Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
Session Overview
Session
PO.08: Implants/orthotics/prosthetics/devices
Time:
Monday, 08/Jul/2019:
4:15pm - 4:50pm

Session Chair: Yan Chevalier
Session Chair: Kathleen Denis
Location: Arcade Court

Show help for 'Increase or decrease the abstract text size'
Presentations

PO.08.1: FORCE AND MOTION SENSING IN TOTAL HIP ARTHROPLASTY: INSTRUMENTED IMPLANT FOR OPTIMUM SOFT TISSUE TENSION

J. C. Wei1, B. Blaauw2, D. van der Pol1, R. Boedhoe1, N. Zhang1, J. Dankelman1, T. Horeman1

1Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology, 2628 CN Delft, The Netherlands; 2Department of Orthopaedic Surgery, Elkerliek Hospital, 5707 HA Helmond, The Netherlands



PO.08.2: IMPACT OF TITANIUM ELASTIC NAIL PRE–CONTOURING ON THE FIXATION OF PAEDIATRIC DIAPHYSEAL FOREARM FRACTURES

Y. Pukalski1,2, P. Yanev1,2, A. Baltov2, M. Rashkov2, F. Schmidutz3, I. Zderic1, C. Sprecher1, G. Richards1, B. Gueorguiev1, D. Enchev2

1AO Research Institute Davos, Switzerland; 2University Multiprofile Hospital for Active Treatment and Emergency Medicine 'N I Pirogov', Bulgaria; 3Berufsgenossenschaftliche Unfallklinik Tübingen, Germany



PO.08.3: EVALUATION OF VERTEBRAE LOADING BY THE INTERBODY FUSION CAGES MADE FROM TI ALLOY WITH BIO-ACTIVE SURFACE AND PEEK

Z. Horak1, T. Bouda2, J. Strnad3

1College of Polytechnics Jihlava, Czech Republic; 2CTU in Prague, Faculty of Mechanical Engineering, Czech Republic; 3Lasak, Czech Republic



PO.08.4: VIRTUAL DESIGN METHOD TO EXPLOIT KINEMATIC ANALYSIS IN THE MAKING OF 3D-PRINTED UPPER-LIMB ORTHOSES

J. Romanò, L. Garavaglia, F. Lazzari, S. Pittaccio

National Research Council of Italy, Institute of Condensed Matter Chemistry and Technologies for Energy (CNR-ICMATE)



PO.08.5: LATTICE OPTIMIZATION OF LONG BONES ENDOPROSTHESIS GEOMETRY

P. Bol’shakov1, O. Gerasimov1, N. Kharin1, R. Kashapov1, I. Raginov1,2, E. Koroleva1, O. Sachenkov1,3

1Kazan Federal University, Russian Federation; 2Republic Clinical Hospital, Russia; 3Kazan National Research Technical University, Russia



PO.08.6: PRECLINICAL WORST-CASE TESTING OF SPINAL RODS: PRELIMINARY RESULTS

C. R. Roesler1, G. Genovese2, T. Garcia2, E. A. Fancello1

1Universidade Federal de Santa Catarina, Brazil; 2Víncula, Brazil



PO.08.7: STIMATION OF THE LOAD-BEARING CAPACITY OF THE REINFORCED ACETABULAR COMPONENT WITH ACETABULAR PATHOLOGY

P. Bolshakov1, T. Rashid2, A. Khabibullin1, A. Mazurenko2, E. Koroleva1, O. Sachenkov1,3

1Kazan Federal University, Russia; 2Russian Scientific Research Institute of Traumatalogy and Orthopedics, Russia; 3Kazan National Research Technical University, Russia



PO.08.8: IMPACT OF MECHANIZATION ON THE MECHANICAL PROPERTIES OF INTRACORNEAL RING SEGMENTS (ICRS)

J. Flecha Lescun1, L. Remón2, B. Calvo1,3, M. Á. Ariza Gracia4

1Instuto de Investigación en Ingeniería de Aragón (i3A), Spain; 2Departamento de Físca Aplicada, Universidad de Zaragoza, Spain; 3Centro de Investigación Biomédica en Red: Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Spain; 4ARTORG Center for Biomedical Engineering Research, Universität Bern, Switzerland



PO.08.9: A COMPUTATIONAL INVESTIGATION OF MICROSTRUCTURE-SENSITIVE PLASTICITY AND CRACK NUCLEATION IN MAGNESIUM ORTHOPAEDIC IMPLANTS

E. Boland, E. A. Gallagher, P. McGarry

Discipline of Biomedical Engineering, National University of Ireland Galway, Ireland