Conference Agenda

4:30pm - 4:45pm

Effects of gas nitriding on static and dynamic mechanical behaviour of micro-porous titanium scaffolds prepared by direct ink writing

Karel Slámečka^1,2, Adelia Kashimbetova¹, Lenka Drotárová¹, Serhii Tkachenko¹, Pavel Gejdoš¹, Petr Skalka^1,2, Jaroslav Pokluda^1,2,3, Ladislav Čelko¹, Edgar Benjamin Montufar¹

¹Central European Institute of Technology, Brno University of Technology, Czech Republic; ²Faculty of Mechanical Engineering, Brno University of Technology, Czech Republic; ³Faculty of Special Technology, University of Trenčín, Slovakia

4:45pm - 5:00pm

PREDICTION OF CRACK FRONT SHAPE UNDER THE INFLUENCE OF COMPRESSIVE RESIDUAL STRESS USING FINITE ELEMENT MODELLING AND EXPERIMENTAL VAIDATION

Reza Bab Nadi¹, Henri Champliaud¹, Mohammad Jahazi¹, Jacques Lanteigne², Xuan-Tan Pham¹

¹École de Technologie Supérieure, Department of Mechanical Engineering, 1100 Notre-Dame Street West, Montreal, QC, H3C 1K3, Canada; ²Hydro-Québec, Institut de recherche d’Hydro-Québec, Varennes, Québec J3X 1S1, Canada

5:00pm - 5:15pm

Effect of different residual stress engineering techniques on the residual stress and fatigue crack growth behaviour in AA7075

Jonas Lehmann¹, Volker Ventzke², Falk Dorn², Christian Knothe-Horstmann², Benjamin Klusemann^1,2, Nikolai Kashaev², Noomane Ben Khalifa^1,2

¹Leuphana University Lüneburg, Institute for Production Technology and Systems (IPTS), Germany; ²Helmholtz-Zentrum Hereon, Institute of Material and Process Design, Germany

5:15pm - 5:30pm

QUANTIFICATION OF FATIGUE LIFE IMPROVEMENT IN S550MC WELDMENTS BY HFMI TREATMENT USING 2D SBFM MODEL

Mohd Mahatab, Rakesh Ranjan

Indian Institute of Technology Roorkee, India

5:30pm - 5:45pm

Development of a numerical model for estimating the hardness of steel after quenching

Ema Kukuljan, Robert Basan, Dario Iljkić, Ela Marković

University Of Rijeka, Faculty of Engineering, Croatia