|
Session Overview |
|
| ||||
| 10:00am - 4:00pm |
EFCE Meeting Location: L226 |
|||
| 1:00pm - 5:00pm |
Registration Location: Zone 2 - Cafetaria |
|||
| 2:00pm - 5:00pm |
Workshop 1: do-mpc Location: Zone 3 - Room E032 |
Workshop 2: Effective course development Location: Zone 3 - Aula D002 |
Workshop 3: AVEVA Software Location: Zone 3 - Room E031 |
Workshop 4: Biochemical reactors Location: Zone 3 - Room E033 |
| 5:00pm - 6:30pm |
Welcome Reception Location: Zone 2 - Cafetaria |
|||
|
| ||||||||
| 8:00am - 8:30am |
Registration Location: Zone 2 - Cafetaria |
|||||||
| 8:30am - 9:00am |
Opening Session Location: Zone 1 - Aula Louisiane |
|||||||
| 9:00am - 10:00am |
Plenary 1 - Prof. Wolfgang Marquardt - Long-Term Achievement Award (CAPE LTA) Location: Zone 1 - Aula Louisiane Chair: Zdravko Kravanja Co-chair: Jan Van Impe |
|||||||
| 10:00am - 10:30am |
Coffee Break Location: Zone 2 - Cafetaria |
Poster Session 1 Location: Zone 2 - Cafetaria IMPLEMENTATION AND ASSESSMENT OF FRACTIONAL CONTROLLERS FOR AN INTENSIFIED DISTILLATION SYSTEM 1: Universidad de Guanajuato, Mexico; 2: Instituto Tecnológico de Villahermosa, Mexico; 3: Tecnológico Nacional de México en Celaya, Mexico Sustainable pathways toward a decarbonized steel industry 1: University of Cantabria; 2: ETH Zurich OPTIMIZATION OF HEAT EXCHANGERS THROUGH AN ENHANCED METAHEURISTIC STRATEGY: THE SUCCESS-BASED OPTIMIZATION ALGORITHM 1: Universidad Autónoma de Querétaro, Mexico; 2: Universidad de Guanajuato, Mexico; 3: Gheorghe Asachi Technical University of Iasi, Romania OPTIMAL DESIGN OF PROCESS EQUIPMENT THROUGH HYBRID MECHANISTIC-ANN MODELS: EFFECT OF HYBRIDIZATION 1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de Querétaro, México MODELLING OF A PROPYLENGLYCOL PRODUCTION PROCESS WITH ARTIFICIAL NEURAL NETWORKS: OPTIMIZATION OF THE ARCHITECTURE 1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de Querétaro, México Analysis for CFD of the Claus Reaction Furnace with Operating Conditions: Temperature and Excess Air for Sulfur Recovery 1: INSTITUTO POLITECNICO NACIONAL, MEXICO; 2: UNIVERSIDAD VERACRUZANA, MEXICO Numerical Analysis of the Hydrodynamics of Proximity Impellers using the SPH Method 1: TECNOLÓGICO NACIONAL DE MÉXICO/ CAMPUS IRAPUATO, DEPARTAMENTO DE INGENIERÍA QUÍMICA; 2: UNIVERSIDAD DE GUANAJUATO/DEPARTAMENTO DE INGENIERÍA QUÍMICA Surrogate Modeling of Twin-Screw Extruders Using a Recurrent Deep Embedding Network 1: Department of Chemical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan; 2: Industrial Technology Research Institute, Hsinchu 30013, Taiwan Predicting Final Properties in Ibuprofen Production with Variable Batch Durations Department of Chemical Engineering, National Tsing Hua University, Hsinchu 300044, Taiwan Develop a Digital Twin System Based on a Physics-Informed Neural Networks for Pipeline Leakage Detection 1: Department of Chemical Engineering, National Tsing Hua University, Hsinchu 300044, Taiwan; 2: Material and Chemical Research Laboratories, Industrial Technology Research Institute, Hsinchu 310401, Taiwan Higher alcohol = higher value? Identifying Promising and Unpromising Synthesis Routes for 1-Propanol Energy & Process Systems Engineering, Department of Mechanical and Process Engineering, ETH Zürich A Python/Numpy-based package to support model discrimination and identification 1: Department of Industrial Engineering, University of Padova, via Marzolo 9, 35131 Padova PD, Italy; 2: FLSmidth Cement, Green Innovation, Denmark Experiences in Teaching Statistics and Data Science to Chemical Engineering Students at the University of Wisconsin-Madison UNIVERSITY OF WISCONSIN-MADISON, United States of America Rule-based autocorrection of Piping and Instrumentation Diagrams (P&IDs) on graphs 1: Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, The Netherlands; 2: Fluor BV, Amsterdam, The Netherlands Deposition rate constants: a DPM approach for particles in pipe flow University of Huddersfield, United Kingdom Plate heat exchangers: a CFD study on the effect of dimple shape on heat transfer University of Huddersfield, United Kingdom Modeling and life cycle assessment for ammonia cracking process Kwangwoon University, Korea, Republic of (South Korea) Technoeconomic Analysis of a Methanol Conversion Process Using Microwave-Assisted Dry Reforming and Chemical Looping West Virginia University, United States of America A Techno-enviro-economic Transparency of a Coal-fired Power Plant: Integrating Biomass Co-firing and CO2 Sequestration Technology in a Carbon-priced Environment 1: Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Kuala Lumpur; 2: Department of Chemical Engineering, Imperial College London, SW7 2AZ, United Kingdom; 3: Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Kuala Lumpur Methodology for multi-actor and multi-scale decision support for Water-Food-Energy systems 1: Laboratoire de Génie Chimique, UMR 5503 CNRS, Toulouse INP, UPS, 4 Allée Emile Monso, 31432 Toulouse Cedex 4, France; 2: UMR 1121 LAE INRAE- Université de Lorraine – ENSAIA, 54000 Nancy, France Synergies of Adaptive Learning for Surrogate-Based Flowsheet Model Maintenance 1: MOL Group Plc.; 2: Faculty of Engineering, University of Pannonia Comparison of Prior Mean and Multi-Fidelity Bayesian Optimization of a Hydroformylation Reactor Process Systems Engineering, RWTH Aachen University, Germany A global sensitivity analysis for a bipolar membrane electrodialysis capturing carbon dioxide from the air 1: Department of Mechanical, Chemical and Materials Engineering, University of Cagliari, via Marengo 2, 09123 Cagliari, Italy , Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, London SW7 2AZ, UK; 2: Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, London SW7 2AZ, UK Refrigerant Selection and Cycle Design for Industrial Heat Pump Applications exemplified for Distillation Processes Hamburg University of Technology, Institute of Process System Engineering, Germany CO2 conversion to polyethylene based on power-to-X technology and renewable resources 1: Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova ulica 17, 2000 Maribor, Slovenia; 2: Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, Hajdrihova 19, Ljubljana 1001, Slovenia; 3: Sustainable Process Integration Laboratory, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic; 4: Environmental Change Institute, University of Oxford, Oxford OX1 3QY, United Kingdom Design of Experiments Algorithm for Comprehensive Exploration and Rapid Optimization in Chemical Space 1: Shizuoka university, Japan; 2: University of shizuoka, Japan; 3: Osaka university, Japan; 4: Graduate School of Pharmaceutical Sciences, Osaka University, Japan; 5: Suez Canal University, Egypt Surrogate Modeling for Real-Time Simulation of Spatially Distributed Dynamically Operated Chemical Reactors: A Power-to-X Case Study 1: Max Planck Institute for Dynamics of Complex Technical Systems, Sandtorstraße 1, Magdeburg, 39106, Germany; 2: Helmholtz Centre for Environmental Research, Permoserstraße 15, Leipzig, 04318 , Germany; 3: Otto von Guericke University Magdeburg, Universitaetsplatz 2, Magdeburg, 39106, Germany Computer Vision for Chemical Engineering Diagrams McMaster University, Canada Digital Twin for Operator Training- and Real-Time Support for a Pilot Scale Packed Batch Distillation Column PROSYS DTU, Denmark Hybridizing Neural Networks with Physical Laws for Advanced Process Modeling in Chemical Engineering INP Toulouse, France Transferring Graph Neural Networks for Soft Sensor Modeling using Process Topologies 1: Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands; 2: Product and Process Engineering, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands Production scheduling based on Real-time Optimization and Zone Control Nonlinear Model Predictive Controller 1: KU Leuven, Belgium; 2: YPFB Refinación S.A. Talking like Piping and Instrumentation Diagrams (P&IDs) Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands Multi-Objective Optimization and Analytical Hierarchical Process for Sustainable Power Generation Alternatives in the High Mountain Region of Santurbán: case of Pamplona, Colombia 1: Department of Chemical Engineering, Carrera 27 Calle 9, Universidad Industrial de Santander, Bucaramanga, Colombia; 2: Department of Chemical Engineering, Cl. 5 No. 3-93, Kilometro 1 Vía Bucaramanga, Universidad de Pamplona, Norte de Santander, Colombia Environmental assessment of the catalytic Arabinose oxidation a Laboratory of Industrial Chemistry and Reaction Engineering (TKR), Johan Gadolin Process Chemistry Centre, Åbo Akademi University, Åbo-Turku FI-20500, Finland A FOREST BIOMASS-TO-HYDROCARBON SUPPLY CHAIN MATHEMATICAL MODEL FOR OPTIMIZING CARBON EMISSIONS AND ECONOMIC METRICS 1: Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada (UNC-CONICET), Universidad Nacional de Córdoba. Facultad de Ciencias Exactas, Físicas y Naturales. Av. Vélez Sarsfield 1611, X5016GCA Ciudad Universitaria, Córdoba, Argentina; 2: Department of Chemical Engineering, Carnegie Mellon University, 5000 Forbes Ave, Pittsburgh PA 15213; 3: Departamento de Bioingeniería, Facultad de Ingeniería, Universidad de la Republica, Julio Herrera y Reissig 565, Montevideo, Uruguay. Introducing competition in a multi-agent system for hybrid optimization University College London, United Kingdom A Component Property Modeling Framework Utilizing Molecular Similarity for Accurate Predictions and Uncertainty Quantification Zhejiang University, China, People's Republic of A simple model for control and optimisation of a produced water re-injection facility 1: Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway; 2: Subsea Technology, AkerBP ASA, Stavanger, Norway An optimization-based conceptual synthesis of reaction-separation systems for glucose to chemicals conversion. Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, 00076 Aalto, Finland. Kinetic modeling of drug substance synthesis considering slug flow characteristics in a liquid-liquid reaction 1: The University of Tokyo, Japan; 2: Shionogi Pharma Co., Ltd., Japan Learning-based control approach for nanobody-scorpion antivenom optimization 1: TBI, Université de Toulouse, CNRS UMR5504, INRAE UMR792, INSA, Toulouse, France, France; 2: Laboratoire des Biomolécules, Venins et Applications Théranostiques (LBVAT), Institut Pasteur de Tunis, 13 Place Pasteur, BP-74, 1002 Le Belvédère, Tunis, Tunisia; 3: Athena Research Center, Marousi, Greece; 4: School of Chemical Engineering, National Technical University of Athens, Iroon Polytechneiou 9, Zografou, 15780 Athens, Greece Kinetics modeling of the thermal degradation of densified refuse-derived fuel (d-RDF) Institute of Chemical and Environmental Engineering, Slovak University of Technology in Bratislava, Slovak Republic Cost-optimal solvent selection for batch cooling crystallisation of flurbiprofen University of Edinburgh, United Kingdom A Machine Learning (ML) implementation for beer fermentation optimisation University of Edinburgh, United Kingdom Operability analysis of modular heterogeneous electrolyzer plants using system co-simulation 1: TUD Dresden University of Technology, Chair of Process Control Systems; 2: TUD Dresden University of Technology, Process Systems Engineering Group; 3: TUD Dresden University of Technology, Process-to-Order Lab High-pressure membrane reactor for ammonia decomposition: Modeling, simulation and scale-up using a Python-Aspen Custom Modeler interface Universidade de São Paulo, Brazil Developing a circular economy around jam production wastes Department of Chemical Engineering. Universidad de Salamanca, Plz Caídos 1-5, 37008, Salamanca, Spain Data-driven optimization of chemical dosage in wastewater treatment: A surrogate model approach for enhanced physicochemical phosphorus removal 1: Biotechnological Processes for the Environment Group, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 2: Chemical & Process Systems Engineering Group, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 3: Heterogeneous Computing Laboratory, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 4: Programa de Engenharia Química/COPPE, Universidade Federal do Rio de Janeiro, Cidade Universitária, CP: 68502, Rio de Janeiro, 21941-972 RJ, Brazil Leveraging Machine Learning for Real-Time Performance Prediction of Near Infrared Separators in Waste Sorting Plant 1: TUD Dresden University of Technology, Chair of Process Control Systems; 2: TUD Dresden University of Technology, Process Systems Engineering Group A Benchmark Simulation Model of Ammonia Production: Enabling Safe Innovation in the Emerging Renewable Hydrogen Economy Process and Systems Engineering Center (PROSYS), Department of Chemical and Biochemical Engineering, Technical University of Denmark (DTU), 2800 Kgs.Lyngby, Denmark Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis Paderborn University, Germany Modular and Heterogeneous Electrolysis Systems: a System Flexibility Comparison 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Process to Order Lab; 3: TUD Dresden University of Technology, Chair of Process Control Systems CFD-Based Shape Optimization of Structured Packings for Enhancing Separation Efficiency in Distillation 1: Fraunhofer ITWM, Germany; 2: Ulm University, Germany Multi-Model Predictive Control of a Distillation Column 1: Gaziantep Islam Science and Technology University, Gaziantep 27010, Turkey; 2: Faculty of Engineering, Burapha University, Chonburi 20131, Thailand; 3: Slovak University of Technology in Bratislava, Bratislava 81237, Slovakia Enhancing Fault diagnosis for Chemical Processes via MSCNN with Hyperparameters Optimization and Uncertainty Estimation Process and Systems Engineering Center (PROSYS), Department of Chemical and Biochemical Engineering, Technical University of Denmark Machine learning-aided identification of flavor compounds with green notes in plant-based foods BioTeC+, Chemical and Biochemical Process Technology and Control, Department of Chemical Engineering, KU Leuven, Ghent, Belgium LSTMs and nonlinear State Space Models- are they the same? McMaster University, Canada Simple Regulatory Control Structure for Proton Exchange Membrane Water Electrolysis Systems Norwegian University of Science and Technology, Norway Solid streams modelling for process integration of an EAF steel plant. Luxembourg Institute of Science and Technology (LIST), Luxembourg Design of Microfluidic Mixers using Bayesian Shape Optimization CERES, Department of Chemical Engineering, University of Coimbra, Portugal Solubility prediction of lipid compounds using machine learning 1: Grupo de Ingeniería de Sistemas Químicos y de Procesos, Instituto de Ingeniería Química, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay; 2: Heterogenoeus Computing Laboratory, Instituto de Computación, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay Refining Equation-Based Model Building for Practical Applications in Process Industry Kyoto University, Japan Solar Desalination and Porphyrin Mediated Vis-Light Photocatalysis in Decolouration of Dyes as Biological Analogues Applied in Advanced Water Treatment University of Pretoria, South Africa Diagnosing Faults in Wastewater Systems: A Data-Driven Approach to Handle Imbalanced Big Data 1: Shiraz University, Iran, Islamic Republic of; 2: Technical University of Denmark (DTU), Denmark Industrial Time Series Forecasting for Fluid Catalytic Cracking Process 1: Department of Chemical Engineering, Tsinghua University, Beijing 100084, China; 2: PetroChina Planning & Engineering Institute, Beijing 100083, China Electrochemical conversion of CO2 into CO. Analysis of the influence of the electrolyzer type, operating parameters, and separation stage 1: Institute of Bioeconomy, University of Valladolid, Spain; 2: The Sargent Centre for Process Systems Engineering, Imperial College, UK; 3: I-X Centre for AI in Science, Imperial College, UK; 4: Department of Chemistry, Stephenson Institute for Renewable Energy, University of Liverpool, UK Enhancing Pharmaceutical Development: Process Modelling and Control Strategy Optimization for Liquids Drug Products Multiphase Mixing and Milling Processes Johnson & Johnson Innovative Medicine, Belgium Assessing operational resilience within the natural gas monetisation network for enhanced production risk management: Qatar as a case study Hamad Bin Khalifa University, Qatar Membrane-based Blue Hydrogen Production in Sub-Ambient Temperature: Process Optimization, Techno-Economic Analysis and Life Cycle Assessment 1: Chonnam National University, Korea, Republic of (South Korea); 2: Sunchon National University, Korea, Republic of (South Korea) Dynamic Life Cycle Assessment in Continuous Biomanufacturing 1: Institute of Chemical, Environmental and Bioscience Engineering TU Wien,1060 Wien, Austria; 2: Department of Chemical and Biochemical Engineering, Søltofts Plads, Building 228A, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark Multi-level modeling of reverse osmosis process based on CFD results Chonnam National University, Korea, Republic of (South Korea) Optimal system design and scheduling for ammonia production from renewables under uncertainty: Stochastic programming vs. robust optimization 1: Max Planck Institute for Dynamics of Complex Technical Systems, Department of Process Systems Engineering, Sandtorstr. 1, 39106 Magdeburg, Germany; 2: Otto von Guericke University, Chair for Process Systems Engineering, Universitätsplatz 2, 39106 Magdeburg, Germany CO2 Sequestration and Valorization to Synthetic Fuels: Multi-criteria Based Process Design and Optimization for Feasibility National Institute of Advanced Industrial Science and Technology, Japan Leveraging Pilot-scale Data for Real-Time Analysis of Ion Exchange Chromatography Technical University of Denmark, Denmark Model Based Flowsheet Studies on Cement Clinker Production Processes 1: Siemens Industry Software Limited, 26-28 Hammersmith Grove, W6 7HA London, United Kingdom; 2: CAPE-Lab (Computer-Aided Process Engineering Laboratory), Department of Industrial Engineering, University of Padova, 35131 Padova PD, Italy A Social Life Cycle Assessment for Sustainable Pharmaceutical Supply Chains Centre for Management Studies of IST (CEG-IST), University of Lisbon, Portugal Quantum Computing for Synthetic Bioprocess Data Generation and Time-Series Forecasting 1: Sqale; 2: Denmark Technical University Optimising Crop Schedules and Environmental Impact in Climate-Controlled Greenhouses: A Hydroponics vs. Soil-Based Food Production Case Study Hamad bin Khalifa University, Qatar Technological Trends towards Sustainable and Circular Process Design Departamento de Procesos y Tecnología, Universidad Autónoma Metropolitana-Cuajimalpa, Mexico From experiment design to data-driven modeling of powder compaction process 1: RPTU Kaiserslautern, Germany; 2: TU Dortmund, Germany Taking into account social aspects for the development of industrial ecology Laboratoire de Genie Chimique, Toulouse INP, CNRS, Université Paul Sabatier, France Life cycle impacts characterization of carbon capture technologies for their integration in eco-industrial parks Laboratoire de Genie Chimique, Toulouse INP, CNRS, Université Paul Sabatier, France Dynamic simulation and life cycle assessment of energy storage systems connecting variable renewable sources with regional energy demand The University of Tokyo, Japan Optimisation of carbon capture utilisation and storage supply chains under carbon trading and taxation The Sargent Centre for Process Systems Engineering, Department of Chemical Engineering,University College London (UCL), Torrington Place, London WC1E 7JE, UK Impact of energy sources on Global Warming Potential of hydrogen production: Case study of Uruguay 1: Unidad Tecnológica de Energias Renovables, Universidad Tecnologica del Uruguay; 2: Depto. de Bioingeniería, Instituto de Ingeniería Química, Facultad de Ingeniería, Udelar; 3: Instituto de Ingeniería Química, Facultad de Ingeniería, Udelar Impact of the share of renewable energy integration in the selection of sustainable natural gas production pathways Ecole Polytechnique Federale de Lausanne, Switzerland Decarbonizing the German Aviation Sector: Assessing the feasibility of E-Fuels and their environmental implications 1: Universidad Industrial de Santander-UIS, Colombia; 2: Technical University of Munich-TUM, Germany Solar-Driven Hydrogen Economy Potential in the Greater Middle East: Geographic, Economic, and Environmental Perspectives 1: Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 11000, FI-00076 Aalto, Finland; 2: Department of Chemistry & Chemical Engineering, SBA School of Science and Engineering, Lahore University of Management Sciences (LUMS), Lahore, 54792, Pakistan; 3: Department of Chemical Engineering, Pukyong National University, Busan, Republic of Korea |
||||||
| 10:30am - 11:30am |
Brewery visit Location: On-campus brewery |
|||||||
| 10:30am - 12:30pm |
T1: Modelling and Simulation - Session 1 Location: Zone 3 - Aula E036 Chair: Simen Akkermans Computational Intelligence Applied to the Mathematical Modeling of the Esterification of Fatty Acids with Sugars Universidade Federal de São Carlos, Brazil 10:50am - 11:10am Data-Driven Modelling of Biogas Production Using Multi-Task Gaussian Processes 1: School of Chemistry and Chemical Engineering, University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.; 2: Supergen Bioenergy Impact Hub, Energy and Bioproducts Research Institute, UK. 11:10am - 11:30am Integration of Yield Gradient Information in Numerical Modeling of the Fluid Catalytic Cracking Process 1: Department of Chemical Engineering, Tsinghua University, Beijing 100084, China; 2: PetroChina Guangxi Petrochemical Company, Qinzhou 535000, China 11:30am - 11:50am Hybrid Modelling for Reaction Network Simulation in Syngas Methanol Production University of Manchester, United Kingdom 11:50am - 12:10pm Data-driven joint chance-constrained optimization via copulas: Application to MINLP integrated planning and scheduling 1: University College London, UK; 2: University of Connecticut, USA; 3: University of Wisconsin-Madison, USA 12:10pm - 12:30pm Integrating Thermodynamic Simulation and Surrogate Modeling to Find Optimal Drive Cycle Strategies for Hydrogen-Powered Trucks 1: Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Garching, 85748, Germany; 2: Cryomotive GmbH, Grasbrunn, 85630, Germany |
T2: Sustainable Product Development and Process Design - Sesson 1 Location: Zone 3 - Aula D002 Chair: Sujit Jogwar Co-chair: Zdravko Kravanja Desing and Planning of the Green Hydrogen Supply Chain (GHSC), considering resources availability and evolving hydrogen demand over time: The Portuguese Industrial Sector 1: Centre for Management Studies (CEG-IST) , Instituto Superior Técnico, University of Lisbon; 2: Centre for Management Studies (CEG-IST) , Instituto Superior Técnico, University of Lisbon; 3: Department of Environment and Planning, Centre for Environmental and Marine Studies (CESAM), University of Aveiro; 4: Industrial Innovation Centre of Galp, Lisbon 10:50am - 11:10am Techno-Economic and Environmental Analysis of Biomethane Production from Sewage Sludge in Hydrothermal Gasification Process EPFL, Switzerland 11:10am - 11:30am System scale design and mesoscale modeling for natural gas dehydration process 1: School of Chemical Engineering, Sichuan University, Chengdu 610065, PR China; 2: School of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, PR China 11:30am - 11:50am Superstructure optimization of chemical reaction networks uncovers synergies between chemical processes Institute for Chemical and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zurich, Switzerland 11:50am - 12:10pm Conceptual design of energy storage systems for continuous operations in renewable-powered chemical processes 1: Politecnico di Milano, Italy; 2: Casale SA, Switzerland |
T3: Large Scale Design and Planning/ Scheduling - Including keynote Location: Zone 3 - Room E030 Co-chair: Marianne Boix Keynote: Joint Optimization of Fair Facility Allocation and Robust Inventory Management for Perishable Consumer Products Oklahoma State University, United States of America 11:10am - 11:30am Integrating Time-Varying Environmental Indicators into an Energy Systems Modeling and Optimization Framework for Enhanced Sustainability 1: Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, TX, USA; 2: Texas A&M Energy Institute, Texas A&M University, College Station, TX, USA; 3: Shell Global Solutions International B.V., Amsterdam, Netherlands; 4: Shell Global Solutions International B.V., Houston, TX, USA 11:30am - 11:50am Integrating Carbon Value Vectors in the Energy and Materials Transition Nexus: A Case Study on Mobility Optimization 1: Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, TX, USA; 2: Texas A&M Energy Institute, Texas A&M University, College Station, TX, USA 11:50am - 12:10pm Flow Simulation of Plastic Life Cycle Considering Carbon Renewability and Environmental Impact 1: Department of Chemical System Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan; 2: Presidential Endowed Chair for “Platinum Society”, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan; 3: Institute for Future Initiatives, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8654, Japan |
T4: Model Based optimisation and advanced Control - Session 1 Location: Zone 3 - Room E031 Chair: Antonio Espuña Co-chair: Miroslav Fikar Efficient approximation of the Koopman operator for large-scale nonlinear systems 1: University of Manchester, United Kingdom; 2: University of Bangor, United Kingdom 10:50am - 11:10am Enhancing Consumer Engagement in Plastic Waste Reduction：A Stackelberg Game Approach 1: Brno University of Technology, Czech Republic; 2: University of Oxford,United Kingdom; 3: University of Maribor, Slovenia; 4: Széchenyi István University, Hungary 11:10am - 11:30am A decomposition approach to feasibility for decentralized operation of multi-stage processes Imperial College London, United Kingdom 11:30am - 11:50am Safe Bayesian Optimization in Process Systems Engineering Imperial College London, United Kingdom 11:50am - 12:10pm Combined Flexibility and Resilience-aware Design Optimization of Process Systems Using Multi-Parametric Programming 1: Artie McFerrin Department of Chemical Engineering, Texas A&M University, 3122 TAMU, 100 Spence St., College Station, TX 77843, USA; 2: Texas A&M Energy Institute, Texas A&M University, College Station, TX, 77843, USA; 3: Gas and Fuels Research Center, Texas A&M Engineering Experiment Station, College Station, USA; 4: Department of Multidisciplinary Engineering, Texas A&M University, College Station, USA; 5: Department of Engineering Technology and Industrial Distribution, Texas A&M University, College Station, USA 12:10pm - 12:30pm Optimization-Based Methodology for the Design of a Pulsed Fusion Power Plant using a Dynamic Model 1: Sargent CPSE, Department of Chemical Engineering, UCL, Torrington Place, London, WC1E 7JE, UK; 2: Department of Mechanical Engineering, UCL, Torrington Place, London, WC1E 7JE, UK; 3: United Kingdom Atomic Energy Authority, Culham Science Centre, Abingdon, OX14 3DB, UK |
T5: Concepts, Methods and Tools - Session 1 Location: Zone 3 - Room E032 AutoJSA: A Knowledge-Enhanced Large Language Model Framework for Improving Job Safety Analysis Tsinghua University, China, People's Republic of 10:50am - 11:10am Phenomena-Based Graph Representations and Applications to Chemical Process Simulation 1: University of Wisconsin Madison, United States of America; 2: University of Wisconsin Madison, United States of America 11:10am - 11:30am Systematic comparison between Graph Neural Networks and UNIFAC-IL for solvent pre-selection in liquid-liquid extraction 1: Max Planck Institute for Dynamics of Complex Technical Systems, Germany; 2: Otto von Guericke University 11:30am - 11:50am Optimizing Individual-based Modelling: A Grid- based Approach to Computationally Efficient Microbial Simulations KU Leuven, Belgium 11:50am - 12:10pm A Framework Utilizing a Seamless Integration of Python with AspenPlus® for a Multi-Criteria Process Evaluation German Aerospace Center (DLR), Germany 12:10pm - 12:30pm Global Robust Optimisation for Non-Convex Quadratic Programs: Application to Pooling Problems The Sargent Centre for Process Systems Engineering, Department of Chemical Engineering,University College London, United Kingdom |
T6: Digitalization and AI - Keynote Location: Zone 3 - Room E033 Chair: Filip Logist Co-chair: Manabu Kano Keynote by BASF: Beyond the hype. How to create impact with digital innovation in chemical production. BASF 11:10am - 11:30am Exploring industrial text data for monitoring chemical manufacturing processes 1: Univ Coimbra, CERES, Department of Chemical Engineering, Rua Sílvio Lima, Pólo II – Pinhal de Marrocos, 3030-790 Coimbra, Portugal; 2: The Dow Chemical Company, Lake Jackson, USA 11:30am - 11:50am Text2Model: Generating dynamic chemical reactor models using large language models Delft University of Technology, Department of Chemical Engineering, Process Intelligence Research Group, Van der Maasweg 9, 2629 HZ, Delft, The Netherlands 11:50am - 12:10pm Multi-Agent LLMs for Automating Sustainable Operational Decision-Making Imperial College London, United Kingdom |
T7: CAPEing with Societal Challenges - Session 1 Location: Zone 3 - Room D016 Co-chair: Ryan Muir Waste heat upgrading from alkaline and PEM electrolyzers using heat pumps 1: Department of Chemical Engineering, KU Leuven, 3001 Leuven, Belgium; 2: EnergyVille, 3600 Genk, Belgium 10:50am - 11:10am Model-based Operability and Safety Optimization for PEM Water Electrolysis 1: Department of Chemical and Biomedical Engineering, West Virginia University, Morgantown, WV, USA; 2: Texas A&M Energy Institute, Texas A&M University, College Station, TX, USA; 3: Mary Kay O’Connor Process Safety Center (MKOPSC), Texas A&M University, College Station, TX, USA; 4: Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, TX, USA 11:10am - 11:30am Modelling and Analysis of CO2 Electrolysers Integrated with Downstream Separation Processes via Heat Pumps Delft University of Technology, Netherlands, The 11:30am - 11:50am A Data-Driven Conceptual Approach to Heat Pump Sizing in Chemical Processes with Fluctuating Heat Supply and Demand 1: Ruhr University Bochum, Germany; 2: Paderborn University, Germany 11:50am - 12:10pm Evaluating Energy Transition Pathways for CO2 Reduction in Industries with Low-Temperature Heat Demand: A Superstructure Optimization Approach 1: Chemical Engineering, University of Liège, Liège Sart Tilman, 4000, Belgium.; 2: Federal Polytechnic School of Lausanne, IPESE group, Sion, Switzerland. |
T10: PSE4BioMedical and (Bio)Pharma - Session 1 Location: Zone 3 - Room D049 Chair: Yusuke Hayashi Co-chair: Prashant Mhaskar Modeling the Impact of Non-Ideal Mixing on Continuous Crystallization: A Non-Dimensional Approach University of Chemistry and Technology, Prague, Czech Republic 10:50am - 11:10am Process Design of an Industrial Crystallization Based on Degree of Agglomeration 1: Purdue University, United States of America; 2: Process Engineering and Technology, SMPD, Takeda, Cambridge, MA 11:10am - 11:30am Developing a Solvent Selection Framework to Recover Active Pharmaceutical Ingredients from Unused Solid Drugs 1: Davison School of Chemical Engineering, Purdue University, West Lafayette, IN,United States of America; 2: Agricultural & Biological Engineering, Purdue University, West Lafayette, IN, United States of America 11:30am - 11:50am Data-driven Digital Design of Pharmaceutical Crystallization Processes 1: Purdue University, United States of America; 2: Takeda Pharmaceuticals International Company, United States of America 11:50am - 12:10pm Bayesian Optimization for Enhancing Spherical Crystallization Derived from Emulsions: A Case Study on Ibuprofen 1: State Key Laboratory of Industrial Control Technology, College of Control Science and Engineering, Zhejiang University, Hangzhou 310027, China; 2: College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China 12:10pm - 12:30pm Model-based approach to template-induced macromolecule crystallisation 1: Department of Chemical Engineering, Imperial College London, London, SW7 2AZ; 2: Sargent Centre for Process Systems Engineering, Imperial College London, London, SW7 2AZ; 3: Institute for Molecular Science and Engineering, Department of Chemical Engineering, Imperial College London, London, SW7 2AZ; 4: Chemical Development, Pharmaceutical Technology & Development, Operations, AstraZeneca, Macclesfield, SK10 2NA |
| 12:30pm - 1:30pm |
Eurecha Meeting - for Eurecha members only Location: L226 |
|||||||
| 12:30pm - 2:30pm |
Lunch Location: Zone 2 - Cafetaria |
|||||||
| 1:20pm - 2:30pm |
Poster Session 1 Location: Zone 2 - Cafetaria IMPLEMENTATION AND ASSESSMENT OF FRACTIONAL CONTROLLERS FOR AN INTENSIFIED DISTILLATION SYSTEM 1: Universidad de Guanajuato, Mexico; 2: Instituto Tecnológico de Villahermosa, Mexico; 3: Tecnológico Nacional de México en Celaya, Mexico Sustainable pathways toward a decarbonized steel industry 1: University of Cantabria; 2: ETH Zurich OPTIMIZATION OF HEAT EXCHANGERS THROUGH AN ENHANCED METAHEURISTIC STRATEGY: THE SUCCESS-BASED OPTIMIZATION ALGORITHM 1: Universidad Autónoma de Querétaro, Mexico; 2: Universidad de Guanajuato, Mexico; 3: Gheorghe Asachi Technical University of Iasi, Romania OPTIMAL DESIGN OF PROCESS EQUIPMENT THROUGH HYBRID MECHANISTIC-ANN MODELS: EFFECT OF HYBRIDIZATION 1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de Querétaro, México MODELLING OF A PROPYLENGLYCOL PRODUCTION PROCESS WITH ARTIFICIAL NEURAL NETWORKS: OPTIMIZATION OF THE ARCHITECTURE 1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de Querétaro, México Analysis for CFD of the Claus Reaction Furnace with Operating Conditions: Temperature and Excess Air for Sulfur Recovery 1: INSTITUTO POLITECNICO NACIONAL, MEXICO; 2: UNIVERSIDAD VERACRUZANA, MEXICO Numerical Analysis of the Hydrodynamics of Proximity Impellers using the SPH Method 1: TECNOLÓGICO NACIONAL DE MÉXICO/ CAMPUS IRAPUATO, DEPARTAMENTO DE INGENIERÍA QUÍMICA; 2: UNIVERSIDAD DE GUANAJUATO/DEPARTAMENTO DE INGENIERÍA QUÍMICA Surrogate Modeling of Twin-Screw Extruders Using a Recurrent Deep Embedding Network 1: Department of Chemical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan; 2: Industrial Technology Research Institute, Hsinchu 30013, Taiwan Predicting Final Properties in Ibuprofen Production with Variable Batch Durations Department of Chemical Engineering, National Tsing Hua University, Hsinchu 300044, Taiwan Develop a Digital Twin System Based on a Physics-Informed Neural Networks for Pipeline Leakage Detection 1: Department of Chemical Engineering, National Tsing Hua University, Hsinchu 300044, Taiwan; 2: Material and Chemical Research Laboratories, Industrial Technology Research Institute, Hsinchu 310401, Taiwan Higher alcohol = higher value? Identifying Promising and Unpromising Synthesis Routes for 1-Propanol Energy & Process Systems Engineering, Department of Mechanical and Process Engineering, ETH Zürich A Python/Numpy-based package to support model discrimination and identification 1: Department of Industrial Engineering, University of Padova, via Marzolo 9, 35131 Padova PD, Italy; 2: FLSmidth Cement, Green Innovation, Denmark Experiences in Teaching Statistics and Data Science to Chemical Engineering Students at the University of Wisconsin-Madison UNIVERSITY OF WISCONSIN-MADISON, United States of America Rule-based autocorrection of Piping and Instrumentation Diagrams (P&IDs) on graphs 1: Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, The Netherlands; 2: Fluor BV, Amsterdam, The Netherlands Deposition rate constants: a DPM approach for particles in pipe flow University of Huddersfield, United Kingdom Plate heat exchangers: a CFD study on the effect of dimple shape on heat transfer University of Huddersfield, United Kingdom Modeling and life cycle assessment for ammonia cracking process Kwangwoon University, Korea, Republic of (South Korea) Technoeconomic Analysis of a Methanol Conversion Process Using Microwave-Assisted Dry Reforming and Chemical Looping West Virginia University, United States of America A Techno-enviro-economic Transparency of a Coal-fired Power Plant: Integrating Biomass Co-firing and CO2 Sequestration Technology in a Carbon-priced Environment 1: Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Kuala Lumpur; 2: Department of Chemical Engineering, Imperial College London, SW7 2AZ, United Kingdom; 3: Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Kuala Lumpur Methodology for multi-actor and multi-scale decision support for Water-Food-Energy systems 1: Laboratoire de Génie Chimique, UMR 5503 CNRS, Toulouse INP, UPS, 4 Allée Emile Monso, 31432 Toulouse Cedex 4, France; 2: UMR 1121 LAE INRAE- Université de Lorraine – ENSAIA, 54000 Nancy, France Synergies of Adaptive Learning for Surrogate-Based Flowsheet Model Maintenance 1: MOL Group Plc.; 2: Faculty of Engineering, University of Pannonia Comparison of Prior Mean and Multi-Fidelity Bayesian Optimization of a Hydroformylation Reactor Process Systems Engineering, RWTH Aachen University, Germany A global sensitivity analysis for a bipolar membrane electrodialysis capturing carbon dioxide from the air 1: Department of Mechanical, Chemical and Materials Engineering, University of Cagliari, via Marengo 2, 09123 Cagliari, Italy , Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, London SW7 2AZ, UK; 2: Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, London SW7 2AZ, UK Refrigerant Selection and Cycle Design for Industrial Heat Pump Applications exemplified for Distillation Processes Hamburg University of Technology, Institute of Process System Engineering, Germany CO2 conversion to polyethylene based on power-to-X technology and renewable resources 1: Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova ulica 17, 2000 Maribor, Slovenia; 2: Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, Hajdrihova 19, Ljubljana 1001, Slovenia; 3: Sustainable Process Integration Laboratory, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic; 4: Environmental Change Institute, University of Oxford, Oxford OX1 3QY, United Kingdom Design of Experiments Algorithm for Comprehensive Exploration and Rapid Optimization in Chemical Space 1: Shizuoka university, Japan; 2: University of shizuoka, Japan; 3: Osaka university, Japan; 4: Graduate School of Pharmaceutical Sciences, Osaka University, Japan; 5: Suez Canal University, Egypt Surrogate Modeling for Real-Time Simulation of Spatially Distributed Dynamically Operated Chemical Reactors: A Power-to-X Case Study 1: Max Planck Institute for Dynamics of Complex Technical Systems, Sandtorstraße 1, Magdeburg, 39106, Germany; 2: Helmholtz Centre for Environmental Research, Permoserstraße 15, Leipzig, 04318 , Germany; 3: Otto von Guericke University Magdeburg, Universitaetsplatz 2, Magdeburg, 39106, Germany Computer Vision for Chemical Engineering Diagrams McMaster University, Canada Digital Twin for Operator Training- and Real-Time Support for a Pilot Scale Packed Batch Distillation Column PROSYS DTU, Denmark Hybridizing Neural Networks with Physical Laws for Advanced Process Modeling in Chemical Engineering INP Toulouse, France Transferring Graph Neural Networks for Soft Sensor Modeling using Process Topologies 1: Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands; 2: Product and Process Engineering, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands Production scheduling based on Real-time Optimization and Zone Control Nonlinear Model Predictive Controller 1: KU Leuven, Belgium; 2: YPFB Refinación S.A. Talking like Piping and Instrumentation Diagrams (P&IDs) Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands Multi-Objective Optimization and Analytical Hierarchical Process for Sustainable Power Generation Alternatives in the High Mountain Region of Santurbán: case of Pamplona, Colombia 1: Department of Chemical Engineering, Carrera 27 Calle 9, Universidad Industrial de Santander, Bucaramanga, Colombia; 2: Department of Chemical Engineering, Cl. 5 No. 3-93, Kilometro 1 Vía Bucaramanga, Universidad de Pamplona, Norte de Santander, Colombia Environmental assessment of the catalytic Arabinose oxidation a Laboratory of Industrial Chemistry and Reaction Engineering (TKR), Johan Gadolin Process Chemistry Centre, Åbo Akademi University, Åbo-Turku FI-20500, Finland A FOREST BIOMASS-TO-HYDROCARBON SUPPLY CHAIN MATHEMATICAL MODEL FOR OPTIMIZING CARBON EMISSIONS AND ECONOMIC METRICS 1: Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada (UNC-CONICET), Universidad Nacional de Córdoba. Facultad de Ciencias Exactas, Físicas y Naturales. Av. Vélez Sarsfield 1611, X5016GCA Ciudad Universitaria, Córdoba, Argentina; 2: Department of Chemical Engineering, Carnegie Mellon University, 5000 Forbes Ave, Pittsburgh PA 15213; 3: Departamento de Bioingeniería, Facultad de Ingeniería, Universidad de la Republica, Julio Herrera y Reissig 565, Montevideo, Uruguay. Introducing competition in a multi-agent system for hybrid optimization University College London, United Kingdom A Component Property Modeling Framework Utilizing Molecular Similarity for Accurate Predictions and Uncertainty Quantification Zhejiang University, China, People's Republic of A simple model for control and optimisation of a produced water re-injection facility 1: Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway; 2: Subsea Technology, AkerBP ASA, Stavanger, Norway An optimization-based conceptual synthesis of reaction-separation systems for glucose to chemicals conversion. Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, 00076 Aalto, Finland. Kinetic modeling of drug substance synthesis considering slug flow characteristics in a liquid-liquid reaction 1: The University of Tokyo, Japan; 2: Shionogi Pharma Co., Ltd., Japan Learning-based control approach for nanobody-scorpion antivenom optimization 1: TBI, Université de Toulouse, CNRS UMR5504, INRAE UMR792, INSA, Toulouse, France, France; 2: Laboratoire des Biomolécules, Venins et Applications Théranostiques (LBVAT), Institut Pasteur de Tunis, 13 Place Pasteur, BP-74, 1002 Le Belvédère, Tunis, Tunisia; 3: Athena Research Center, Marousi, Greece; 4: School of Chemical Engineering, National Technical University of Athens, Iroon Polytechneiou 9, Zografou, 15780 Athens, Greece Kinetics modeling of the thermal degradation of densified refuse-derived fuel (d-RDF) Institute of Chemical and Environmental Engineering, Slovak University of Technology in Bratislava, Slovak Republic Cost-optimal solvent selection for batch cooling crystallisation of flurbiprofen University of Edinburgh, United Kingdom A Machine Learning (ML) implementation for beer fermentation optimisation University of Edinburgh, United Kingdom Operability analysis of modular heterogeneous electrolyzer plants using system co-simulation 1: TUD Dresden University of Technology, Chair of Process Control Systems; 2: TUD Dresden University of Technology, Process Systems Engineering Group; 3: TUD Dresden University of Technology, Process-to-Order Lab High-pressure membrane reactor for ammonia decomposition: Modeling, simulation and scale-up using a Python-Aspen Custom Modeler interface Universidade de São Paulo, Brazil Developing a circular economy around jam production wastes Department of Chemical Engineering. Universidad de Salamanca, Plz Caídos 1-5, 37008, Salamanca, Spain Data-driven optimization of chemical dosage in wastewater treatment: A surrogate model approach for enhanced physicochemical phosphorus removal 1: Biotechnological Processes for the Environment Group, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 2: Chemical & Process Systems Engineering Group, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 3: Heterogeneous Computing Laboratory, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 4: Programa de Engenharia Química/COPPE, Universidade Federal do Rio de Janeiro, Cidade Universitária, CP: 68502, Rio de Janeiro, 21941-972 RJ, Brazil Leveraging Machine Learning for Real-Time Performance Prediction of Near Infrared Separators in Waste Sorting Plant 1: TUD Dresden University of Technology, Chair of Process Control Systems; 2: TUD Dresden University of Technology, Process Systems Engineering Group A Benchmark Simulation Model of Ammonia Production: Enabling Safe Innovation in the Emerging Renewable Hydrogen Economy Process and Systems Engineering Center (PROSYS), Department of Chemical and Biochemical Engineering, Technical University of Denmark (DTU), 2800 Kgs.Lyngby, Denmark Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis Paderborn University, Germany Modular and Heterogeneous Electrolysis Systems: a System Flexibility Comparison 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Process to Order Lab; 3: TUD Dresden University of Technology, Chair of Process Control Systems CFD-Based Shape Optimization of Structured Packings for Enhancing Separation Efficiency in Distillation 1: Fraunhofer ITWM, Germany; 2: Ulm University, Germany Multi-Model Predictive Control of a Distillation Column 1: Gaziantep Islam Science and Technology University, Gaziantep 27010, Turkey; 2: Faculty of Engineering, Burapha University, Chonburi 20131, Thailand; 3: Slovak University of Technology in Bratislava, Bratislava 81237, Slovakia Enhancing Fault diagnosis for Chemical Processes via MSCNN with Hyperparameters Optimization and Uncertainty Estimation Process and Systems Engineering Center (PROSYS), Department of Chemical and Biochemical Engineering, Technical University of Denmark Machine learning-aided identification of flavor compounds with green notes in plant-based foods BioTeC+, Chemical and Biochemical Process Technology and Control, Department of Chemical Engineering, KU Leuven, Ghent, Belgium LSTMs and nonlinear State Space Models- are they the same? McMaster University, Canada Simple Regulatory Control Structure for Proton Exchange Membrane Water Electrolysis Systems Norwegian University of Science and Technology, Norway Solid streams modelling for process integration of an EAF steel plant. Luxembourg Institute of Science and Technology (LIST), Luxembourg Design of Microfluidic Mixers using Bayesian Shape Optimization CERES, Department of Chemical Engineering, University of Coimbra, Portugal Solubility prediction of lipid compounds using machine learning 1: Grupo de Ingeniería de Sistemas Químicos y de Procesos, Instituto de Ingeniería Química, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay; 2: Heterogenoeus Computing Laboratory, Instituto de Computación, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay Refining Equation-Based Model Building for Practical Applications in Process Industry Kyoto University, Japan Solar Desalination and Porphyrin Mediated Vis-Light Photocatalysis in Decolouration of Dyes as Biological Analogues Applied in Advanced Water Treatment University of Pretoria, South Africa Diagnosing Faults in Wastewater Systems: A Data-Driven Approach to Handle Imbalanced Big Data 1: Shiraz University, Iran, Islamic Republic of; 2: Technical University of Denmark (DTU), Denmark Industrial Time Series Forecasting for Fluid Catalytic Cracking Process 1: Department of Chemical Engineering, Tsinghua University, Beijing 100084, China; 2: PetroChina Planning & Engineering Institute, Beijing 100083, China Electrochemical conversion of CO2 into CO. Analysis of the influence of the electrolyzer type, operating parameters, and separation stage 1: Institute of Bioeconomy, University of Valladolid, Spain; 2: The Sargent Centre for Process Systems Engineering, Imperial College, UK; 3: I-X Centre for AI in Science, Imperial College, UK; 4: Department of Chemistry, Stephenson Institute for Renewable Energy, University of Liverpool, UK Enhancing Pharmaceutical Development: Process Modelling and Control Strategy Optimization for Liquids Drug Products Multiphase Mixing and Milling Processes Johnson & Johnson Innovative Medicine, Belgium Assessing operational resilience within the natural gas monetisation network for enhanced production risk management: Qatar as a case study Hamad Bin Khalifa University, Qatar Membrane-based Blue Hydrogen Production in Sub-Ambient Temperature: Process Optimization, Techno-Economic Analysis and Life Cycle Assessment 1: Chonnam National University, Korea, Republic of (South Korea); 2: Sunchon National University, Korea, Republic of (South Korea) Dynamic Life Cycle Assessment in Continuous Biomanufacturing 1: Institute of Chemical, Environmental and Bioscience Engineering TU Wien,1060 Wien, Austria; 2: Department of Chemical and Biochemical Engineering, Søltofts Plads, Building 228A, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark Multi-level modeling of reverse osmosis process based on CFD results Chonnam National University, Korea, Republic of (South Korea) Optimal system design and scheduling for ammonia production from renewables under uncertainty: Stochastic programming vs. robust optimization 1: Max Planck Institute for Dynamics of Complex Technical Systems, Department of Process Systems Engineering, Sandtorstr. 1, 39106 Magdeburg, Germany; 2: Otto von Guericke University, Chair for Process Systems Engineering, Universitätsplatz 2, 39106 Magdeburg, Germany CO2 Sequestration and Valorization to Synthetic Fuels: Multi-criteria Based Process Design and Optimization for Feasibility National Institute of Advanced Industrial Science and Technology, Japan Leveraging Pilot-scale Data for Real-Time Analysis of Ion Exchange Chromatography Technical University of Denmark, Denmark Model Based Flowsheet Studies on Cement Clinker Production Processes 1: Siemens Industry Software Limited, 26-28 Hammersmith Grove, W6 7HA London, United Kingdom; 2: CAPE-Lab (Computer-Aided Process Engineering Laboratory), Department of Industrial Engineering, University of Padova, 35131 Padova PD, Italy A Social Life Cycle Assessment for Sustainable Pharmaceutical Supply Chains Centre for Management Studies of IST (CEG-IST), University of Lisbon, Portugal Quantum Computing for Synthetic Bioprocess Data Generation and Time-Series Forecasting 1: Sqale; 2: Denmark Technical University Optimising Crop Schedules and Environmental Impact in Climate-Controlled Greenhouses: A Hydroponics vs. Soil-Based Food Production Case Study Hamad bin Khalifa University, Qatar Technological Trends towards Sustainable and Circular Process Design Departamento de Procesos y Tecnología, Universidad Autónoma Metropolitana-Cuajimalpa, Mexico From experiment design to data-driven modeling of powder compaction process 1: RPTU Kaiserslautern, Germany; 2: TU Dortmund, Germany Taking into account social aspects for the development of industrial ecology Laboratoire de Genie Chimique, Toulouse INP, CNRS, Université Paul Sabatier, France Life cycle impacts characterization of carbon capture technologies for their integration in eco-industrial parks Laboratoire de Genie Chimique, Toulouse INP, CNRS, Université Paul Sabatier, France Dynamic simulation and life cycle assessment of energy storage systems connecting variable renewable sources with regional energy demand The University of Tokyo, Japan Optimisation of carbon capture utilisation and storage supply chains under carbon trading and taxation The Sargent Centre for Process Systems Engineering, Department of Chemical Engineering,University College London (UCL), Torrington Place, London WC1E 7JE, UK Impact of energy sources on Global Warming Potential of hydrogen production: Case study of Uruguay 1: Unidad Tecnológica de Energias Renovables, Universidad Tecnologica del Uruguay; 2: Depto. de Bioingeniería, Instituto de Ingeniería Química, Facultad de Ingeniería, Udelar; 3: Instituto de Ingeniería Química, Facultad de Ingeniería, Udelar Impact of the share of renewable energy integration in the selection of sustainable natural gas production pathways Ecole Polytechnique Federale de Lausanne, Switzerland Decarbonizing the German Aviation Sector: Assessing the feasibility of E-Fuels and their environmental implications 1: Universidad Industrial de Santander-UIS, Colombia; 2: Technical University of Munich-TUM, Germany Solar-Driven Hydrogen Economy Potential in the Greater Middle East: Geographic, Economic, and Environmental Perspectives 1: Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 11000, FI-00076 Aalto, Finland; 2: Department of Chemistry & Chemical Engineering, SBA School of Science and Engineering, Lahore University of Management Sciences (LUMS), Lahore, 54792, Pakistan; 3: Department of Chemical Engineering, Pukyong National University, Busan, Republic of Korea |
|||||||
| 2:00pm - 3:00pm |
Brewery visit Location: On-campus brewery |
|||||||
| 2:30pm - 3:30pm |
T1: Modelling and Simulation - Session 2 Location: Zone 3 - Aula D002 Chair: Antonios Armaou Co-chair: Monika Polanska Synthesis of Liquid Mixture Separation Networks Using Multi-Material Membranes 1: Department of Chemical and Biological Engineering, Princeton University, United States; 2: Andlinger Center for Energy and Environment, Princeton University, United States 2:50pm - 3:10pm Modelling Internal Diffusion of Pb(II) Adsorption onto Reclaimed Mine Water Sludge (RMWS): A Step Towards Circular Economy Applications University of Pretoria, South Africa |
T2: Sustainable Product Development and Process Design - Session 2 Location: Zone 3 - Room E030 Co-chair: Jose Antonio Abarca Integrating Chemical Recycling into Brownfield Processes: Waste Polyethylene Pyrolysis and Naphtha Steam Cracking TU Delft, Netherlands, The 2:50pm - 3:10pm A System-Dynamics Based Approach for Modeling Circular Economy Networks: Application to the Polyethylene Terephthalate (PET) supply chain Carnegie Mellon University, United States of America 3:10pm - 3:30pm The Role of Industrial Symbiosis in Plastic Waste Recycling to achieve Circularity 1: Universitat Rovira i Virgili, Spain; 2: Delft University of Technology, Netherlands |
T4: Model Based optimisation and advanced Control - Session 2 Location: Zone 3 - Room E032 Co-chair: Flavio Manenti Physics-based mechanistic modelling and dynamic adaptive multi-objective optimization of chemical reactors for CO2 capture based on enhanced weathering University of Surrey, United Kingdom 2:50pm - 3:10pm Optimisation of a Haber-Bosch Synthesis Loop for PtA 1: Technical University of Denmark, Denmark; 2: Norwegian University of Science and Technology, Norway |
T5: Concepts, Methods and Tools - Session 2 Location: Zone 3 - Room E033 Chair: Eike Cramer Co-chair: Artur Schweidtmann Bayesian uncertainty quantification for molecular property prediction with graph neural networks 1: Process Intelligence Research Team, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands; 2: Department of Imaging Physics, Delft University of Technology, Delft, the Netherlands; 3: Pattern Recognition and Bioinformatics, Department of Intelligent Systems, Delft University of Technology, Van Mourik Broekmanweg 6, 2628 XE Delft, The Netherlands 2:50pm - 3:10pm Enhanced Reinforcement Learning-driven Process Design via Quantum Machine Learning 1: Department of Chemical and Biomedical Engineering, West Virginia University, Morgantown, WV, United States; 2: Smith School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, NY, United States 3:10pm - 3:30pm Solving Complex Combinatorial Optimization Problems Using Quantum Annealing Approaches FG Prozess, und Anlagentechnik, Brandenburgische Technische Universität Cottbus-Senftenberg Burger Chaussee 2, D-03044, Cottbus, Germany |
T7: CAPEing with Societal Challenges - Keynote: Process integration for industry decarbonization: Enabling a shared database of ex-ante models of industrial processes, decarbonization technologies and energy systems featuring sustainability metrics Location: Zone 3 - Room D049 Chair: Henrique Matos Co-chair: Léonard Grégoire Keynote by Daniel Florez Orrego EPFL |
T8: CAPE Education and Knowledge Transfer - Including keynote by JMP Location: Zone 3 - Room E031 Chair: Antonio Espuña Keynote by JMP |
T9: PSE4Food and Biochemical - Session 1 Location: Zone 3 - Room D016 Chair: Ihab Hashem Multi-Dimensional Singular Value Decomposition of Scale-Varying CFD Data: Analyzing Scale-Up Effects in Fermentation Processes 1: CERES, Department of Chemical Engineering, University of Coimbra, R. Sílvio Lima, 3030-790 Coimbra; 2: Biotrend SA, Biocant Park Núcleo 04, Lote 2, 3060-197 Cantanhede, Portugal 2:50pm - 3:10pm CFD Simulations of Mixing Dynamics and Photobioreaction Kinetics in Miniature Bioreactors under Transitional Flow Regimes. 1: Department of Chemical Engineering, The University of Manchester, United Kingdom; 2: Department of Chemical Engineering, University of Stellenbosch, South Africa; 3: Department of Chemical Engineering, Dedan Kimathi University of Technology, Kenya 3:10pm - 3:30pm A Dynamic CFD Model to Replicate Real-Time Dynamics in Commercial Storage Unit of Chicory Roots KU Leuven, Belgium |
T10: PSE4BioMedical and (Bio)Pharma - Session 2 Location: Zone 3 - Aula E036 Chair: Zoltan Nagy Co-chair: Domenica Braile A hybrid-modeling approach to monoclonal antibody production process design using automated bioreactor equipment 1: Department of Chemical System Engineering, The University of Tokyo, Japan; 2: Tech & Biz Development Division, Chitose Laboratory Co., Ltd., Japan 2:50pm - 3:10pm Model Predictive Control to Avoid Oxygen Limitations in Microbial Cultivations - A Comparative Simulation Study DTU, Denmark 3:10pm - 3:30pm Improving drug solubility prediction in in-vitro intestinal fluids through hybrid modelling strategies 1: CAPE-Lab – Computer-Aided Process Engineering Laboratory, Department of Industrial Engineering, University of Padova, via Marzolo, 9 - 35131, Padova, PD, Italy; 2: GlaxoSmithKline, Park Road, Ware SG12 0DP, United Kingdom |
| 3:30pm - 4:00pm |
Coffee Break Location: Zone 2 - Cafetaria |
Poster session 1 Location: Zone 2 - Cafetaria IMPLEMENTATION AND ASSESSMENT OF FRACTIONAL CONTROLLERS FOR AN INTENSIFIED DISTILLATION SYSTEM 1: Universidad de Guanajuato, Mexico; 2: Instituto Tecnológico de Villahermosa, Mexico; 3: Tecnológico Nacional de México en Celaya, Mexico Sustainable pathways toward a decarbonized steel industry 1: University of Cantabria; 2: ETH Zurich OPTIMIZATION OF HEAT EXCHANGERS THROUGH AN ENHANCED METAHEURISTIC STRATEGY: THE SUCCESS-BASED OPTIMIZATION ALGORITHM 1: Universidad Autónoma de Querétaro, Mexico; 2: Universidad de Guanajuato, Mexico; 3: Gheorghe Asachi Technical University of Iasi, Romania OPTIMAL DESIGN OF PROCESS EQUIPMENT THROUGH HYBRID MECHANISTIC-ANN MODELS: EFFECT OF HYBRIDIZATION 1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de Querétaro, México MODELLING OF A PROPYLENGLYCOL PRODUCTION PROCESS WITH ARTIFICIAL NEURAL NETWORKS: OPTIMIZATION OF THE ARCHITECTURE 1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de Querétaro, México Analysis for CFD of the Claus Reaction Furnace with Operating Conditions: Temperature and Excess Air for Sulfur Recovery 1: INSTITUTO POLITECNICO NACIONAL, MEXICO; 2: UNIVERSIDAD VERACRUZANA, MEXICO Numerical Analysis of the Hydrodynamics of Proximity Impellers using the SPH Method 1: TECNOLÓGICO NACIONAL DE MÉXICO/ CAMPUS IRAPUATO, DEPARTAMENTO DE INGENIERÍA QUÍMICA; 2: UNIVERSIDAD DE GUANAJUATO/DEPARTAMENTO DE INGENIERÍA QUÍMICA Surrogate Modeling of Twin-Screw Extruders Using a Recurrent Deep Embedding Network 1: Department of Chemical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan; 2: Industrial Technology Research Institute, Hsinchu 30013, Taiwan Predicting Final Properties in Ibuprofen Production with Variable Batch Durations Department of Chemical Engineering, National Tsing Hua University, Hsinchu 300044, Taiwan Develop a Digital Twin System Based on a Physics-Informed Neural Networks for Pipeline Leakage Detection 1: Department of Chemical Engineering, National Tsing Hua University, Hsinchu 300044, Taiwan; 2: Material and Chemical Research Laboratories, Industrial Technology Research Institute, Hsinchu 310401, Taiwan Higher alcohol = higher value? Identifying Promising and Unpromising Synthesis Routes for 1-Propanol Energy & Process Systems Engineering, Department of Mechanical and Process Engineering, ETH Zürich A Python/Numpy-based package to support model discrimination and identification 1: Department of Industrial Engineering, University of Padova, via Marzolo 9, 35131 Padova PD, Italy; 2: FLSmidth Cement, Green Innovation, Denmark Experiences in Teaching Statistics and Data Science to Chemical Engineering Students at the University of Wisconsin-Madison UNIVERSITY OF WISCONSIN-MADISON, United States of America Rule-based autocorrection of Piping and Instrumentation Diagrams (P&IDs) on graphs 1: Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, The Netherlands; 2: Fluor BV, Amsterdam, The Netherlands Deposition rate constants: a DPM approach for particles in pipe flow University of Huddersfield, United Kingdom Plate heat exchangers: a CFD study on the effect of dimple shape on heat transfer University of Huddersfield, United Kingdom Modeling and life cycle assessment for ammonia cracking process Kwangwoon University, Korea, Republic of (South Korea) Technoeconomic Analysis of a Methanol Conversion Process Using Microwave-Assisted Dry Reforming and Chemical Looping West Virginia University, United States of America A Techno-enviro-economic Transparency of a Coal-fired Power Plant: Integrating Biomass Co-firing and CO2 Sequestration Technology in a Carbon-priced Environment 1: Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Kuala Lumpur; 2: Department of Chemical Engineering, Imperial College London, SW7 2AZ, United Kingdom; 3: Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Kuala Lumpur Methodology for multi-actor and multi-scale decision support for Water-Food-Energy systems 1: Laboratoire de Génie Chimique, UMR 5503 CNRS, Toulouse INP, UPS, 4 Allée Emile Monso, 31432 Toulouse Cedex 4, France; 2: UMR 1121 LAE INRAE- Université de Lorraine – ENSAIA, 54000 Nancy, France Synergies of Adaptive Learning for Surrogate-Based Flowsheet Model Maintenance 1: MOL Group Plc.; 2: Faculty of Engineering, University of Pannonia Comparison of Prior Mean and Multi-Fidelity Bayesian Optimization of a Hydroformylation Reactor Process Systems Engineering, RWTH Aachen University, Germany A global sensitivity analysis for a bipolar membrane electrodialysis capturing carbon dioxide from the air 1: Department of Mechanical, Chemical and Materials Engineering, University of Cagliari, via Marengo 2, 09123 Cagliari, Italy , Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, London SW7 2AZ, UK; 2: Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, London SW7 2AZ, UK Refrigerant Selection and Cycle Design for Industrial Heat Pump Applications exemplified for Distillation Processes Hamburg University of Technology, Institute of Process System Engineering, Germany CO2 conversion to polyethylene based on power-to-X technology and renewable resources 1: Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova ulica 17, 2000 Maribor, Slovenia; 2: Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, Hajdrihova 19, Ljubljana 1001, Slovenia; 3: Sustainable Process Integration Laboratory, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic; 4: Environmental Change Institute, University of Oxford, Oxford OX1 3QY, United Kingdom Design of Experiments Algorithm for Comprehensive Exploration and Rapid Optimization in Chemical Space 1: Shizuoka university, Japan; 2: University of shizuoka, Japan; 3: Osaka university, Japan; 4: Graduate School of Pharmaceutical Sciences, Osaka University, Japan; 5: Suez Canal University, Egypt Surrogate Modeling for Real-Time Simulation of Spatially Distributed Dynamically Operated Chemical Reactors: A Power-to-X Case Study 1: Max Planck Institute for Dynamics of Complex Technical Systems, Sandtorstraße 1, Magdeburg, 39106, Germany; 2: Helmholtz Centre for Environmental Research, Permoserstraße 15, Leipzig, 04318 , Germany; 3: Otto von Guericke University Magdeburg, Universitaetsplatz 2, Magdeburg, 39106, Germany Computer Vision for Chemical Engineering Diagrams McMaster University, Canada Digital Twin for Operator Training- and Real-Time Support for a Pilot Scale Packed Batch Distillation Column PROSYS DTU, Denmark Hybridizing Neural Networks with Physical Laws for Advanced Process Modeling in Chemical Engineering INP Toulouse, France Transferring Graph Neural Networks for Soft Sensor Modeling using Process Topologies 1: Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands; 2: Product and Process Engineering, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands Production scheduling based on Real-time Optimization and Zone Control Nonlinear Model Predictive Controller 1: KU Leuven, Belgium; 2: YPFB Refinación S.A. Talking like Piping and Instrumentation Diagrams (P&IDs) Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands Multi-Objective Optimization and Analytical Hierarchical Process for Sustainable Power Generation Alternatives in the High Mountain Region of Santurbán: case of Pamplona, Colombia 1: Department of Chemical Engineering, Carrera 27 Calle 9, Universidad Industrial de Santander, Bucaramanga, Colombia; 2: Department of Chemical Engineering, Cl. 5 No. 3-93, Kilometro 1 Vía Bucaramanga, Universidad de Pamplona, Norte de Santander, Colombia Environmental assessment of the catalytic Arabinose oxidation a Laboratory of Industrial Chemistry and Reaction Engineering (TKR), Johan Gadolin Process Chemistry Centre, Åbo Akademi University, Åbo-Turku FI-20500, Finland A FOREST BIOMASS-TO-HYDROCARBON SUPPLY CHAIN MATHEMATICAL MODEL FOR OPTIMIZING CARBON EMISSIONS AND ECONOMIC METRICS 1: Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada (UNC-CONICET), Universidad Nacional de Córdoba. Facultad de Ciencias Exactas, Físicas y Naturales. Av. Vélez Sarsfield 1611, X5016GCA Ciudad Universitaria, Córdoba, Argentina; 2: Department of Chemical Engineering, Carnegie Mellon University, 5000 Forbes Ave, Pittsburgh PA 15213; 3: Departamento de Bioingeniería, Facultad de Ingeniería, Universidad de la Republica, Julio Herrera y Reissig 565, Montevideo, Uruguay. Introducing competition in a multi-agent system for hybrid optimization University College London, United Kingdom A Component Property Modeling Framework Utilizing Molecular Similarity for Accurate Predictions and Uncertainty Quantification Zhejiang University, China, People's Republic of A simple model for control and optimisation of a produced water re-injection facility 1: Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway; 2: Subsea Technology, AkerBP ASA, Stavanger, Norway An optimization-based conceptual synthesis of reaction-separation systems for glucose to chemicals conversion. Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, 00076 Aalto, Finland. Kinetic modeling of drug substance synthesis considering slug flow characteristics in a liquid-liquid reaction 1: The University of Tokyo, Japan; 2: Shionogi Pharma Co., Ltd., Japan Learning-based control approach for nanobody-scorpion antivenom optimization 1: TBI, Université de Toulouse, CNRS UMR5504, INRAE UMR792, INSA, Toulouse, France, France; 2: Laboratoire des Biomolécules, Venins et Applications Théranostiques (LBVAT), Institut Pasteur de Tunis, 13 Place Pasteur, BP-74, 1002 Le Belvédère, Tunis, Tunisia; 3: Athena Research Center, Marousi, Greece; 4: School of Chemical Engineering, National Technical University of Athens, Iroon Polytechneiou 9, Zografou, 15780 Athens, Greece Kinetics modeling of the thermal degradation of densified refuse-derived fuel (d-RDF) Institute of Chemical and Environmental Engineering, Slovak University of Technology in Bratislava, Slovak Republic Cost-optimal solvent selection for batch cooling crystallisation of flurbiprofen University of Edinburgh, United Kingdom A Machine Learning (ML) implementation for beer fermentation optimisation University of Edinburgh, United Kingdom Operability analysis of modular heterogeneous electrolyzer plants using system co-simulation 1: TUD Dresden University of Technology, Chair of Process Control Systems; 2: TUD Dresden University of Technology, Process Systems Engineering Group; 3: TUD Dresden University of Technology, Process-to-Order Lab High-pressure membrane reactor for ammonia decomposition: Modeling, simulation and scale-up using a Python-Aspen Custom Modeler interface Universidade de São Paulo, Brazil Developing a circular economy around jam production wastes Department of Chemical Engineering. Universidad de Salamanca, Plz Caídos 1-5, 37008, Salamanca, Spain Data-driven optimization of chemical dosage in wastewater treatment: A surrogate model approach for enhanced physicochemical phosphorus removal 1: Biotechnological Processes for the Environment Group, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 2: Chemical & Process Systems Engineering Group, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 3: Heterogeneous Computing Laboratory, Faculty of Engineering, Universidad de la República, Montevideo, Uruguay, 11300; 4: Programa de Engenharia Química/COPPE, Universidade Federal do Rio de Janeiro, Cidade Universitária, CP: 68502, Rio de Janeiro, 21941-972 RJ, Brazil Leveraging Machine Learning for Real-Time Performance Prediction of Near Infrared Separators in Waste Sorting Plant 1: TUD Dresden University of Technology, Chair of Process Control Systems; 2: TUD Dresden University of Technology, Process Systems Engineering Group A Benchmark Simulation Model of Ammonia Production: Enabling Safe Innovation in the Emerging Renewable Hydrogen Economy Process and Systems Engineering Center (PROSYS), Department of Chemical and Biochemical Engineering, Technical University of Denmark (DTU), 2800 Kgs.Lyngby, Denmark Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis Paderborn University, Germany Modular and Heterogeneous Electrolysis Systems: a System Flexibility Comparison 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Process to Order Lab; 3: TUD Dresden University of Technology, Chair of Process Control Systems CFD-Based Shape Optimization of Structured Packings for Enhancing Separation Efficiency in Distillation 1: Fraunhofer ITWM, Germany; 2: Ulm University, Germany Multi-Model Predictive Control of a Distillation Column 1: Gaziantep Islam Science and Technology University, Gaziantep 27010, Turkey; 2: Faculty of Engineering, Burapha University, Chonburi 20131, Thailand; 3: Slovak University of Technology in Bratislava, Bratislava 81237, Slovakia Enhancing Fault diagnosis for Chemical Processes via MSCNN with Hyperparameters Optimization and Uncertainty Estimation Process and Systems Engineering Center (PROSYS), Department of Chemical and Biochemical Engineering, Technical University of Denmark Machine learning-aided identification of flavor compounds with green notes in plant-based foods BioTeC+, Chemical and Biochemical Process Technology and Control, Department of Chemical Engineering, KU Leuven, Ghent, Belgium LSTMs and nonlinear State Space Models- are they the same? McMaster University, Canada Simple Regulatory Control Structure for Proton Exchange Membrane Water Electrolysis Systems Norwegian University of Science and Technology, Norway Solid streams modelling for process integration of an EAF steel plant. Luxembourg Institute of Science and Technology (LIST), Luxembourg Design of Microfluidic Mixers using Bayesian Shape Optimization CERES, Department of Chemical Engineering, University of Coimbra, Portugal Solubility prediction of lipid compounds using machine learning 1: Grupo de Ingeniería de Sistemas Químicos y de Procesos, Instituto de Ingeniería Química, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay; 2: Heterogenoeus Computing Laboratory, Instituto de Computación, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay Refining Equation-Based Model Building for Practical Applications in Process Industry Kyoto University, Japan Solar Desalination and Porphyrin Mediated Vis-Light Photocatalysis in Decolouration of Dyes as Biological Analogues Applied in Advanced Water Treatment University of Pretoria, South Africa Diagnosing Faults in Wastewater Systems: A Data-Driven Approach to Handle Imbalanced Big Data 1: Shiraz University, Iran, Islamic Republic of; 2: Technical University of Denmark (DTU), Denmark Industrial Time Series Forecasting for Fluid Catalytic Cracking Process 1: Department of Chemical Engineering, Tsinghua University, Beijing 100084, China; 2: PetroChina Planning & Engineering Institute, Beijing 100083, China Electrochemical conversion of CO2 into CO. Analysis of the influence of the electrolyzer type, operating parameters, and separation stage 1: Institute of Bioeconomy, University of Valladolid, Spain; 2: The Sargent Centre for Process Systems Engineering, Imperial College, UK; 3: I-X Centre for AI in Science, Imperial College, UK; 4: Department of Chemistry, Stephenson Institute for Renewable Energy, University of Liverpool, UK Enhancing Pharmaceutical Development: Process Modelling and Control Strategy Optimization for Liquids Drug Products Multiphase Mixing and Milling Processes Johnson & Johnson Innovative Medicine, Belgium Assessing operational resilience within the natural gas monetisation network for enhanced production risk management: Qatar as a case study Hamad Bin Khalifa University, Qatar Membrane-based Blue Hydrogen Production in Sub-Ambient Temperature: Process Optimization, Techno-Economic Analysis and Life Cycle Assessment 1: Chonnam National University, Korea, Republic of (South Korea); 2: Sunchon National University, Korea, Republic of (South Korea) Dynamic Life Cycle Assessment in Continuous Biomanufacturing 1: Institute of Chemical, Environmental and Bioscience Engineering TU Wien,1060 Wien, Austria; 2: Department of Chemical and Biochemical Engineering, Søltofts Plads, Building 228A, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark Multi-level modeling of reverse osmosis process based on CFD results Chonnam National University, Korea, Republic of (South Korea) Optimal system design and scheduling for ammonia production from renewables under uncertainty: Stochastic programming vs. robust optimization 1: Max Planck Institute for Dynamics of Complex Technical Systems, Department of Process Systems Engineering, Sandtorstr. 1, 39106 Magdeburg, Germany; 2: Otto von Guericke University, Chair for Process Systems Engineering, Universitätsplatz 2, 39106 Magdeburg, Germany CO2 Sequestration and Valorization to Synthetic Fuels: Multi-criteria Based Process Design and Optimization for Feasibility National Institute of Advanced Industrial Science and Technology, Japan Leveraging Pilot-scale Data for Real-Time Analysis of Ion Exchange Chromatography Technical University of Denmark, Denmark Model Based Flowsheet Studies on Cement Clinker Production Processes 1: Siemens Industry Software Limited, 26-28 Hammersmith Grove, W6 7HA London, United Kingdom; 2: CAPE-Lab (Computer-Aided Process Engineering Laboratory), Department of Industrial Engineering, University of Padova, 35131 Padova PD, Italy A Social Life Cycle Assessment for Sustainable Pharmaceutical Supply Chains Centre for Management Studies of IST (CEG-IST), University of Lisbon, Portugal Quantum Computing for Synthetic Bioprocess Data Generation and Time-Series Forecasting 1: Sqale; 2: Denmark Technical University Optimising Crop Schedules and Environmental Impact in Climate-Controlled Greenhouses: A Hydroponics vs. Soil-Based Food Production Case Study Hamad bin Khalifa University, Qatar Technological Trends towards Sustainable and Circular Process Design Departamento de Procesos y Tecnología, Universidad Autónoma Metropolitana-Cuajimalpa, Mexico From experiment design to data-driven modeling of powder compaction process 1: RPTU Kaiserslautern, Germany; 2: TU Dortmund, Germany Taking into account social aspects for the development of industrial ecology Laboratoire de Genie Chimique, Toulouse INP, CNRS, Université Paul Sabatier, France Life cycle impacts characterization of carbon capture technologies for their integration in eco-industrial parks Laboratoire de Genie Chimique, Toulouse INP, CNRS, Université Paul Sabatier, France Dynamic simulation and life cycle assessment of energy storage systems connecting variable renewable sources with regional energy demand The University of Tokyo, Japan Optimisation of carbon capture utilisation and storage supply chains under carbon trading and taxation The Sargent Centre for Process Systems Engineering, Department of Chemical Engineering,University College London (UCL), Torrington Place, London WC1E 7JE, UK Impact of energy sources on Global Warming Potential of hydrogen production: Case study of Uruguay 1: Unidad Tecnológica de Energias Renovables, Universidad Tecnologica del Uruguay; 2: Depto. de Bioingeniería, Instituto de Ingeniería Química, Facultad de Ingeniería, Udelar; 3: Instituto de Ingeniería Química, Facultad de Ingeniería, Udelar Impact of the share of renewable energy integration in the selection of sustainable natural gas production pathways Ecole Polytechnique Federale de Lausanne, Switzerland Decarbonizing the German Aviation Sector: Assessing the feasibility of E-Fuels and their environmental implications 1: Universidad Industrial de Santander-UIS, Colombia; 2: Technical University of Munich-TUM, Germany Solar-Driven Hydrogen Economy Potential in the Greater Middle East: Geographic, Economic, and Environmental Perspectives 1: Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 11000, FI-00076 Aalto, Finland; 2: Department of Chemistry & Chemical Engineering, SBA School of Science and Engineering, Lahore University of Management Sciences (LUMS), Lahore, 54792, Pakistan; 3: Department of Chemical Engineering, Pukyong National University, Busan, Republic of Korea |
||||||
| 4:00pm - 6:00pm |
T1: Modelling and Simulation - Session 3 Location: Zone 3 - Room E030 Techno-economic evaluation of incineration, gasification and pyrolysis of refuse derived fuel Slovak University of Technology, Slovak Republic 4:20pm - 4:40pm A 2-D Transient State CFD modelling of a fixed-bed reactor for ammonia synthesis 1: Energy, Materials and Environment Laboratory, Department of Chemical Engineering, Universidad de La Sabana, Campus Universitario Puente del Común, Km. 7 Autopista Norte, Bogotá Colombia; 2: Department of Mathematics, Physics and Statistics, Universidad de La Sabana, Campus Universitario Puente del Común, km. 7 Autopista Norte, Bogotá, Colombia. 4:40pm - 5:00pm Kernel-based estimation of wind farm power probability density considering wind speed and wake effects due to wind direction University of Burgos, Spain 5:00pm - 5:20pm Optimisation of Biomass-Energy-Water-Food Nexus under Uncertainty University College London, United Kingdom 5:20pm - 5:40pm A Century of Data: Thermodynamics and Ammonia Synthesis Kinetics on Various Commercial Iron-based Catalysts University of Twente 5:40pm - 6:00pm Mathematical modeling and simulation of multi-feeding rotating packed bed (MF-RPB) absorber for MEA-based carbon capture Chonnam National University, Korea, Republic of (South Korea) |
T2: Sustainable Product Development and Process Design - Session 3 Location: Zone 3 - Room E031 Chair: Effie Marcoulaki Co-chair: Hideyuki Matsumoto Steady-State Digital Twin Development for Heat and Shaft-Work Integration in a Dual-Stage Pressure Nitric Acid Plant Retrofit University of Zagreb Faculty of Mechanical Engineering and Naval Architecture, Croatia 4:20pm - 4:40pm Sustainable and Intensified Process for Gamma-Valerolactone Production from Levulinic Acid: A Reactive Distillation Approach 1: Universidad de Guanajuato, Mexico; 2: CIATEC A.C. Centro de Innovación Aplicada en Tecnologías Competitivas 4:40pm - 5:00pm Design and cost analysis of a reactive distillation column to produce ethyl levulinate using excess levulinic acid School of Chemical Engineering, University of Campinas, Brazil 5:00pm - 5:20pm Kinetic modelling, technoeconomic analysis and environmental impact of the production of triacetin from purified waste glycerol 1: Dept. of Chemical Engineering, The University of Manchester, M13 9PL Manchester (UK); 2: Dept. of Chemical Engineering, Complutense University of Madrid, 28040 Madrid (Spain) 5:20pm - 5:40pm Green Industrial-Scale Plant Design for Syngas Fermentation to Isopropyl Alcohol and Acetone: Economic and Environmental Sustainability Assessment Delft University of Technology, The Netherlands 5:40pm - 6:00pm Sustainable Development Goals Assessment of Alternative Acetic Acid Synthesis Routes Institute for Chemical and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zurich, Vladimir-Prelog-Weg 1, 8093 Zurich, Switzerland |
Session in honour of Pedro Castro Location: Zone 3 - Room E032 Chair: Ignacio E Grossmann Co-chair: Henrique Matos Tribute to the contributions of Pedro Castro 1: henrimatos@tecnico.ulisboa.pt I CERENA – Instituto Superior Técnico, Universidade de Lisboa, Portugal; 2: Carnegie Mellon University, United States of America; 3: Aalto University, Finland 4:20pm - 4:40pm A Novel Detailed Representation of Batch Processes for Production Scheduling 1: International Hellenic University, Greece; 2: Intelligen, Inc., USA 4:40pm - 5:00pm Enhancing Large-scale Production Scheduling using Machine-Learning Techniques Department of Chemical Engineering, Aristotle University of Thessaloniki, Greece 5:00pm - 5:20pm Multiscale analysis through the use of biomass residues and CO2 towards energetic security at country scale via methane production 1: Department of Chemical Engineering. Universidad de Salamanca. Plz Caídos 1-5, 37008, Salamanca, SPAIN; 2: Department of Chemical Engineering. Carnegie Mellon University. 5000 Forbes Ave, Pittsburgh, PA, U.S.A. 5:20pm - 5:40pm A novel global sequence-based mathematical formulation for energy-efficient flexible job shop scheduling problems Centre for Process Integration, Department of Chemical Engineering, School of Engineering, The University of Manchester, Manchester, M13 9PL, United Kingdom 5:40pm - 6:00pm Optimization model and algorithms for the Unit Commitment problem 1: Carnegie Mellon University; 2: Hitachi Energy Research; 3: Aalto University; 4: King Abdullah University of Science and Technology |
T4: Model Based optimisation and advanced Control - Session 3 Location: Zone 3 - Room E033 Chair: Adel Mhamdi Co-chair: Alexander Mitsos Refinery optimal transitions by iterative linear programming University of KwaZulu-Natal, South Africa 4:20pm - 4:40pm Probabilistic Model Predictive Control for Mineral Flotation using Gaussian Processes 1: Department of Chemical Engineering, Imperial College London, South Kensington Campus, London SW7 2AZ, United Kingdom; 2: Department of Chemical Engineering, Brunel University London, Uxbridge, UB8 3PH, United Kingdom 4:40pm - 5:00pm Revenue Optimization for a Hybrid Solar Thermal Power Plant for Dynamic Operation Indian Institute of Technology Bombay, India 5:00pm - 5:20pm Control of the WWTP Water Line Using Traditional and Model Predictive Control Approaches 1: Babeş-Bolyai University of Cluj-Napoca; 2: Delft University of Technology 5:20pm - 5:40pm A theoretical Chance-constrained explicit Model Predictive Control based framework for balancing Safety and Operational Efficiency 1: Texas A&M Energy Institute, Texas A&M University, College Station, TX, USA; 2: Mary Kay O’Connor Process Safety Center (MKOPSC), Texas A&M University, College Station, TX, USA; 3: Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, TX, USA; 4: Department of Chemical and Biomedical Engineering, West Virginia University, Morgantown, WV, USA 5:40pm - 6:00pm A Novel Continuous Reformulation for Recipe-based Dynamic Optimization of Batch Processes Technical University of Berlin, Process Dynamics and Operations Group, Straße des 17. Juni 135, Berlin D-10709, Germany |
T5: Concepts, Methods and Tools - Session 3 Location: Zone 3 - Room D016 Chair: Arnaud DUJANY Co-chair: Ludovic Montastruc Applying Time Series Extrinsic Regression to Parameter Estimation Problems for Dynamic Models – an Alternative to Gradient-Free Approaches? Technische Universität Berlin, Germany 4:20pm - 4:40pm GRAPSE: Graph-Based Retrieval Augmentation for Process Systems Engineering 1: Carnegie Mellon University, United States of America; 2: Evonik Corporation, United States of America 4:40pm - 5:00pm Flexibility assessment via affine bound evaluation 1: CERENA, Department of Chemical Engineering, Instituto Superior Técnico, University of Lisbon, Lisbon, Portugal; 2: The Sargent Centre for Process Systems Engineering, Imperial College London, London, United Kingdom; 3: Department of Chemical Engineering, Imperial College London, London, United Kingdom 5:00pm - 5:20pm Interval Hessian-based Algorithm for Nonconvex Optimization 1: Department of Chemical Engineering, Indian Institute of Technology Kanpur, Kanpur 208016, India; 2: Department of Chemical Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India 5:20pm - 5:40pm Efficient exploration of near-optimal designs by exploiting convexity ETH Zurich, Switzerland 5:40pm - 6:00pm SNoGloDe: A Structured Nonlinear Global Decomposition Solver 1: Department of Chemical Engineering, Carnegie Mellon University, Pittsburgh, PA; 2: Discrete Math and Optimization, Sandia National Laboratories, Albuquerque, NM; 3: University of British Columbia, Chemical and Biological Engineering, Vancouver, British Columbia, Canada |
T6: Digitalization and AI - Session 2 Location: Zone 3 - Room D049 Chair: Fatima Rani Co-chair: Sergio Lucia Computational Assessment of Molecular Synthetic Accessibility using Economic Indicators 1: Imperial College London, United Kingdom; 2: University of Manchester, United Kingdom 4:20pm - 4:40pm ML-based adsorption isotherm prediction of metal-organic frameworks for carbon dioxide and methane separation adsorbent screening School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea 4:40pm - 5:00pm Predicting Surface Tension of Organic Molecules Using COSMO-RS Theory and Machine Learning 1: Center for Industrial Process Technology, Department of Chemical Engineering, KU Leuven, Agoralaan Building B, 3590 Diepenbeek, Belgium; 2: KU Leuven, Department of Chemical Engineering, Celestijnenlaan 200F-bus 2424, Leuven 3001, Belgium; 3: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 4, Kjemiblokk 5, Trondheim 793101, Norway 5:00pm - 5:20pm Hybrid model development for Succinic Acid fermentation: relevance of ensemble learning for enhancing model prediction Universidad Nacional de Colombia sede Manizales, Colombia 5:20pm - 5:40pm Addressing the bottlenecks in implementing artificial intelligence for decarbonisation of thermal power plants University College London, United Kingdom 5:40pm - 6:00pm Thermodynamics-informed graph neural networks for transition enthalpies 1: Department of Chemical Engineering, KU Leuven, Leuven, Belgium; 2: Institute of Thermal Separation Processes, Hamburg University of Technology, Hamburg, Germany |
T8: CAPE Education and Knowledge Transfer - Session 1 Location: Zone 3 - Aula E036 Chair: Lidija Cucek Co-chair: Iqbal M Mujtaba Beyond ChatGMP: Improving LLM generation through user preferences 1: Technical University of Denmark (DTU), Denmark; 2: Imperial College London, UK 4:20pm - 4:40pm Teaching Automatic Control for Chemical Engineers STU in Bratislava, Slovak Republic 4:40pm - 5:00pm Variations on the Flipped Class: The good, the bad and the surprising 1: Technion, Israel; 2: Imperial College London, U. K. 5:00pm - 5:20pm Integrating Project-Based Learning in Chemical Thermodynamics Education université de Liège, Belgium 5:20pm - 5:40pm Exergy in Chemical Engineering Education Norwegian University of Science and Technology (NTNU), Department of Energy and Process Engineering, Trondheim, Norway 5:40pm - 6:00pm Closing the loop: embedded customized coding courses and chatbots in a virtual lab to teach bioprocesses Technical University of Denmark (DTU), Denmark |
T9: PSE4Food and Biochemical - Session 2 Location: Zone 3 - Aula D002 Chair: Dimitrios I. Gerogiorgis Co-chair: Alexandros Koulouris A generalised optimization approach for the characterization of non-conventional streams 1: Department of Process Analysis and Plant Design, School of Chemical Engineering, National Technical University of Athens, Athens, Greece; 2: System Reliability and Industrial Safety Laboratory, National Center for Scientific Research “Demokritos”, Athens, Greece 4:20pm - 4:40pm Integrated hybrid modelling of lignin bioconversion Georgia Institute of Technology, United States of America 4:40pm - 5:00pm Plant-wide Modelling of a Biorefinery: Microalgae for the Valorization of Digestate in Biomethane plants 1: Politecnico di Milano, Italy; 2: A2A S.p.A. 5:00pm - 5:20pm Control-oriented modelling and parameter estimation for full-scale anaerobic co-digestion 1: DEIB Department, Politecnico di Milano, Italy; 2: DICA Department, Politecnico di Milano, Italy 5:20pm - 5:40pm Process design for a novel fungal biomass valorisation approach 1: SINTEF AS, Norway; 2: Technical University of Munich, Germany 5:40pm - 6:00pm Valorization of suspended solids from wine effluents through hydrothermal liquefaction: a sustainable solution for residual sludge management 1: Facultad de Ingeniería, Universidad Autónoma de Querétaro, Mexico; 2: Departamento de Ingeniería Química, Universidad de Guanajuato, Mexico |
| 8:00pm - 9:30pm |
Concert at Saint Bavo's Cathedral Location: Saint Bavo's Cathedral |
|||||||
|
| |||||||||
| 8:00am - 8:30am |
Registration Location: Entrance Hall - Cafetaria |
||||||||
| 8:30am - 10:30am |
T1: Modelling and Simulation - Session 4 Location: Zone 3 - Room E031 Chair: Brahim Benyahia Wind Turbines Power Coefficient estimation using manufacturer’s information and real data Universidad de Burgos, Spain 8:50am - 9:10am Techno-economic analysis of a novel small-scale blue hydrogen and nitrogen production system University of Connecticut, USA 9:10am - 9:30am A new computational method for the simulation of catalyst deactivation in fluidized bed reactors 1: Politecnico di Milano, Italy; 2: Paul Scherrer Institute, Switzerland 9:30am - 9:50am Kinetic modelling and optimisation of CO2 capture and utilisation to methane on dual function material 1: School of Chemistry and Chemical Engineering, University of Surrey, Guildford, Surrey GU2 7XH, United Kingdom; 2: Department of Chemical Engineering, School of Engineering, The University of Manchester, UK; 3: Institute for Sustainability, University of Surrey, Guildford, Surrey GU2 7XH, UK 9:50am - 10:10am Real-time carbon accounting and forecasting for reduced emissions in grid-connected processes 1: Emissium Labs, Portugal; 2: Instituto Superior Técnico, Portugal; 3: Industrial Process and Energy Systems Engineering (IPESE), École Polytechnique Fédérale de Lausanne, Sion, Switzerland 10:10am - 10:30am Liquid Organic Hydrogen Carriers: comparing alternatives through energy and exergy analysis Politecnico di Milano, Italy |
T2: Sustainable Product Development and Process Design - Session 4 Location: Zone 3 - Room D016 Chair: Cristhian Molina Fernández Co-chair: Stavros Papadokonstantakis Sustainable downstream process design for HMF conversion to value-added chemicals 1: Babes-Bolyai University, Romania; 2: Delft University of Technology 8:50am - 9:10am Sustainable Two-Column Design for the Separation of Ethyl Acetate, Methanol, and Water Indian Institute of Technology, Kanpur, India 9:10am - 9:30am Separation Sequencing in Batch Distillation: An Extension of Marginal Vapor Rate Method Indian Institute of Technology, Bombay, India 9:30am - 9:50am Energy efficient process designs for acrylonitrile production by propylene ammoxidation 1: Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, 2629 HZ, Delft, The Netherlands; 2: Department of Chemical and Biochemical Engineering, University Politehnica of Bucharest, 313 Spl. Independentei, 060042 Bucharest-6, Romania 9:50am - 10:10am Modelling of the crystallization of Ni-Mn-Co hydroxide co-precipitation University of Sheffield, United Kingdom 10:10am - 10:30am Robust pharmaceutical tableting process through combined probabilistic design space and flexibility analysis Loughborough University, United Kingdom |
T3: Large Scale Design and Planning/ Scheduling - Session 3 Location: Zone 3 - Aula E036 Chair: Edwin Zondervan Co-chair: Iiro Harjunkoski Genetic Algorithm-Driven Design and Rolling-Horizon Expansion of CCTS and Hydrogen Pipeline Networks The University of Sheffield, United Kingdom 8:50am - 9:10am Optimized Power Allocation in Dual-Stack Fuel Cells to Minimize Hydrogen Consumption 1: Koç University, Turkiye; 2: Ford Otosan R&D Center, Turkiye 9:10am - 9:30am Optimal Operation of Water Electrolysis for Clean Hydrogen Production: Case Study for Jeju Island in South Korea 1: Chungnam National University, Korea, Republic of (South Korea); 2: Korea Institute of Energy Research, Korea, Republic of (South Korea) 9:30am - 9:50am Green hydrogen transport across the Mediterranean Sea: a comparative study of liquefied hydrogen and ammonia as carriers Politecnico di Milano, Italy 9:50am - 10:10am Optimisation Under Uncertain Meteorology: Stochastic Modelling of Hydrogen Export Systems Imperial College London, United Kingdom |
T4: Model Based optimisation and advanced Control - Including keynote Location: Zone 3 - Aula D002 Chair: Srinivas Palanki Co-chair: Radoslav Paulen Keynote: Principles and Applications of Model-free Extremum Seeking – A Tutorial Review University of Mons, Belgium 9:10am - 9:30am Extremum seeking control applied to operation of dividing wall column 1: SINTEF Digital, Norway; 2: Norwegian University of Science and Technology 9:30am - 9:50am MORL4PC: An Adaptive Multi-Objective Reinforcement Learning approach for Process Control Sargent Centre for Process Systems Engineering, Imperial College London, United Kingdom 9:50am - 10:10am Perturbation methods for Modifier Adaptation with Quadratic approximation 1: BASF SE, Germany; 2: Technical University Dortmund 10:10am - 10:30am Optimal Energy Scheduling for Battery and Hydrogen Storage Systems Using Reinforcement Learning 1: TU Wien, Institute of Energy Systems and Thermodynamics, Austria; 2: TU Wien, Institute of Mechanics and Mechatronics, Austria |
T5: Concepts, Methods and Tools - Session 4 Location: Zone 3 - Room E030 Chair: Gintaras Reklaitis Co-chair: Guido Sand Enhancing Batch Chemical Manufacturing via Development of Deep Learning based Predictive Monitoring with Transfer Learning Tsinghua University, China, People's Republic of 8:50am - 9:10am Soft-Sensor-Enhanced Monitoring of an Alkylation Unit via Multi-Fidelity Model Correction 1: Slovak University of Technology in Bratislava, 812 37 Bratislava, Slovakia; 2: Department of Civil and Industrial Engineering, University of Pisa, 561 22 Pisa, Italy; 3: Slovnaft, a.s., Bratislava 824 12, Slovakia 9:10am - 9:30am A data-driven hybrid multi-objective optimization framework for Large-Scale partial differential algebraic equation systems University of Manchester, United Kingdom 9:30am - 9:50am Computer Vision Approach based on Mutual Information for Measuring Interface Level in Process Equipment 1: Department of Chemical Engineering, Indian Institute of Technology Madras, Chennai; 2: Department of Applied Mechanics and Biomedical Engineering, Indian Institute of Technology Madras, Chennai; 3: American Express Lab for Data Analytics, Risk and Technology, Indian Institute of Technology Madras, Chennai 9:50am - 10:10am Kolmogorov Arnold Networks as surrogate models for process optimization Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology 10:10am - 10:30am Data-driven modeling of dynamic systems via convolutional neural networks Technische Universität Berlin, Process Dynamics and Operations Group, Straße des 17. Juni 135, 10623 Berlin, Germany |
T6: Digitalization and AI - Session 3 Location: Zone 3 - Room E033 Chair: Rajagopalan Srinivasan Co-chair: Dongda Zhang AI-Driven Automatic Mechanistic Model Transfer Learning for Accelerating Process Development 1: The University of Manchester, United Kingdom; 2: Unilever Research Port Sunlight, United Kingdom 8:50am - 9:10am CompArt: Next-Generation Compartmental Models for Complex Systems Powered by Artificial Intelligence Purdue University, United States of America 9:10am - 9:30am Large Language models (LLMs) for reverse engineering of perovskite solar cells 1: Industrial Process and Energy Systems Engineering, Ecole Polytechnique Fedérale de Lausanne, Switzerland; 2: Institute of Chemical Sciences and Engineering, Ecole Polytechnique Fedérale de Lausanne, Switzerland 9:30am - 9:50am Enhancing Predictive Maintenance in Used Oil Re-Refining: A Hybrid Machine Learning Approach 1: Itelyum Regeneration S.p.A., Via Tavernelle 19, Pieve Fissiraga 26854, Lodi, Italy; 2: Politecnico di Milano, CMIC Dept. “Giulio Natta”, Piazza Leonardo da Vinci 32, Milan 20133, Italy; 3: Sargent Centre for Process Systems Engineering, Imperial College London, SW7 2AZ, United Kingdom; 4: Department of Chemical Engineering, Imperial College London, SW7 2AZ, United Kingdom |
T7: CAPEing with Societal Challenges - Session 2 Location: Zone 3 - Room E032 Co-chair: Gonzalo Guillén-Gosálbez On the Economic Uncertainty and Crisis Resiliency of Decarbonization Solutions for the Aluminium Industry 1: Industrial Process and Energy Systems Engineering, Ecole Polytechnique Fédérale de Lausanne, EPFL, Sion, Switzerland; 2: Institute of Sustainable Energy, School of Engineering, University of Applied Sciences and Arts Western Switzerland (HES-SO), Sion, Switzerland; 3: Novelis Switzerland S.A., Sierre, Switzerland 8:50am - 9:10am Transition pathways for the Belgian Industry: application to the case of the lime sector 1: Chemical Engineering, University of Liège, Belgium; 2: Federal Polytechnic School of Lausanne, IPESE group, Switzerland 9:10am - 9:30am Resource and Pathways Analysis for Decarbonizing the Pulp and Paper Sector in Quebec Laboratoire des technologies de l'énergie (LTE), Hydro-Québec, Canada 9:30am - 9:50am Comparative assessment of chemical absorption-based CO2 capture and injection systems and alternative decarbonization technologies in the cement industry 1: Chemical Engineering, Université de Liège, Belgium; 2: IPESE group, Federal Polytechnic School of Lausanne, Sion, Switzerland. 9:50am - 10:10am Participative tool-based method to develop indicators to support a transition to a circular economy 1: Laboratoire de Génie Chimique, CNRS/INP/UPS, Université de Toulouse, France; 2: Laboratoire d'Étude et de Recherche sur l'Économie, les Politiques et les Systèmes sociaux, Université de Toulouse, France |
T9: PSE4Food and Biochemical - Session 3 Location: Zone 3 - Room D049 Chair: Zorka Novak-Pintaric Co-chair: Ihab Hashem Machine learning-enhanced Sensitivity Analysis for Complex Pharmaceutical Systems 1: Sargent Centre for Process Systems Engineering, Imperial College London, SW7 2AZ, UK; 2: Department of Chemical Engineering, Imperial College London, SW7 2AZ, UK; 3: Roche Pharma Research and Early Development, Predictive Modeling and Data Analytics, F. Hoffmann-La Roche Ltd, Grenzacherstrasse 124, 4070 Basel, Switzerland; 4: PSE-Lab, Process Systems Engineering Laboratory - Dipartimento di Chimica, Materiali e Ingegneria Chimica “Giulio Natta” Politecnico di Milano - Piazza Leonardo da Vinci 32, 20133 Milano, Italy 8:50am - 9:10am Deacidification of Used Cooking Oil: Modeling and Validation of Ethanolic Extraction in a Liquid-Liquid Film Contactor Universidad Nacional de Colombia, Colombia 9:10am - 9:30am Modelling the in vitro FooD Digestion SIMulator FooDSIM BioTeC+, KU Leuven, Gebroaders De Smetstraat 1, Gent 9000, Belgium 9:30am - 9:50am Towards Sustainable Production: Automated Solvent Design for Downstream Processing in Methyl ketone Fermentation 1: Institute of Technical Thermodynamics, RWTH Aachen University; 2: Department of Chemical Engineering, Fluid Process Engineering, RWTH Aachen University 9:50am - 10:10am COMPUTER-AIDED DESIGN AND OPTIMIZATION OF A LYCOPENE PRODUCTION PROCESS FROM TOMATO WASTE 1: Universidad de Guanajuato, Mexico; 2: Universidad de Salamanca, Spain; 3: Imperial College London, United Kingdom; 4: Universidad Autónoma de Querétaro, Mexico 10:10am - 10:30am Kinetic modelling for PHB biosynthesis and biodegradation University of Manchester, United Kingdom |
|
| 10:30am - 11:00am |
Coffee Break Location: Zone 2 - Cafetaria |
Poster Session 2 Location: Zone 2 - Cafetaria Rebalancing CAPEX and OPEX to Mitigate Uncertainty and Enhance Energy Efficiency in Renewable Energy-Fed Chemical Processes LGC (INP - ENSIACET), France Operational and Economic Feasibility of Green Solvent-Based Extractive Distillation for 1,3-Butadiene Recovery: A Comparison with Conventional Toxic Solvents 1: LEPABE / ALiCE, Faculdade de Engenharia da Universidade do Porto; 2: Repsol Polímeros, S.A., Complexo Petroquímico; 3: CERENA, Instituto Superior Técnico Optimizing Heat Recovery: Advanced Design of Integrated Heat Exchanger Networks with ORCs and Heat Pumps Universidad de Alicante, Spain CO2 recycling plant for decarbonizing hard-to-abate industries: Empirical modelling and Process design of a CCU plant- A case study Departamento de Ingenierías Química y Biomolecular, Universidad de Cantabria Integration of direct air capture with CO2 utilization technologies powered by renewable energy sources to deliver negative carbon emissions 1: Babes-Bolyai University, Faculty of Chemistry and Chemical Engineering, Romania; 2: National Institute for Research and Development of Isotopic and Molecular Technologies, Romania Repurposing Existing Combined Cycle Power Plants with Methane Production for Renewable Energy Storage Department of Chemical Engineering, University of Salamanca, Plz Caidos 1-5, 37008, Salamanca, Spain Powering chemical processes with variable renewable energy: A case of iron making in steel industry University of Oxford, United Kingdom Early-Stage Economic and Environmental Assessment for Emerging Chemical Technologies: Back-casting Approach Chungnam National University, Korea, Republic of (South Korea) A White-Box AI Framework for Interpretable Global Warming Potential Prediction King's College London, United Kingdom Data-driven approach for reaction mechanism identification using neural ODEs 1: The University of Tokyo, Japan; 2: Auxilart Co., Ltd., Tokyo, 104-0061, Japan; 3: Institute of Physical and Chemical Research, Hyogo, 660-0813, Japan; 4: Independent researcher, Japan Generalised Disjunctive Programming for Process Synthesis Technische Universität Berlin, Germany Optimal Design and Operation of Off-Grid Electrochemical Nitrogen Reduction to Ammonia 1: RWTH Aachen University, Germany; 2: JARA-ENERGY, 52056 Aachen, Germany; 3: Energy Systems Engineering (ICE-1), Forschungszentrum Jülich, Germany A Stochastic Techno-Economic Assessment of Emerging Artificial Photosynthetic Bio-Electrochemical Systems for CO₂ Conversion Oxford University, United Kingdom Empowering LLMs for Mathematical Reasoning and Optimization: A Multi-Agent Symbolic Regression System Siemens Technology and Services Pvt. Ltd Solid Oxide Cells and Hydrogen Storage to Prevent Grid Congestion École Polytechnique Fédérale de Lausanne, Switzerland A Modern Portfolio Theory Approach for Chemical Production with Supply Chain Considerations for Efficient Investment Planning Texas A&M University at Qatar, Qatar Co-gasification of crude glycerol and plastic waste using air/steam mixtures: a modelling approach UNIVERSITY OF SOUTH AFRICA, South Africa COMPARATIVE AND STATISTICAL STUDY ON ASPEN PLUS INTERFACES USED FOR STOCHASTIC OPTIMIZATION 1: Universidad de Guanajuato, Mexico; 2: Pontificia Universidad Católica del Perú, Peru; 3: Instituto Tecnológico Superior de Guanajuato, Mexico 3D simulation and design of MEA-based absorption system for biogas purification National Cheng Kung University, Taiwan Enhancing Chemical Process Design: Aligning DEXPI Process with BPMN 2.0 for Improved Efficiency in Data Exchange 1: Process Dynamics and Operations Group, Technische Universität Berlin, Berlin, Germany; 2: Semtation GmbH, Potsdam, Germany Linear and non-linear convolutional approaches and XAI for spectral data: classification of waste lubricant oils University of Coimbra, Portugal Mathematical Modeling of Ammonia Nitrogen Dynamics in RAS Integrated with Bayesian Parameter Optimization 1: School of Chemistry and Chemical Engineering, University of Surrey, United Kingdom; 2: School of Sustainability, Civil and Environmental Engineering, University of Surrey, United Kingdom; 3: National Innovation Center for Digital Fishery, China Agricultural University,China Computer-Aided Design of a Local Biorefinery Scheme from Water lily (Eichhornia Crassipes) to Produce Power and Bioproducts 1: Universidad Michoacana de San Nicolás de Hidalgo, Facultad de Ingeniería Química, México; 2: Universidad Autónoma de Querétaro, Facultad de Ingeniería, Mexico; 3: Universidad Veracruzana, Instituto de Investigaciones Forestales, México System analysis and optimization of replacing surplus refinery fuel gas by coprocessing with HTL bio-crude off-gas in oil refineries. 1: Department of Engineering Systems and Services, Faculty of Technology, Policy, and Management, Delft University of Technology, Delft, the Netherlands; 2: Cartagena Refinery. Ecopetrol S.A., Colombia; 3: Department of Energy, Aalborg University, Aalborg, Denmark.; 4: Department of Chemical Engineering, Faculty of Applied Sciences, Delft University of Technology, Delft, the Technical Assessment of direct air capture using piperazine in an advanced solvent-based absorption process University of Sheffield, United Kingdom TEA of co-processing refinery fuel gas and biogenic gas streams from thermochemical conversion for methanol synthesis 1: Aalborg University, Denmark; 2: Delft University of Technology, The Netherlands Surrogate Model-Based Optimisation of Pressure-Swing Distillation Sequences with Variable Feed Composition Department of Building Services and Process Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Hungary Unveiling Probability Histograms from Random Signals using a Variable-Order Quadrature Method of Moments 1: The University of Jordan, Jordan, Hashemite Kingdom of; 2: Johannes Kepler University; 3: RPTU Kaiserslautern Sensitivity Analysis of Key Parameters in LES-DEM Simulations of Fluidized Bed Systems Using generalized polynomial chaos UM6P, Morocco An Efficient Convex Training Algorithm for Artificial Neural Networks by Utilizing Piecewise Linear Approximations and Semi-Continuous Formulations 1: Department of Chemical and Biological Engineering, Koç University, Turkiye; 2: Department of Industrial Engineering, Koç University, Turkiye; 3: SmartOpt, Turkiye Economic evaluation of Solvay processes for sodium bicarbonate production with brine and carbon tax considerations Gas Processing Center, College of Engineering, Qatar University, Doha, Qatar THE GREEN HYDROGEN SUPPLY CHAIN IN THE BRAZILIAN STATE OF BAHIA: A DETERMINISTIC APPROACH 1: SENAI CIMATEC university center, Brazil; 2: Instituto Superior Técnico – Universidade de Lisboa, Portugal A combined approach to optimization of soft sensor architecture and physical sensor configuration 1: Process Systems Engineering Group, TU Dresden, Germany; 2: Chair of Process Control Systems, TU Dresden, Germany Machine Learning Models for Predicting the Amount of Nutrients Required in a Microalgae Cultivation System 1: Laboratory for Process Engineering, Environment, Biotechnology and Energy (LEPABE); 2: Associate Laboratory in Chemical Engineering (ALiCE); 3: Algae for Future (A4F); 4: LAQV-REQUIMTE Dynamical modeling of ultrafine particle classification in tubular bowl centrifuges 1: RPTU Kaiserslautern, Germany; 2: KIT Karlsruhe, Germany Towards a multi-scale process optimization coupling custom models for unit operations, process simulator, and environmental impact. 1: Centro de Química Estrutural, Instituto Superior Técnico, Portugal; 2: Institute of Inorganic Chemistry, RWTH Aachen University, Germany Enhancing hydrodynamics simulations in Distillation Columns Using Smoothed Particle Hydrodynamics (SPH) 1: TECNOLÓGICO NACIONAL DE MÉXICO/ CAMPUS IRAPUATO, MÉXICO; 2: UNIVERSIDAD DE GUANAJUATO, MÉXICO; 3: UNIVERSIDAD TECNOLÓGICA DE LEÓN, CAMPUS LEÓN, MÉXICO Electric arc furnace dust waste management: A process synthesis approach. 1: Instituto de Ingeniería Química, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay; 2: Viento Sur Ingeniería, Ruta 61, Km 19, Nueva Helvecia, Colonia, Uruguay.; 3: Grupo de Ingeniería de Materiales, Inst. Tecn. Reg. Sur-Oeste, Universidad Tecnológica del Uruguay, Horacio Meriggi 905, CP60000, Paysandú, Uruguay. Network theoretical analysis of the reaction space in biorefineries Intelligent Systems Department, Delft University of Technology, Netherlands Applying Quality by Design to Digital Twin Supported Scale-Up of Methyl Acetate Synthesis 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Chair of Process Control Systems; 3: TUD Dresden University of Technology, Process-to-Order Lab Digital Twin supported Model-based Design of Experiments and Quality by Design 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Process-to-Order Lab; 3: TUD Dresden University of Technology, Chair of Process Control Systems; 4: Merck Electronics KGaA, Frankfurter Str. 250, Darmstadt 64293, Germany Bioprocess control using hybrid mechanistic and Gaussian process modeling BioTeC+, Chemical & Biochemical Process Technology & Control, KU Leuven, Belgium Tune Decomposition Schemes for Large-Scale Mixed-Integer Programs by Bayesian Optimization 1: Pforzheim University of Applied Science, Germany; 2: University of Twente, The Netherlands Enhancing industrial symbiosis to reduce CO2 emissions in a Portuguese industrial park 1: Centro de Química Estrutural, IMS, Department of Chemical Engineering, Instituto Superior Técnico/Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa, Portugal; 2: RESILIENCE – Center for Regional Resilience and Sustainability, Escola Superior de Tecnologia do Barreiro, Instituto Politécnico de Setúbal, 2839-001 Lavradio, Portugal Blue Hydrogen Plant: Accurate Hybrid Model Based on Component Mass Flows and Simplified Thermodynamic Properties is Practically Linear McMaster University, Canada Synergies between the distillation of first- and second-generation sugarcane ethanol for sustainable biofuel production 1: Universidade Estadual de Campinas, Brazil; 2: Delft Universtity of Technology, The Netherlands; 3: National Renewable Energy Laboratory, United States; 4: Terragia Biofuel Incorporated, United States; 5: Dartmouth College, United States Development of anomaly detection models independent of noise and missing values using graph Laplacian regularization Department of Materials Process Engineering, Nagoya University, Japan Comparing incinerator kiln model predictions with measurements of industrial plants 1: Université de Lorraine, Nancy, France; 2: SUEZ, Schweighouse-sur-Moder, France Modeling the freeboard of a municipal waste incinerator 1: Université de Lorraine, Nancy, France; 2: SUEZ, Schweighouse-sur-Moder, France Superstructure as a communication tool in pre-emptive life cycle design engaging society: Findings from case studies on battery chemicals, plastics, and regional resources 1: The University of Tokyo, Japan; 2: Tokyo City University, Japan; 3: Waseda University, Japan A kinetic model for transesterification of vegetable oils catalyzed by sodium methylate—Insights from inline Raman spectroscopy Process Systems Engineering (AVT.SVT), RWTH Aachen University, 52074 Aachen, Germany Integration of renewable energy and reversible solid oxide cells to decarbonize secondary aluminium production and urban systems 1: Ecole Polytechnique Federale de Lausanne, Switzerland; 2: Novelis Sierre S.A. A Novel Symbol Recognition Framework for Digitization of Piping and Instrumentation Diagrams 1: Department of Chemical Engineering, Tsinghua University, Beijing, China; 2: Department of Computer Science and Engineering, University of California, San Diego, US; 3: Sinopec Ningbo Engineering Co., Ltd, Ningbo, China Twin Roll Press Washer Blockage Prediction: A Pulp and Paper Plant Case Study 1: Department of Chemical and Materials Engineering, The University of Auckland, Auckland 1010, New Zealand; 2: Ahuora – Centre for Smart Energy Systems, School of Engineering, The University of Waikato, Hamilton 3240, New Zealand Addressing Incomplete Physical Models in Chemical Processes: A Novel Physics-Informed Neural Network Approach Tsinghua University, China, People's Republic of A Physics-based, Data-driven Numerical Framework for Anomalous Diffusion of Water in Soil Oklahoma State University, United States of America Supersaturation Monitoring for Batch Crystallization using Empirical and Machine Learning Models Department of Chemical and Biochemical Engineering, Søltofts Plads, Building 228A, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark Role of process integration and renewable energy utilization for the decarbonization of the watchmaking sector. 1: EPFL, Switzerland; 2: HES-SO Valai Wallis, Switzerland An Integrated Machine Learning Framework for Predicting HPNA Formation in Hydrocracking Units Using Forecasted Operational Parameters 1: SOCAR Turkey, Digital Transformation Department, Istanbul 34485, Turkey; 2: SOCAR STAR Oil Refinery, Process Department, Aliaga, Izmir 35800, Turkey Towards the Decarbonization of a Conventional Ammonia Plant by the Gradual Incorporation of Green Hydrogen Centro de Recursos Naturais e Ambiente, Department of Chemical Engineering, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal Gate-to-Gate Life Cycle Assessment of CO₂ Utilisation in Enhanced Oil Recovery: Sustainability and Environmental Impacts in Dukhan Field, Qatar hbku, Qatar Robust Flowsheet Synthesis for Ethyl Acetate, Methanol and Water Separation Indian institute of technology Kanpur, India Integrating offshore wind energy into the optimal deployment of a hydrogen supply chain: a case study in Occitanie 1: France Energies Marines / Laboratoire de Génie Chimique, France; 2: France Énergies Marines, Technopôle Brest-Iroise, 525 Avenue Alexis de Rochon, 29280, Plouzané, France Robust Techno-economic Analysis, Life Cycle Assessment, and Quality by-Design of Three Alternative Continuous Pharmaceutical Tablet Manufacturing Processes Loughborough University, United Kingdom Systematic Model Builder, Model-Based Design of Experiments, and Design Space Identification for A Multistep Pharmaceutical Process Loughborough University, United Kingdom The role of long-term storage in municipal solid waste treatment systems: Multi-objective resources integration 1: École Polytechnique Fédérale de Lausanne (EPFL), Industrial Process Energy Systems Engineering (IPESE), Sion, 1951, Switzerland; 2: Kanadevia Inova AG, Zürich, 8005, Switzerland A Comparative Study of Feature Importance in Process Data: Neural Networks vs. Human Visual Attention 1: Department of Applied Mechanics and Biomedical Engineering, Indian Institute of Technology Madras, Chennai 600036, India; 2: Department of Chemical Engineering, Indian Institute of Technology Madras, Chennai 600036, India; 3: American Express Lab for Data Analytics, Risk and Technology Indian Institute of Technology Madras, Chennai 600036, India Parameter Estimation and Model Comparison for Mixed Substrate Biomass Fermentation King's College London, United Kingdom Identification of Suitable Operational Conditions and Dimensions for Supersonic Water Separation in Exhaust Gases from Offshore Turbines: A Case Study 1: SENAI CIMATEC University Center, Brazil; 2: Leopoldo Américo Miguez de Mello Research Center (CENPES); 3: Federal University of Rio de Janeiro (UFRJ) On optimal hydrogen production pathway selection using the SECA multi-criteria decision-making method University of the Witwatersrand, South Africa On the role of Artificial Intelligence in Feature oriented Multi-Criteria Decision Analysis 1: Industrial Process and Energy Systems Engineering (IPESE), Ecole Polytechnique Fédérale de Lausanne, Sion, Switzerland; 2: École Polytechnique, France Optimizing CO2 Utilization in Reverse Water-Gas Shift Membrane Reactors with Parametric PINNs 1: Department of Chemical & Biomolecular Engineering, University of Connecticut, Storrs, CT 06269, USA; 2: Center for Clean Energy Engineering, University of Connecticut, Storrs, CT 06269, USA; 3: The Wolfson Department of Chemical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel Modeling, simulation and optimization of a carbon capture process through a fluidized TSA column 1: Polytechnic School of the University of Sao Paulo, Brazil; 2: Federal University of Ceará, Brazil Unlocking Process Dynamics: Interpretable PDE Solutions via Symbolic Regression University of Connecticut, USA Eco-Designing Pharmaceutical Supply Chains: A Process Engineering Approach to Life Cycle Inventory Generation 1: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France; 2: Tecnologico Nacional de México, Instituto Tecnológico de Orizaba, México; 3: Universidad Autónoma de Yucatán, Facultad de Ingeniería Química, Mérida, Yucatán, México Safe Reinforcement Learning with Lyapunov-Based Constraints for Control of an Unstable Reactor 1: Chemical and Biochemical Process Engineering Program/School of Chemistry, Universidade Federal do Rio de Janeiro (UFRJ), Brazil; 2: Chemical Engineering Program/COPPE, Universidade Federal do Rio de Janeiro (UFRJ), Brazil; 3: Sargent Centre for Process Systems Engineering, Imperial College London A two-level model to assess the economic feasibility of renewable urea production from agricultural wastes Universidade de São Paulo, Brazil Computer-based Chemical Engineering Education for Green and Digital Transformation Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova ulica 17, SI-2000 Maribor, Slovenia Development of a Hybrid Model for the Paracetamol Batch Dissolution in Ethanol Using Universal Differential Equations 1: School of Chemistry, EPQB, Universidade Federal do Rio de Janeiro, Av. Horácio Macedo, 2030, CT, Bloco E, 21941-914, Rio de Janeiro, RJ – Brazil; 2: Chemical Engineering Department, Norwegian University of Science and Technology, Trondheim, 793101, Norway; 3: Instituto de Química, Rio de Janeiro State University (UERJ), Rua São Francisco Xavier, 524, Maracanã, Rio de Janeiro, RJ, 20550-900, Brazil; 4: PEQ/COPPE – Universidade Federal do Rio de Janeiro, Av. Horácio Macedo, 2030, CT, Bloco G, G115, 21941-914, Rio de Janeiro, RJ – Brazil Novel PSE applications and knowledge transfer in joint industry - university energy-related postgraduate education 1: Optimisation of Production Systems Lab., University of West Attica; 2: Hellenic Energy S.A,; 3: Soft Energy Applications and Environmental Protection Lab., University of West Attica Optimal Operation of Middle Vessel Batch Distillation using an Economic MPC IIT Bombay, India Recurrent deep learning models for multi-step ahead prediction: comparison and evaluation for real Electrical Submersible Pump (ESP) system. 1: Norwegian University of Science and Technology, Norway; 2: Federal University of Bahia, Brazil; 3: CENPES, Petrobras R&D Center, Brazil Simulation and optimisation of vacuum (pressure) swing adsorption with simultaneous consideration of real vacuum pump data and bed fluidisation Centre for Process Integration, Department of Chemical Engineering, School of Engineering, The University of Manchester, United Kingdom Sociotechnical Transition: An Exploratory Study on the Social Appropriability of Users of Smart Meters in Wallonia. Université de Mons, Belgium Optimizing Methane Conversion in a Flow Reactor System Using Bayesian Optimization and Fisher Information Matrix Driven Experimental Design Approaches: A Comparative Study University College London, United Kingdom OPTIMAL CONTROL OF PSA UNITS BASED ON EXTREMUM SEEKING 1: Laboratory of Separation and Reaction Engineering−Laboratory of Catalysis and Materials (LSRE LCM), Department of Chemical Engineering, University of Porto, Porto, 4200-465, Portugal; 2: ALiCE−Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Porto, 4200-465, Portugal; 3: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 4, Kjemiblokk 5, Trondheim, 793101, Norway Enhancing Higher Education Capacity for Sustainable Data Driven Food Systems in Indonesia – FIND4S 1: BioTeC+, Chemical & Biochemical Process Technology & Control, KU Leuven, Belgium; 2: Department of Food Technology, Diponegoro University, Indonesia Optimization of Specific Heat Transfer Area for Multiple Effects Desalination (MED) Process 1: Sirte University, Libya; 2: Sirte Oil Company, National Oil Corporation, Libya; 3: University of Bradford, United Kingdom Companies’ operation and trading strategies under the triple trading of electricity, carbon quota and commodities: A game theory optimization modelling 1: State Key Lab of Power System Operation and Control, Department of Energy and Power Engineering, Tsinghua-BP Clean Energy Centre, Tsinghua University, Beijing, 100084, China; 2: Department of Chemical Engineering, Imperial College London, SW7 2AZ, United Kingdom Solvent and emission source dependent amine-based CO2 capture costs estimation methodology for systemic level analysis 1: Ecole Polytechnique Fédérale de Lausanne, Switzerland; 2: TotalEnergies OneTech, France Energy Planning Toward Absolute Environmental Sustainability: Key Decisions and Actionable Insights Through Interpretable Machine Learning 1: Université catholique de Louvain, Belgium; 2: Vrije Universiteit Brussel, Belgium |
|||||||
| 11:00am - 12:00pm |
Brewery visit Location: On-campus brewery |
T1: Modelling and Simulation - Session 5 Location: Zone 3 - Room D016 Chair: Laurent Dewasme Co-chair: Flavio Manenti Reaction Pathway Optimization Using Reinforcement Learning in Steam Methane Reforming and Associated Parallel Reactions Instituto Politecnico Nacional, Mexico 11:20am - 11:40am Modelling of a Heat Recovery System (HRS) integrated with Steam Turbine Combined Heat and Power (CHP) unit in a petrochemical plant 1: Department of Chemical Engineering, Instituto Superior Técnico, Universidade de Lisboa, Avenida Rovisco Pais 1, 1049-001 Lisboa, Portugal; 2: Research, Development and Innovation, ISQ, Avenida Prof. Dr. Cavaco Silva, 33 Taguspark, 2740-120 Porto Salvo, Portugal 11:40am - 12:00pm Application of K-means for the Identification of Multiphase Flows Based on Computational Fluid Dynamics 1: NTNU, Norway; 2: UFBA, Brazil |
T2: Sustainable Product Development and Process Design - Session 5 Location: Zone 3 - Room E033 Chair: Maria Papathanasiou Co-chair: Francois Marechal Decarbonisation pathways for packaging bioplastic alternatives 1: Industrial Energy Systems Laboratory, École Polytechnique Fédérale de Lausanne (EPFL),1950 Sion, Switzerland.; 2: Laboratory of Sustainable and Catalytic Processing, École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland. 11:20am - 11:40am Modeling and Simulation of a Novel Process that Converts Low Density Polyethylene to Ethylene West Virginia University, United States of America |
T3: Large Scale Design and Planning/Scheduling - Session 4 Location: Zone 3 - Room D049 Chair: Zheyu Jiang Co-chair: Benoit Chachuat Methods for Efficient Solutions of Spatially Explicit Biofuels Supply Chain Models 1: Department of Chemical and Biological Engineering, Princeton University, Princeton, NJ 08540, USA; 2: DOE Great Lakes Bioenergy Research Center, Madison, WI, 53726, USA; 3: Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08540, USA 11:20am - 11:40am Multi-objective Optimization of Steam Cracking Microgrid for Clean Olefins Production Oklahoma State University, United States of America |
T5: Concepts, Methods and Tools - Including keynote Location: Zone 3 - Aula E036 Chair: Eike Cramer Co-chair: Filip Logist Keynote: Pimp my distillation sequence – Shortcut-based screening of intensified configurations Hamburg University of Technology, Institute of Process Systems Engineering, Hamburg/Germany |
T7: CAPEing with Societal Challenges - Session 3 Location: Zone 3 - Room E032 Chair: Solomon Brown Co-chair: Henrique Matos Absolute Sustainability Assessment of Sustainable Aviation Fuels Institute for Chemical and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zürich, Vladimir-Prelog-Weg 1, 8093 Zürich, Switzerland 11:20am - 11:40am Techno-economic Assessment of Sustainable Aviation Fuel Production via H2/CO2-Based Methanol Pathway 1: Process and Systems Engineering Center (PROSYS), Department of Chemical and Biochemical Engineering, Technical University of Denmark (DTU), 2800 Kgs.Lyngby, Denmark; 2: Energy Transition - Process Department, Ramboll Energy, Hannemanns Allé 53 2300 København S, Danmark; 3: Catalysis and High Temperature Engineering Center (CHEC), Department of Chemical and Biochemical Engineering, Technical University of Denmark (DTU), 2800 Kgs.Lyngby, Denmark 11:40am - 12:00pm Sustainable Aviation Fuels Production via Biogas Reforming and Fischer-Tropsch Process Integrated with Solid Oxide Electrolysis Department of Biological and Chemical Engineering, Aarhus University, Hangøvej 2, Aarhus 8200, Denmark |
T8: CAPE Education and Knowledge Transfer - Session 2 Location: Zone 3 - Aula D002 Chair: Zorka Novak-Pintaric Co-chair: Miroslav Fikar Trends and Challenges in the Teaching of the Capstone Process Design Course Carnegie Mellon University, United States of America 11:20am - 11:40am Smart Manufacturing Course: Proposed and Executed Curriculum Integrating Modern Digital Tools into Chemical Engineering Education Purdue University, Davidson School of Chemical Engineering, West Lafayette, IN, United States of America 11:40am - 12:00pm Using realistic process design problems in chemical engineering education Johns Hopkins University, United States of America |
T9: PSE4Food and Biochemical - Session 4 Location: Zone 3 - Room E031 Chair: Dongda Zhang Co-chair: Simen Akkermans Metabolic network reduction based on Extreme Pathway sets BioTeC+, KU Leuven, Belgium 11:20am - 11:40am Context based multi-omics pathway embeddings 1: King's College London, United Kingdom; 2: Science for Life Laboratory, KTH - Royal Institute of Technology, Stockholm, Sweden 11:40am - 12:00pm Metabolic optimization of Vibrio natriegens based on metaheuristic algorithms and the genome‐scale metabolic model 1: Department of Chemical Engineering, Tsinghua University, Beijing 100084, China; 2: Beijing Key Laboratory of Industrial Big Data System and Application, Tsinghua University, Beijing 100084, China |
T10: PSE4BioMedical and (Bio)Pharma -Including keynote by JNJ Location: Zone 3 - Room E030 Chair: Dimitrios I. Gerogiorgis Co-chair: Satyajeet Bhonsale Keynote by Geert Crassaerts (JNJ)
Keynote by Geert Crassaerts JNJ |
| 12:00pm - 2:00pm |
Lunch Location: Zone 2 - Cafetaria |
||||||||
| 1:00pm - 2:00pm |
IChemE Panel Location: Zone 2 - B012 |
Poster Session 2 Location: Zone 2 - Cafetaria Rebalancing CAPEX and OPEX to Mitigate Uncertainty and Enhance Energy Efficiency in Renewable Energy-Fed Chemical Processes LGC (INP - ENSIACET), France Operational and Economic Feasibility of Green Solvent-Based Extractive Distillation for 1,3-Butadiene Recovery: A Comparison with Conventional Toxic Solvents 1: LEPABE / ALiCE, Faculdade de Engenharia da Universidade do Porto; 2: Repsol Polímeros, S.A., Complexo Petroquímico; 3: CERENA, Instituto Superior Técnico Optimizing Heat Recovery: Advanced Design of Integrated Heat Exchanger Networks with ORCs and Heat Pumps Universidad de Alicante, Spain CO2 recycling plant for decarbonizing hard-to-abate industries: Empirical modelling and Process design of a CCU plant- A case study Departamento de Ingenierías Química y Biomolecular, Universidad de Cantabria Integration of direct air capture with CO2 utilization technologies powered by renewable energy sources to deliver negative carbon emissions 1: Babes-Bolyai University, Faculty of Chemistry and Chemical Engineering, Romania; 2: National Institute for Research and Development of Isotopic and Molecular Technologies, Romania Repurposing Existing Combined Cycle Power Plants with Methane Production for Renewable Energy Storage Department of Chemical Engineering, University of Salamanca, Plz Caidos 1-5, 37008, Salamanca, Spain Powering chemical processes with variable renewable energy: A case of iron making in steel industry University of Oxford, United Kingdom Early-Stage Economic and Environmental Assessment for Emerging Chemical Technologies: Back-casting Approach Chungnam National University, Korea, Republic of (South Korea) A White-Box AI Framework for Interpretable Global Warming Potential Prediction King's College London, United Kingdom Data-driven approach for reaction mechanism identification using neural ODEs 1: The University of Tokyo, Japan; 2: Auxilart Co., Ltd., Tokyo, 104-0061, Japan; 3: Institute of Physical and Chemical Research, Hyogo, 660-0813, Japan; 4: Independent researcher, Japan Generalised Disjunctive Programming for Process Synthesis Technische Universität Berlin, Germany Optimal Design and Operation of Off-Grid Electrochemical Nitrogen Reduction to Ammonia 1: RWTH Aachen University, Germany; 2: JARA-ENERGY, 52056 Aachen, Germany; 3: Energy Systems Engineering (ICE-1), Forschungszentrum Jülich, Germany A Stochastic Techno-Economic Assessment of Emerging Artificial Photosynthetic Bio-Electrochemical Systems for CO₂ Conversion Oxford University, United Kingdom Empowering LLMs for Mathematical Reasoning and Optimization: A Multi-Agent Symbolic Regression System Siemens Technology and Services Pvt. Ltd Solid Oxide Cells and Hydrogen Storage to Prevent Grid Congestion École Polytechnique Fédérale de Lausanne, Switzerland A Modern Portfolio Theory Approach for Chemical Production with Supply Chain Considerations for Efficient Investment Planning Texas A&M University at Qatar, Qatar Co-gasification of crude glycerol and plastic waste using air/steam mixtures: a modelling approach UNIVERSITY OF SOUTH AFRICA, South Africa COMPARATIVE AND STATISTICAL STUDY ON ASPEN PLUS INTERFACES USED FOR STOCHASTIC OPTIMIZATION 1: Universidad de Guanajuato, Mexico; 2: Pontificia Universidad Católica del Perú, Peru; 3: Instituto Tecnológico Superior de Guanajuato, Mexico 3D simulation and design of MEA-based absorption system for biogas purification National Cheng Kung University, Taiwan Enhancing Chemical Process Design: Aligning DEXPI Process with BPMN 2.0 for Improved Efficiency in Data Exchange 1: Process Dynamics and Operations Group, Technische Universität Berlin, Berlin, Germany; 2: Semtation GmbH, Potsdam, Germany Linear and non-linear convolutional approaches and XAI for spectral data: classification of waste lubricant oils University of Coimbra, Portugal Mathematical Modeling of Ammonia Nitrogen Dynamics in RAS Integrated with Bayesian Parameter Optimization 1: School of Chemistry and Chemical Engineering, University of Surrey, United Kingdom; 2: School of Sustainability, Civil and Environmental Engineering, University of Surrey, United Kingdom; 3: National Innovation Center for Digital Fishery, China Agricultural University,China Computer-Aided Design of a Local Biorefinery Scheme from Water lily (Eichhornia Crassipes) to Produce Power and Bioproducts 1: Universidad Michoacana de San Nicolás de Hidalgo, Facultad de Ingeniería Química, México; 2: Universidad Autónoma de Querétaro, Facultad de Ingeniería, Mexico; 3: Universidad Veracruzana, Instituto de Investigaciones Forestales, México System analysis and optimization of replacing surplus refinery fuel gas by coprocessing with HTL bio-crude off-gas in oil refineries. 1: Department of Engineering Systems and Services, Faculty of Technology, Policy, and Management, Delft University of Technology, Delft, the Netherlands; 2: Cartagena Refinery. Ecopetrol S.A., Colombia; 3: Department of Energy, Aalborg University, Aalborg, Denmark.; 4: Department of Chemical Engineering, Faculty of Applied Sciences, Delft University of Technology, Delft, the Technical Assessment of direct air capture using piperazine in an advanced solvent-based absorption process University of Sheffield, United Kingdom TEA of co-processing refinery fuel gas and biogenic gas streams from thermochemical conversion for methanol synthesis 1: Aalborg University, Denmark; 2: Delft University of Technology, The Netherlands Surrogate Model-Based Optimisation of Pressure-Swing Distillation Sequences with Variable Feed Composition Department of Building Services and Process Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Hungary Unveiling Probability Histograms from Random Signals using a Variable-Order Quadrature Method of Moments 1: The University of Jordan, Jordan, Hashemite Kingdom of; 2: Johannes Kepler University; 3: RPTU Kaiserslautern Sensitivity Analysis of Key Parameters in LES-DEM Simulations of Fluidized Bed Systems Using generalized polynomial chaos UM6P, Morocco An Efficient Convex Training Algorithm for Artificial Neural Networks by Utilizing Piecewise Linear Approximations and Semi-Continuous Formulations 1: Department of Chemical and Biological Engineering, Koç University, Turkiye; 2: Department of Industrial Engineering, Koç University, Turkiye; 3: SmartOpt, Turkiye Economic evaluation of Solvay processes for sodium bicarbonate production with brine and carbon tax considerations Gas Processing Center, College of Engineering, Qatar University, Doha, Qatar THE GREEN HYDROGEN SUPPLY CHAIN IN THE BRAZILIAN STATE OF BAHIA: A DETERMINISTIC APPROACH 1: SENAI CIMATEC university center, Brazil; 2: Instituto Superior Técnico – Universidade de Lisboa, Portugal A combined approach to optimization of soft sensor architecture and physical sensor configuration 1: Process Systems Engineering Group, TU Dresden, Germany; 2: Chair of Process Control Systems, TU Dresden, Germany Machine Learning Models for Predicting the Amount of Nutrients Required in a Microalgae Cultivation System 1: Laboratory for Process Engineering, Environment, Biotechnology and Energy (LEPABE); 2: Associate Laboratory in Chemical Engineering (ALiCE); 3: Algae for Future (A4F); 4: LAQV-REQUIMTE Dynamical modeling of ultrafine particle classification in tubular bowl centrifuges 1: RPTU Kaiserslautern, Germany; 2: KIT Karlsruhe, Germany Towards a multi-scale process optimization coupling custom models for unit operations, process simulator, and environmental impact. 1: Centro de Química Estrutural, Instituto Superior Técnico, Portugal; 2: Institute of Inorganic Chemistry, RWTH Aachen University, Germany Enhancing hydrodynamics simulations in Distillation Columns Using Smoothed Particle Hydrodynamics (SPH) 1: TECNOLÓGICO NACIONAL DE MÉXICO/ CAMPUS IRAPUATO, MÉXICO; 2: UNIVERSIDAD DE GUANAJUATO, MÉXICO; 3: UNIVERSIDAD TECNOLÓGICA DE LEÓN, CAMPUS LEÓN, MÉXICO Electric arc furnace dust waste management: A process synthesis approach. 1: Instituto de Ingeniería Química, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay; 2: Viento Sur Ingeniería, Ruta 61, Km 19, Nueva Helvecia, Colonia, Uruguay.; 3: Grupo de Ingeniería de Materiales, Inst. Tecn. Reg. Sur-Oeste, Universidad Tecnológica del Uruguay, Horacio Meriggi 905, CP60000, Paysandú, Uruguay. Network theoretical analysis of the reaction space in biorefineries Intelligent Systems Department, Delft University of Technology, Netherlands Applying Quality by Design to Digital Twin Supported Scale-Up of Methyl Acetate Synthesis 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Chair of Process Control Systems; 3: TUD Dresden University of Technology, Process-to-Order Lab Digital Twin supported Model-based Design of Experiments and Quality by Design 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Process-to-Order Lab; 3: TUD Dresden University of Technology, Chair of Process Control Systems; 4: Merck Electronics KGaA, Frankfurter Str. 250, Darmstadt 64293, Germany Bioprocess control using hybrid mechanistic and Gaussian process modeling BioTeC+, Chemical & Biochemical Process Technology & Control, KU Leuven, Belgium Tune Decomposition Schemes for Large-Scale Mixed-Integer Programs by Bayesian Optimization 1: Pforzheim University of Applied Science, Germany; 2: University of Twente, The Netherlands Enhancing industrial symbiosis to reduce CO2 emissions in a Portuguese industrial park 1: Centro de Química Estrutural, IMS, Department of Chemical Engineering, Instituto Superior Técnico/Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa, Portugal; 2: RESILIENCE – Center for Regional Resilience and Sustainability, Escola Superior de Tecnologia do Barreiro, Instituto Politécnico de Setúbal, 2839-001 Lavradio, Portugal Blue Hydrogen Plant: Accurate Hybrid Model Based on Component Mass Flows and Simplified Thermodynamic Properties is Practically Linear McMaster University, Canada Synergies between the distillation of first- and second-generation sugarcane ethanol for sustainable biofuel production 1: Universidade Estadual de Campinas, Brazil; 2: Delft Universtity of Technology, The Netherlands; 3: National Renewable Energy Laboratory, United States; 4: Terragia Biofuel Incorporated, United States; 5: Dartmouth College, United States Development of anomaly detection models independent of noise and missing values using graph Laplacian regularization Department of Materials Process Engineering, Nagoya University, Japan Comparing incinerator kiln model predictions with measurements of industrial plants 1: Université de Lorraine, Nancy, France; 2: SUEZ, Schweighouse-sur-Moder, France Modeling the freeboard of a municipal waste incinerator 1: Université de Lorraine, Nancy, France; 2: SUEZ, Schweighouse-sur-Moder, France Superstructure as a communication tool in pre-emptive life cycle design engaging society: Findings from case studies on battery chemicals, plastics, and regional resources 1: The University of Tokyo, Japan; 2: Tokyo City University, Japan; 3: Waseda University, Japan A kinetic model for transesterification of vegetable oils catalyzed by sodium methylate—Insights from inline Raman spectroscopy Process Systems Engineering (AVT.SVT), RWTH Aachen University, 52074 Aachen, Germany Integration of renewable energy and reversible solid oxide cells to decarbonize secondary aluminium production and urban systems 1: Ecole Polytechnique Federale de Lausanne, Switzerland; 2: Novelis Sierre S.A. A Novel Symbol Recognition Framework for Digitization of Piping and Instrumentation Diagrams 1: Department of Chemical Engineering, Tsinghua University, Beijing, China; 2: Department of Computer Science and Engineering, University of California, San Diego, US; 3: Sinopec Ningbo Engineering Co., Ltd, Ningbo, China Twin Roll Press Washer Blockage Prediction: A Pulp and Paper Plant Case Study 1: Department of Chemical and Materials Engineering, The University of Auckland, Auckland 1010, New Zealand; 2: Ahuora – Centre for Smart Energy Systems, School of Engineering, The University of Waikato, Hamilton 3240, New Zealand Addressing Incomplete Physical Models in Chemical Processes: A Novel Physics-Informed Neural Network Approach Tsinghua University, China, People's Republic of A Physics-based, Data-driven Numerical Framework for Anomalous Diffusion of Water in Soil Oklahoma State University, United States of America Supersaturation Monitoring for Batch Crystallization using Empirical and Machine Learning Models Department of Chemical and Biochemical Engineering, Søltofts Plads, Building 228A, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark Role of process integration and renewable energy utilization for the decarbonization of the watchmaking sector. 1: EPFL, Switzerland; 2: HES-SO Valai Wallis, Switzerland An Integrated Machine Learning Framework for Predicting HPNA Formation in Hydrocracking Units Using Forecasted Operational Parameters 1: SOCAR Turkey, Digital Transformation Department, Istanbul 34485, Turkey; 2: SOCAR STAR Oil Refinery, Process Department, Aliaga, Izmir 35800, Turkey Towards the Decarbonization of a Conventional Ammonia Plant by the Gradual Incorporation of Green Hydrogen Centro de Recursos Naturais e Ambiente, Department of Chemical Engineering, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal Gate-to-Gate Life Cycle Assessment of CO₂ Utilisation in Enhanced Oil Recovery: Sustainability and Environmental Impacts in Dukhan Field, Qatar hbku, Qatar Robust Flowsheet Synthesis for Ethyl Acetate, Methanol and Water Separation Indian institute of technology Kanpur, India Integrating offshore wind energy into the optimal deployment of a hydrogen supply chain: a case study in Occitanie 1: France Energies Marines / Laboratoire de Génie Chimique, France; 2: France Énergies Marines, Technopôle Brest-Iroise, 525 Avenue Alexis de Rochon, 29280, Plouzané, France Robust Techno-economic Analysis, Life Cycle Assessment, and Quality by-Design of Three Alternative Continuous Pharmaceutical Tablet Manufacturing Processes Loughborough University, United Kingdom Systematic Model Builder, Model-Based Design of Experiments, and Design Space Identification for A Multistep Pharmaceutical Process Loughborough University, United Kingdom The role of long-term storage in municipal solid waste treatment systems: Multi-objective resources integration 1: École Polytechnique Fédérale de Lausanne (EPFL), Industrial Process Energy Systems Engineering (IPESE), Sion, 1951, Switzerland; 2: Kanadevia Inova AG, Zürich, 8005, Switzerland A Comparative Study of Feature Importance in Process Data: Neural Networks vs. Human Visual Attention 1: Department of Applied Mechanics and Biomedical Engineering, Indian Institute of Technology Madras, Chennai 600036, India; 2: Department of Chemical Engineering, Indian Institute of Technology Madras, Chennai 600036, India; 3: American Express Lab for Data Analytics, Risk and Technology Indian Institute of Technology Madras, Chennai 600036, India Parameter Estimation and Model Comparison for Mixed Substrate Biomass Fermentation King's College London, United Kingdom Identification of Suitable Operational Conditions and Dimensions for Supersonic Water Separation in Exhaust Gases from Offshore Turbines: A Case Study 1: SENAI CIMATEC University Center, Brazil; 2: Leopoldo Américo Miguez de Mello Research Center (CENPES); 3: Federal University of Rio de Janeiro (UFRJ) On optimal hydrogen production pathway selection using the SECA multi-criteria decision-making method University of the Witwatersrand, South Africa On the role of Artificial Intelligence in Feature oriented Multi-Criteria Decision Analysis 1: Industrial Process and Energy Systems Engineering (IPESE), Ecole Polytechnique Fédérale de Lausanne, Sion, Switzerland; 2: École Polytechnique, France Optimizing CO2 Utilization in Reverse Water-Gas Shift Membrane Reactors with Parametric PINNs 1: Department of Chemical & Biomolecular Engineering, University of Connecticut, Storrs, CT 06269, USA; 2: Center for Clean Energy Engineering, University of Connecticut, Storrs, CT 06269, USA; 3: The Wolfson Department of Chemical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel Modeling, simulation and optimization of a carbon capture process through a fluidized TSA column 1: Polytechnic School of the University of Sao Paulo, Brazil; 2: Federal University of Ceará, Brazil Unlocking Process Dynamics: Interpretable PDE Solutions via Symbolic Regression University of Connecticut, USA Eco-Designing Pharmaceutical Supply Chains: A Process Engineering Approach to Life Cycle Inventory Generation 1: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France; 2: Tecnologico Nacional de México, Instituto Tecnológico de Orizaba, México; 3: Universidad Autónoma de Yucatán, Facultad de Ingeniería Química, Mérida, Yucatán, México Safe Reinforcement Learning with Lyapunov-Based Constraints for Control of an Unstable Reactor 1: Chemical and Biochemical Process Engineering Program/School of Chemistry, Universidade Federal do Rio de Janeiro (UFRJ), Brazil; 2: Chemical Engineering Program/COPPE, Universidade Federal do Rio de Janeiro (UFRJ), Brazil; 3: Sargent Centre for Process Systems Engineering, Imperial College London A two-level model to assess the economic feasibility of renewable urea production from agricultural wastes Universidade de São Paulo, Brazil Computer-based Chemical Engineering Education for Green and Digital Transformation Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova ulica 17, SI-2000 Maribor, Slovenia Development of a Hybrid Model for the Paracetamol Batch Dissolution in Ethanol Using Universal Differential Equations 1: School of Chemistry, EPQB, Universidade Federal do Rio de Janeiro, Av. Horácio Macedo, 2030, CT, Bloco E, 21941-914, Rio de Janeiro, RJ – Brazil; 2: Chemical Engineering Department, Norwegian University of Science and Technology, Trondheim, 793101, Norway; 3: Instituto de Química, Rio de Janeiro State University (UERJ), Rua São Francisco Xavier, 524, Maracanã, Rio de Janeiro, RJ, 20550-900, Brazil; 4: PEQ/COPPE – Universidade Federal do Rio de Janeiro, Av. Horácio Macedo, 2030, CT, Bloco G, G115, 21941-914, Rio de Janeiro, RJ – Brazil Novel PSE applications and knowledge transfer in joint industry - university energy-related postgraduate education 1: Optimisation of Production Systems Lab., University of West Attica; 2: Hellenic Energy S.A,; 3: Soft Energy Applications and Environmental Protection Lab., University of West Attica Optimal Operation of Middle Vessel Batch Distillation using an Economic MPC IIT Bombay, India Recurrent deep learning models for multi-step ahead prediction: comparison and evaluation for real Electrical Submersible Pump (ESP) system. 1: Norwegian University of Science and Technology, Norway; 2: Federal University of Bahia, Brazil; 3: CENPES, Petrobras R&D Center, Brazil Simulation and optimisation of vacuum (pressure) swing adsorption with simultaneous consideration of real vacuum pump data and bed fluidisation Centre for Process Integration, Department of Chemical Engineering, School of Engineering, The University of Manchester, United Kingdom Sociotechnical Transition: An Exploratory Study on the Social Appropriability of Users of Smart Meters in Wallonia. Université de Mons, Belgium Optimizing Methane Conversion in a Flow Reactor System Using Bayesian Optimization and Fisher Information Matrix Driven Experimental Design Approaches: A Comparative Study University College London, United Kingdom OPTIMAL CONTROL OF PSA UNITS BASED ON EXTREMUM SEEKING 1: Laboratory of Separation and Reaction Engineering−Laboratory of Catalysis and Materials (LSRE LCM), Department of Chemical Engineering, University of Porto, Porto, 4200-465, Portugal; 2: ALiCE−Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Porto, 4200-465, Portugal; 3: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 4, Kjemiblokk 5, Trondheim, 793101, Norway Enhancing Higher Education Capacity for Sustainable Data Driven Food Systems in Indonesia – FIND4S 1: BioTeC+, Chemical & Biochemical Process Technology & Control, KU Leuven, Belgium; 2: Department of Food Technology, Diponegoro University, Indonesia Optimization of Specific Heat Transfer Area for Multiple Effects Desalination (MED) Process 1: Sirte University, Libya; 2: Sirte Oil Company, National Oil Corporation, Libya; 3: University of Bradford, United Kingdom Companies’ operation and trading strategies under the triple trading of electricity, carbon quota and commodities: A game theory optimization modelling 1: State Key Lab of Power System Operation and Control, Department of Energy and Power Engineering, Tsinghua-BP Clean Energy Centre, Tsinghua University, Beijing, 100084, China; 2: Department of Chemical Engineering, Imperial College London, SW7 2AZ, United Kingdom Solvent and emission source dependent amine-based CO2 capture costs estimation methodology for systemic level analysis 1: Ecole Polytechnique Fédérale de Lausanne, Switzerland; 2: TotalEnergies OneTech, France Energy Planning Toward Absolute Environmental Sustainability: Key Decisions and Actionable Insights Through Interpretable Machine Learning 1: Université catholique de Louvain, Belgium; 2: Vrije Universiteit Brussel, Belgium |
|||||||
| 1:30pm - 2:30pm |
Brewery visit Location: On-campus brewery |
||||||||
| 2:00pm - 4:00pm |
T1: Modelling and Simulation - Session 6 Location: Zone 3 - Room D016 Chair: Rofice Dickson Co-chair: Arnaud DUJANY A Comparative Evaluation of Complexity in Mechanistic and Surrogate Modeling Approaches for Digital Twins 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Chair of Process Control Systems; 3: TUD Dresden University of Technology, Process-to-Order Lab 2:20pm - 2:40pm Data-Driven Dynamic Process Modeling Using Temporal RNN Incorporating Output Variable Autocorrelation and Stacked Autoencoder 1: Zhejiang University, China, People's Republic of; 2: College of Chemical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang, 310014, China.; 3: Zhejiang Amino-Chem Co., Ltd, Shaoxing, Zhejiang, 312369, China.; 4: Huzhou Institute of Industrial Control Technology, Zhejiang, China. 2:40pm - 3:00pm Mathematical Modeling of Electrolyzer-Pressure Retarded Membrane Distillation (E-PRMD) Hybrid Process for Energy-efficient Wastewater Treatment and Multi-functional Desalination System 1: Chonnam National University, Korea, Republic of (South Korea); 2: Hanyang University , Korea, Republic of (South Korea) 3:00pm - 3:20pm Cell culture process dynamics and metabolic flux distributions using hybrid models Technical University of Denmark, Denmark 3:20pm - 3:40pm Comparative Analysis of Green Methanol Production Systems via Electrochemical Reduction and Hydrogenation 1: University of Surrey, United Kingdom; 2: University of Cagliari, Italy 3:40pm - 4:00pm Dynamic analysis for prediction of flow patterns in an oscillatory baffled reactor using machine learning 1: Institute of Science Tokyo, Japan; 2: Yasuda Women’s University, Japan |
T1: Modelling and Simulation - Session 7 Location: Zone 3 - Room D049 Chair: Erik Esche Simulation and Experimental Validation of Biomass Gasification in a Spouted Bed Reactor: Optimization and Troubleshooting Using DWSIM Università di Genova, Italy 2:20pm - 2:40pm Thermodynamic Feasibility of High-Temperature Heat Pumps in CO2 Capture Systems University of Liège, Belgium 2:40pm - 3:00pm Comparative Assessment of Aspen Plus Modelling Strategies for Biomass Steam Co-gasification Departamento de Ingeniería Química Industrial Y del Medioambiente, Escuela Superior de Ingenieros Industriales, Universidad Politécnica de Madrid 3:00pm - 3:20pm Enhancing the Technical and Economic Performance of Proton Exchange Membrane Fuel Cells Through Three Critical Advancements 1: Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture,University of Split, Croatia; 2: University of Defense and Security "Dr. Franjo Tuđman"; 3: University of Surrey, UK 3:20pm - 3:40pm Multiscale Modeling of Internal Reforming in Solid Oxide Fuel Cells: A Study of Electrode Morphology and Gradient Microstructures University of Manchester, United Kingdom |
T2: Sustainable Product Development and Process Design - Session 6 Location: Zone 3 - Room E032 Chair: Edgar Ramirez Co-chair: Guido Sand Decarbonzed Hydrogen Production: Integrating Renewable Energy into Electrified SMR Process with CO₂ Capture 1: Department of Chemical Engineering, Hanyang University, Republic of Korea (South Korea); 2: FG Prozess- und Anlagentechnik, Brandenburgische Technische Universitat Cottbus-Senftenberg, Germany 2:20pm - 2:40pm Optimised integration strategies for the PMR based H2 production with CO2 capture process 1: SINTEF Energy Research; 2: Norwegian University of Science and Technology (NTNU); 3: SINTEF Industry 2:40pm - 3:00pm Assessing the Synergies of Thermochemical Energy Storage with Concentrated Solar Power and Carbon Capture Department of Chemical Engineering, Indian Institute of Technology Kanpur, Kanpur 208016, India 3:00pm - 3:20pm Material screening and process optimization for membrane-based carbon capture via machine learning models EPFL, Switzerland 3:20pm - 3:40pm Modeling MEA Solvent Degradation in CO2 Capture: A Comparative Analysis Across Key Industrial Sectors in Belgium ULiège, Belgium 3:40pm - 4:00pm Integrating Direct Air Capture and HVAC Systems: A Techno-Economic Perspective on Efficiency and Cost Savings 1: College of Science and Engineering, Hamad Bin Khalifa University, Qatar; 2: Qatar Environment and Energy Institute (QEERI), Hamad Bin Khalifa University, Qatar |
T3: Large Scale Design and Planning/ Scheduling - Session 5 Location: Zone 3 - Aula D002 Chair: Michael Short Co-chair: Marianne Boix Materials-Related Challenges of Energy Transition 1: Universitat Rovira i Virgili, Spain; 2: Imperial College London, UK 2:20pm - 2:40pm Development of a hybrid, semi-parametric Simulation Model of an AEM Electrolysis Stack Module for large-scale System Simulations 1: TUD Dresden University of Technology, Chair of Process Control Systems; 2: TUD Dresden University of Technology, Process Systems Engineering Group; 3: TUD Dresden University of Technology, Process-to-Order Lab 2:40pm - 3:00pm Energy system modelling for studying flexibility on industrial sites SINTEF Energy Research, Norway 3:00pm - 3:20pm An MIQCP Reformulation for the Optimal Synthesis of Thermally Coupled Distillation Networks 1: Carnegie Mellon University, United States of America; 2: Braskem, 550 Technology Dr., Pittsburgh, PA 3:20pm - 3:40pm A Blockchain -Supported Framework for Transparent Resource Trading and Emission Management in Eco-Industrial Parks (EIPs) 1: Texas A&M university, Qatar; 2: Texas A&M university, College Station 3:40pm - 4:00pm A digital scheduling hub for natural gas processing: a Petrobras case-study using rigorous process simulation 1: Petrobras – Petróleo Brasileiro S.A., Brazil; 2: Chemical Engineering Program/COPPE, Federal University of Rio de Janeiro, Brazil; 3: CELIGA Electric Maintenance Ltda, Brazil; 4: School of CHemistry, Federal University of Rio de Janeiro, Brazil |
T4: Model Based optimisation and advanced Control - Session 5 Location: Zone 3 - Aula E036 Chair: Sigurd Skogestad Co-chair: Mattia Vallerio Utilizing ML surrogates in CAPD: Case study for an amine-based carbon capture process Department of Chemical Engineering, Sargent Centre for Process Systems Engineering, Institute for Molecular Science and Engineering, Imperial College London, SW7 2AZ, London, UK 2:20pm - 2:40pm Accelerating Solvent Design Optimisation with a Group-Contribution Machine Learning Surrogate Model for Phase Stability epartment of Chemical Engineering, The Sargent Centre for Process Systems Engineering, Imperial College London, London, SW7 2AZ, United Kingdom 2:40pm - 3:00pm Open-loop surrogate modeling for process optimization Institute for Chemical and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zürich, Vladimir-Prelog-Weg 1, Zürich 8093, Switzerland 3:00pm - 3:20pm Optimal design of extraction-distillation hybrid processes by combining equilibrium and rate-based modeling 1: Hamburg University of Technology, Institute of Process Systems Engineering, Am Schwarzenberg-Campus 4, 21073 Hamburg, Germany; 2: RWTH Aachen University, Chair of Fluid Process Engineering, Forckenbeckstraße 51, 52074 Aachen, Germany 3:20pm - 3:40pm Mathematical Modelling and Optimisation of the Cryogenic Distillation Processes used for Hydrogen Isotope Separation in the Fusion Fuel Cycle 1: School of Chemistry & Chemical Engineering, University of Surrey, GU2 7XH, Guildford, UK; 2: UK Atomic Energy Authority, Culham Science Centre, OX14 3DB, Abingdon, UK |
T5: Concepts, Methods and Tools - Session 5 Location: Zone 3 - Room E033 Co-chair: Yasunori Kikuchi The Paradigm of Water and Energy Integration Systems (WEIS): Methodology and Performance Indicators 1: Research, Develoment and Innovation, Instituto de Soldadura e Qualidade, 2740-120 Porto Salvo, Portugal; 2: Department of Chemical Engineering, Instituto Superior Técnico, Avenida Rovisco Pais 1, 1049-001 Lisboa, Portugal; 3: Department of Computer Science and Engineering, Instituto Superior Técnico, Avenida Rovisco Pais 1, 1049-001 Lisboa, Portugal 2:20pm - 2:40pm Cooperative Price Fixation Strategy to Support the Formation of Industrial Symbiosis Networks Universitat Politècnica de Catalunya 2:40pm - 3:00pm Decision Support Tool for Sustainable Small to Medium-Volume Natural Gas Utilization Department of Chemical Engineering, Polytechnic School, University of Sao Paulo, Brazil, Brazil 3:00pm - 3:20pm Prospective life cycle design enhanced by computer aided process modeling: A case study of Air Conditioners The University of Tokyo, Japan 3:20pm - 3:40pm Life-Cycle Assessment of Chemical Sugar Synthesis Based on Process Design for Biomanufacturing 1: Presidential Endowed Chair for “Platinum Society”, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan; 2: Research Center for Solar Energy Chemistry, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka, Osaka 560-8531, Japan; 3: Research Center for Advanced Science and Technology, LCA Center for Future Strategy, The University of Tokyo, 4-6-1, Komaba, Meguro-ku, Tokyo 153-8904, Japan; 4: Department of Chemical System Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan; 5: Institute for Future Initiatives, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8654, Japan 3:40pm - 4:00pm Handling discrete decisions in bilevel optimization via neural network embeddings Institute of Chemical Process Engineering, Univeristy of Alicante, Spain |
T6: Digitalization and AI - Session 4 Location: Zone 3 - Room E030 Chair: Jinsong Zhao Co-chair: Goerge M. Bollas Optimal design and control of chemical reactors using PINN-based frameworks Institute of Chemical Process Engineering, Univeristy of Alicante, Spain 2:20pm - 2:40pm Picard-KKT-hPINN: Enforcing nonlinear enthalpy balances for physically consistent neural networks 1: Delft University of Technology, Department of Chemical Engineering, Process Intelligence Research Group, Van der Maasweg 9, 2629 HZ, Delft, The Netherlands; 2: Delft University of Technology, Delft Institute of Applied Mathematics, Mathematical Physics Group, Mekelweg 4, 2628 CD, Delft, The Netherlands 2:40pm - 3:00pm Physics-informed Data-driven control of Electrochemical Separation Processes Louisiana State University, United States of America 3:00pm - 3:20pm Physics-Informed Graph Neural Networks for Spatially Distributed Dynamically Operated Systems 1: Process Systems Engineering, Max Planck Institute for Dynamics of Complex Technical Systems, Sandtorstr. 1, 39106 Magdeburg, Germany.; 2: Chair for Process Systems Engineering, Otto-von-Guericke University, Universitaetsplatz 2, 39106 Magdeburg, Germany. 3:20pm - 3:40pm A Physics-Informed Approach to Dynamic Modeling and Parameter Estimation in Biotechnology National Technical Univeristy of Athens, Greece |
T7: CAPEing with Societal Challenges - Session 4 Location: Zone 3 - Room E031 Chair: Ryan Muir Co-chair: Stavros Papadokonstantakis Lignocellulosic Waste Supply Chain Network Design for Sustainable Aviation Fuels Production through Solar Pyrolysis 1: Research Group Process Systems Engineering for Sustainable Resources, Institute of Chemical, Environmental and Bioscience Engineering, Faculty of Technical Chemistry, Vienna University of Technology, 1060 Vienna, Austria; 2: Research Group Energy Conversion and Systems, Department of Mechanical Engineering, School of Engineering, Aalto University, 02150 Espoo, Finland 2:20pm - 2:40pm Optimization of prospective circular economy in sewage sludge to biofuel production pathway via HTL system using P-graph 1: Institute of Chemical, Environmental and Bioscience Engineering TU Wien,1060 Wien, Austria; 2: Engineering and Technology Institute Groningen (ENTEG), Faculty of Science and Engineering, University of Groningen, Nijenborgh 3, Groningen, 9747 AG, The Netherlands 2:40pm - 3:00pm A techno-economic optimization approach to an integrated biogas and hydrogen supply chain. 1: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse France; 2: Posgrado de Ingeniería Química, Universidad Michoacana de San Nicolás de Hidalgo, Morelia, Michoacán, México 3:00pm - 3:20pm Socioeconomic Impacts and Land Use Change of Integrating Biofuel Production with Livestock Farming in Brazil: A Computable General Equilibrium (CGE) Approach 1: University of Campinas (UNICAMP), Brazil; 2: Brazilian Center for Research in Energy and Materials (CNPEM), Brazil; 3: Brazilian Agricultural Research Corporation (Embrapa), Brazil; 4: INESC TEC - University of Porto, Portugal 3:20pm - 3:40pm Optimization of Sustainable Fuel Station Retrofitting: A Set-Covering Approach considering Environmental and Economic Objectives IQS School of Engineering, Universitat Ramon Llull, Via Augusta 390, 08017 Barcelona, Spain. |
|
| 4:00pm - 4:30pm |
Coffee Break Location: Zone 2 - Cafetaria |
Poster Session 2 Location: Zone 2 - Cafetaria Rebalancing CAPEX and OPEX to Mitigate Uncertainty and Enhance Energy Efficiency in Renewable Energy-Fed Chemical Processes LGC (INP - ENSIACET), France Operational and Economic Feasibility of Green Solvent-Based Extractive Distillation for 1,3-Butadiene Recovery: A Comparison with Conventional Toxic Solvents 1: LEPABE / ALiCE, Faculdade de Engenharia da Universidade do Porto; 2: Repsol Polímeros, S.A., Complexo Petroquímico; 3: CERENA, Instituto Superior Técnico Optimizing Heat Recovery: Advanced Design of Integrated Heat Exchanger Networks with ORCs and Heat Pumps Universidad de Alicante, Spain CO2 recycling plant for decarbonizing hard-to-abate industries: Empirical modelling and Process design of a CCU plant- A case study Departamento de Ingenierías Química y Biomolecular, Universidad de Cantabria Integration of direct air capture with CO2 utilization technologies powered by renewable energy sources to deliver negative carbon emissions 1: Babes-Bolyai University, Faculty of Chemistry and Chemical Engineering, Romania; 2: National Institute for Research and Development of Isotopic and Molecular Technologies, Romania Repurposing Existing Combined Cycle Power Plants with Methane Production for Renewable Energy Storage Department of Chemical Engineering, University of Salamanca, Plz Caidos 1-5, 37008, Salamanca, Spain Powering chemical processes with variable renewable energy: A case of iron making in steel industry University of Oxford, United Kingdom Early-Stage Economic and Environmental Assessment for Emerging Chemical Technologies: Back-casting Approach Chungnam National University, Korea, Republic of (South Korea) A White-Box AI Framework for Interpretable Global Warming Potential Prediction King's College London, United Kingdom Data-driven approach for reaction mechanism identification using neural ODEs 1: The University of Tokyo, Japan; 2: Auxilart Co., Ltd., Tokyo, 104-0061, Japan; 3: Institute of Physical and Chemical Research, Hyogo, 660-0813, Japan; 4: Independent researcher, Japan Generalised Disjunctive Programming for Process Synthesis Technische Universität Berlin, Germany Optimal Design and Operation of Off-Grid Electrochemical Nitrogen Reduction to Ammonia 1: RWTH Aachen University, Germany; 2: JARA-ENERGY, 52056 Aachen, Germany; 3: Energy Systems Engineering (ICE-1), Forschungszentrum Jülich, Germany A Stochastic Techno-Economic Assessment of Emerging Artificial Photosynthetic Bio-Electrochemical Systems for CO₂ Conversion Oxford University, United Kingdom Empowering LLMs for Mathematical Reasoning and Optimization: A Multi-Agent Symbolic Regression System Siemens Technology and Services Pvt. Ltd Solid Oxide Cells and Hydrogen Storage to Prevent Grid Congestion École Polytechnique Fédérale de Lausanne, Switzerland A Modern Portfolio Theory Approach for Chemical Production with Supply Chain Considerations for Efficient Investment Planning Texas A&M University at Qatar, Qatar Co-gasification of crude glycerol and plastic waste using air/steam mixtures: a modelling approach UNIVERSITY OF SOUTH AFRICA, South Africa COMPARATIVE AND STATISTICAL STUDY ON ASPEN PLUS INTERFACES USED FOR STOCHASTIC OPTIMIZATION 1: Universidad de Guanajuato, Mexico; 2: Pontificia Universidad Católica del Perú, Peru; 3: Instituto Tecnológico Superior de Guanajuato, Mexico 3D simulation and design of MEA-based absorption system for biogas purification National Cheng Kung University, Taiwan Enhancing Chemical Process Design: Aligning DEXPI Process with BPMN 2.0 for Improved Efficiency in Data Exchange 1: Process Dynamics and Operations Group, Technische Universität Berlin, Berlin, Germany; 2: Semtation GmbH, Potsdam, Germany Linear and non-linear convolutional approaches and XAI for spectral data: classification of waste lubricant oils University of Coimbra, Portugal Mathematical Modeling of Ammonia Nitrogen Dynamics in RAS Integrated with Bayesian Parameter Optimization 1: School of Chemistry and Chemical Engineering, University of Surrey, United Kingdom; 2: School of Sustainability, Civil and Environmental Engineering, University of Surrey, United Kingdom; 3: National Innovation Center for Digital Fishery, China Agricultural University,China Computer-Aided Design of a Local Biorefinery Scheme from Water lily (Eichhornia Crassipes) to Produce Power and Bioproducts 1: Universidad Michoacana de San Nicolás de Hidalgo, Facultad de Ingeniería Química, México; 2: Universidad Autónoma de Querétaro, Facultad de Ingeniería, Mexico; 3: Universidad Veracruzana, Instituto de Investigaciones Forestales, México System analysis and optimization of replacing surplus refinery fuel gas by coprocessing with HTL bio-crude off-gas in oil refineries. 1: Department of Engineering Systems and Services, Faculty of Technology, Policy, and Management, Delft University of Technology, Delft, the Netherlands; 2: Cartagena Refinery. Ecopetrol S.A., Colombia; 3: Department of Energy, Aalborg University, Aalborg, Denmark.; 4: Department of Chemical Engineering, Faculty of Applied Sciences, Delft University of Technology, Delft, the Technical Assessment of direct air capture using piperazine in an advanced solvent-based absorption process University of Sheffield, United Kingdom TEA of co-processing refinery fuel gas and biogenic gas streams from thermochemical conversion for methanol synthesis 1: Aalborg University, Denmark; 2: Delft University of Technology, The Netherlands Surrogate Model-Based Optimisation of Pressure-Swing Distillation Sequences with Variable Feed Composition Department of Building Services and Process Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Hungary Unveiling Probability Histograms from Random Signals using a Variable-Order Quadrature Method of Moments 1: The University of Jordan, Jordan, Hashemite Kingdom of; 2: Johannes Kepler University; 3: RPTU Kaiserslautern Sensitivity Analysis of Key Parameters in LES-DEM Simulations of Fluidized Bed Systems Using generalized polynomial chaos UM6P, Morocco An Efficient Convex Training Algorithm for Artificial Neural Networks by Utilizing Piecewise Linear Approximations and Semi-Continuous Formulations 1: Department of Chemical and Biological Engineering, Koç University, Turkiye; 2: Department of Industrial Engineering, Koç University, Turkiye; 3: SmartOpt, Turkiye Economic evaluation of Solvay processes for sodium bicarbonate production with brine and carbon tax considerations Gas Processing Center, College of Engineering, Qatar University, Doha, Qatar THE GREEN HYDROGEN SUPPLY CHAIN IN THE BRAZILIAN STATE OF BAHIA: A DETERMINISTIC APPROACH 1: SENAI CIMATEC university center, Brazil; 2: Instituto Superior Técnico – Universidade de Lisboa, Portugal A combined approach to optimization of soft sensor architecture and physical sensor configuration 1: Process Systems Engineering Group, TU Dresden, Germany; 2: Chair of Process Control Systems, TU Dresden, Germany Machine Learning Models for Predicting the Amount of Nutrients Required in a Microalgae Cultivation System 1: Laboratory for Process Engineering, Environment, Biotechnology and Energy (LEPABE); 2: Associate Laboratory in Chemical Engineering (ALiCE); 3: Algae for Future (A4F); 4: LAQV-REQUIMTE Dynamical modeling of ultrafine particle classification in tubular bowl centrifuges 1: RPTU Kaiserslautern, Germany; 2: KIT Karlsruhe, Germany Towards a multi-scale process optimization coupling custom models for unit operations, process simulator, and environmental impact. 1: Centro de Química Estrutural, Instituto Superior Técnico, Portugal; 2: Institute of Inorganic Chemistry, RWTH Aachen University, Germany Enhancing hydrodynamics simulations in Distillation Columns Using Smoothed Particle Hydrodynamics (SPH) 1: TECNOLÓGICO NACIONAL DE MÉXICO/ CAMPUS IRAPUATO, MÉXICO; 2: UNIVERSIDAD DE GUANAJUATO, MÉXICO; 3: UNIVERSIDAD TECNOLÓGICA DE LEÓN, CAMPUS LEÓN, MÉXICO Electric arc furnace dust waste management: A process synthesis approach. 1: Instituto de Ingeniería Química, Facultad de Ingeniería, Universidad de la República, Montevideo, 11300, Uruguay; 2: Viento Sur Ingeniería, Ruta 61, Km 19, Nueva Helvecia, Colonia, Uruguay.; 3: Grupo de Ingeniería de Materiales, Inst. Tecn. Reg. Sur-Oeste, Universidad Tecnológica del Uruguay, Horacio Meriggi 905, CP60000, Paysandú, Uruguay. Network theoretical analysis of the reaction space in biorefineries Intelligent Systems Department, Delft University of Technology, Netherlands Applying Quality by Design to Digital Twin Supported Scale-Up of Methyl Acetate Synthesis 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Chair of Process Control Systems; 3: TUD Dresden University of Technology, Process-to-Order Lab Digital Twin supported Model-based Design of Experiments and Quality by Design 1: TUD Dresden University of Technology, Process Systems Engineering Group; 2: TUD Dresden University of Technology, Process-to-Order Lab; 3: TUD Dresden University of Technology, Chair of Process Control Systems; 4: Merck Electronics KGaA, Frankfurter Str. 250, Darmstadt 64293, Germany Bioprocess control using hybrid mechanistic and Gaussian process modeling BioTeC+, Chemical & Biochemical Process Technology & Control, KU Leuven, Belgium Tune Decomposition Schemes for Large-Scale Mixed-Integer Programs by Bayesian Optimization 1: Pforzheim University of Applied Science, Germany; 2: University of Twente, The Netherlands Enhancing industrial symbiosis to reduce CO2 emissions in a Portuguese industrial park 1: Centro de Química Estrutural, IMS, Department of Chemical Engineering, Instituto Superior Técnico/Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa, Portugal; 2: RESILIENCE – Center for Regional Resilience and Sustainability, Escola Superior de Tecnologia do Barreiro, Instituto Politécnico de Setúbal, 2839-001 Lavradio, Portugal Blue Hydrogen Plant: Accurate Hybrid Model Based on Component Mass Flows and Simplified Thermodynamic Properties is Practically Linear McMaster University, Canada Synergies between the distillation of first- and second-generation sugarcane ethanol for sustainable biofuel production 1: Universidade Estadual de Campinas, Brazil; 2: Delft Universtity of Technology, The Netherlands; 3: National Renewable Energy Laboratory, United States; 4: Terragia Biofuel Incorporated, United States; 5: Dartmouth College, United States Development of anomaly detection models independent of noise and missing values using graph Laplacian regularization Department of Materials Process Engineering, Nagoya University, Japan Comparing incinerator kiln model predictions with measurements of industrial plants 1: Université de Lorraine, Nancy, France; 2: SUEZ, Schweighouse-sur-Moder, France Modeling the freeboard of a municipal waste incinerator 1: Université de Lorraine, Nancy, France; 2: SUEZ, Schweighouse-sur-Moder, France Superstructure as a communication tool in pre-emptive life cycle design engaging society: Findings from case studies on battery chemicals, plastics, and regional resources 1: The University of Tokyo, Japan; 2: Tokyo City University, Japan; 3: Waseda University, Japan A kinetic model for transesterification of vegetable oils catalyzed by sodium methylate—Insights from inline Raman spectroscopy Process Systems Engineering (AVT.SVT), RWTH Aachen University, 52074 Aachen, Germany Integration of renewable energy and reversible solid oxide cells to decarbonize secondary aluminium production and urban systems 1: Ecole Polytechnique Federale de Lausanne, Switzerland; 2: Novelis Sierre S.A. A Novel Symbol Recognition Framework for Digitization of Piping and Instrumentation Diagrams 1: Department of Chemical Engineering, Tsinghua University, Beijing, China; 2: Department of Computer Science and Engineering, University of California, San Diego, US; 3: Sinopec Ningbo Engineering Co., Ltd, Ningbo, China Twin Roll Press Washer Blockage Prediction: A Pulp and Paper Plant Case Study 1: Department of Chemical and Materials Engineering, The University of Auckland, Auckland 1010, New Zealand; 2: Ahuora – Centre for Smart Energy Systems, School of Engineering, The University of Waikato, Hamilton 3240, New Zealand Addressing Incomplete Physical Models in Chemical Processes: A Novel Physics-Informed Neural Network Approach Tsinghua University, China, People's Republic of A Physics-based, Data-driven Numerical Framework for Anomalous Diffusion of Water in Soil Oklahoma State University, United States of America Supersaturation Monitoring for Batch Crystallization using Empirical and Machine Learning Models Department of Chemical and Biochemical Engineering, Søltofts Plads, Building 228A, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark Role of process integration and renewable energy utilization for the decarbonization of the watchmaking sector. 1: EPFL, Switzerland; 2: HES-SO Valai Wallis, Switzerland An Integrated Machine Learning Framework for Predicting HPNA Formation in Hydrocracking Units Using Forecasted Operational Parameters 1: SOCAR Turkey, Digital Transformation Department, Istanbul 34485, Turkey; 2: SOCAR STAR Oil Refinery, Process Department, Aliaga, Izmir 35800, Turkey Towards the Decarbonization of a Conventional Ammonia Plant by the Gradual Incorporation of Green Hydrogen Centro de Recursos Naturais e Ambiente, Department of Chemical Engineering, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal Gate-to-Gate Life Cycle Assessment of CO₂ Utilisation in Enhanced Oil Recovery: Sustainability and Environmental Impacts in Dukhan Field, Qatar hbku, Qatar Robust Flowsheet Synthesis for Ethyl Acetate, Methanol and Water Separation Indian institute of technology Kanpur, India Integrating offshore wind energy into the optimal deployment of a hydrogen supply chain: a case study in Occitanie 1: France Energies Marines / Laboratoire de Génie Chimique, France; 2: France Énergies Marines, Technopôle Brest-Iroise, 525 Avenue Alexis de Rochon, 29280, Plouzané, France Robust Techno-economic Analysis, Life Cycle Assessment, and Quality by-Design of Three Alternative Continuous Pharmaceutical Tablet Manufacturing Processes Loughborough University, United Kingdom Systematic Model Builder, Model-Based Design of Experiments, and Design Space Identification for A Multistep Pharmaceutical Process Loughborough University, United Kingdom The role of long-term storage in municipal solid waste treatment systems: Multi-objective resources integration 1: École Polytechnique Fédérale de Lausanne (EPFL), Industrial Process Energy Systems Engineering (IPESE), Sion, 1951, Switzerland; 2: Kanadevia Inova AG, Zürich, 8005, Switzerland A Comparative Study of Feature Importance in Process Data: Neural Networks vs. Human Visual Attention 1: Department of Applied Mechanics and Biomedical Engineering, Indian Institute of Technology Madras, Chennai 600036, India; 2: Department of Chemical Engineering, Indian Institute of Technology Madras, Chennai 600036, India; 3: American Express Lab for Data Analytics, Risk and Technology Indian Institute of Technology Madras, Chennai 600036, India Parameter Estimation and Model Comparison for Mixed Substrate Biomass Fermentation King's College London, United Kingdom Identification of Suitable Operational Conditions and Dimensions for Supersonic Water Separation in Exhaust Gases from Offshore Turbines: A Case Study 1: SENAI CIMATEC University Center, Brazil; 2: Leopoldo Américo Miguez de Mello Research Center (CENPES); 3: Federal University of Rio de Janeiro (UFRJ) On optimal hydrogen production pathway selection using the SECA multi-criteria decision-making method University of the Witwatersrand, South Africa On the role of Artificial Intelligence in Feature oriented Multi-Criteria Decision Analysis 1: Industrial Process and Energy Systems Engineering (IPESE), Ecole Polytechnique Fédérale de Lausanne, Sion, Switzerland; 2: École Polytechnique, France Optimizing CO2 Utilization in Reverse Water-Gas Shift Membrane Reactors with Parametric PINNs 1: Department of Chemical & Biomolecular Engineering, University of Connecticut, Storrs, CT 06269, USA; 2: Center for Clean Energy Engineering, University of Connecticut, Storrs, CT 06269, USA; 3: The Wolfson Department of Chemical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel Modeling, simulation and optimization of a carbon capture process through a fluidized TSA column 1: Polytechnic School of the University of Sao Paulo, Brazil; 2: Federal University of Ceará, Brazil Unlocking Process Dynamics: Interpretable PDE Solutions via Symbolic Regression University of Connecticut, USA Eco-Designing Pharmaceutical Supply Chains: A Process Engineering Approach to Life Cycle Inventory Generation 1: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France; 2: Tecnologico Nacional de México, Instituto Tecnológico de Orizaba, México; 3: Universidad Autónoma de Yucatán, Facultad de Ingeniería Química, Mérida, Yucatán, México Safe Reinforcement Learning with Lyapunov-Based Constraints for Control of an Unstable Reactor 1: Chemical and Biochemical Process Engineering Program/School of Chemistry, Universidade Federal do Rio de Janeiro (UFRJ), Brazil; 2: Chemical Engineering Program/COPPE, Universidade Federal do Rio de Janeiro (UFRJ), Brazil; 3: Sargent Centre for Process Systems Engineering, Imperial College London A two-level model to assess the economic feasibility of renewable urea production from agricultural wastes Universidade de São Paulo, Brazil Computer-based Chemical Engineering Education for Green and Digital Transformation Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova ulica 17, SI-2000 Maribor, Slovenia Development of a Hybrid Model for the Paracetamol Batch Dissolution in Ethanol Using Universal Differential Equations 1: School of Chemistry, EPQB, Universidade Federal do Rio de Janeiro, Av. Horácio Macedo, 2030, CT, Bloco E, 21941-914, Rio de Janeiro, RJ – Brazil; 2: Chemical Engineering Department, Norwegian University of Science and Technology, Trondheim, 793101, Norway; 3: Instituto de Química, Rio de Janeiro State University (UERJ), Rua São Francisco Xavier, 524, Maracanã, Rio de Janeiro, RJ, 20550-900, Brazil; 4: PEQ/COPPE – Universidade Federal do Rio de Janeiro, Av. Horácio Macedo, 2030, CT, Bloco G, G115, 21941-914, Rio de Janeiro, RJ – Brazil Novel PSE applications and knowledge transfer in joint industry - university energy-related postgraduate education 1: Optimisation of Production Systems Lab., University of West Attica; 2: Hellenic Energy S.A,; 3: Soft Energy Applications and Environmental Protection Lab., University of West Attica Optimal Operation of Middle Vessel Batch Distillation using an Economic MPC IIT Bombay, India Recurrent deep learning models for multi-step ahead prediction: comparison and evaluation for real Electrical Submersible Pump (ESP) system. 1: Norwegian University of Science and Technology, Norway; 2: Federal University of Bahia, Brazil; 3: CENPES, Petrobras R&D Center, Brazil Simulation and optimisation of vacuum (pressure) swing adsorption with simultaneous consideration of real vacuum pump data and bed fluidisation Centre for Process Integration, Department of Chemical Engineering, School of Engineering, The University of Manchester, United Kingdom Sociotechnical Transition: An Exploratory Study on the Social Appropriability of Users of Smart Meters in Wallonia. Université de Mons, Belgium Optimizing Methane Conversion in a Flow Reactor System Using Bayesian Optimization and Fisher Information Matrix Driven Experimental Design Approaches: A Comparative Study University College London, United Kingdom OPTIMAL CONTROL OF PSA UNITS BASED ON EXTREMUM SEEKING 1: Laboratory of Separation and Reaction Engineering−Laboratory of Catalysis and Materials (LSRE LCM), Department of Chemical Engineering, University of Porto, Porto, 4200-465, Portugal; 2: ALiCE−Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Porto, 4200-465, Portugal; 3: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 4, Kjemiblokk 5, Trondheim, 793101, Norway Enhancing Higher Education Capacity for Sustainable Data Driven Food Systems in Indonesia – FIND4S 1: BioTeC+, Chemical & Biochemical Process Technology & Control, KU Leuven, Belgium; 2: Department of Food Technology, Diponegoro University, Indonesia Optimization of Specific Heat Transfer Area for Multiple Effects Desalination (MED) Process 1: Sirte University, Libya; 2: Sirte Oil Company, National Oil Corporation, Libya; 3: University of Bradford, United Kingdom Companies’ operation and trading strategies under the triple trading of electricity, carbon quota and commodities: A game theory optimization modelling 1: State Key Lab of Power System Operation and Control, Department of Energy and Power Engineering, Tsinghua-BP Clean Energy Centre, Tsinghua University, Beijing, 100084, China; 2: Department of Chemical Engineering, Imperial College London, SW7 2AZ, United Kingdom Solvent and emission source dependent amine-based CO2 capture costs estimation methodology for systemic level analysis 1: Ecole Polytechnique Fédérale de Lausanne, Switzerland; 2: TotalEnergies OneTech, France Energy Planning Toward Absolute Environmental Sustainability: Key Decisions and Actionable Insights Through Interpretable Machine Learning 1: Université catholique de Louvain, Belgium; 2: Vrije Universiteit Brussel, Belgium |
|||||||
| 4:30pm - 5:30pm |
Plenary 2: Prof. Denis Wirtz, John Hopkins University, USA Location: Zone 1 - Aula Louisiane Chair: Jan Van Impe Co-chair: Filip Logist |
||||||||
| 6:15pm - 7:00pm |
Boat tour to Oude Vismijn |
||||||||
| 7:00pm - 10:00pm |
Conference Dinner at Oude Vismijn Location: Oude Vismijn |
||||||||
|
| |||||||
| 8:00am - 8:30am |
Registration & welcome coffee Location: Entrance Hall - Cafetaria |
||||||
| 8:30am - 9:30am |
Plenary 3: Prof. Maria Papathanasiou, Imperial College London, UK Location: Zone 1 - Aula Louisiane Chair: Léonard Grégoire Co-chair: Satyajeet Bhonsale |
||||||
| 9:30am - 10:00am |
Essenscia – Keynote on Functional Safety Location: Zone 1 - Aula Louisiane |
||||||
| 10:00am - 10:30am |
Coffee Break Location: Zone 2 - Cafetaria |
Poster Session 3 Location: Zone 2 - Cafetaria pyDEXPI: A Python framework for piping and instrumentation diagrams using the DEXPI information model Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands A Bayesian optimization approach for data-driven Petlyuk distillation columns design. 1: Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Departamento de Ingeniería Química Celaya, Guanajuato, México, 38010; 2: Escuela de Ingeniería y Ciencias, Tecnológico de Monterrey, Campus Monterrey Ave. Eugenio Garza Sada 2501, Monterrey, N.L, 64849, México; 3: Department of Energy Systems and Environment, IMT Atlantique, GEPEA rue Alfred Kastler, Nantes, 44000, France; 4: Departamento de Energía, Universidad Autónoma Metropolitana-Azcapotzalco Av. San Pablo 180, C.P. 02200, Ciudad de México, México; 5: Departamento de Procesos y Tecnología, Universidad Autónoma Metropolitana-Cuajimalpa Av. Vasco de Quiroga 4871, C.P. 05348, Ciudad de México, México Enhancing Energy Efficiency of Industrial Brackish Water Reverse Osmosis Desalination Process using Waste Heat 1: Middle Technical University, Iraq; 2: Mu’tah University, Jordan; 3: University of Bradford, United Kingdom Analysis of Control Properties as a Sustainability Indicator in Intensified Processes for Levulinic Acid Purification Universidad de Guanajuato, México Reactive Crystallization Modeling for Process Integration Simulation Purdue University, United States of America A Machine Learning approach for subvisible particles classification in biotherapeutic formulations Sanofi, France EVALUATION OF THE CONTROLLABILITY OF DISTILLATION WITH MULTIPLE REACTIVE STAGES 1: Universidad de Guanajuato, Mexico; 2: Pontificia Universidad Católica del Perú, Peru; 3: Instituto Tecnológico Superior de Guanajuato, Mexico Optimization of steam power systems in industrial parks considering distributed heat supply and auxiliary steam turbines China University of Petroleum (Beijing), China, People's Republic of Conceptual Modular Design and Optimization for Continuous Pharmaceutical Processes Technical University of Denmark, Denmark Design of a policy framework in support of the Transformation of the Dutch Industry QuoMare Data-Driven Deep Reinforcement Learning for Greenhouse Temperature Control College of Science and Engineering, Hamad bin Khalifa University, Qatar Balancing modelling complexity and experimental effort for conducting QbD on lipid nanoparticles (LNPs) systems University of Coimbra, CERES, Department of Chemical Engineering Decarbonizing Quebec’s Chemical Sector: Bridging sector disparities with simplified modeling Laboratoire des technologies de l’énergie, Institut de Recherche d’Hydro-Québec, Canada Optimizing Green Hydrogen Supply Chains in Portugal: Balancing Economic Efficiency and Water Sustainability 1: CEG-IST, IST UL, Portugal; 2: NOVA Math, NOVA FCT, Portugal; 3: Mathematics Department, NOVA FCT, Portugal Towards net zero carbon emissions and optimal water management within an integrated aquatic and agricultural livestock system 1: Universidad Nacional del Sur, Argentine Republic; 2: Planta Piloto de Ingeneria Quimica (PLAPIQUI) A Modelling and Simulation Software for Polymerization with Microscopic Resolution 1: State Key Laboratory of Industrial Control Technology, College of Control Science and Engineering, Zhejiang University 310027, Hangzhou China; 2: Huzhou Institute of Industrial Control Technology 313000, Huzhou China Regularization and Uncertainty Quantification for Parameter Estimation of NRTL Models 1: Technische Universität Berlin, Process Dynamics and Operations, Straße des 17. Juni 135, 10623 Berlin, Germany; 2: Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12205 Berlin, Germany From Sugar to Bioethanol – Simulation, Optimization, and Process Technology in One Module 1: Berliner Hochschule für Technik; 2: Chemstations Aotearoa-New Zealand’s Energy Future: A Model for Industrial Electrification through Renewable Integration 1: Ahuora – Centre for Smart Energy Systems, School of Engineering, The University of Waikato; 2: Szechenyi István University, Gyor, Egyetem tér 1, Hungary Non-Linear Model Predictive Control for Oil Production in Wells Using Electric Submersible Pumps 1: Department of Chemical Engineering, Norwegian University of Science and Technology, Norway; 2: Department of Chemical Engineering, Federal University of Bahia, Polytechnic School, Bahia, Brazil; 3: Department of Electrical and Computer Engineering, Federal University of Bahia, Polytechnic School, Bahia, Brazil.; 4: CENPES, Petrobras R&D Center, Brazil, Av. Horcio Macedo 950, Cid. Universitria, Ilha do Fundo, Rio de Janeiro, Brazil. Life Cycle Assessment of Green Hydrogen Electrofuels in India's Transportation Sector IIT Roorkee, India Probabilistic Design Space Identification for Upstream Bioprocesses under Limited Data Availability Imperial College London, United Kingdom Study of the Base Case in a Comparative Analysis of Recycling Loops for Sustainable Aviation Fuel Synthesis from CO2 University of Liège, Belgium Electricity Bidding with Variable Loads 1: Hitachi Energy Germany AG; 2: Aalto University, Finland Sodium bicarbonate production from CO2 captured in waste-to-energy plants: an Italian case-study 1: Politecnico di Milano, Italy; 2: Acinque Ambiente Srl, Italy; 3: a2a S.p.A., Italy A Decomposition Approach for Operable Space Maximization 1: Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, London SW7 2AZ, United Kingdom; 2: Siemens Industry Software, London W6 7HA, United Kingdom Non-invasive Tracking of PPE Usage in Research Lab Settings using Computer Vision-based Approaches: Challenges and Solutions Indian Institute of Technology, Madras, India Integrating batch operations involving liquid-solid mixtures into continuous process flows Universidad de la República, Facultad de Ingeniería, Uruguay Enhancing decision-making by prospective Life Cycle Assessment linked to Integrated Assessment Models: the roadmap of formic acid production University of Cantabria, Spain Towards Self-Tuning PID Controllers: A Data-Driven, Reinforcement Learning Approach for Industrial Automation LSU, United States of America Energy integration of an intensified biorefinery scheme from waste cooking oil to produce sustainable aviation fuel 1: Faculty of Engineering, Monash University, Australia; 2: Facultad de Ingeniería, Universidad Autónoma de Querétaro, Mexico Integrating Renewable Energy and CO₂ Utilization for Sustainable Chemical Production: A Superstructure Optimization Approach Tsinghua University, China, People's Republic of Sustainable production of L-lactic acid from lignocellulosic biomass using a recyclable buffer: Process development and techno-economic evaluation School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea Potential of chemical looping for green hydrogen production from biogas: process design and techno-economic analysis School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea Data-Driven Soft Sensors for Process Industries: Case Study on a Delayed Coker Unit 1: Beijing University of Chemical technology, China, People's Republic of; 2: Ingenero Inc. 4615 Southwest Freeway, Suite 320, Houston TX 77027, USA Retrofitting AP-X LNG Process Through Mixed Refrigerant Composition variation: A Sensitivity Analysis Towards Decarbonization Objective Chemical Engineering department, Qatar University, Qatar Performance Evaluation of Gas Turbine Combined Cycle Plants with Hydrogen Co-Firing Under Various Operating Conditions 1: Korea Institute of Industrial Technology, Korea, Republic of (South Korea); 2: School of Mechanical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea Modelling of Woody Biomass Gasification for process optimization The University of Tokyo, Japan Comparative analysis of conventional and novel low-temperature and hybrid technologies for carbon dioxide removal from natural gas Politecnico di Milano, Italy Development of Chemical Recycling System for NOx Gas from NH3 Combustion Organization for Programs on Environmental Sciences, Graduate School of Arts and Sciences, The University of Tokyo, Japan Hybrid Model: Oxygen balance for the development of a digital twin 1: Technical University Denmark, Denmark; 2: Novonesis, Fermentation Pilot Plant An integrated approach for the sustainable water resources optimisation 1: Optimisation of Production Systems Lab, Mechanical Engineering Department, University of West Attica; 2: Soft Energy Applications and Environmental Protection Lab., University of West Attica Streamlined Life-Cycle Assessments of Chemicals Based on Chemical Taxonomies Institute for Chemical and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zurich, Vladimir-Prelog-Weg 1, 8093 Zurich, Switzerland Aspen Plus Teaching: Spread or Compact Approach 1: LEPABE, Laboratory for Process Engineering, Environment, Biotechnology and Energy, Chemical Engineering Department, Faculty of Engineering, University of Porto, Porto, Portugal; 2: ALiCE, Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Porto, Portugal; 3: CERENA , Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Portugal Integration of Life Cycle Assessment into the Optimal Design of Hydrogen Infrastructure for Regional-Scale Deployment 1: Laboratoire de Génie Chimique, Université Toulouse, CNRS, INPT, Toulouse, France; 2: LAboratoire PLAsma et Conversion d'Énergie, INPT, Toulouse, France; 3: European Institute for Energy Research, Emmy-Noether Straße 11, Karlsruhe, Germany Streamlining Catalyst Development through Machine Learning: Insights from Heterogeneous Catalysis and Photocatalysis Brandenburg University of Technology Cottbus-Senftenberg, Germany Life Cycle Design of a Novel Energy Crop “Sweet Erianthus” by Backcasting from Process Simulation Integrating Agriculture and Industry 1: Research Center for Advanced Science and Technology, LCA Center for Future Strategy, The University of Tokyo; 2: Tropical Agriculture Research Front, Japan International Research Center for Agricultural Sciences; 3: Presidential Endowed Chair for “Platinum Society”, The University of Tokyo; 4: Research Center for Solar Energy Chemistry, Graduate School of Engineering Science, Osaka University; 5: Institute for Future Initiatives, The University of Tokyo Reversible Solid Oxide Cells and Long-term Energy Storage in Residential Areas EPFL, Switzerland A Comparative Analysis of Industrial Edge MLOps prototype for ML Application Deployment at the edge of Process Industry Technische Universität Dresden, Germany Energy Water Nexus Resilience Analysis Using Integrated Resource Allocation Approach 1: Texas A & M, United States of America; 2: Hamad Bin Khalifa University , Qatar Technoeconomic Analysis of a Novel Amine-Free Direct Air Capture System Integrated with HVAC 1: Hamad Bin Khalifa University College of Science and Engineering, Qatar; 2: Qatar Environment and Energy Institute (QEERI), Doha, Qatar.; 3: Corresponding author’s email: aamhamed@hbku.edu.qa Computer-Aided Molecular Design for Citrus and Coffee Wastes Valorisation 1: University of São Paulo, Brazil; 2: Laboratoire de Génie Chimique, France Introduction of carbon capture technologies in industrial symbioses for decarbonization Laboratoire de Genie Chimique, Toulouse INP, CNRS, Université Paul Sabatier, France Temporal Decomposition Scheme for Designing Large-Scale CO2 Supply Chains Using a Neural-Network Based Model for Forecasting CO2 Emissions University of Alicante, Spain Dynamic simulation of turquoise hydrogen production using a regenerative non-catalytic pyrolysis reactor under various heat sources 1: Korea Institute of Industrial Technology, Korea, Republic of (South Korea); 2: Yonsei university, Korea, Republic of (South Korea) Empowering Engineering with Machine Learning: Hybrid Application to Reactor Modeling 1: IFP Energies nouvelles, France; 2: Université de Lorraine, CNRS, LRGP, France Cascade heat pumps as an enabler for solvent-based post-combustion capture in a cement plant 1: Department of Energy and Process Engineering, NTNU; 2: SINTEF Energy Research Agent-Based Simulation of Integrated Process and Energy Supply Chains: A Case Study on Biofuel Production School of Chemical, Materials and Biological Engineering, University of Sheffield, United Kingdom Steel Plant Electrification: A Pathway to Sustainable Production and Carbon Reduction 1: Qatar University, Qatar; 2: Notre Dame University; 3: University of Belgrade INCEPT: Interpretable Counterfactual Explanations for Processes using Timeseries comparisons 1: Department of Chemical Technology, Indian Institute of Technology Madras, Chennai 600036, India; 2: Department of Applied Mechanics, Indian Institute of Technology Madras, Chennai 600036, India; 3: American Express Lab for Data Analytics and Risk Technology, Indian Institute of Technology Madras, Chennai 600036, India Dynamic Simulation of an Oxy-Fuel Cement Pyro-processing Section 1: Process Systems Engineering (AVT.SVT), RWTH Aachen University, 52074 Aachen, Germany; 2: thyssenkrupp Polysius GmbH, 59269 Beckum, Germany; 3: JARA-ENERGY, 52056 Aachen, Germany; 4: Institute of Climate and Energy Systems, Energy Systems Engineering (ICE-1), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany Multi-Objective Optimization for Sustainable Design of Power-to-Ammonia Plants Politecnico di Milano, Italy Simulating Long-term Carbon Balance on Forestry Management and Woody Biomass Applications in Japan 1: Department of Chemical System Engineering, The University of Tokyo; 2: Presidential Endowed Chair for “Platinum Society”, The University of Tokyo; 3: Institute for Future Initiatives, The University of Tokyo Discovering patterns in Food Safety Culture by k-means clustering 1: BioTeC+ KU Leuven; 2: University of West Attica, Greece Development and Integration of a Co-Current Hollow Fiber Membrane Unit for Gas Separation in Process Simulators Using CAPE-OPEN Standards Politecnico di Milano, Italy A Comparative Study of Aspen Plus and Machine Learning Models for Syngas Prediction in Biomass-Plastic Waste Co-Gasification Departamento de Ingeniería Química Industrial Y del Medioambiente, Escuela Superior de Ingenieros Industriales, Universidad Politécnica de Madrid A Fault Detection Method Based on Key Variable Forecasting Department of Chemical Engineering, Tsinghua University, Beijing 100084, China Rate-Based Modeling Approach of a Rotating Packed Bed for CO2 Chemisorption in aqueous MEA Solutions Process Dynamics and Operations Group - Technical University of Berlin, Germany Machine Learning applications in dairy production 1: BioTeC+ KU Leuven; 2: University of West Attica, Greece Dynamic Modelling of CO2 Capture with Hydrated Lime: Integrating Porosity Evolution, Evaporation, and Temperature Variations University of Liège, Belgium Integrated LCA and Eco-design Process for Hydrogen Technologies: Case Study of the Solid Oxide Electrolyser. 1: CIRAIG, Polytechnique Montréal, Montréal, Canada; 2: HES-SO Valais-Wallis, Sion, Switzerland Decision Support Tool for Technology Selection in Industrial Heat Generation: Balancing Cost and Emissions Texas A&M University at Qatar, Qatar Assessing Distillation Processes through Sustainability Indicators Aligned with the Sustainable Development Goals Budapest University of Technology and Economics, Hungary Strategies for a more Resilient Green Haber-Bosch Process 1: Centro de Química Estrutural, Institute of Molecular Sciences, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001, Portugal; 2: Centro de Recursos Naturais e Ambiente, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001, Portugal Process simulation and thermodynamic analysis of newly synthesized pre-combustion CO2 capture system using novel Ionic liquids for H2 production Qatar University, Qatar Mechanistic and Data-Driven Models for Predicting Biogas Production in Anaerobic Digestion Processes 1: University of Surrey, United Kingdom; 2: University of Manchester, United Kingdom Application and comparison of optimization methods for an Energy Mix optimization problem 1: UniLaSalle, UPJV, B2R GeNumEr, U2R 7511, 60000 Beauvais, France; 2: UniLaSalle, UPJV, B2R GeNumEr, U2R 7511, 80000 Amiens, France; 3: Syndicat mixte de l'aéroport de Beauvais-Tillé (SMABT), 1 rue du Pont de Paris - 60000 Beauvais Insights into the Development and Implementation of Soft Sensors in Industrial Settings 1: Department Chemical Engineering, Indian Institute of Technology Madras, Chennai, 600036, India; 2: American Express Lab for Data Analytics, Risk & Technology, Indian Institute of Technology Madras, Chennai, 600036, India Synthesis of Distillation Flowsheets with Reinforcement Learning using Transformer Blocks Faculty of Science and Technology, University of Twente, the Netherlands Machine Learning Surrogate Models for Atmospheric Dispersion: A Time-Efficient Approach to Air Quality Prediction 1: Polytechnic University of Catalonia, Spain; 2: Abdelmalek Essaadi University, Morocco Comparative Analysis of PharmHGT, GCN, and GAT Models for Predicting LogCMC in Surfactants LSU, United States of America Short-cut Correlations for CO2 Capture Technologies in Small Scale Applications University of Liege, Belgium Mixed-Integer Bilevel Optimization Problem Generator and Library for Algorithm Evaluation and Development University of Wisconsin-Madison, United States of America Surface Tension Data Analysis for Advancing Chemical Engineering Applications 1: Center for Industrial Process Technology, Department of Chemical Engineering, KU Leuven, Agoralaan Building B, 3590 Diepenbeek, Belgium; 2: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 6, Kjemiblokk 4, Trondheim 7043, Norway Design considerations for hardware based acceleration of molecular dynamics University of Sheffield, United Kingdom A Novel AI-Driven Approach for Adsorption Parameter Estimation in Gas-Phase Fixed-Bed Experiments 1: Laboratory of Separation and Reaction Engineering−Laboratory of Catalysis and Materials (LSRE LCM), Department of Chemical Engineering, University of Porto, Porto, 4200-465, Portugal; 2: ALiCE−Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Porto, 4200-465, Portugal; 3: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 4, Kjemiblokk 5, Trondheim, 793101, Norway Integration of Graph Theory and Machine Learning for enhanced process synthesis and design of wastewater treatment networks 1: Department of Chemical Engineering, Rowan University, Glassboro, New Jersey, USA; 2: Sustainability Competence Center, Széchenyi István University, Győr, Hungary; 3: Department of Physics, Indian Institute of Technology, Kharagpur, India An Automated CO2 Capture Pilot Plant at ULiège: A Platform for the Validation of Process Models and Advanced Control University of Liège, Belgium A COMPARISON OF ROBUST MODELING APPROACHES TO COPE WITH UNCERTAINTY IN INDEPENDENT TERMS, CONSIDERING THE FOREST SUPPLY CHAIN CASE STUDY 1: Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada (UNC-CONICET), Universidad Nacional de Córdoba. Facultad de Ciencias Exactas, Físicas y Naturales. Av. Vélez Sarsfield 1611, X5016GCA Ciudad Universitaria, Córdoba, Argentina; 2: Department of Chemical Engineering, Carnegie Mellon University, 5000 Forbes Ave, Pittsburgh PA 15213 |
|||||
| 10:30am - 11:30am |
T7: CAPEing with Societal Challenges - Session 5 Location: Zone 3 - Room D049 Optimal Hydrogen Flux in a Catalytic Membrane Water-Gas Shift Converter 1: King Fahd University of Petroleum & Minerals, Saudi Arabia; 2: KULeuven, Belgium 10:50am - 11:10am On Optimisation of Operating Conditions for Maximum Hydrogen Storage in Metal Hydrides University of the Witwatersrand, South Africa 11:10am - 11:30am Methanol and Ammonia as Green Fuels and Hydrogen Carriers: A Comparative Analysis for Fuel Cell Power Generation Department of Chemical Engineering, University of Salamanca, Spain, 37008, Spain |
||||||
| 10:30am - 12:30pm |
T1: Modelling and Simulation - Session 8 Location: Zone 3 - Room E032 Chair: Ihab Hashem Co-chair: Jakob Kjøbsted Huusom Development of a virtual CFD model for regulating temperature in a liquid tank 1: Organization for Programs on Environmental Sciences, Graduate School of Arts and Sciences, The University of Tokyo, 3-8-1 Komaba, Meguro-ku, Tokyo 153-8902, Japan; 2: TechnoPro, Inc. TechnoPro R&D Company, Roppongi Hills Mori Tower 35F, 6-10-1 Roppongi, Minato-ku, Tokyo 106-6135, Japan; 3: Technology and Innovation Center, Daikin Industries, LTD., 1-1 Nishi-Hitotsuya, Settsu, Osaka 566-8585, Japan 10:50am - 11:10am A Computational Framework for Cyclic Steady-State Simulation of Dynamic Catalysis Systems: Application to Ammonia Synthesis Carnegie Mellon University, United States of America 11:10am - 11:30am Accelerated Process Modeling for Light-Mediated Controlled Radical Polymerization 1: State Key Laboratory of Industrial Control Technology, College of Control Science and Engineering, Zhejiang University 310027, Hangzhou China; 2: National Center for International Research on Quality-targeted Process Optimization and Control, Zhejiang University 310027, Hangzhou China; 3: Chemical Engineering Department, University of Patras, Patras 26504, Greece; 4: Chemical Engineering & Mechanical Engineering Departments, Pennsylvania State University, College Park, PA 16802 USA 11:30am - 11:50am Plantwide control of a formic acid production plant under unsteady green hydrogen supply Technische Universiteit Delft, Netherlands, The 11:50am - 12:10pm Exploiting Operator Training Systems in chemical plants: learnings from industrial practice at BASF. BASF Antwerpen NV, Belgium 12:10pm - 12:30pm New Directions and Software Tools Within the Process Systems Engineering-Plus Ecosystem 1: Ahuora – Centre for Smart Energy Systems, Department of Software Engineering, University of Waikato, Hamilton 3240, New Zealand; 2: Ahuora – Centre for Smart Energy Systems, School of Engineering, University of Waikato, Hamilton 3240, New Zealand; 3: Department of Chemical and Materials Engineering, University of Auckland, 5 Grafton Road, Auckland, 1010, New Zealand; 4: National Energy Technology Laboratory, Pittsburgh, PA 15236, United States of America; 5: NETL Support Contractor, Pittsburgh, PA 15236, United States of America; 6: Lawrence Berkeley National Laboratory, Berkeley, CA 94720, United States of America; 7: Center for Computing Research, Sandia National Laboratories, Albuquerque, NM, 87185, United States of America |
T2: Sustainable Product Development and Process Design - Session 7 - Including keynote Location: Zone 3 - Room D016 Co-chair: Zdravko Kravanja Keynote by Angelique Leonard Uliege 11:10am - 11:30am Hybrid Modeling for Prospective Process Design Aligned with the Sustainable Development Goals 1: Institute for Chemical and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zurich, Vladimir-Prelog-Weg 1, 8093 Zurich, Switzerland; 2: IQS School of Engineering, Universitat Ramon Llull, Via Augusta 390, 08017 Barcelona, Spain. 11:30am - 11:50am Applying learning effects for sustainable-by-design clinker production and Power-to-X conversion The Technical University of Denmark, Denmark 11:50am - 12:10pm Environmental Impacts of Trichlorosilane: Process Optimization, Life Cycle Assessment, and the Importance of Processing History 1: Department of Engineering, King's College London, WC2R 2LS, United Kingdom; 2: Imperial College London, Department of Chemical Engineering, SW7 2AZ, United Kingdom 12:10pm - 12:30pm Olefins production through sustainable pathways: techno-economic and environmental assessment Industrial Process and Energy Systems Engineering, EPFL, Sion, 1950, Switzerland |
T3: Large Scale Design and Planning/ Scheduling - Session 6 Location: Zone 3 - Aula E036 Chair: Meik Franke Co-chair: Iiro Harjunkoski Process Integration and Waste Valorization for Sustainable Biodiesel Production Towards a Transportation Sector Energy Transition Ecole Polytechnique Fédérale de Lausanne, Switzerland 10:50am - 11:10am Optimization-based planning of carbon-neutral strategy: Economic priority between CCU vs CCS School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea 11:10am - 11:30am Integration of MILP and Discrete-Event Simulation for Flow Shop Scheduling Using Benders Cuts 1: Bayer AG, Kaiser-Wilhelm Allee 1, 51368 Leverkusen, Germany; 2: Faculty of Science and Technology, University of Twente, the Netherlands 11:30am - 11:50am Evolutionary Algorithm Based Real-time Scheduling via Simulation-Optimization for Multiproduct Batch Plants 1: INOSIM Software GmbH, Germany; 2: Technische Universität Dortmund; 3: ZEDO-Zentrum für Beratungssysteme in der Technik Dortmund e.V. 11:50am - 12:10pm Pipeline Network Growth Optimisation for CCUS: A Case Study on the North Sea Port Cluster University of Sheffield, United Kingdom 12:10pm - 12:30pm Pareto optimal solutions for decarbonization of oil refineries under different electricity grid decarbonization Scenarios 1: Carnegie Mellon University, United States of America; 2: Shell USA |
T4: Model Based optimisation and advanced Control - Session 6 Location: Zone 3 - Room E031 Chair: Mumin Enis Leblebici Co-chair: Jose Alberto Romagnoli Subset Selection Strategy for Gaussian Process Q-Learning of Process Optimization and Control 1: Sargent Centre for Process Systems Engineering, Imperial College London, United Kingdom; 2: Department of Computing, Imperial College London, United Kingdom 10:50am - 11:10am Machine Learning-Based Soft Sensor for Hydrogen Sulfide Monitoring in the Amine Gas Treatment at an Industrial Oil Regeneration Plant 1: CMIC Department "Giulio Natta", Politecnico di Milano, Piazza Leonardo da Vinci 32, Milano, 20133, Italy; 2: Departamento de Engenharia Química, Instituto Superior Técnico, Avenida Rovisco Pais 1, Lisboa, 1049-001, Portugal; 3: Itelyum Regeneration S.p.A., Via Tavernelle, 19, Pieve Fissiraga, 26854, Italy 11:10am - 11:30am Machine Learning-Aided Robust Optimisation for Identifying Optimal Operational Spaces under Uncertainty 1: The University of Manchester, United Kingdom; 2: Unilever R&D Port Sunlight, United Kingdom 11:30am - 11:50am Deterministic Optimization of Shell and Tube Heat Exchangers with Twisted Tape Turbulence Promoters 1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de San Luis Potosí, México 11:50am - 12:10pm Systematic design of structured packings based on shape optimization Hamburg University of Technology, Institute of Process Systems Engineering, Germany |
T5: Concepts, Methods and Tools - Session 6 Location: Zone 3 - Aula D002 Chair: Lydia Katsini Co-chair: Federico Galvanin An Objective Reduction Algorithm for Nonlinear Many-Objective Optimization Problems University of Michigan, United States of America 10:50am - 11:10am Knowledge Discovery in Large-Scale Batch Processes through Explainable Boosted Models and Uncertainty Quantification: Application to Rubber Mixing 1: Centre de Mathématiques Appliquées (CMAP), Ecole Polytechnique, France; 2: Manufacture Française des Pneumatiques Michelin, France 11:10am - 11:30am Nonmyopic Bayesian process optimization with a finite budget 1: Instituto de Automática e Informática Industrial (ai2), Universitat Politecnica de Valencia, Spain; 2: Instituto de Diseño y Fabricación (IDF), Universitat Politecnica de Valencia, Spain 11:30am - 11:50am A Propagated Uncertainty Active Learning Method for Bayesian Classification Problems University College London, United Kingdom 11:50am - 12:10pm Modeling climate change impact on dairy: an uncertainty analysis 1: BioTeC+, Chemical & Biochemical Process Technology & Control, KU Leuven, Belgium; 2: Department of Food Sciences and Nutrition, University of Malta, Malta; 3: National and Kapodistrian University of Athens, Department of Chemistry, Athens, Greece |
T6: Digitalization and AI - Session 5 Location: Zone 3 - Room E033 Chair: Alexander W Dowling Co-chair: Fernando G. Martins The Smart HPLC Robot: Fully autonomous method development empowered by mechanistic model framework University College London, United Kingdom 10:50am - 11:10am Hybrid Models Automatic Identification and Training through Evolutionary Algorithms Center for Industrial Process Technology, Department of Chemical Engineering, KU Leuven, Agoralaan Building B, 3590 Diepenbeek, Belgium 11:10am - 11:30am Hybrid machine-learning for dynamic plant-wide biomanufacturing 1: Department of Chemical and Biochemical Engineering, Technical University of Denmark, DK-2800 Kgs Lyngby, Denmark; 2: Department of Chemical Engineering, Columbia University, New York, NY 10027, United States of America 11:30am - 11:50am Physics-Informed Automated Discovery of Kinetic Models 1: Department of Chemical Engineering, Imperial College London, South Kensington, London, SW7 2AZ, United Kingdom; 2: Department of Chemistry, Imperial College London, White City, London, W12 0BZ, United Kingdom.; 3: Department of Chemical Engineering, The University of Manchester, Oxford Road, Manchester, M13 9P, United Kingdom |
T9: PSE4Food and Biochemical - Session 5 - Including keynote Location: Zone 3 - Room E030 Chair: Efstathia Tsakali Co-chair: Satyajeet Bhonsale Keynote: Real-time dynamic optimisation for sustainable biogas production through anaerobic co-digestion with hybrid models 1: University of Surrey, United Kingdom; 2: University of Manchester, United Kingdom 11:10am - 11:30am Optimization-based operational space design for effective bioprocess performance under uncertainty Department of Chemical Engineering, University of Manchester, Manchester, M13 9PL, UK 11:30am - 11:50am A MILP model to identify optimal strategies to convert soybean straw into value-added products 1: University of São Paulo, Brazil; 2: OP2B - Optimization to Business Ltda, Brazil; 3: National Renewable Energy Laboratory, USA 11:50am - 12:10pm Fed-batch bioprocess prediction and dynamic optimization from hybrid modelling and transfer learning 1: University of Manchester, United Kingdom; 2: Fuzhou University, China; 3: Xiamen University, China 12:10pm - 12:30pm Individual-based modelling (IbM) reveals emergent stability in microbial competitive interactions KU Leuven, Belgium |
| 11:00am - 12:00pm |
Brewery visit Location: On-campus brewery |
||||||
| 11:30am - 12:30pm |
T10: PSE4BioMedical and (Bio)Pharma - Session 3 Location: Zone 3 - Room D049 Co-chair: Noor Al-Rifai Combining monoculture models of B. subtilis and E. coli in the presence of ampicillin enables prediction of unexpected coculture behaviour 1: BioTeC+, Chemical and Biochemical Process Technology and Control, KU Leuven Campus Gent, Gent, Belgium; 2: Microbiology Theme, MBMFS, Swammerdam Institute for Life Sciences, UvA, Amsterdam, The Netherlands 11:50am - 12:10pm A hybrid model for determining design spaces in freezing processes of human induced pluripotent stem cell-derived spheroids 1: Department of Chemical System Engineering, The University of Tokyo, Tokyo, Japan; 2: Technology Research & Development Division, Sumitomo Pharma Co., Ltd., Osaka, Japa |
||||||
| 12:30pm - 2:30pm |
Lunch Location: Zone 2 - Cafetaria |
||||||
| 1:30pm - 2:30pm |
MDPI Meeting Location: L226 |
Poster Session 3 Location: Zone 2 - Cafetaria pyDEXPI: A Python framework for piping and instrumentation diagrams using the DEXPI information model Process Intelligence Research Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, Delft 2629 HZ, The Netherlands A Bayesian optimization approach for data-driven Petlyuk distillation columns design. 1: Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Departamento de Ingeniería Química Celaya, Guanajuato, México, 38010; 2: Escuela de Ingeniería y Ciencias, Tecnológico de Monterrey, Campus Monterrey Ave. Eugenio Garza Sada 2501, Monterrey, N.L, 64849, México; 3: Department of Energy Systems and Environment, IMT Atlantique, GEPEA rue Alfred Kastler, Nantes, 44000, France; 4: Departamento de Energía, Universidad Autónoma Metropolitana-Azcapotzalco Av. San Pablo 180, C.P. 02200, Ciudad de México, México; 5: Departamento de Procesos y Tecnología, Universidad Autónoma Metropolitana-Cuajimalpa Av. Vasco de Quiroga 4871, C.P. 05348, Ciudad de México, México Enhancing Energy Efficiency of Industrial Brackish Water Reverse Osmosis Desalination Process using Waste Heat 1: Middle Technical University, Iraq; 2: Mu’tah University, Jordan; 3: University of Bradford, United Kingdom Analysis of Control Properties as a Sustainability Indicator in Intensified Processes for Levulinic Acid Purification Universidad de Guanajuato, México Reactive Crystallization Modeling for Process Integration Simulation Purdue University, United States of America A Machine Learning approach for subvisible particles classification in biotherapeutic formulations Sanofi, France EVALUATION OF THE CONTROLLABILITY OF DISTILLATION WITH MULTIPLE REACTIVE STAGES 1: Universidad de Guanajuato, Mexico; 2: Pontificia Universidad Católica del Perú, Peru; 3: Instituto Tecnológico Superior de Guanajuato, Mexico Optimization of steam power systems in industrial parks considering distributed heat supply and auxiliary steam turbines China University of Petroleum (Beijing), China, People's Republic of Conceptual Modular Design and Optimization for Continuous Pharmaceutical Processes Technical University of Denmark, Denmark Design of a policy framework in support of the Transformation of the Dutch Industry QuoMare Data-Driven Deep Reinforcement Learning for Greenhouse Temperature Control College of Science and Engineering, Hamad bin Khalifa University, Qatar Balancing modelling complexity and experimental effort for conducting QbD on lipid nanoparticles (LNPs) systems University of Coimbra, CERES, Department of Chemical Engineering Decarbonizing Quebec’s Chemical Sector: Bridging sector disparities with simplified modeling Laboratoire des technologies de l’énergie, Institut de Recherche d’Hydro-Québec, Canada Optimizing Green Hydrogen Supply Chains in Portugal: Balancing Economic Efficiency and Water Sustainability 1: CEG-IST, IST UL, Portugal; 2: NOVA Math, NOVA FCT, Portugal; 3: Mathematics Department, NOVA FCT, Portugal Towards net zero carbon emissions and optimal water management within an integrated aquatic and agricultural livestock system 1: Universidad Nacional del Sur, Argentine Republic; 2: Planta Piloto de Ingeneria Quimica (PLAPIQUI) A Modelling and Simulation Software for Polymerization with Microscopic Resolution 1: State Key Laboratory of Industrial Control Technology, College of Control Science and Engineering, Zhejiang University 310027, Hangzhou China; 2: Huzhou Institute of Industrial Control Technology 313000, Huzhou China Regularization and Uncertainty Quantification for Parameter Estimation of NRTL Models 1: Technische Universität Berlin, Process Dynamics and Operations, Straße des 17. Juni 135, 10623 Berlin, Germany; 2: Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12205 Berlin, Germany From Sugar to Bioethanol – Simulation, Optimization, and Process Technology in One Module 1: Berliner Hochschule für Technik; 2: Chemstations Aotearoa-New Zealand’s Energy Future: A Model for Industrial Electrification through Renewable Integration 1: Ahuora – Centre for Smart Energy Systems, School of Engineering, The University of Waikato; 2: Szechenyi István University, Gyor, Egyetem tér 1, Hungary Non-Linear Model Predictive Control for Oil Production in Wells Using Electric Submersible Pumps 1: Department of Chemical Engineering, Norwegian University of Science and Technology, Norway; 2: Department of Chemical Engineering, Federal University of Bahia, Polytechnic School, Bahia, Brazil; 3: Department of Electrical and Computer Engineering, Federal University of Bahia, Polytechnic School, Bahia, Brazil.; 4: CENPES, Petrobras R&D Center, Brazil, Av. Horcio Macedo 950, Cid. Universitria, Ilha do Fundo, Rio de Janeiro, Brazil. Life Cycle Assessment of Green Hydrogen Electrofuels in India's Transportation Sector IIT Roorkee, India Probabilistic Design Space Identification for Upstream Bioprocesses under Limited Data Availability Imperial College London, United Kingdom Study of the Base Case in a Comparative Analysis of Recycling Loops for Sustainable Aviation Fuel Synthesis from CO2 University of Liège, Belgium Electricity Bidding with Variable Loads 1: Hitachi Energy Germany AG; 2: Aalto University, Finland Sodium bicarbonate production from CO2 captured in waste-to-energy plants: an Italian case-study 1: Politecnico di Milano, Italy; 2: Acinque Ambiente Srl, Italy; 3: a2a S.p.A., Italy A Decomposition Approach for Operable Space Maximization 1: Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, London SW7 2AZ, United Kingdom; 2: Siemens Industry Software, London W6 7HA, United Kingdom Non-invasive Tracking of PPE Usage in Research Lab Settings using Computer Vision-based Approaches: Challenges and Solutions Indian Institute of Technology, Madras, India Integrating batch operations involving liquid-solid mixtures into continuous process flows Universidad de la República, Facultad de Ingeniería, Uruguay Enhancing decision-making by prospective Life Cycle Assessment linked to Integrated Assessment Models: the roadmap of formic acid production University of Cantabria, Spain Towards Self-Tuning PID Controllers: A Data-Driven, Reinforcement Learning Approach for Industrial Automation LSU, United States of America Energy integration of an intensified biorefinery scheme from waste cooking oil to produce sustainable aviation fuel 1: Faculty of Engineering, Monash University, Australia; 2: Facultad de Ingeniería, Universidad Autónoma de Querétaro, Mexico Integrating Renewable Energy and CO₂ Utilization for Sustainable Chemical Production: A Superstructure Optimization Approach Tsinghua University, China, People's Republic of Sustainable production of L-lactic acid from lignocellulosic biomass using a recyclable buffer: Process development and techno-economic evaluation School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea Potential of chemical looping for green hydrogen production from biogas: process design and techno-economic analysis School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea Data-Driven Soft Sensors for Process Industries: Case Study on a Delayed Coker Unit 1: Beijing University of Chemical technology, China, People's Republic of; 2: Ingenero Inc. 4615 Southwest Freeway, Suite 320, Houston TX 77027, USA Retrofitting AP-X LNG Process Through Mixed Refrigerant Composition variation: A Sensitivity Analysis Towards Decarbonization Objective Chemical Engineering department, Qatar University, Qatar Performance Evaluation of Gas Turbine Combined Cycle Plants with Hydrogen Co-Firing Under Various Operating Conditions 1: Korea Institute of Industrial Technology, Korea, Republic of (South Korea); 2: School of Mechanical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea Modelling of Woody Biomass Gasification for process optimization The University of Tokyo, Japan Comparative analysis of conventional and novel low-temperature and hybrid technologies for carbon dioxide removal from natural gas Politecnico di Milano, Italy Development of Chemical Recycling System for NOx Gas from NH3 Combustion Organization for Programs on Environmental Sciences, Graduate School of Arts and Sciences, The University of Tokyo, Japan Hybrid Model: Oxygen balance for the development of a digital twin 1: Technical University Denmark, Denmark; 2: Novonesis, Fermentation Pilot Plant An integrated approach for the sustainable water resources optimisation 1: Optimisation of Production Systems Lab, Mechanical Engineering Department, University of West Attica; 2: Soft Energy Applications and Environmental Protection Lab., University of West Attica Streamlined Life-Cycle Assessments of Chemicals Based on Chemical Taxonomies Institute for Chemical and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zurich, Vladimir-Prelog-Weg 1, 8093 Zurich, Switzerland Aspen Plus Teaching: Spread or Compact Approach 1: LEPABE, Laboratory for Process Engineering, Environment, Biotechnology and Energy, Chemical Engineering Department, Faculty of Engineering, University of Porto, Porto, Portugal; 2: ALiCE, Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Porto, Portugal; 3: CERENA , Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Portugal Integration of Life Cycle Assessment into the Optimal Design of Hydrogen Infrastructure for Regional-Scale Deployment 1: Laboratoire de Génie Chimique, Université Toulouse, CNRS, INPT, Toulouse, France; 2: LAboratoire PLAsma et Conversion d'Énergie, INPT, Toulouse, France; 3: European Institute for Energy Research, Emmy-Noether Straße 11, Karlsruhe, Germany Streamlining Catalyst Development through Machine Learning: Insights from Heterogeneous Catalysis and Photocatalysis Brandenburg University of Technology Cottbus-Senftenberg, Germany Life Cycle Design of a Novel Energy Crop “Sweet Erianthus” by Backcasting from Process Simulation Integrating Agriculture and Industry 1: Research Center for Advanced Science and Technology, LCA Center for Future Strategy, The University of Tokyo; 2: Tropical Agriculture Research Front, Japan International Research Center for Agricultural Sciences; 3: Presidential Endowed Chair for “Platinum Society”, The University of Tokyo; 4: Research Center for Solar Energy Chemistry, Graduate School of Engineering Science, Osaka University; 5: Institute for Future Initiatives, The University of Tokyo Reversible Solid Oxide Cells and Long-term Energy Storage in Residential Areas EPFL, Switzerland A Comparative Analysis of Industrial Edge MLOps prototype for ML Application Deployment at the edge of Process Industry Technische Universität Dresden, Germany Energy Water Nexus Resilience Analysis Using Integrated Resource Allocation Approach 1: Texas A & M, United States of America; 2: Hamad Bin Khalifa University , Qatar Technoeconomic Analysis of a Novel Amine-Free Direct Air Capture System Integrated with HVAC 1: Hamad Bin Khalifa University College of Science and Engineering, Qatar; 2: Qatar Environment and Energy Institute (QEERI), Doha, Qatar.; 3: Corresponding author’s email: aamhamed@hbku.edu.qa Computer-Aided Molecular Design for Citrus and Coffee Wastes Valorisation 1: University of São Paulo, Brazil; 2: Laboratoire de Génie Chimique, France Introduction of carbon capture technologies in industrial symbioses for decarbonization Laboratoire de Genie Chimique, Toulouse INP, CNRS, Université Paul Sabatier, France Temporal Decomposition Scheme for Designing Large-Scale CO2 Supply Chains Using a Neural-Network Based Model for Forecasting CO2 Emissions University of Alicante, Spain Dynamic simulation of turquoise hydrogen production using a regenerative non-catalytic pyrolysis reactor under various heat sources 1: Korea Institute of Industrial Technology, Korea, Republic of (South Korea); 2: Yonsei university, Korea, Republic of (South Korea) Empowering Engineering with Machine Learning: Hybrid Application to Reactor Modeling 1: IFP Energies nouvelles, France; 2: Université de Lorraine, CNRS, LRGP, France Cascade heat pumps as an enabler for solvent-based post-combustion capture in a cement plant 1: Department of Energy and Process Engineering, NTNU; 2: SINTEF Energy Research Agent-Based Simulation of Integrated Process and Energy Supply Chains: A Case Study on Biofuel Production School of Chemical, Materials and Biological Engineering, University of Sheffield, United Kingdom Steel Plant Electrification: A Pathway to Sustainable Production and Carbon Reduction 1: Qatar University, Qatar; 2: Notre Dame University; 3: University of Belgrade INCEPT: Interpretable Counterfactual Explanations for Processes using Timeseries comparisons 1: Department of Chemical Technology, Indian Institute of Technology Madras, Chennai 600036, India; 2: Department of Applied Mechanics, Indian Institute of Technology Madras, Chennai 600036, India; 3: American Express Lab for Data Analytics and Risk Technology, Indian Institute of Technology Madras, Chennai 600036, India Dynamic Simulation of an Oxy-Fuel Cement Pyro-processing Section 1: Process Systems Engineering (AVT.SVT), RWTH Aachen University, 52074 Aachen, Germany; 2: thyssenkrupp Polysius GmbH, 59269 Beckum, Germany; 3: JARA-ENERGY, 52056 Aachen, Germany; 4: Institute of Climate and Energy Systems, Energy Systems Engineering (ICE-1), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany Multi-Objective Optimization for Sustainable Design of Power-to-Ammonia Plants Politecnico di Milano, Italy Simulating Long-term Carbon Balance on Forestry Management and Woody Biomass Applications in Japan 1: Department of Chemical System Engineering, The University of Tokyo; 2: Presidential Endowed Chair for “Platinum Society”, The University of Tokyo; 3: Institute for Future Initiatives, The University of Tokyo Discovering patterns in Food Safety Culture by k-means clustering 1: BioTeC+ KU Leuven; 2: University of West Attica, Greece Development and Integration of a Co-Current Hollow Fiber Membrane Unit for Gas Separation in Process Simulators Using CAPE-OPEN Standards Politecnico di Milano, Italy A Comparative Study of Aspen Plus and Machine Learning Models for Syngas Prediction in Biomass-Plastic Waste Co-Gasification Departamento de Ingeniería Química Industrial Y del Medioambiente, Escuela Superior de Ingenieros Industriales, Universidad Politécnica de Madrid A Fault Detection Method Based on Key Variable Forecasting Department of Chemical Engineering, Tsinghua University, Beijing 100084, China Rate-Based Modeling Approach of a Rotating Packed Bed for CO2 Chemisorption in aqueous MEA Solutions Process Dynamics and Operations Group - Technical University of Berlin, Germany Machine Learning applications in dairy production 1: BioTeC+ KU Leuven; 2: University of West Attica, Greece Dynamic Modelling of CO2 Capture with Hydrated Lime: Integrating Porosity Evolution, Evaporation, and Temperature Variations University of Liège, Belgium Integrated LCA and Eco-design Process for Hydrogen Technologies: Case Study of the Solid Oxide Electrolyser. 1: CIRAIG, Polytechnique Montréal, Montréal, Canada; 2: HES-SO Valais-Wallis, Sion, Switzerland Decision Support Tool for Technology Selection in Industrial Heat Generation: Balancing Cost and Emissions Texas A&M University at Qatar, Qatar Assessing Distillation Processes through Sustainability Indicators Aligned with the Sustainable Development Goals Budapest University of Technology and Economics, Hungary Strategies for a more Resilient Green Haber-Bosch Process 1: Centro de Química Estrutural, Institute of Molecular Sciences, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001, Portugal; 2: Centro de Recursos Naturais e Ambiente, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001, Portugal Process simulation and thermodynamic analysis of newly synthesized pre-combustion CO2 capture system using novel Ionic liquids for H2 production Qatar University, Qatar Mechanistic and Data-Driven Models for Predicting Biogas Production in Anaerobic Digestion Processes 1: University of Surrey, United Kingdom; 2: University of Manchester, United Kingdom Application and comparison of optimization methods for an Energy Mix optimization problem 1: UniLaSalle, UPJV, B2R GeNumEr, U2R 7511, 60000 Beauvais, France; 2: UniLaSalle, UPJV, B2R GeNumEr, U2R 7511, 80000 Amiens, France; 3: Syndicat mixte de l'aéroport de Beauvais-Tillé (SMABT), 1 rue du Pont de Paris - 60000 Beauvais Insights into the Development and Implementation of Soft Sensors in Industrial Settings 1: Department Chemical Engineering, Indian Institute of Technology Madras, Chennai, 600036, India; 2: American Express Lab for Data Analytics, Risk & Technology, Indian Institute of Technology Madras, Chennai, 600036, India Synthesis of Distillation Flowsheets with Reinforcement Learning using Transformer Blocks Faculty of Science and Technology, University of Twente, the Netherlands Machine Learning Surrogate Models for Atmospheric Dispersion: A Time-Efficient Approach to Air Quality Prediction 1: Polytechnic University of Catalonia, Spain; 2: Abdelmalek Essaadi University, Morocco Comparative Analysis of PharmHGT, GCN, and GAT Models for Predicting LogCMC in Surfactants LSU, United States of America Short-cut Correlations for CO2 Capture Technologies in Small Scale Applications University of Liege, Belgium Mixed-Integer Bilevel Optimization Problem Generator and Library for Algorithm Evaluation and Development University of Wisconsin-Madison, United States of America Surface Tension Data Analysis for Advancing Chemical Engineering Applications 1: Center for Industrial Process Technology, Department of Chemical Engineering, KU Leuven, Agoralaan Building B, 3590 Diepenbeek, Belgium; 2: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 6, Kjemiblokk 4, Trondheim 7043, Norway Design considerations for hardware based acceleration of molecular dynamics University of Sheffield, United Kingdom A Novel AI-Driven Approach for Adsorption Parameter Estimation in Gas-Phase Fixed-Bed Experiments 1: Laboratory of Separation and Reaction Engineering−Laboratory of Catalysis and Materials (LSRE LCM), Department of Chemical Engineering, University of Porto, Porto, 4200-465, Portugal; 2: ALiCE−Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Porto, 4200-465, Portugal; 3: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 4, Kjemiblokk 5, Trondheim, 793101, Norway Integration of Graph Theory and Machine Learning for enhanced process synthesis and design of wastewater treatment networks 1: Department of Chemical Engineering, Rowan University, Glassboro, New Jersey, USA; 2: Sustainability Competence Center, Széchenyi István University, Győr, Hungary; 3: Department of Physics, Indian Institute of Technology, Kharagpur, India An Automated CO2 Capture Pilot Plant at ULiège: A Platform for the Validation of Process Models and Advanced Control University of Liège, Belgium A COMPARISON OF ROBUST MODELING APPROACHES TO COPE WITH UNCERTAINTY IN INDEPENDENT TERMS, CONSIDERING THE FOREST SUPPLY CHAIN CASE STUDY 1: Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada (UNC-CONICET), Universidad Nacional de Córdoba. Facultad de Ciencias Exactas, Físicas y Naturales. Av. Vélez Sarsfield 1611, X5016GCA Ciudad Universitaria, Córdoba, Argentina; 2: Department of Chemical Engineering, Carnegie Mellon University, 5000 Forbes Ave, Pittsburgh PA 15213 |
|||||
| 2:30pm - 3:50pm |
T6: Digitalization and AI - Session 6 Location: Zone 3 - Room D049 Chair: Marco Seabra Reis Co-chair: Leonhard Urbas Application of Artificial Intelligence in process simulation tool 1: AVEVA Group Ltd, United States of America; 2: Cognizant Technology Solutions U.S. Corporation, United States of America 2:50pm - 3:10pm Reinforcement Learning-Based Optimization of Shell and Tube Heat Exchangers 1: LSRE-LCM – Laboratory of Separation and Reaction Engineering - Laboratory of Catalysis and Materials, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, Porto, 4200-465, Portugal; 2: ALiCE – Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, Porto, 4200-465, Portugal; 3: Chemical Engineering Department, Norwegian University of Science and Technology, Sem Sælandsvei 4, Kjemiblokk 5, Trondheim, 793101, Norway 3:10pm - 3:30pm Structural Optimization of Translucent Monolith Reactors through Multi-objective Bayesian Optimization 1: KU Leuven, Department of Chemical Engineering, Centre for Industrial Process Technology; 2: Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU) 3:30pm - 3:50pm A novel approach to gradient evaluation and efficient deep learning: A hybrid method Brandenburg University of Technology Cottbus-Senftenberg, Germany |
||||||
| 2:30pm - 4:30pm |
T1: Modelling and Simulation - Session 9 - Including keynote Location: Zone 3 - Room D016 Chair: Abderrazak Latifi Co-chair: Jean Felipe Leal Silva Keynote: Automated Identification of Kinetic Models for Nucleophilic Aromatic Substitution Reaction via DoE-SINDy University College London, United Kingdom 3:10pm - 3:30pm Mechanistic Modeling of Capacity Fade for Lithium-Metal Batteries Chungnam National University, Korea, Republic of (South Korea) 3:30pm - 3:50pm A Novel Bayesian Framework for Inverse Problems in Precision Agriculture Oklahoma State University, United States of America 3:50pm - 4:10pm Mathematical modelling and optimisation of electrified reverse water gas shift reactor 1: Chonnam National University, Korea, Republic of (South Korea); 2: Korea Research Institute of Chemical Technology 4:10pm - 4:30pm Bifurcation Behaviour of CSTR Models Under Parametric Uncertainty: A PCE-Based Approach KU Leuven, Belgium |
T2: Sustainable Product Development and Process Design - Session 8 Location: Zone 3 - Room E032 Chair: Zhihong Yuan Co-chair: Thomas Alan Adams II Simultaneous Optimization of a Green Ammonia Production System with Heat Integration The University of Manchester, United Kingdom 2:50pm - 3:10pm Assessing the Economic Viability of Green Methanol Production: The Critical Role of CO₂ Purity in Green Methanol Processes 1: GasN2, Carrer Roure Gros, 23, Sentmenat, Barcelona, 08181, Spain; 2: Chemical Engineering Department, Universitat Politècnica de Catalunya, Escola d’Enginyeria de Barcelona Est (EEBE), Av. Eduard Maristany, 16, 08019, Barcelona, Spain 3:10pm - 3:30pm Insights on CO2 Utilization through Reverse Water Gas Shift Reaction in Membrane Reactors: A Multi-scale Mathematical Modeling Approach 1: Faculty of Chemical Engineering, Technion - Israel Institute of Technology, Haifa 3200003, Israel; 2: Grand Technion Energy Program, Technion - Israel Institute of Technology, Haifa, 3200003, Israel; 3: Department of Chemical & Biomolecular Engineering, University of Connecticut, Storrs, CT 06269, USA; 4: Center for Clean Energy Engineering, University of Connecticut, Storrs, CT 06269, USA 3:30pm - 3:50pm Model-based Optimal Design and Analysis of Thermochemical Storage and Release of Hydrogen via the Reversible Redox of Iron Oxide/Iron Brandenburg University of Technology Cottbus-Senftenberg, Germany 3:50pm - 4:10pm Techno-Economic and Prospective Life Cycle Assessment of Sustainable Propanol Production Pathways 1: Institute for Chemical and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zurich, Vladimir-Prelog-Weg 1, 8093 Zurich, Switzerland; 2: Institute of Environmental Sciences (CML), Leiden University, Einsteinweg 2, 2333 CC Leiden, The Netherlands 4:10pm - 4:30pm Optimizing the Selection of Solvents for the Dissolution and Precipitation of Polyethylene 1: Department of Chemical Engineering, Sargent Centre for Process Systems Engineering, Imperial College London, UK; 2: TUM School of Life Sciences, Technical University of Munich, Germany; 3: Campus Straubing for Biotechnology and Sustainability, Technical University of Munich, Germany |
T5: Concepts, Methods and Tools - Session 7 Location: Zone 3 - Room E033 Chair: Juan Segovia-Hernandez Co-chair: Antonio del Rio Chanona Modified Murphree Efficiency for Realistic Modeling of Liquid-Liquid Extraction Stage Efficiencies Aalto University, Finland 2:50pm - 3:10pm Differentiation between Process and Equipment Drifts in Chemical Plants TU Dresden, Germany 3:10pm - 3:30pm A superstructure approach for optimization of Simulated Moving Bed (SMB) chromatography University College London, United Kingdom 3:30pm - 3:50pm Design Space Exploration via Gaussian Process Regression and Alpha Shape Visualization Sargent Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, United Kingdom 3:50pm - 4:10pm Langmuir.jl: An efficient and composable Julia package for adsorption thermodynamics. 1: Norwegian University of Science and Technology; 2: California Institute of Technology; 3: Universidad de Concepción |
T7: CAPEing with Societal Challenges - Session 6 Location: Zone 3 - Aula D002 Chair: Carlos Pozo Fernández Co-chair: Gonzalo Guillén-Gosálbez Understanding the Impact of the European Chemical Industry Against Planetary Boundaries 1: LEQUiA, Institute of the Environment, University of Girona, E-17071 Girona, Spain; 2: Departament d'Enginyeria Química, Universitat Rovira i Virgili, Av. Països Catalans 26, 43007 Tarragona, Spain 2:50pm - 3:10pm An optimization-based law of mass action precipitation/dissolution model 1: Carnegie Mellon University, Pittsburgh, PA 15213, USA; 2: Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA 94720, USA 3:10pm - 3:30pm Multi-Stakeholder Optimization for Identification of Relevant Life Cycle Assessment Endpoint Indicators 1: Department of Chemical and Biomolecular Engineering, University of Delaware, Newark, Delaware, United States of America.; 2: Chemical and Energy Technology Department, Universidad Rey Juan Carlos, Calle Tulipan s/n, Móstoles, Madrid, Spain. 3:30pm - 3:50pm Towards Sustainable Household Organic Waste Management: Modeling and Analysis 1: Université Paris-Saclay, INRAE, AgroParisTech, UMR SayFood, 91120 Palaiseau, France; 2: Fondation AgroParisTech, Chaire CoPack, 91120 Palaiseau, France 3:50pm - 4:10pm Assessing the Environmental Impact of Global Hydrogen Supply through the Lens of Planetary Boundaries Universitat Rovira i Virgili, Spain 4:10pm - 4:30pm Engineering the Final Frontier: The Role of Chemical and Process Systems Engineering in Space Exploration University of Twente, Netherlands, The |
T8: CAPE Education and Knowledge Transfer - Session 3 Location: Zone 3 - Aula E036 Chair: Seyed Soheil Mansouri Teaching computational tools in chemical engineering curriculum in preparation for the capstone design project Department of Chemical Engineering, University College London, Torrington Place, WC1E 7JE London, UK 2:50pm - 3:10pm Food for thought: Delicious problems for PSE courses Technion, Israel 3:10pm - 3:30pm Challenges for modelling in chemical engineering education in the Netherlands 1: Department of Chemical Engineering, Faculty of Applied Sciences, Delft University of Technology, van der Maasweg 9, 2629HZ, Delft, The Netherlands; 2: Department of Chemical Engineering, Faculty of Science and Technology, University of Twente, Meander, kamer 216, Postbus 217, 7500 AE, Enschede, The Netherlands; 3: Department of Biotechnology, Faculty of Applied Sciences, Delft University of Technology, van der Maasweg 9, 2629HZ, Delft, The Netherlands; 4: Electrical Engineering Department, Eindhoven University of Technology, Eindhoven, 5612 AP, The Netherlands; 5: Freelancer 3:30pm - 3:50pm Teaching Digital Twins in Process Control using the Temperature Control Lab University of Notre Dame, United States of America 3:50pm - 4:10pm An integrated VR/MR and flipped classroom concept for enhanced chemical and biochemical engineering education 1: University of Cantabria, Spain; 2: Technical University of Denmark, Denmark 4:10pm - 4:30pm Integrated Project in the Master of Chemical Engineering and Materials Science at the University of Liège université de Liège, Belgium |
T9: PSE4Food and Biochemical - Session 6 Location: Zone 3 - Room E030 Application of pqEDMD to modelling and control of bioprocesses University of Mons, Belgium 2:50pm - 3:10pm Incorporating Process Knowledge into Latent-Variable Models: An Application to Root Cause Analysis in Bioprocesses 1: Techical University of Denmark, Department of Applied Mathematics and Computer Science, Matematiktorvet, Building 303B, DK-2800 Kgs. Lyngby, Denmark; 2: Novo Nordisk A/S, PS API Manufacturing, Science & Technology, Smørmosevej 17‐19, DK‐2880 Bagsværd, Denmark; 3: Novo Nordisk A/S, PS API Expansions, Hallas Alle 1, DK-4400 Kalundborg, Denmark 3:10pm - 3:30pm Future Forecasting of Dissolved Oxygen Concentration in Wastewater Treatment Plants using Machine Learning Techniques 1: Turkish Petroleum Refinery, 41780, Körfez, Kocaeli, Turkey; 2: Turkish Petroleum Refinery, 71480, Merkez, Kırıkkale, Turkey 3:30pm - 3:50pm Exploring Design Space and Optimization of nutrient factors for maximizing lipid production in Metchnikowia pulcherrima with Design of Experiments The University of Manchester, United Kingdom 3:50pm - 4:10pm Adaptable dividing-wall column design for intensified purification of butanediols after fermentation Delft University of Technology, The Netherlands |
T10: PSE4BioMedical and (Bio)Pharma - Session 4 Location: Zone 3 - Room E031 Chair: Boram Gu Co-chair: Gintaras Reklaitis Integrating process and demand uncertainty in capacity planning for next-generation pharmaceutical supply chains 1: The Sargent Centre for Process Systems Engineering, Imperial College London, UK; 2: Department of Chemical Engineering, Imperial College London, UK 2:50pm - 3:10pm Data-driven modeling of a Continuous Direct Compression Tableting Process using sparse identification 1: KU Leuven, Belgium; 2: Janssen Pharmaceutica NV, Belgium 3:10pm - 3:30pm Cyber-Physical Systems for Digital Medicines Manufacturing: A Self-Optimising Tableting DataFactory Centre for Continuous Manufacturing and Advanced Crystallisation (CMAC), University of Strathclyde, Glasgow, United Kingdom 3:30pm - 3:50pm Closed-loop data-driven model predictive control for a wet granulation process of continuous pharmaceutical tablet production 1: Department of Chemical Engineering, The Sargent Centre for Process Systems Engineering, University College London, Torrington Place, London WC1E 7JE, UK; 2: School of Chemical and Environmental Engineering, Technical University of Crete, Chania, Crete, GR 73100, Greece 3:50pm - 4:10pm Mechanistic Modelling of Thrombolytic Therapy and Model-based Optimisation of Treatment Protocols 1: School of Chemical Engineering, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea; 2: Department of Chemical Engineering, Imperial College London, South Kensington Campus, London SW7 2AZ, UK 4:10pm - 4:30pm Process analysis of end-to-end continuous pharmaceutical manufacturing using PharmaPy Davidson School of Chemical Engineering, Purdue University, USA |
| 3:00pm - 4:00pm |
Brewery visit Location: On-campus brewery |
||||||
| 3:50pm - 4:30pm |
T4: Model Based optimisation and advanced Control - Session 7 Location: Zone 3 - Room D049 Chair: NABEEL ABOGHANDER Co-chair: Vasile Mircea Cristea Cost-effective Process Design and Optimization of Decarbonized Utility Systems Integrated with Renewable Energy and Carbon Capture Systems 1: Department of Chemical Engineering, Hanyang University, Republic of Korea; 2: FG Prozess, und Anlagentechnik, Brandenburgische Technische Universität Cottbus-Senftenberg, Germany |
||||||
| 4:30pm - 5:30pm |
Closing & Award Ceremony (Eurecha Award and presentation of the winning contribution, Frontiers in Energy - Eurecha Award to the best poster, mobility survey price, ESCAPE|36 announcement) Location: Zone 1 - Aula Louisiane |
||||||