco, J. Harsch, S. R. Eugster, R. I. Leine

Energy preservation and energy dissipation in the numerical solution of flexible multibody systems

M. Arnold, S. Hante, D. Tumiotto

On the Stabilization of DAEs by Partial Projection

H. Grossert, R. Seifried

Multistable Tensegrity Structure as Multimodal Locomotion System

P. Schorr, N. Prem, L. Zentner, K. Zimmermann, V. Böhm

Age-dependent bone remodeling

A. Papastavrou, I. Schmidt, P. Steinmann

On the influence of biological availability on bone remodelling

I. Schmidt, A. Papastavrou, P. Steinmann

Continuum Model for Damage-Induced Healing of Soft Biological Tissues

M. Gierig, P. Wriggers, M. Marino

A Multiscale and Multiphase Model of Function-Perfusion Growth Processes in the Human Liver

L. Lambers, M. Suditsch, A. Wagner, T. Ricken

A multiscale perfusion model for metastatic liver tumor growth

E. Jessen, A. Ebrahem, D. Schillinger

Exploring the interplay between cellular development and mechanics in the developing human brain

M. S. Zarzor, S. Kaessmair, P. Steinmann, S. Budday

A strain gradient enhanced model for the phase-field approach to fracture

R. Makvandi, B. E. Abali, S. Eisenträger, D. Juhre

Adaptive Shape Functions for a Phase Field Fracture Model

D. Olesch, A. Schlüter, R. Müller, C. Kuhn

Space-dependent transition zone parameter for a phase-field model of brittle fractures

D. Phansalkar, K. Weinberg, M. Ortiz, S. Leyendecker

A phase field approach to cohesive fracture in line with Conti et al. [1]

H. Lammen, J. Mosler

Prediction of effective anisotropic properties of heterogeneous microstructures using a crack phase-field model

A. C. Hansen-Dörr, M. Kästner

Fast implicit FFT-based solvers for phase-field brittle fracture problems on heterogeneous microstructures

F. Ernesti, M. Schneider, T. Böhlke

Adaptive Particle Finite Element MEthod (A-PFEM) in metal cutting processes

X. Ye, J. M. Rodríguez Prieto, R. Müller

An objective and path independent geometrically non-linear Reissner-Mindlin shell formulation

A. Müller, A. Tkachuk, M. Bischoff

Comparison of Performance and Accuracy of the FETI-Methods and a Direct Sparse FE-Solver for Truss Structures

C. Schmaußer, G. Müller

An embedded domain method for non-linear structural membranes

T.-P. Fries, D. Schöllhammer

Nonlinear computation of cables with high order solid elements using an anisotropic material model

A. Hildebrandt, P. Sharma, S. Diebels, A. Düster

Possibilities and limitations of using arbitrary precision numbers in computational mechanics

S. Klarmann, J. Wackerfuß

Modern Numerical Approaches to Quasiperiodic Oscillations

H. Hetzler, S. Bäuerle, R. Fiedler

Simulation of a tool shank for HSC-milling under the influence of an unbalance

R. Schmidt, A. Ams

Nonlinear vibrations of rotating rings and shells under the usage of the finite element method

R. Schmidt, A. Ams

On A Hybrid Concept for Approximating Self-Excited Periodic Oscillations of Large-Scaled Dynamical Systems

J. Kappauf, H. Hetzler

Bimodal parametric excitation of a micro-ring gyroscope

A. A. Barakat, R. Lima, R. Sampaio, P. Hagedorn

A Novel Approach to Gradient Plasticity: Dislocation and Disequilibrium Densities

P. Steinmann

Averaging in dislocation mediated plasticity

K. C. Le

A new variational approach for the thermodynamic topology optimization of hyperelastic structures

P. Junker, D. Balzani

The evolution of Hooke's law under plastic deformations of fiber reinforced materials

O. Stahn, A. Bertram, W. H. Müller

On the incorporation of curvature effects into the isogeometric analysis of fibre-reinforced solids

C. Witt, T. Kaiser, A. Menzel

Modeling and analysis of magneto-elastic coupling using IGA

M. Harutyunyan, S. Schöps

Numerical modelling of electro-viscoelasticity for fibre reinforced electro-active polymers.

A. Kanan, M. Kaliske

Multiscale bone modeling considering full coupling of mechanical, electrical and magnetic effects

M. Blaszczyk, K. Hackl

A comparative study of FE-schemes for micromagnetic simulations

M. Reichel, B.-X. Xu, J. Schröder

Remarks on homogenization techniques in solid mechanics

J. Schröder, M. Labusch, L. Scheunemann, S. Maike

Investigation of instabilities due to growth of an elastic film on a heterogeneous, microstructured substrate: analytical and computational multi-scale approaches

I. Valizadeh, O. Weeger

An RVE-based investigation of thermoplastic vulcanizates exemplified by EPDM/PP

W. Sun, D. Juhre

Efficient monolithic solution of FE²-problems

N. Lange, G. Hütter, B. Kiefer

Wang tilings for modeling and simulation of non-periodic heterogeneous materials

M. Doškář, J. Novák, J. Zeman

Wall-bounded combustion

A. Dreizler, F. Zentgraf, B. Boehm

Numerical Modeling of Reactive Cleaning of Steel Melt in an Induction Crucible Furnace

A. Asad, R. Schwarze

Stochastic Modeling of a Lifted Methane/Air Jet Flame with Detailed Chemistry

T. Starick, D. O. Lignell, H. Schmidt

On Spray Modeling with Quadrature-Based Moment Methods

M. Pütz, M. Pollack, C. Hasse, M. Oevermann

An adaptive multiresolution framework applied to turbulent compressible reacting flows

M. Sroka, J. Reiss

Modeling and simulation of mass-transfer across fluid interfaces

D. Bothe, A. Weiner

Self-similar spreading with dynamic contact angles

D. Peschka, M. Gnann, L. Giacomelli

Experimental investigations on rising bubbles in vertical capillaries

S. Grünendahl, D. M. Brandner, P. Ehrhard

Nonlocal-to-local convergence of Cahn-Hilliard equations

E. Davoli, H. Ranetbauer, L. Scarpa, L. Trussardi

Sharp Interface Limits with constant Contact Angle unequal 90° - Model Problems

H. Abels, M. Moser

Weak-strong uniqueness and stability of evolutions for multi-phase mean curvature flow

J. Fischer, S. Hensel, T. Laux, T. Simon

Convergence of Ginzburg-Landau approximations to certain complex fluid models

J. Kortum

Recent analytical developments on the dynamics of nematic liquid crystals

F. De Anna

Optimal L1-relaxation and metastability for the Cahn–Hilliard equation with “bump-like” initial data

S. Biesenbach, F. Otto, R. Schubert, M. G. Westdickenberg

A neural network-based ensemble filter for non-linear data assimilation

T.-V. Hoang, H. G. Matthies, S. Krumscheid, T. Raul

Constitutive artificial neural networks: a general anisotropic constitutive modeling framework utilizing machine learning

M. Hillgärtner, K. Linka, K. P. Abdolazizi, R. C. Aydin, M. Itskov, C. J. Cyron

Physics informed neural networks for homogenization of complex microstructures

A. Henkes, H. Wessels, R. Mahnken

Chance-constrained optimal control of a gas-to-power system

K. Lux, S. Göttlich, O. Kolb

Influence of geometrical variation on mechanical properties of fibrous paper materials: a multivariate regression analysis

B. Lin, Y. Bai, P. Stein, B.-X. Xu

A Reformulation Technique for Nonlinear Bilevel Programs Based on Sequential Quadratic Programming

K. Schäfer, J. Fliege, K. Flaßkamp, C. Büskens

Mixed-integer programming based truss topology optimization of large-scale lattice structures for additive manufacturing

C. Reintjes, U. Lorenz

Preferable Minima in Nonlinear Optimization: Definition and Algorithmic Approaches

I. Mykhailiuk, K. Schäfer, K. Flaßkamp, C. Büskens

Regularization Techniques in Integer Optimal Control

P. Manns

Particular, worst and average cases in the analysis of Krylov subspace methods

J. Liesen

Prescribing convergence behavior of block GMRES and block Arnoldi

M. Kubínová, K. M Soodhalter

The symmetric eigenvalue problem and hypergraphs

K. Kahl, B. Lang

A rational Even-IRA algorithm for the solution of even polynomial eigenvalue problems

P. Benner, H. Faßbender, P. Saltenberger

GR decompositions and their relations to Cholesky-like factorizations

C. Penke, P. Benner

The maximal angle condition on finite elements - useful or not?

T. Apel, L. Eckardt, C. Haubner, V. Kempf

Finite Elements and the Memory Wall

G. Kanschat, M. Kronbichler, J. Witte

Gradient Flow Finite Element Discretizations with Energy-Based Adaptivity for the Gross-Pitaevskii Equation

P. Heid, B. Stamm, T. Wihler

Symbolic evaluation of $hp$-FEM element matrices on simplices

T. Haubold, V. Pillwein, S. Beuchler

On the efficiency of the numerical solution of partial differential equations

V. Dolejsi

Towards a Newton shape derivative scheme for VI constrained shape optimization problems

K. Welker

Shape optimization with large deformations based on nonlinear extension equations

S. Onyshkevych, J. Pinzon, M. Siebenborn

Shape, topology and eigenvalue optimization of elastic structures: a multi-phase-field approach

H. Garcke, P. Hüttl, C. Kahle, P. Knopf

Topology Optimization subject to a Local Volume Constraint

M. Ebeling-Rump, D. Hömberg, R. Lasarzik

Reconstruction of small inhomogeneities using first and second order topological derivatives

P. Gangl, K. Sturm

Numerical Identification of Motor Units in Muscles

T. Sproll, A. Schiela, M. Lowery

Learning- and data-based model predictive control with robustness guarantees

M. A. Müller

Learning-Based Model Predictive Control for Multi-Agent Systems using Gaussian Processes

H. Eschmann, P. Eberhard

Comparison of Model Predictive and Graph Algebraic Approaches to Distributed Formation Control

H. Ebel, P. Eberhard

Efficient Solution of Distributed MIP in Control of Networked Systems

Z. Liu, O. Stursberg

Infinite-horizon optimal control – Stability and dissipativity

T. Faulwasser, C. M. Kellett

Transport metrics in signal and image processing

D. Lorenz

On the Correspondence between Replicator Dynamics and Assignment Flows

B. Boll, J. Schwarz, C. Schnörr

Solving Inverse Problems With Deep Neural Networks - Robustness Included?

M. Genzel, J. Macdonald, M. März

Bregman Proximal Framework for Deep Linear Neural Networks

P. Ochs

Data driven regularization by projection

A. Aspri, Y. Korolev, O. Scherzer

The method of vertical lines in non-linear finite elements

S. Hartmann

Data driven variational models for solving inverse problems

C.-B. Schönlieb

Virtual Element Formulation for Finite Strain Elastodynamics

M. Cihan, F. Aldakheel, B. Hudobivnik, P. Wriggers

Stochastic modelling of tensor fields

S. K. Shivanand, B. Rosic, H. Matthies

Adaptive numerical simulation of quasi-static phase-field fractures

M. Walloth, K. Mang, T. Wick, W. Wollner

A Discussion of Finite Element Discretizations for Fracture Phase Field Models

R. Müller, D. Olesch, A. Schlüter, C. Kuhn

Adaptive isogeometric phase-field modelling – diffuse heterogeneities, fracture, and structural optimization

M. Kästner, P. Hennig, L. Heindel, A. C. Hansen-Dörr

Sparse transforms for arbitrary linear maps

T. Fuchs, D. Gross, F. Krahmer, R. Kueng, D. G. Mixon

RadioUNet: Fast Radio Map Estimation with Convolutional Neural Networks

R. Levie, C. Yapar, G. Kutyniok, G. Caire

Introduction to the Priority Programme on Turbulent Superstructures

J. Schumacher

Lagrangian analysis of long-term dynamics of turbulent superstructures in Rayleigh–Bénard convection using evolutionary spectral clustering

C. Schneide, K. Padberg-Gehle, J. Schumacher

Time Resolved PIV for Pipe Flow Structure at shear Reynolds Number of $Re_\tau\le{5000}

E.-S. Zanoun, A. Shahirpour, C. Egbers, J. Sesterhenn, M. Yousry, Z. Hallol, S. Merbold, V. Motuz

Turbulent superstructuers in turbulent boundary layers at high Reynolds and Mach numbers

M. Bross, C. J. Kähler

Local heat transfer measurements in large aspect ratio Rayleigh-Bénard convection

S. Moller, A. Pandey, J. Schumacher, C. Cierpka

A data-driven FEM approach to problems with uncertain material data

K. Weinberg, T. Korzeniowski

An uncertainty model for the curing process of transversely fiber reinforced plastics

E. Penner, I. Caylak, R. Mahnken

Efficient domain decomposition based reliability analysis for polymorphic uncertain material parameters

A. Schmidt, T. Lahmer

Optimization of additively manufactured polymer scaffolds for bone tissue engineering

P. Dondl

Optimization of Glulam Beams with Spatial Dependent Polymorphic Uncertainty Modeling of Structural Inhomogeneity

F. N. Schietzold, W. Graf, M. Kaliske

The moving particles method for reliability estimation: recent advances

C. Proppe

Limit cycle computation of self-excited dynamic systems using nonlinear modes

S. Tatzko, M. Stender, M. Jahn, N. Hoffmann

Study on model reduction for position optimization of acoustic black holes

C. H. Meyer, C. Lerch, S. Rothe, S. C. Langer, B. Lohmann, D. J. Rixen

Modeling the Mullins Effect of rubbers used in constrained-layer damping applications

A. Jackstadt, F. Frölich, K. Weidenmann, L. Kärger

Active Damping of Thin Film Shape Memory Alloy Devices

S. Ahmadi, K. Jacob, F. Wendler, M. Kohl

Experimental and numerical study of the effects of granular mixture composition on the elastic moduli

K. Taghizadeh, S. Luding, V. Magnanimo, H. Steeb

Towards the Simulation of the Friction Stir Welding Process with the Smoothed Particle Hydrodynamics Method

E. Shishova, P. Eberhard

New prospect for a combined operating mode of magnetorheological damper

A. S. Tan, D. Thomalla, J. Zweier, T. Sattel

SPP 1962: Non smooth and complementarity-based distributed parameter systems: simulation and hierarchical optimization

M. Hintermueller

Shape and topology optimization in fluids using phase field models

H. Garcke, M. Hinze, C. Kahle

Total Generalized Variation with Finite Elements and Applications

L. Baumgärtner, R. Bergmann, R. Herzog, S. Schmidt, J. Vidal Núñez

On subdivision and continuation methods for nonsmooth multiobjective optimization problems

S. Peitz, B. Gebken

Numerical Methods for the Regularized Beckmann Problem

D. Lorenz, H. Mahler, C. Meyer

Computing M-stationary points by a semismooth Newton method

F. Harder, P. Mehlitz, G. Wachsmuth

Multi-level approach for modelling the post-cracking response of steel fibre reinforced concrete under monotonic and cyclic loading

V. Gudzulic, G. E. Neu, G. Meschke

Macroscopic model for steel fiber reinforced high performance concrete based on unit cell calculations

M. Pise, D. Brands, G. Gebuhr, J. Schröder, S. Anders

Phase-field Fracture with Representative Crack Elements at Finite Deformations

J. Storm, M. Kaliske

PP 2256 - Variational Methods for Predicting Complex Phenomena in Engineering Structures and Materials

G. Dolzmann

Chemo-Mechanics: Variational Settings and Numerical Aspects

B. Kiefer, S. Roth, A. Seupel, S. Prüger, O. Rheinbach

Variational based effective models for inelastic materials

G. Jezdan, S. Govindjee, K. Hackl

Compliance minimization with surface penalization for a uniaxial load

J. Potthoff, B. Wirth

On relative energy estimates for diffuse interface models of two-phase flows and their structure-preserving discretization

A. Brunk, H. Egger, O. Habrich, V. Shashkov

On a 2D H1xHcurl finite element ansatz for the relaxed micromorphic model

M. Sarhil, L. Scheunemann, J. Schröder, P. Neff

Modeling and Simulation of the dynamics in semiconductor lasers

U. Bandelow

Numerical methods for resonance phenomena in nanophotonics

F. Binkowski, F. Betz, M. Hammerschmidt, P.-I. Schneider, L. Zschiedrich, S. Burger

Simulation of quantum cascade lasers

C. Jirauschek

Numerical Modelling of III-Nitride Light Emitting Diodes

F. Römer, B. Witzigmann

Ray tracing in thermally loaded solid-state laser crystals

P. L. Rall, C. Pflaum

On the relationship between Ritt and Kolchin differential algebra and tropical differential geometry

F. Boulier

Algorithmic aspects of the algebraic parameter estimation problem

A. Quadrat

Algorithmic Approach to Strong Consistency Analysis of Finite Difference Approximations to PDE Systems

D. Robertz

Algorithms for DD-finite functions

V. Pillwein

Symbolic computation for linear operators with matrix coefficients

G. Regensburger, C. G. Raab, J. Hossein Poor

Dissipativity in economic model predictive control: beyond steady-state optimality

M. A. Müller

Economic MPC without terminal constraints: Gradient-correcting end penalties enforce asymptotic stability

M. Zanon, T. Faulwasser

Storage functions for differential-algebraic equations

T. Reis, F. Haller, M. Voigt

Turnpike in optimal shape design

G. Lance, E. Trélat, E. Zuazua

Turnpike structures for the solutions of optimal control problems with objective functions of tracking type

M. Gugat

On the Relation of Velocity Turnpikes and Motion Primitives in Optimal Control of Mechanical Systems

T. Faulwasser, K. Flaßkamp, S. Ober-Blöbaum, K. Worthmann

Energy balance from thermomechanical characterization: new insights to revisit the deformation mechanisms in rubbers

J.-B. LE CAM

Experimental study on cavitation in rubber vulcanizates subjected to constrained tensile deformation

E. Euchler, R. Bernhardt, S. Wießner, G. Heinrich, F. Wilde, M. Schwartzkopf, T. Tada

Mechanics of multiple network elastomers

V. N. Khiêm, M. Itskov

Fracture simulation of fibre reinforced polymers by the phase-field approach

B. Yin, M. Kaliske

Experimental investigation and modelling of photopolymers for additive manufacturing processes

T. Rehbein, A. Lion, M. Johlitz

Chance-constrained optimal control of hyperbolic supply systems

K. Lux, S. Göttlich, O. Kolb

Cooperative Object Transportation: Modeling, Control Design and Experiments

H. Ebel, P. Eberhard

Including the Dissipative Properties from Molecular Dynamics Simulations into a Phase Field Model for Wetting

F. Diewald, M. Heier, M. Lautenschläger, S. Stephan, C. Kuhn, K. Langenbach, H. Hasse, R. Müller

Automated shape differentiation and optimization using NGSolve

P. Gangl, K. Sturm, M. Neunteufel, J. Schöberl

Shape Optimization in Shape Spaces

K. Welker

Reconstruction of quasi-local numerical effective models

A. Caiazzo, R. Maier, D. Peterseim

Phase-field modeling of fracture in heterogeneous materials

A. C. Hansen-Dörr, M. Kästner

Variational modeling of irreversible effects during solid/solid phase transformations

J. Waimann, K. Hackl, S. Reese, P. Junker

Mathematical analysis and simulation of field models in accelerator circuits

I. Cortes Garcia

Robust Controller Design for Large Sparse Systems

P. Schwerdtner, T. Mitchell, M. Voigt

A Multiscale Model of Growth Processes in Soft Tissue

L. Lambers, M. Suditsch, A. Wagner, T. Ricken

Adaptive concepts in POD model reduction

C. Gräßle, M. Hinze

Motion design of structures based on a variational formulation

R. Sachse, M. Bischoff

Microstructural modeling in solid mechanics

L. Scheunemann

A mixed phase-field fracture model - numerical simulation compared to experiments in punctured EPDM strips

K. Mang, A. Fehse, N. H. Kröger, T. Wick

Model Order Reduction in Production Engineering

F. Key

Dislocation density tensors in finite plasticity

T. Kaiser, A. Menzel

On a novel approach for modeling liquid crystalline flows

S. Metzger

Machine Learning for Nonlinear Dynamics

M. Stender

A Biphasic Fiber Reinforced Model of Articular Cartilage

F. S. Egli, T. Ricken, D. M. Pierce

Finite element formulations for constrained spatial nonlinear beam theories

J. Harsch, G. Capobianco, S. R. Eugster

Modelling a carbon spring foot prosthesis as a predeformed geometrically exact beam

E. S. Scheiterer, S. Leyendecker

Soft touch between a highly flexible bio-inspired tactile sensor and 3D objects

L. Merker, C. Behn, J. Steigenberger, K. Zimmermann

Simulative investigation of the locomotion of a snake-like soft robot

F. Lamping, K. de Payrebrune

Curvature sensing of a soft robot based on conductive foam

M. Grube, R. Seifried

Simulating vertebroplasty: A biomechanical challenge

Z. Trivedi, C. Bleiler, A. Wagner, O. Röhrle

Modelling basal-cell carcinoma behaviour in avascular skin

M. Suditsch, P. Schröder, L. Lambers, T. Ricken, A. Wagner

Towards Consideration of Osteoarthritis in Articular Cartilage by Numerical Modeling of a Hyperelastic Biphasic Fiber Reinforced Model

F. S. Egli, T. Ricken, D. M. Pierce

Inverse Identification of Material Properties of the Human Eye Using Optical Deformation Measurements

S. Münch, M. Röllig, D. Balzani

Identification of mechanical models and parameters for alginate-based hydrogels as proxy materials for brain tissue

S. Kaessmair, T. Distler, E. Schaller, A. Boccaccini, P. Steinmann, S. Budday

A coarse-grained phase-field crystal model of plastic motion

A. Voigt

Suction-induced fracturing in multiphase porous materials: Numerical modeling and experimental validation

Y. Heider

Phase-field modelling and simulation of fracture in viscoelastic materials

F. Dammaß, M. Ambati, M. Kästner

Phase-field modelling of fatigue crack fracture under residual stresses

M. Seiler, S. Keller, N. Kashaev, B. Klusemann, M. Kästner

Experimental investigation and numerical simulation of cyclic deformation behavior of SLM-manufactured aluminum alloys

T. Wiegold, S. Aygün, S. Klinge

xNy-elements in the finite cell method for simulating multi-material problems

M. Petö, F. Duvigneau, D. Juhre, S. Eisenträger

Efficient numerical treatment of a gradient damage model for materials undergoing large deformations.

J. Riesselmann, P. Junker, D. Balzani

Local Refinement in Isogeometric Analysis of Complex Tire Models

A. Israfilova, M. Garcia, M. Kaliske

High Performance Mesh Distortion Insensitive Unsymmetric EAS Elements for Linear Elasticity

R. Pfefferkorn, P. Betsch

Experimental analyses of the effects of cooling lubricants to expand an FEM-based physical grinding force model

F. Kästner

A remeshing approach for the finite cell method applied to problems with large deformations

W. Garhuom, S. Hubrich, L. Radtke, A. Düster

High-order SBFEM solution of the Reynolds equation

S. Pfeil, H. Gravenkamp, F. Duvigneau, E. Woschke

Modeling of fiber-bending stiffness in fiber-reinforced composites with a dynamic mixed-finite element method based on the principle of virtual power

I. Kalaimani, J. Dietzsch, M. Groß

Hopf bifurcations for an oversteer vehicle - the influence of wheel load changes

A. Steindl, J. Edelmann, M. Plöchl

Non-Linear Vehicle Dynamics with Multiplicative Road Models

W. V. Wedig

A primal-dual interior point algorithm for single crystal plasticity

L. Scheunemann, P. S. Nigro, J. Schröder, P. M. Pimenta

On the algorithmic formulation of local and non-local crystal plasticity models

V. Fohrmeister, J. Mosler

Gradient-extended crystal inelasticity with a coupling of a microtractions and decohesion model

L. Spannraft, M. Ekh, F. Larsson, K. Runesson, P. Steinmann

Phase-field modelling and simulation of the evolution of twelve crystallographic martensite variants in austenitic parent grains

M. Graf, M. Kuntz, H. Autenrieth, F. Diewald, R. Müller

Structural design of additively manufactured porous Zr-based bulk metallic glass

J. Shi, S. Ma, B. Markert

Virtual element method for finite strain crystal-plasticity

C. Böhm, F. Aldakheel, P. Wriggers

An efficient method for multi-physical problems using coupled isogeometric boundary elements and finite elements.

M. P. Rajski, R. A. Sauer

Building models for coupled thermo elastic problems in different software architectures using a new model exchange format

S. Sauerzapf, A. Naumann, M. Beitelschmidt

Variationally consistent framework to discretize higher-order imperfect interface models for thin layers with isogeometric cut finite element methods

H. T. Nguyen, S. K. F. Stoter, S. Baranova, S. G. Mogilevskaya, D. Schillinger

Investigation of different discretizations in time for the modeling of dynamic behavior of saturated porous media

J. N. Bergmann, J. Bluhm, A. Schwarz, J. Schröder

A partitioned scheme for coupling of FEM and DEM simulations of granular materials

A. Atrian, J. Lund, L. Radtke, V. Skorych, M. Dosta, A. Düster

Introduction to numerical homogenization of PDEs with arbitrary rough coefficients

D. Peterseim

Reconstruction of quasi-local numerical effective models

A. Caiazzo, R. Maier, D. Peterseim

Numerical Homogenization of Heterogeneous Fractional Laplacians

D. L. Brown, J. Gedicke, D. Peterseim

Numerical Homogenization of Multiscale Fault Networks

M. Heida, R. Kornhuber, J. Podlesny, H. Yserentant

Numerical stochastic homogenization by quasilocal effective diffusion tensors

D. Gallistl, D. Peterseim

Superstructures in Rayleigh-Bénard turbulence

D. Krug

Velocity and Thermal Boundary Layer Equations for Turbulent Rayleigh-Benard Convection

O. Shishkina, E. S. C. Ching

BOUNDARY ZONAL FLOW IN TURBULENT ROTATING RAYLEIGH–BÉNARD CONVECTION

X. Zhang, O. Shishkina

Rotating turbulent Rayleigh-Bénard convection at very large Rayleigh numbers

M. Wedi, D. van Gils, G. Ahlers, E. Bodenschatz, S. Weiss

TURBULENT LIQUID METAL RAYLEIGH-BÉNARD CONVECTION AT HIGH RAYLEIGH NUMBERS

F. Schindler, T. Zürner, T. Vogt, S. Eckert, J. Schumacher

Sharp Interface Limits of Diffuse Interface Models for Two-Phase Flows

H. Abels, A. Marquardt

A Model for Bilayer Couette Flow in Topographically Patterned Lubricated Contacts

M. Mellmann, M. Scholle, P. H. Gaskell

Evaluation of Lagrangian Particle Information from VOF Simulation Data

A. Spitzenberger, S. Neumann, R. Schwarze

Existence of global weak solutions to an inhomogeneous Doi model for active liquid crystals

O. Sieber

About a magnetic diffuse interface model and an existence result

S. Mitra, A. Schlömerkemper, M. Kalousek

Explicit Results and Numerical Implementations in the Electromagnetic Field Theory

I. Y. Dmitrieva

On the field-induced transport of magnetic nanoparticles in incompressible flow

P. Weiß

Regular patterns in systems in equilibrium: From ferrofluids to dipolar Bose-Einstein condensates

A. Stylianou

A simple approach to proving well-posedness and convergence rates for a broad class of McKean--Vlasov equations

H. A. Hoel, A.-L. Haji-Ali, R. Tempone

MLMC method to estimate propagation of uncertainties in electromagnetic fields scattered from objects of uncertain shapes

A. Litvinenko, A. Yucel, H. Bagci, R. Tempone, J. Oppelstrup, E. Michielssen

Importance sampling for a robust and efficient multilevel Monte Carlo estimator for stochastic reaction networks

C. Ben Hammouda, N. Ben Rached, R. Tempone

Method of Green's potentials for elliptic PDEs in domains with random boundaries

V. Reshniak, Y. Melnikov

A finite differences approach for optimization of gas networks

S. Hossbach, M. Lemke, J. Reiss

A combinatorial framework for Mixed-integer optimal control problems

F. Bestehorn, C. Kirches

Analysis and numerical solution of an optimal control problem arising in non-Newtonian fluid mechanics

C. Christof, M. Winkler, R. Herzog

Variational discretization of a parabolic optimal control problem with sparse initial data

E. Herberg, M. Hinze

Optimization of a partial differential equation on a complex network

M. Stoll, M. Winkler

Fast Solvers and Multilevel Circulant Preconditioners for Fractional Differential Equation Constrained Optimization

J. W. Pearson, S. Pougkakiotis, S. Leveque, J. Gondzio

Frequency-weighted damping via non smooth optimization and fast computation of QEPs

N. Jakovcevic Stor, T. Mitchell, M. Puvaca, Z. Tomljanovic

Extended Group Finite Element Method for a port-Hamiltonian Formulation of the Non-Isothermal Euler Equations

S.-A. Hauschild, N. Marheineke

Model adaptation of hyperbolic balance laws

J. Giesselmann, H. Joshi

High order well-balanced scheme for hyperbolic balance laws

Y. Mantri, M. Herty, S. Noelle

Fluxes on the mesoscopic level: Boltzmann vs. BGK models

H. K. Babovsky

Numerics of gas pipeline networks

S. M. Grundel

Numerical methods to solve non-local conservation laws for material flow problems

S. Göttlich

Implicit methods for district heating networks

M. Eimer, R. Borsche, N. Siedow

Liquid crystals on deformable surfaces

A. Voigt

A trace finite element method for Allen-Cahn equation on evolving surfaces

M. Olshanskii, X. Xu, V. Yushutin

φ-FEM: a finite element method on domains defined by level-sets

M. Duprez, V. Lleras, A. Lozinski

A subgrid-scale boundary layer model following from the unification of Nitsche's method and variational multiscale analysis

S. K. Stoter, M. F. ten Eikelder, F. de Prenter, I. Akkerman, E. H. van Brummelen, C. V. Verhoosel, D. Schillinger

An unfitted Eulerian finite element method for the time-dependent Stokes problem on moving domains

H. von Wahl, T. Richter, C. Lehrenfeld

Analysis of Optimal Control Problems with an $L^0$ Term in the Cost Functional

D. Wachsmuth

Structure Exploitation (not only) for PDE Constrained Nonsmooth Optimization

O. Weiß, A. Walther, S. schmidt

Second-order optimality conditions of an optimal control problem governed by a regularized phase-field fracture propagation model

A. Hehl, I. Neitzel

Optimal control of the fractional Laplace equation

S. Dohr, C. Kahle, S. Rogovs, P. Swierczynski

Optimal control of the drift in Fokker-Planck equations

H. Meinlschmidt, K. Kunisch

Characterization of fluid flows and identification of fluid flow domains by a coupled CFD-MRI method

F. Klemens, J. Jeßberger, G. Thäter, M. J. Krause

Structure-Preserving Model Reduction for Bilinear Systems

P. Benner, S. W. R. Werner

Model Reduction of Differential-Algebraic Systems by Parameter-Dependent Balanced Truncation

J. Przybilla, M. Voigt

AAA-inspired systems-theoretic model reduction for linear dynamical systems

I. V. Gosea, S. Gugercin, C. Beattie

Structure Preserving Model Order Reduction by Parameter Optimization

P. Schwerdtner, M. Voigt

Identification of Second-Order Systems from Frequency Response Data

I. Pontes Duff, P. Goyal, P. Benner

Data-Driven Identification of Dynamical Systems with Hard (non-trivial, strong) Nonlinearities

D. S. Karachalios, I. V. Gosea, A. C. Antoulas

Super-resolution of points and curves

S. Kunis

Deterministic sparse and stable FFT for M-sparse vectors

T. von Wulffen

Exact Reconstruction of Extended Exponential Sums from their Fourier Coefficients

N. Derevianko, G. Plonka

Exact Reconstruction of Sparse Non-Harmonic Signals from Fourier Coefficients

M. Petz, G. Plonka, N. Derevianko

Structured Low-Rank Approximation of Hankel Matrices

H. Knirsch, G. Plonka

On the History of Mechanics in St. Petersburg/Petrograd/Leningrad

H. Altenbach

Plasticity, Viscosity , Tenacity – Remarks on the bitter Forbes – Tyndall Controversy

D. Gross

History of "Sneddon" solution in contact mechanics

E. Popova, V. L. Popov

The contribution of Theodore von Kármán to the development of metal forming technology

O. T. Bruhns

Johannes Kepler's comments in Jost Bürgi's manuscript on "Coss"

P. Ullrich

Selected historical aspects of wave phenomena in the context of dynamical systems, and applications in seamless learning

R. Gunesch

Long-Term Stability and Debonding of Cementless Implants

K. Immel, V.-H. Nguyen, G. Haiat, R. A. Sauer

Testing individualized trauma implants via a new workflow under realistic daily life scenarios

M. Roland, R. Martin, T. Tjardes, B. Bouillon, D. Stefan

An Active Female Human Body Model for Simulation of Rear-End Impact Scenarios

C. Kleinbach, F. Kempter, J. Fehr

Porosity analysis in advanced materials for aero engines

S.-M. Rauscher, A. Raina, I. Kaleel

Damage and fracture of the optimized X0-specimen

S. Gerke, J. Liedmann, M. Brünig, F.-J. Barthold

Identifying the Non-local Interactions of Self-Adhesive Polymeric Films with Digital Images of T-peeling

B. Bagheri, K. Naumenko, H. Altenbach

A data-driven approach for the structural analysis of hybrid metal-fiber reinforced plastic laminates

A. Hürkamp, F. Rothe, K. Dröder

Data-driven Material Modeling combining Proper Orthogonal Decomposition and Neural Networks

C. Weißenfels, D. Huang, P. Wriggers

Lapping as a tribological system and parameter identification aspects

R. Bilz, K. M. de Payrebrune

Minimum weight design of curvilinearly grid-stiffened variable-stiffness composite fuselage panels considering buckling and manufacturing constraints

A. Alhaj Ahmad, C. Mittelstedt

Sandwich panels with functionally graded strut-based lattice cores

H. Georges, C. Mittelstedt, W. Becker

Neural networks for structural optimisation of mechanical metamaterials

S. Bronder, S. Diebels, A. Jung

Applications of a hybrid approach to describe the elastic-plastic deformation behavior of foam like media involving neural networks

M. Abendroth, A. Malik, G. Hütter, B. Kiefer

Concentration-Specific Constitutive Modeling of Gelatin Based on Artificial Neural Networks

K. P. Abdolazizi, K. Linka, C. J. Cyron

Towards the engineering design of metamaterials structures through micromorphic enriched continuum modeling

A. Madeo

Relaxed micromorphic modeling of finite-size mechanical metamaterials

G. Rizzi, P. Neff, A. Madeo

Transparent relaxed micromorphic description of anisotropy in metamaterials

M. V. d'Agostino, A. Madeo, P. Neff

Multiscale modelling of the cyclic behavior of metallic materials with graded microstructure

J. A. Kuhn, P. Sonnweber-Ribic, M. Schneider, T. Böhlke

Integral-type non-local damage simulation of composites using mean-field homogenization methods

P. Lenz, R. Mahnken

Strong convergence rates for space-time discrete numerical approximation schemes for stochastic Burgers equations

M. Hutzenthaler, A. Jentzen, F. Lindner, P. Pusnik

Hyperbolic conservation laws with stochastic jump coefficient

L. Brencher, A. Barth

Modeling of directional uncertainty using moments of the angular central Gaussian

F. Ospald, R. Herzog

Continuous Galerkin Schemes for Semi-Explicit Differential-Algebraic Equations

R. Altmann, R. Herzog

Uzawa-type iterative methods for double saddle point problems in poromechanics

J. K. Kraus

Evaluation and development of a spectral deferred correction method for convection-diffusion equations

M. Grotteschi, M. Guesmi, J. Stiller

Idiophones - even simple looking musical instruments are very demanding

P. Eberhard, P. Bestle, M. Hanss

A transfer operator based computational study of mixing processes in open flow systems

A. Klünker, K. Padberg-Gehle

Trajectory Planning for Closed Kinematic Chains Applied to Cooperative Motions in Health Care

C. Knoll, X. Jia, K. Röbenack

The Deep Capsule Prior - Unsupervised image processing for computed tomography

M. Schmidt, A. Denker, J. Leuschner

Generating a Real World Traffic Sign Object Detection Dataset via Bootstrapping using Synthetic Data

L.-M. Evers

3D Gamma Image Reconstruction using Deep Convolutional Neural Networks for Proton Beam Therapy

J. N. Basalyga, G. Kroiz, C. A. Barajas, M. K. Gobbert, P. Maggi, J. Polf

A novel black-box preconditioning strategy for high-throughput density-functional theory

M. F. Herbst, A. Levitt, E. Cancès

Optimal experiment design with respect to electrode configurations for a piezoelectric problem

V. Schulze, S. Schmidt, B. Jurgelucks, N. Feldmann, L. Claes

On Defect Characterization in Carbon Fiber Reinforced Polymer via Gradient-based Optimization

B. Jurgelucks, J. Bulling, A. Walther, J. Prager

An extended version of the Intermediate Axis Theorem for a freely rotating rigid body

R. I. Leine, G. Capobianco

Derivation of Analytical, Closed-form Formulas for the Calculations of the Instantaneous Screw Axes of Arbitrary Rigid 3D Multi-Body Systems

J. Boungard, J. Wackerfuß

Modeling the Evolution of a cluster of gravitating bodies taking into account their absolutely inelastic collisions

D. G. Kiryan, G. V. Kiryan

Analysis of Flexible Multibody Impact Simulations Using Reduced Isogeometric Finite Element Models

T. Rückwald, A. Held, R. Seifried

Improved collision detection for rigid body simulations

U. J. Römer, A. Fidlin, W. Seemann

Unraveling the principles of vascular mechanobiology across the scales

C. J. Cyron, J. F. Eichinger, D. Paukner, R. C. Aydin

Macroscopic modelling of stress driven anisotropic growth in bioengineered tissues

L. Lamm, H. Holthusen, C. Böhm, S. Jockenhövel, S. Reese

Influence of residual stresses and fiber orientation on smooth muscle contraction in arterial walls

K. Uhlmann, D. Balzani

Multi-layered tissue models in patient-specific simulations of aortic dissection

R. Schussnig, K. Bäumler, T.-P. Fries

A computational framework for gradient-enhanced damage -- implementation and applications

R. Schulte, R. Ostwald, L. Sprave, A. Menzel

Modeling gradient-enhanced anisotropic ductile damage: Application to low cycle fatigue

K. Langenfeld, K. Möhring, F. Walther, J. Mosler

Anisotropic plasticity - regularised damage material model for sheet metals

J. Friedlein, J. Mergheim, P. Steinmann

Nonlocal damage modelling for finite element simulations of ductile steel sheets under multiaxial loading

M. Nahrmann, A. Matzenmiller

Reduced integration-based solid and solid-shell finite elements for gradient-extended damage

O. Barfusz, T. van der Velden, T. Brepols, S. Reese

A gradient-enhanced micro-polar damage-plasticity approach for modeling mode I and mode II failure of concrete

M. Neuner, G. Hofstetter

A comparative study of numerical approaches for the computation of effective properties of micro-heterogeneous materials

R. Assaf, L. Scheunemann, C. Birk, J. Schröder

A combination of the SBFEM and transfinite elements for modeling three-dimensional structures on octree-meshes

H. Gravenkamp, A. A. Saputra, S. Duczek

Image-based stress analysis of porous structures produced by freeze casting

C. Birk, D. C. Lupascu

A NURBS enhanced polygonal element formulation based on the scaled boundary method for the analysis of solids in boundary representation

R. Reichel, S. Klarmann, S. Klinkel

Back Calculation of Internal Forces of Concrete Skyscrapers by means of In Situ Monitoring

H. W. Müllner, W. Wallisch, P. Kremnitzer

A homogenisation approach for shell structures using scaled boundary isogeometric analysis on RVE-level

L. Mester, S. Klarmann, S. Klinkel

Space-time integration in structural dynamics using the proper generalized decomposition

F. Bamer, N. Shirafkan, M. Stoffel, B. Markert

An energy-momentum scheme for extended continuum models with rotational degrees of freedom

M. Groß, J. Dietzsch, I. Kalaimani

Analysis of higher order accurate time integration schemes within multifield plasticity

B. Schröder, D. Kuhl

Inverse dynamics of nonlinear elastic ropes and the method of characteristics

T. Ströhle, P. Betsch

A mixed finite element formulation for energy-momentum time integrations of composites with fiber bending stiffness

J. Dietzsch, M. Groß, I. Kalaimani

Simulation of the dynamic properties of open cell foams by means of a macroscopic stochastic model

S. Kirchhof, A. Ams

Efficient surrogate strategy for investigating stick-slip instability

A. Fau, J. N. Fuhg

Quenching friction-induced oscillations in multibody-systems

S. Keller, W. Seemann

On the orbital stability of periodic trajectories of systems with discontinuous right-hand sides

A. Zuyev, P. Benner, A. Seidel-Morgenstern

Mitigation of Resonant Vibrations using Impact Absorbers

M. Krack

Stability analysis of dynamic extremum seeking systems via Lie brackets approximations

V. Grushkovska

Constitutive modeling of austenitic TRIP-steels at small scales -- mean-field homogenization and simulation of oligo-crystals

S. Prüger, B. Kiefer

Constitutive modelling of the strain induced martensite transformation observed in metastable austenitic steels and TRIP steels

H. K. Thammineni, T. Zhu, M. Smaga, T. Beck, R. Müller

Intermetallic compounds formation during solid-state joining of an Al-Mg alloy via a multiphase-field approach

S. H. Raza, B. Klusemann

The First Stage of Firn Densification - An Evaluation of Grain Boundary Sliding

T. Schultz, R. Müller, D. Gross, A. Humbert

The effect of phase transformation on residual stress evolution during cooling

S. Uebing, D. Brands, L. Scheunemann, J. Schröder

Work - conjugacy of stress and strain tensors and its role in 3D hyperelastic isotropic material formulation

A. Dutzler, W. Guggenberger

Experimental and numerical investigation on the mechanical behavior of 3D printed TPU

R. Landgraf, E. Oelsch, V. Steiniger, J. Ihlemann

Structural topology optimization of 3D-printable microlattices for lightweight materials

A. Krischok, M.-A. Keip

Numerical modelling for non-isothermal quasi-static experiments of SLS-PA12

I. Sagradov, D. Schob, H. Sparr, R. Roszak, P. Maasch

Hysteretic behaviour of octet-truss lattice material with shape memory

M. Kuczma

Numerical investigation of the mechanical properties of amorphous graphene

J. Stratmann, F. Ebrahem, F. Bamer, B. Markert

Numerical investigation of the mechanical properties of an amorphous network glass

J. Stratmann, F. Ebrahem, F. Bamer, B. Markert

Freezing of sea ice with inhomogeneous material distribution using the Theory of Porous Media

A. Schwarz, J. Bluhm, J. Schröder, S. Skatulla

In Silico Modeling of Coupled Physical-Biogeochemical (P-BGC) Processes in Antarctic Sea Ice

A. Thom, T. Ricken

Coupled simulation of deep tunnel advance in initially saturated Innsbruck quartz phyllite

P. Gamnitzer, M. Schreter, M. Neuner, G. Hofstetter

Geometrically and Physically Nonlinear Coupled Consolidation Problem

N. B. Artamonova, S. V. Sheshenin

Predictive modeling and simulation of silica aerogels by using aggregated structures

R. Abdusalamov, P. Pandit, M. Itskov, B. Milow, A. Rege

Geometric and finite element modeling of biopolymer aerogels to characterize their microstructural and mechanical properties

R. Chandrasekaran, M. Hillgärtner, A. Rege, B. Milow, M. Itskov

The Effect of Functionally-Graded Voids and GNPs on the DamageTolerance of Polyurethane Foam Core

A. Y. Al-Maharma, P. Sendur, S. P. Patil, B. Markert

New problems in homogenization: Layer- vs bulk properties

R. Glüge, R. Falkenberg

Applications of the Asymptotic Homogenization to Materials with Periodic and Non-Periodic Micro Structures

S. V. Sheshenin, N. B. Artamonova, P. D. Klementyev

A model order reduction technique for FFT-based microstructure simulation using a geometrically adapted reduced set of frequencies

C. Gierden, J. Waimann, B. Svendsen, S. Reese

Tensor refinement for multiscale diffusion

V. Kazeev

Homogenization of linearized elasticity in a two-component medium with slip displacement conditions

T. Lochner, M. A. Peter

Multiscale FEM for light propagation through realistic photonic crystals

M. Kozon, M. Schlottbom, J. J. van der Vegt, W. L. Vos

Numerical Homogenization of the Maxwell-Debye system

J. P. Freese, C. Wieners, D. Gallistl

Mesh-free methods for parametrized partial differential equations

C. Rieger

Parametric FEM for computational homogenization of heterogeneous materials with random voids

D. Pivovarov, J. Mergheim, K. Willner, P. Steinmann

On symmetry induced scaling laws for arbitrary moments and its validation using channel flow DNS at Re_tau=10^4

M. Oberlack, S. Hoyas, F. A. Ávila, S. Kraheberger

Contribution of Large and Very Large Scale Motions to the Turbulent Kinetic energy in Turbulent Pipe Flow

Z. Hallol, S. Merbold, C. Egbers

Interaction of the Large-Scale Motions with the Near-Wall Turbulence in Pipe Flows

S. Richter, Z. Hallol, E.-S. Zanoun, C. Egbers

Data-driven identification of the spatiotemporal structure of turbulent flows by streaming Dynamic Mode Decomposition

R. Yang, X. Zhang, P. Reiter, M. Linkmann, O. Shishkina

Influence of the correlation model on the continuous mode conversion

E. Zimmermann, W. Weber

Heuristic dispersion design of discrete periodic systems

A. Tkachuk, M. Tkachuk

On the analysis of contact acoustic nonlinearities caused by sub-surface cracks in vibrating beams

M. Schagerl, C. Kralovec

On the forward simulation and cost functions for the ultrasonic material characterization of polymers

D. Itner, H. Gravenkamp, D. Dreiling, N. Feldmann, B. Henning

High Accuracy Measurements of Lamb Waves Using 2D Fourier Transform and Laser Vibrometry

T. Barth, R. Lammering

The waiting time phenomenon in a Lagrangian discretization

J. Fischer, D. Matthes

On Echo Chains in the Euler Equations as a Linear Mechanism: Blow-up and Modified Asymptotics

C. Zillinger, Y. Deng

The Jordan-Moore-Gibson-Thompson equation of nonlinear acoustics: Well-posedness and singular limit for vanishing relaxation time

B. Kaltenbacher, V. Nikolic

Homogenisation of Stokes Flow in a Porous Medium with Evolving Microstructure

D. M. Wiedemann, M. A. Peter

Stochastic homogenization on perforated domains

M. Heida

Tensor-Galerkin POD for Efficient Uncertainty Quantification in PDEs with Multivariate Random Parameters

P. Benner, J. Heiland

Efficient Computation of the Optimal Bounds on the Probability of Failure of a Sheet Metal Forming Process

N. Miska, D. Balzani

Optimal sensor placement for thermo-elastic coupled machine models

A. Naumann, R. Herzog

An Active Signature Methode for Constrained Optimization Using Abs-Linearization

T. Kreimeier, A. Walther, A. Griewank

Scalable solvers for PDE constrained shape optimization of cellular composites

A. Vogel, M. Siebenborn

Efficient level set-based topology optimization of flexible multibody systems using radial basis functions

A. Azari Nejat, A. Held, R. Seifried

Surface Metrics and Geometrical Constraints Within CAD-Free Adjoint-Based Fluid Dynamic Shape Optimization

N. Kühl, P. M. Müller, M. Siebenborn, T. Rung

Topology and material optimization including a filter to smooth fiber pathways

D. R. Jantos, K. Hackl, J. Philipp

Numerical Linear Algebra in Data Assimilation

M. Freitag

A computational framework for handling semi infinite quasi-Toeplitz matrices

S. Massei, D. A. Bini, B. Meini, L. Robol

Multivalent Binding Kinetics as an Invariant Subspace Projection of Markov Processes

M. Weber, F. Erlekam, M. Zumbansen

Study of Exploiting Coarse-Grained Parallelism in Block-Oriented Numerical Linear Algebra Routines

G. C Kroiz, A. Bardakoff, T. Blattner, W. Keyrouz

Stabilized Nitsche fictitious domain method with higher order variational space-time discretization for the Navier--Stokes equations

M. Bause, M. Anselmann

Space-time methods for the Stokes problem: dynamic meshes

I. Voulis

PDEs on Domains with Time-Dependent Topology

M. von Danwitz, V. Karyofylli, N. Hosters, M. Behr

A Space-Time Method for Maxwell's Equations

J. I. M. Hauser, O. Steinbach

Time-Continuous Simplex Space-Time Finite Element Method and Model Order Reduction for Deforming Domain Problems

F. Key, M. von Danwitz, F. Ballarin, S. Elgeti, M. Behr, G. Rozza

Optimal feedback stabilization via deep neural network approximation

D. Walter, K. Kunisch

Sparse optimization of integral shallow neural networks

K. Pieper, A. Petrosyan

Adjoint Based Optimal Control of District Heating Networks

D. Linn, J. Mohring, R. Pinnau

Solution and Applications of PDE Constrained Inverse Problems related to Turbulence Modeling

R. Pochampalli, N. R. Gauger

Numerical Methods for H-infinity-Control of Large-Scale Systems

N. Aliyev, P. Benner, E. Mengi, T. Mitchell, P. Schwerdtner, M. Voigt

Convex Synthesis of Accelerated Gradient Algorithms

C. Scherer, C. Ebenbauer

Optimization of the distance to non-passivity and instability via robust realizations

V. Mehrmann, P. Van Dooren

The missing link between the output and the H2-norm of bilinear systems

M. Redmann

Minimality of Linear Switched Systems with known switching signal

M. S. Hossain, S. Trenn

Challenges in dynamic imaging

B. Hahn, S. Blanke, M. Kienle, A. Wald

Unsupervised classification with orthogonal projections

A. Breger, M. Ehler

Multi-scale tomographic analysis for micron-sized particulate samples

M. de Langlard, O. Furat, R. Ditscherlein, J. Martins de Souza e Silva, J. Sygusch, M. Rudolph, T. Leissner, U. A. Peuker, V. Schmidt

A Generative Variational Model for Inverse Problems in Imaging

A. Habring, M. Holler

Shape Reconstruction of Inclusions in Elastic Bodies Based on Real Data via Monotonicity-based Methods

S. Eberle, B. Harrach, J. Moll

Beam-to-solid interaction - From embedded fibers towards contact

I. Steinbrecher, A. Popp

Graph-based Tensile Strength Simulations of Composite Nonwovens

M. Harmening

Asymptotically Justified Boundary Conditions for Numerics of a Viscoelastic Two-Phase Melt Spinning Model

M. Ettmüller, W. Arne, N. Marheineke, R. Wegener

A fast and low-memory isogeometric Galerkin method for Karhunen-Loève approximation of random fields with emphasis on large-scale 3D applications

M. Ł. Mika, R. R. Hiemstra, M. M. Dannert, D. Schillinger, U. Nackenhorst, T. J. R. Hughes

Modeling the Effective Transdermal and Lateral Diffusivities in Stratum Corneum using Homogenization

J. Wang, G. Wittum, J. Nitsche, A. Naegel

Multiscale Modeling of Skin Penetration

A. Nägel

On the numerical behaviour of constrained mechanical systems within the framework of optimal control

S. Schneider, P. Betsch

Internal Dynamics of multibody systems

T. Berger, L. Lanza

MBS model for design and control of a hydrofoil boat

M. Graf

Time-Optimal Control of a Moon Landing - Ascent, Descent, and Aborts

P. Eichmeir, T. Lauß, W. Steiner

Computational Challenges in Modelling the Musculoskeletal System

O. Röhrle, O. Avci

Characterisation of passive mechanical properties in healthy and infarcted rat myocardium

D. Martonová, M. Alkassar, J. Seufert, D. Holz, M. T. Duong, B. Reischl, O. Friedrich, S. Leyendecker

Applicability of the pseudo-electrocardiogram approach in virtual laboratory studies: Comparison with full numerical simulations based on the bidomain model

D. Ogiermann, L. E. Perotti, D. Balzani

Experiment and simulation of a single-fiber push-out test on glass fiber reinforced SMC

B. Rohrmüller, P. Gumbsch, J. Hohe

Analysis of the influence of process-induced damage on the fracture behaviour – a study on remote laser cut carbon fibre reinforced polymers

B. Schmidt, M. Rose, M. Zimmermann, M. Kästner

Semi-analytical method for the stress analysis of transverse cracks in composite structures

C. Peiler, A. Kappel, C. Mittelstedt

A semi-analytical approach for the efficient prediction of thermally induced interface crack initiation at bi-material free edges

S. Dölling, S. Bremm, A. Kohlstetter, J. Felger, W. Becker

A general sandwich-type model for delamination failure in angle-ply laminates under thermo-mechanical loading

C. Frey, S. Dölling, W. Becker

Constrained motion design for adaptive structures based on a variational formulation

R. Sachse, F. Geiger, M. Bischoff

Multiscale modeling and optimization of hierarchical plant structures

D. Schillinger, T. Gangwar, K. P. Smith, J. D. Heuschele

Tail end prediction of structural response using neural networks

D. Thaler, F. Bamer, B. Markert

Topology evolution of composite structures based on a phase field model

J. B. Wulf, I. Muench

Correction of wave signals for PMMA Split Hopkinson pressure bar setups

S. Bieler, K. Weinberg

Efficient computation of coupled bending and torsion vibrations of slender structures with an axially moving eccentric load

H. J. Holl, L. Keplinger

On the impact of the jerk on structural dynamics

W. Steiner

Application of variable excitation frequency for amplitude reduction

V. Simader, H. J. Holl

Transversal vibrations of belt drives with various time-varying belt lengths

D. Schnürer, H. J. Holl

A Mixed Acoustic Fluid Finite Element in Boundary Representation for Fluid-Structure Interaction

B. Sauren, S. Klinkel, S. Klarmann

Passage through resonance of two coupled exciters

T. Yüzbasioglu, F. Alexander

Influence of lubricant film cavitation on the vibration behaviour of semi-floating ring supported turbocharger rotor

C. Ziese, C. Irmscher, E. Woschke

Deformations of a piezo-actuated bearing ring in journal bearings

A. Bitner, W. Seemann

Influence of thermally induced changes in lubricating gap clearance and oil viscosity on nonlinear oscillations of hydrodynamically supported rotors

C. Irmscher, C. Ziese, E. Woschke

A robust hybrid-element family for strongly compressed hyperelastic materials

P. Schneider, J. Schönherr, C. Mittelstedt

Calibration of the Material-Point-Method for machining simulation

S. F. Maassen, R. Niekamp, J. Schröder, P. Wiederkehr, W. Theisen

Computational Stability Analysis of Diffusion-Deformation Processes at Finite Strains

S. Nirupama Sriram, E. Polukhov, M.-A. Keip

Electro-magneto-mechanical response of polycrystalline materials: computational homogenization based on the Virtual Element Method

C. Böhm, B. Hudobivnik, P. Wriggers, M. Marino

Efficient modeling of material dissolution in electrochemical machining

T. van der Velden, B. Rommes, A. Klink, S. Reese, J. Waimann

Thermomechanical and multiscale modeling of polymeric materials with complex microstructures

S. Aygün, S. Klinge

Recent advancements of the multiscale Capriccio method for polymers

S. Pfaller, C. Bauer, M. Ries, W. Zhao

Aspects of adaptive discrete-to-continuum modelling of thermoplastics

C. Bauer, S. Pfaller

Modeling Size Effects in Polymer Nano-Composites

P. Kumar, J. Mergheim

Consideration of the nano- and microscale structure of semi-crystalline polymers in constitutive material models

T. D. Horn, H. Wulf, J. Ihlemann

Fundamentals of electro-mechanically coupled computational multiscale formulations for electrical conductors

T. Kaiser, A. Menzel

Simulation of granular materials with the discrete element method to investigate their suitability as crash-absorber in ship collisions

S. Kraus, C. Woitzik, M. Dosta, A. Düster

A numerical method for computing the effective crack resistance of heterogeneous media

M. Schneider

Damage identification in concrete using CODA waves: Multiscale computational modeling and feature engineering

G. Vu, J. J. Timothy, L. A. Saydak, E. H. Saenger, G. Meschke

Modeling technique for the linear-elastic material behavior of short fiber-reinforced composites using random fields

N. Rauter, R. Lammering

Numerical model reduction of the electro-chemically coupled multi-scale transport of Li-ions in structural battery electrolytes

V. Tu, K. Runesson, F. Larsson, L. E. Asp, R. Jänicke

Computational Modelling and Design of Compressible Cementitious Composite Materials

T. Iskhakov, J. J. Timothy, G. Meschke

On selective homogenization in multi-scale phase-field fracture model

R. Bharali, F. Larsson, R. Jänicke

Turbulent flow over heterogeneous roughness

B. Frohnapfel, K. Schaefer, P. Forooghi, A. Stroh

Simulation of flow over pseudo-random rough surfaces

J. Yang, A. Stroh, S. Jakirlic, B. Frohnapfel, P. Forooghi

Rotating spherical gap convection in the micro-gravity experiments GeoFlow and AtmoFlow

F. Zaussinger, P. Haun, V. Travnikov, C. Egbers, P. Szabo

Measurement error of tracer-based velocimetry in flow with inhomogeneous refractive indices

H. Li, D. Xu, M. Avila

Kolmogorov’s similarity hypotheses application in research of the turbulent swirl flows in pipe generated by the various axial fan geometries

D. Cantrak, N. Jankovic, M. Nedeljkovic

Application of the One-Dimensional Turbulence model for the evaluation of collection efficiencies in wire-tube electrostatic precipitators

J. A. Medina Mendez, H. Schmidt

Seismic Exploration in Tunneling using Full Waveform Inversion with a Frequency Domain Model

C. Riedel, K. Musayev, M. Baitsch, K. Hackl

A hybrid approach for parametric studies of wave phenomena in multi-layered waveguides with cracks, electrodes and piezoelectric transducers

M. Golub, A. N. Shpak, S. I. Fomenko, O. V. Doroshenko, C. Zhang

Maximizing electromagnetic chirality by means of an asymptotic perturbation formula

M. Knöller

A localized meshless collocation method based on semi-analytical basis functions for bandgap calculation of elastic waves in phononic crystals

Z. Fu, L. Li, Y. Gu

Numerical Analysis of a Levitation Device using High-Order Accurate Methods

T. Gleim, H. Chen

Coarse-graining via EDP-convergence for linear fast-slow reaction-diffusion systems

A. Stephan

On the entropy method for a drift-diffusion model with trap-assisted recombination and self-consistent potential

K. Fellner, M. Kniely

Segregation and Gap Formation in Cross-Diffusion Models

J.-F. Pietschmann, M. Burger, J. A. Carrillo, M. Schmidtchen

Space-Time Sobolev Regularity for the Porous Medium Equation

B. Gess, J. Sauer, E. Tadmor

On the influence of surface roughness on friction-induced oscillations

L. J. Oestringer, C. Proppe

Design of a 3D composite structure considering data uncertainties and various failure mechanisms

M. Drieschner, Y. Petryna, L. Eichner

Stochastic Variational Bayes Estimation for Multi-Site Daily Precipitation Data

R. Majumder, N. K. Neerchal, M. K. Gobbert, A. Mehta

Probability of Hitting the Target with an Imperfectly Manufactured Projectile

Z. Trzun, M. Vrdoljak

The stochastic performance evolution analysis of long span steel arch bridge based on long-term time-varying reliability

M. Xiong

Damage Optimisation for Air Bending

F. Guhr, F.-J. Barthold

Shape optimization of the X0-specimen for biaxial experiments

J. Liedmann, S. Gerke, F.-J. Barthold, M. Brünig

Bounded factor width matrices and sums of k-nomial squares.

M. Saee, J. Gouveia, A. Kovacec

Speedup of three-dimensional global shape optimization in supersonic flow

A. NASTASE

On the Development of a Primal and Continuous Adjoint Computational Model to Minimize Hemolysis in Biomedical Applications

G. Bletsos, N. Kühl, T. Rung

A novel approach for the consideration of plastic material behavior in thermodynamic topology optimization

M. Kick, P. Junker

Solving differential Riccati equations: A nonlinear space-time method using tensor trains

T. Breiten, S. Dolgov, M. Stoll

Roots of multivariate polynomials from tensor decompositions

P. Kürschner, L. De Lathauwer

Distance problems for dissipative Hamiltonian systems and related matrix polynomials

C. Mehl, V. Mehrmann, M. Wojtylak

Parameter estimation for orthogonal polynomial moments

F. Schneppe, D. Lorenz

Structure Preserving Approximation and Integration of Hamiltonian Systems

M.-N. Senn, H. Faßbender

On the efficient solution of large-scale algebraic Riccati equations with banded data

D. Palitta, V. Simoncini

Adaptive spectral Galerkin methods for parabolic evolution problems in space-time FOSLS formulation

T. Raasch

Adaptive Patankar--Runge--Kutta methods

H. Podhaisky, A. Meister, S. Kopecz

An Adaptive FE Solver with Domain Decomposition for the Time Harmonic Maxwell Equations

S. Beuchler, S. Kinnewig, P. König, T. Wick

A polynomial-degree-robust a posteriori error estimator for Nédélec discretizations of magnetostatic problems

J. Gedicke, S. Geevers, I. Perugia, J. Schöberl

A PU localization for space-time goal oriented adaptive refinement for time dependent PDEs

J. P. Thiele, T. Wick

Global and local pointwise error estimates for finite element approximations to the Stokes problem on convex polyhedra

N. Behringer, D. Leykekhman, B. Vexler

The use of goal oriented error estimation for Model Predictive Control

L. Grüne, M. Schaller, A. Schiela

Reliable Finite Element Error Estimates for Optimal Control of Elliptic PDEs with Random Inputs

J. Milz

Coupling Stochastic Gradient Methods with Mesh Refinement for PDE Constrained Optimization under Uncertainty

C. Geiersbach, W. Wollner

Model predictive control with residual-based time adaptivity

A. Alla, C. Gräßle, M. Hinze

Optimal control of pedestrian dynamics

R. Herzog, J. Pietschmann, A. Stötzner, M. Winkler

Impulse free stabilization of switched differential algebraic equations

P. Wijnbergen

The differentiation index of nonlinear differential-algebraic equations versus the relative degree of nonlinear control systems.

Y. Chen, S. Trenn

Asymptotic stability of neutral delay equations via semi-explict time-integration

B. Unger

Symplectic Partitioned Runge-Kutta Methods for High-Order Approximation in Linear-Quadratic Optimal Control of Hamiltonian Systems

M. Herrmann-Wicklmayr, K. Flaßkamp

Realization of port-Hamiltonian systems

K. CHERIFI, V. MEHRMANN

Learning Mechanical Systems by Hamiltonian Neural Networks

E. Dierkes, K. Flaßkamp

Order-p means, M-smoothers, and PDEs

M. Welk

Stochastic level-set segmentation on images with uncertain data

E. Theilen, T. Preusser

Robust PCA via Matrix-Free Regularized Reaper

R. Beinert, G. Steidl

Convergence of Pixel-Driven Projection Methods

R. Huber, K. Bredies

Convolutional Proximal Neural Networks and Plug-and-Play Algorithms

M. Bačák, J. Hertrich, S. Neumayer, G. Steidl

Controlling Neural Networks via Energy Dissipation

M. Moeller, T. Möllenhoff, D. Cremers

Optimizing MGRIT and Parareal coarse-grid operators for linear advection

H. De Sterck, R. D. Falgout, S. Friedhoff, O. A. Krzysik, S. P. MacLachlan

Parareal for coupled differential algebraic equations

I. Cortes Garcia, I. Kulchytska-Ruchka, S. Schöps

Parallel-in-Time Simulation of an Induction Machine using MGRIT

J. Hahne, S. Friedhoff, M. Bolten, S. Schöps

A multigrid preconditioner for an entropy stable Space-Time Discontinuous Galerkin Spectral Element method

L. M. Verbach, P. Birken, G. Gassner

An asynchronous time-integration method for nonlinear structural dynamics and its parallel implementation

A. Seibold, D. Rixen

On Next-Generation Time Stepping Methods for Weather and Climate Simulations

M. Schreiber

L^p Spectrum of Ornstein-Uhlenbeck operators

R. Schnaubelt

The fast-sorption--fast-surface-reaction limit of a heterogeneous catalysis model

B. Augner, D. Bothe

Split-operator algorithm for the Moyal equation. Comparative studies of second and fourth order factorizations

D. T. Kołaczek, B. J. Spisak, M. Wołoszyn, M. Wojtylak

Identification, Modeling and Simulation of Vibration Characteristics of a Painting

Y. Gao, P. Ziegler, P. Eberhard

Improving energy efficiency of bipedal walking using nonlinear compliant mechanisms

Y. Luo, M. Zirkel, U. J. Römer, L. Zentner, A. Fidlin

Consideration of rubber bushings in a multi-body simulation by detailed finite element models

P. Marter, C. Daniel, F. Duvigneau, E. Woschke, D. Juhre

A holistic vibration analysis of an electric engine including mechanical and electrodynamic interactions

S. Koch, F. Duvigneau, E. Woschke

Modelling of dynamic contact forces during orthogonal turn milling

K. Knape, S. Nitzschke, E. Woschke

On the mechanical modeling of cell components

S. Klinge, T. Wiegold, S. Aygün, R. P. Gilbert, G. A. Holzapfel

Computational Modeling of the Passive Vesicle-Mediated Cell Transport

D. C. Haspinger, S. Klinge, G. A. Holzapfel

Extending a pharmacodynamic model for nuclear receptor-induced enzyme production with spatial resolution.

J. Duintjer Tebbens

Vibrational entropy calculation of proteins via kinematic flexibility analysis

X. Chen, S. Leyendecker, H. van den Bedem

Computational modeling of structural degeneration in outer retinal layers due to drusen growth in Dry AMD

V. Holla, J. J. Timothy, L. Strudel, F. Ziemssen, G. Meschke

Rigidity analysis with kino-geometric modeling of active and inactive kinases

X. Chen, S. Leyendecker, H. van den Bedem

Experimental and numerical investigation on the effect of non-proportional load paths on damage and failure behavior in ductile metals

M. Zistl, S. Gerke, M. Brünig

Modeling of wear processes by a regularized damage-plasticity model based on the emulated RVE

G. Hoormazdi, K. Hackl

A comparison between constitutive isotropic and anisotropic plasticity material models for an indentation problem

P. Sridhar, K. de Payrebrune

Plastic incompatibility density as an indicator of forming induced residual stresses

D. Floros, P. Steinmann

Extension of the Local strain approach to transient material behavior and residual stresses

D. Kühne, M. Seiler, P. Hantschke, M. Kästner, M. Fiedler

An artificial intelligence approach to model nonlinear continua by intelligent meta-elements

A. Koeppe, F. Bamer, B. Markert

Reduced order models for material non-linearities in FEM applications

Y. Özmen, L. Scheunemann, P. S. B. Nigro, J. Schröder

Reanalysis for local quantities of interest

D. Materna

Reanalysis of structures with varying cross-sectional values based on influence functions

O. Carl, F. Hartmann, C. Zhang

Stress analysis of a circular hole in an orthotropic plate with finite width using complex potential method

M. Nguyen-Hoang, W. Becker

Comparison of two thermo-mechanically coupled material models in the context of parameter identification

L. Rose, A. Menzel

Energy related thermomechanical material model validation in complex tensile testing with self heating

H. Sparr, R. Roszak, I. Sagradov, D. Schob, M. Ziegenhorn

Unique identification of stiffness parameters for nonlinear, anisotropic textile fabrics based on full-field measurements on a single experiment

L. Makhool, D. Balzani

Phase Field Modeling of Dynamic Surface Wetting informed by Molecular Simulations

F. Diewald, J. Wolf, M. Heier, M. Lautenschläger, S. Stephan, C. Kuhn, K. Langenbach, H. Hasse, R. Müller

Modeling and Simulation of the Aqueous Humor flow with Stokes and Darcy equations

V. Olkhovskiy, E. Friedmann

Numerical simulation of viscoelastic fluid-structure interaction problems coupled to chemical processes in the human eye

A. Drobny, E. Friedmann

An efficient solver for a Cosserat rod of non-constant width applied to a problem of fluid-structure interaction

K. Schoppmann, B. Löhrer, S. Tschisgale, J. Fröhlich

Adsorption in a phase field model for wetting

J. Wolf, F. Diewald, M. Heier, J. Staubauch, K. Langenbach, H. Hasse, R. Müller

A hybrid approach for the multi-scale simulation of irreversible material behavior incorporating neural networks

G. Hütter, A. Malik, M. Abendroth, B. Kiefer

Model Reduction in Thin Deformable Porous Media

A. Z. Armiti-Juber, T. Ricken

On the Computational Homogenization of Deformation-Diffusion Processes

E. Polukhov, M.-A. Keip

Deep material networks - a micromechanical perspective

S. Gajek, M. Schneider, T. Böhlke

Coupled simulation of flow-induced viscous and elastic anisotropy of short-fiber reinforced composites

T. Karl, D. Gatti, B. Frohnapfel, T. Böhlke

On the BFGS method in FFT-based computational micromechanics

D. Wicht, M. Schneider, T. Böhlke

Statistical moments of stresses and strains in random heterogeneous thermoelastic materials

M. Krause, T. Böhlke

Data-driven inverse design of shell-based cellular solids with tailored stiffness and extreme strength

D. M. Kochmann, S. Kumar, C. Portela

FFT-based homogenization using a reduced set of frequencies and a clustered microstructure

J. Waimann, C. Gierden, A. Schmidt, B. Svendsen, S. Reese

HOMOGENIZATION FOR TEXTILES WITH LOOSE CONTACT

R. Falconi, J. Orlik, G. Griso, S. Wackerle

Instability mechanisms in high-Prandtl-number liquid bridges exposed to an ambient gas stream

M. Stojanovic, H. C. Kuhlmann

Stability of obliquely driven cavity flow

P.-E. des Boscs, H. C. Kuhlmann

Linear stability of the asymptotic suction boundary layer flow and new 3D modes

A. Yalcin, M. Oberlack

Travelling waves and low-momentum zones in the asymptotic suction boundary layer

M. Engel, M. Linkmann, H. Knahl, E. Jelli, B. Eckhardt

Interpreted machine learning in fluid dynamics: Explaining relaminarisation events in wall-bounded shear flows

M. Lellep, J. Prexl, B. Eckhardt, M. Linkmann

Thermomagnetic convection in a differentially heated rotating annulus with central force field

P. S. B. Szabo, W.-G. Früh

Can hail and rain nucleate cloud droplet?

S. Weiss

Inclined turbulent convection in low-Prandtl-number fluids

L. Zwirner, O. Shishkina

EHD-enhanced internal forced convection from a One-Dimensional Turbulence perspective

J. A. Medina Méndez, H. Schmidt

Intermittent chaotic flows in the weakly magnetised spherical Couette system

F. Garcia Gonzalez, M. Seilmayer, A. Giesecke, F. Stefani

On the jerky crack growth of elastoplastic materials

R. Toader, G. Dal Maso

Shape differentiability of energy for cracked composite plates

V. Shcherbakov

Optimal amount of thin rigid inclusions for equilibrium problems describing inhomogeneous two-dimensional bodies with a crack

N. Lazarev

Semicoercive hemivariational inequalities in contact mechanics

J. Gwinner

Gamma-convergence for free-discontinuity problems in linear elasticity

M. Friedrich, M. Perugini, F. Solombrino

Asymptotic analysis of composites with rigid fiber-reinforcements

D. Engl, C. Kreisbeck, A. Ritorto

Multilevel Augmented-Lagrangian Methods for Overconstrained Contact Discretizations

M. Weiser, R. Krause

Towards Optimization Techniques on Diffeological Spaces

N. Rathai, K. Welker

Characterization of the topography of an objective function using the Dijkstra algorithm

S. Weiser, H. Wulf, J. Ihlemann

Optimization of sample geometries and loading histories for error-resistant parameter identification

A. V. Shutov, A. A. Kaygorodtseva

On fast iterative methods for radiative transfer

M. Schlottbom

A finite element formulation for a simplified, relaxed micromorphic continuum model

A. Chejanovsky, I. Münch, P. Neff

Galerkin variational integration of the geometrically exact beam via dual quaternion interpolation

R. T. Sato Martín de Almagro, T. Leitz, S. Leyendecker

Learned infinite elements

T. Hohage, C. Lehrenfeld, J. Preuß

On the numerical treatment of Cahn-Hilliard equations with dynamic boundary conditions

S. Metzger

On the computation of physically realizable generalized flat inputs of nonlinear single-output systems from a geometric point of view

K. Fritzsche, Y. Guo, K. Röbenack

A Virtual Sensing approach for approximating nonlinear dynamical systems using LSTM networks

L. Heindel, P. Hantschke, M. Kästner

Nonlinear System Identification of a Furuta Pendulum Using Machine Learning Techniques

T. Rückwald, S. Drücker, D.-A. Dücker, R. Seifried

A random attractor for the TASEP model

L. Grüne, T. Kriecherbauer, M. Margaliot

Formal Calculation of Positive Invariant Sets for the Lorenz Family Combining Lyapunov Approaches and Quantifier Elimination

K. Röbenack

Feedback Methods for Ensemble Reachability of Parameter-Dependent Linear Systems

M. Schoenlein

A robustness measure for singular points in pixelated orientation and vector fields and its application to defect core size estimation

K. B. Hoffmann, I. F. Sbalzarini

Birdsong recognition using Gabor frames

S. Heuer

Uniform recovery guarantees for least squares approximation using random samples

T. Ullrich, L. Kämmerer, T. Volkmer

Universal minimality in total variation regularization

E. Setterqvist, C. Kirisits, O. Scherzer

Image reconstruction from scattered Radon data by weighted kernel functions

K. Albrecht, A. Iske

Learning-informed model meets integrated physics-based method in quantitative MRI

G. Dong, M. Hintermueller, K. Papafitsoros

Combining machine learning and adaptive coarse spaces to design robust and efficient FETI-DP methods

J. Weber, A. Heinlein, A. Klawonn, M. Lanser

Towards multi-fidelity machine learning in scientific computing

P. Zaspel

Data-driven Parameter Identification in Nonlinear Dynamical Systems

R. Pulch, M. Youssef

Deep Learning Classification of Compton Camera Based Prompt Gamma Imaging Data for Proton Radiotherapy

C. A. Barajas, G. Kroiz, M. K. Gobbert, J. Polf

Estimating divergence-free flows via neural networks

D. Kabanov, L. Espath, R. Tempone

Three applications of scale uniform uncertainty relations for Schroedinger equations

I. Veselic

Analysis of the primitive equations with horizontal viscosity

A. Hussein

Recent progress in Functional Calculus

B. Haak

Modelling Porous Media: From Images to Numerical Simulations

H. Steeb

Large scale linear algebra through randomization and communication avoiding techniques

L. Grigori

Effects of hydration in polysaccharide-based aerogel networks

A. Rege, B. Milow

Numerical modeling of the mechanical response of bacterial biofilm to flow by using an SPH poroviscoelastic model

D. Feng, I. Neuweiler, M. Liu, U. Nackenhorst

Development of Electrospun PCL Nanofibrous Tympanic Membrane Scaffolds: Homogenization Modeling and Experimental Verification

Z. Chen, L. Benecke, J. Graetz, M. Hümbert, M. Bornitz, D. Aibibu, C. Cherif, M. Neudert

Simulation and Development of Biomimetic Electro-spun PCL Nanofibrous Tympanic Membrane Implants

Z. Chen, L. Benecke, P. Kempert, T. Stoppe, M. Bornitz, M. Neudert, D. Aibibu, C. Cherif, T. Zahnert

Energy for Brittle Crack Propagation in Crystalline Systems

S. Birang.O, P. Steinmann

Simulation of ductile crack propagation through hard metal microstructures at finite strains by application of an extended eigenerosion framework

D. Wingender, D. Balzani

Simulation of crack propagation without using crack tracking algorithm in the embedded discontinuity model

A. Stanić, B. Brank, A. Ibrahimbegovic, H. G. Matthies

Optimal control of quasi-static crack growth in two-dimensional composite structures using gradient-based material optimization

S. Singh, M. Stingl

Peridynamic analysis of dynamic fracture: Dimensionality and Specimen size

S. N. Butt, G. Meschke

An enhanced algorithmic scheme for relaxed incremental variational damage formulations at finite strains

M. Köhler, T. Neumeier, D. Peterseim, M. Peter, D. Balzani

Evaluation of manufacturing based deviations in composites

C. Willberg, F. Heinecke

Lattice Boltzmann Method for Anti-plane Shear with non-mesh conforming boundary conditions

T. Reinirkens, A. Schlüter, R. Müller, C. Kuhn

Simulation of Plane Strain Problems with the Lattice Boltzmann Method

A. Schlüter, H. Müller, S. Yan, R. Müller

Mixed peridynamic approaches for incompressible materials and finite plasticity

T. Bode, C. Weißenfels, P. Wriggers

Neural network parameter identification based constitutive modeling of superelastic shape memory alloys

A. Kaup, O. Altay, S. Klinkel

A second-gradient continuum formulation for bi-pantographic fabrics

S. R. Eugster, E. Barchiesi

Probabilistic damage simulation for strengthening design of concrete structures

M. Molod, F.-J. Barthold, P. Spyridis

Sightly precurved layered beams with interlayer slip

D. Ladurner, C. Adam, T. Furtmüller

An advanced quadratic displacement approach for the analytical stress analysis of adhesive bonded joints

T. S. Methfessel, W. Becker

Efficient simulation of heterogeneous materials with the finite cell method

M. Gorji, A. Düster

A Thermodynamically Consistent Model for Deformation and Microstructure Evolution in Hot Forming and Heat Treatment

D. Helm, L. Kertsch

Multi-level thermomechanical material modeling to study heterogeneous plastic deformation of DC04 steel and effects of residual stresses on its mechanical properties

S. Ahmed, S. Loehnert, P. Wriggers

Phase field modeling of crack nucleation and propagation in martensitic micro–structures

E. Borzabadi Farahani, D. Juhre

Deformation Analysis of Friction Welded Hybrid Structures

E. Heppner, R. Glüge, M. Weber, E. Woschke

Modeling and simulation of the thermo-mechanical material behavior of an epoxy system in electric traction machines

P. Böckenhoff

Prediction of residual stresses of second kind in deep drawing using an incremental two-scale material model

J. Hofinger, H. Erdle, T. Böhlke

A multiphase model for the cross-linking of ultra high viscous alginate hydrogels

S. Diebels, M. M. Gepp, I. Meiser, M. Roland, F. Starke, H. Zimmermann

Cell enrichment and separation technique using active hydrogel membranes

R. Friebe, D. Gruner, A. Ehrenhofer, A. Richter, T. Wallmersperger

Ritz-type surface homogenization: from atomistic to continuum surface models of Copper despite imperfect bulk models

P. Kurzeja, C. Sievers, L. Brendel, J. Mosler

Simulation of the mechanical in-plane properties of graphene sheets by quasicontinuum (QC) method

Q. Zheng, J. Wackerfuß

Towards first-principles-based updated-Lagrangian non-equilibrium quasicontinuum simulations

P. Gupta, M. Spinola, D. Kochmann

Virtual testing of as-designed additively manufactured lattice structures

U. Gebhardt, M. Kästner, T. Gustmann, J. K. Hufenbach, U. Kühn, F. Hirsch, M. Berner

A micro-mechanically motivated phenomenological yield function for cubic crystal aggregates

A. Dyck, T. Böhlke

Multiscale simulation of 3D beam-lattice metamaterials with second gradient linear elasticity

O. Weeger

Lagrangian transport in two-dimensional time periodic cavity flow

L. Bábor, H. C. Kuhlmann

Particle accumulation in high-Prandtl-number liquid bridges

I. Barmak, H. C. Kuhlmann

Least-squares formulation to solve non-Newtonian fluid flow and application of data assimilation

S. Averweg, A. Schwarz, C. Nisters, J. Schröder

Simultaneous determination of Bingham material parameters using a ball probe concrete rheometer

F. Gerland, T. Schomberg, A. Wetzel, B. Middendorf, O. Wünsch

Numerical simulation of flow processes of wood-polymer composites in extrusion dies

F. Liese, O. Wünsch

Disentangling Lagrangian Turbulence

M. Wilczek

Coarse-grained Lagrangian statistics in turbulent von-Kármán flow

J. Weigel, M. Lellep, D. Schanz, F. Huhn, D. Garaboa Paz, M. Wilczek, M. Linkmann

Global power budgets in turbulent Couette and Poiseuille flows

A. Andreolli, M. Quadrio, B. Frohnapfel, D. Gatti

On symmetry-induced pdf's in turbulence

D. Plümacher, M. Oberlack

Turbulent swirl flow analysis by Kolmogorov hypotheses

D. Cantrak, N. Jankovic, M. Nedeljkovic

Trajectories of Water Particle under the Influence of Interacting Nonlinear Water Waves

M. Hollm, L. Dostal, R. Seifried

Partitioned simulation of the acoustic behavior of flexible marine propellers using finite and boundary elements

L. Radtke, T. Lampe, M. Abdel-Maksoud, A. Düster

Modelling wave propagation in a visco-hyperelastic soft tissue surrogate using the finite element and finite difference method

J. Ohlsen, M. Neidhardt

Measured and simulated examination of the propagation paths of structure-borne sound using the structural intensity for fibre reinforced injection moulded thermoplastic parts.

D. Netzband, A. Ujma, E. Moritzer

Oblique undular hydraulic jumps in turbulent free-surface flows

D. Murschenhofer

Cahn-Hilliard Navier-Stokes Approaches for the Simulation of Immiscible Free-Surface Flows

N. Kühl, M. Hinze, T. Rung

A new volume penalization for strongly compressible flows

J. Reiss, M. Lemke

Parametric Study on Ridges Inducing Secondary Motions in Turbulent Channel Flow

L. H. von Deyn, D. Gatti, B. Frohnapfel, A. Stroh

Investigating Schmidt number effects in turbulent electroconvection using one-dimensional turbulence

M. Klein, H. Schmidt

Actuation of an elastic membrane by the use of an electrorheological valve

T. Schomberg, F. Gerland, M. Rütten, O. Wünsch

Analyzing drug distribution in the aqueous humor flow

E. Friedmann, A. Drobny, S. Dörsam

About two approaches to fracture in a one dimensional toy model

L. Lauerbach, S. Neukamm, M. Schäffner, A. Schlömerkemper

Emergence of Polycrystals from atomistic systems

L. C. Kreutz

A priori estimates for rapidly oscillating finite-energy sequences of Muller's functional with non-coercive two-well potential

A. RAGUZ

On the Motion of Curved Dislocation Lines in Three Dimensions

J. Ginster

Non-isothermal phase separation models and an application to tumor growth

E. Ipocoana, A. Zafferi

Modeling and Analysis of Drug Distribution in the Human Vitreous

J. Stein, E. Friedmann

Continuous Adjoint Complement to the Blasius Equation

N. Kühl, P. M. Müller, T. Rung

Inverse Design Based on Nonlinear Thermoelastic Material Models

F. Zwicke, S. Elgeti

Topology Optimization of Vibrating Structures with Contact

T. Schmidt, A. Held, R. Seifried

A New Hybrid Optimization Technique for Point Clouds Registration

G. G. Yacout Gadallah, M. K. Shoukry

Certified Reduced Basis Methods for Variational Data Assimilation and Optimal Experimental Design

N. Aretz, M. Grepl, K. Veroy-Grepl

Parametric regularity and reduced basis approximation for a fractional Laplace equation

O. Burkovska, M. Gunzburger

A REDUCED ORDER MODEL FOR THE ACOUSTIC SCATTERING OF AN AIRFOIL

F. Bonizzoni, F. Nobile, I. Perugia, D. Pradovera

Adaptive Trust Region Reduced Basis Method in PDE-Constrained Parameter Optimization: A Non-Conforming Dual Approach

S. Banholzer, T. Keil, L. Mechelli, M. Ohlberger, F. Schindler, S. Volkwein

A priori reduced order model of steady Navier-Stokes equations for low Reynolds number

C. Hoareau, L. Shang, A. Zilian

Pressure-robust, non-conforming discretization of the Stokes equations on domains with re-entrant edges

T. Apel, V. Kempf

On pressure-robustness, well-balanced schemes and the spatial discretization of high Reynolds number flows

A. Linke, C. Merdon

A novel gradient-robust, well-balanced discretisation for the compressible isothermal Navier-Stokes problem

C. Merdon, A. Linke

Numerical long-term 3D Finite-Element-Simulations of Drug Spreading in Human Eye

S. Dörsam, E. Friedmann

Discrete Projections: A Step towards Particle Methods without Remeshing

M. Kirchhart, C. Rieger

Improving interpolation in autoencoders using a regularization term

J. Braunsmann, B. Wirth, M. Rumpf, M. Rajković

Deeply Learned Spectral Total Variation Decomposition

T. G. Großmann, Y. Korolev, G. Gilboa, C.-B. Schönlieb

Covariance estimation under one-bit quantization

S. Dirksen, J. Maly, H. Rauhut

A Parallel Matrix-Free Finite Element Solver for Phase Separation in Electrode Particles of Lithium Ion Batteries

F. Castelli, W. Dörfler

Hybrid and Additive Nonlinear Two-Level Schwarz Methods

M. Lanser, A. Heinlein

Three-Level Extensions for Fast and Robust Overlapping Schwarz (FROSch) Preconditioners

F. Röver, A. Heinlein, O. Rheinbach

Exploiting low Precision Accelerator Hardware for Poisson-like problems via Prehandling as Explicit Preconditioning

S. Turek

A domain-based IMEX decomposition strategy for domain-based implicit-explicit (IMEX) type schemes

V. Straub, S. Ortleb

Efficient computation of multiphysics discrete adjoints with SU2

O. Burghardt, N. Gauger

Embeddability of matrices into real and positive semigroups

A. Radl, T. Eisner

Riesz bases of port-Hamiltonian systems

B. Jacob, J. Kaiser, H. Zwart

Pseudospectrum enclosures by discretization

A. Frommer, B. Jacob, L. Vorberg, C. Wyss, I. Zwaan

Beyond the Navier-Stokes equations

J. Málek

An Implicit Discontinuous Galerkin Chimera Method for Unsteady Laminar Flow Problems with Multiple Bodies

F. Genuit, M. Keßler, E. Krämer

Recent applications of the adjoint in nonlinear nonstationary fluid-structure interaction

T. Wick, L. Failer, W. Wollner

Monolithic Newton-multigrid FEM for the simulation of thixotropic flow problems

N. Begum, A. Ouazzi, S. Turek

Parallelization in time for optimal control and inverse problems

S. Götschel

Communication-avoiding TT tensor orthogonalization procedure

H. Al Daas, G. Ballard, P. Benner

Action Principle and Ritz Method for Yarn Dynamics in Ring Spinning

M. Lenz, M. Beitelschmidt

Buckling analysis of shear-deformable orthotropic laminated plates with rotational restraints

P. Schreiber, C. Mittelstedt, M. Beerhorst

Plate theories: A-priori fulfillment of the local conditions by the consistent approximation approach

M. Meyer-Coors, R. Kienzler, P. Schneider

Semi-analytical assessment of free-edge stress fields in circular cylindrical cross-ply laminated shells subjected to transverse loads

A. Kappel, C. Mittelstedt

Approximate computational model for shear loaded stiffened composite panels

J. C. Schilling, C. Mittelstedt

The influence of compatibility equations of non-linear elasticity for non-simply-connected bodies on convergence for spectral method solutions

R. Flajs

Data-Driven simulation of inelastic materials using tangent space information and transition rules based on structured data sets

K. Ciftci, K. Hackl

Constitutive modeling of viscoplasticity including phase transformations for graded thermo-mechanical processing

H. Westermann, A. Reitz, R. Mahnken, O. Grydin, M. Schaper

Plasticity prediction in thermoplastics for aerospace applications with Machine Learning

B. Pi, T. Ricken

Machine-learning based material modeling for anisotropic hyperelasticity at large deformations applied to parametric metamaterials

M. Fernández, M. Jamshidian, T. Böhlke, K. Kersting, F. Fritzen, O. Weeger

Automated constitutive modeling of isotropic hyperelasticity based on artificial neural networks

L. Linden, K. A. Kalina, J. Brummund, P. Metsch, M. Kästner

A coupled chemo-mechanical computational model for phase transformations on deforming surfaces

E. Jagadeesh Savitha, C. Zimmermann, K. K. Mandadapu, R. A. Sauer

Corrosion fatigue – A first simplified combined electrochemical and mechanical damage model.

M. Hofmann, Y. Shi, T. Wallmersperger

On the micromechanical constitutive modelling and finite-element-based simulations of magnetic shape memory alloys using energy relaxation concepts

T. Bartel, B. Kiefer, A. Menzel

Phase field modeling with deformation-dependent interface energies

H. Wilbuer, H. Lammen, J. Mosler

Thermomechanical analysis of actuation mechanism of a microgripper made of photo resist with temperature-dependent thermal expansion

W. Huang, K. de Payrebrune

A potential-based formulation of the classical and relativistic Navier-Stokes equations

M. Scholle, P. H. Gaskell, F. Marner

On the non-uniqueness of marginally separated boundary layer flows

I. Stojanovic, S. Braun

Regularization of the ill-posed spike formation stage in marginally separated boundary layer flows

D. Kuzdas, S. Braun

Stochastic modeling of transient neutral and stably-stratified Ekman boundary layers

M. Klein, R. E. Maier, H. Schmidt

Integral effects of the Debye layer on a sedimenting particle with variant zeta-potentials

P. Marthaler, A. G. Class

Modeling rarefied plasma dynamics in micropropulsion systems for space applications

R. Groll, T. Frieler, C. Kühn

Junction problems for thin inclusions located inside elastic bodies

A. Khludnev, T. Popova

Asymptotic modelling of bonded plates by a soft thin adhesive layer

E. Rudoy

Fatigue and phase transition in an oscillating elastoplastic beam

C. Gavioli, M. Eleuteri, J. Kopfová, P. Krejčí

Separately Global Solutions to Rate-Independent Systems - Applications to Large-Strain Deformations of Damageable Solids

E. Davoli, M. Kružík, P. Pelech

Large Time Existence for Thin Vibrating Rods

H. Abels, T. Ameismeier

Thermo-visco-elasticity at finite strain

A. Mielke

Robust discretization of the Reissner--Mindlin plate with Taylor-Hood FEM

M. Schedensack, D. Gallistl

Mixed FEM for Gradient Elasticity

J. W. Ketteler, M. Schedensack, J. Riesselmann, D. Balzani

Stress-Based Adaptivity for Quasi-Variational Inequalities Associated with Frictional Contact

G. Starke, B. Kober

Boundary Element Preconditioners for the Elasticity Equations

T. Rau, A. Liebel

Space-time stabilized FEM applied on the hyperbolic heat conduction equation for high speed frictional contact

M. C. Feike, P. C. Mundt

Quantum Computing as a Tool for Solving Problems in Mechanics

A. Mielke, T. Ricken

Lattice Boltzmann Methods for Turbulent Flows around Wind Turbines using the Actuator Line Model

H. Schottenhamml, A. Anciaux-Sedrakian, F. Blondel, U. Rüde

IMEX-DG schemes for advection-diffusion using term-based or domain-based IMEX splitting

S. Ortleb

Recent developments in the field of modified Patankar-Runge-Kutta-methods

T. Izgin, S. Kopecz, A. Meister

Model identification coupling Bayesian Inference with PGD reduced models with random field material parameters

A. Robens-Radermacher, I. Coelho Lima, J. F. Unger

Well-posedness of linear first order port-Hamiltonian Systems on multidimensional spatial domains

N. Skrepek

Stability under structured perturbations

B. Jacob, S. Möller, C. Wyss

Approximate robust output regulation of boundary control systems

M. Kurula, J.-P. Humaloja, L. Paunonen

Exotic patterns of Faraday waves

L. S. Tuckerman

Mechanical interfaces and interphases

J. Mosler