| Session | ||
Poster: Poster Session
| ||
| Presentations | ||
COMPUTATIONAL ANALYSIS OF SIZE EFFECTS IN MINIATURE COMPACT TENSION SPECIMENS THROUGH COHESIVE ZONE ELEMENTS 1Middle East Technical University, Turkiye; 2Institute of Nuclear Materials Science, SCK CEN, Belgium A cellular automata model for the fracture behavior of carbon nanotubes City University of Hong Kong, China, People's Republic of A method for predicting the torsional fatigue life of metallic specimens containing small defects 1Fukuoka University Graduate School, 8-19-1, Nanakuma, Jonan-ku, Fukuoka-shi, Fukuoka, 814-0180, JAPAN; 2Department of Mechanical Engineering, 8-19-1, Nanakuma, Jonan-ku, Fukuoka-shi, Fukuoka, 814-0180, JAPAN; 3Institute of Materials Science and Technology, Fukuoka University, 8-19-1, Nanakuma, Jonan-ku, Fukuoka-shi, Fukuoka, 814-0180, JAPAN Prediction of fatigue failure based on average stress criterion and stress concentration factors 1Institute of Physics of Materials, Czech Academy of Sciences; 2Faculty of Mechanical Engineering, Brno University of Technology A NUMERICAL STUDY OF THE BALLISTIC PERFORMANCE OF MULTI-LAYERED TARGETS THROUGH UNCOUPLED DAMAGE MODELS Middle East Technical University, Department of Aerospace Engineering, 06800 Ankara, Turkiye A STUDY ON THE DURABILITY OF AUTOMOTIVE RUBBER COMPONENT 1Korea Institute of Machinery & Materials; 2TSR Co. LTD.; 3TSR Co. LTD. An investigating on explosive expanding fracture of 45# steel cylinders by SPH method Faculty of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, Zhejiang, China ANALYZING FRACTURE CAUSES IN BATHTUBS DEEP DRAWING PROCESS Hassiba Benbouali University Of Chlef, Algeria Analyzing Plastic Zone Magnitude around a Crack Tip; Exact vs. Approximate Analytical Solutions 1University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia; 2University of Zagreb, Faculty of Metallurgy, Sisak, Croatia Assessment of crack propagation under mixed-mode conditions 1Czech Academy of Sciences, Institute of Physics of Materials, Czech Republic; 2Brno University of Technology, Faculty of Civil Engineering, Czech Republic Comparative evaluation of surgical methods in the treatment of chronic irreparable supraspinatus tears 1National Technical University of Athens, School of Applied Mathematical and Physical Sciences, Department of Mechanics, Laboratory of Biomechanics and Biomedical Physics; 2National and Kapodistrian University of Athens, School of Medicine COMPARISON OF THE STIFFNESSES OF THREE TYPES OF POROUS STRUCTURES 1TU of Košice, FMT with a seat in Prešov, Slovak Republic; 2Faculty of Technology, Tomas Bata University in Zlin, Nam. T.G. Masaryka 275, 760 01 Zlin, Czech Republic; 3Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Zagreb, Croatia CREEP FATIGUE LIFE PREDICTION ON NOTCHED BAR SPECIMENS OF 316 STAINLESS STEEL USING A CYCLIC VISCOPLASTIC CREEP MODEL IHI Corporation, Japan Critical crack size evaluation for RPV SG nozzle subjected to pressurized thermal shock Korea Atomic Energy Research Institute DAMAGE AND CRACK EVOLUTION OF NCM POLYCRYSTALLINE PARTICLES IN LIBS BASED ON COHESIVE ZONE MODEL 1East China University of Science and Technology, People's Republic of China; 2University of Strathclyde, Department of Mechanical & Aerospace Engineering UK DETERMINATION OF FRACTURE MECHANICS PARAMETERS ON PIPE RING NOTCH TENSILE (PRNT) SPECIMENS 1Innovation center of the faculty of Mechanical Engineering, Serbia; 2University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11000 Belgrade, Serbia; 3University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia EFFECT ASSESSMENT OF FATIGUE BY CYCLIC TENSILE LOADING ON DAMAGE EVOLUTION IN GLASS/EPOXY COMPOSITE TUBE LAMINATE 1CHLEF UNIVERSITY; 2CHLEF UNIVERSITY; 3CHLEF UNIVERSITY; 4CHLEF UNIVERSITY EFFECT OF CYCLIC HARDENING ON STRESS CORROSION CRACKING BEHAVIOR OF NICRMOV STEEL WELDED JOINTS 1East China University of Science and Technology; 2University of Shanghai for Science and Technology Effect of hydrogen on tensile and fatigue properties of copper-based cast alloy 1Fukuoka University, 8-19-1 Nanakuma, Jonan-ku, Fukuoka, Japan; 2Takatori Seisakusho Co., Ltd., 213-1 Yoshiimachi, Ukiha, Fukuoka, Japan; 3National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki, Japan EFFECT OF PRECIPITATION HAREDENING ON THE FATIGUE LIMIT OF A BERYLLIUM COPPER ALLOY Fukuoka University, Japan EFFECT OF TEMPERATURE ON THE TOUGHNESS OF BILAYER ABS/15% PMMA COMPOSITE SHEETS Hassiba Benbouali Univesity of Chlef, Algeria Evaluation of Bonding Strength of Epoxy Adhesive Joints with Weak Bonding Using Laser Shock-wave Adhesion Tests (LaSAT) 1Precision Engineering Course, Graduate School of Science and Engineering, Chuo University, Japan; 2Department of Precision Mechanics, Department of Precision Mechanics, Faculty of Science and Engineering, Chuo University, Japan Evaluation of Hydrogen Compatibility of Cr-Mo Steel by the Continuous Hydrogen Charging Test 1Fukuoka University, Graduate School of Engineering; 2Fukuoka University, Department of Mechanical Engineering.; 3Fukuoka University, Institute of Materials Science and Technology Evaluation of Interfacial Bonding Strength of CFRP/Epoxy Resin Adhesive Using Laser Shock-Wave Adhesion Test 1Precision Engineering Course, Graduate School of Science and Engineering, Chuo University, Japan; 2Department of Precision Mechanics, Faculty of Science and Engineering, Chuo University Japan EXPERIMENTAL DETERMINATION AND NUMERICAL VALIDATION OF THE FATIGUE GROWTH RATE OF A LOW CARBON MICROALLOYED STEEL 1Innovation Centre of the Faculty of Technology and Metallurgy; 2University of Belgrade, Faculty of Technology and Metallurgy; 3Institute for Testing of Materials-IMS Institute FAILURE ANALYSIS FOR A HYPOCYCLOID-TYPE CRACK WITHIN A THERMO-ELASTIC MATERIAL 1National Taiwan University; 2National Taiwan University of Science and Technology FATIGUE PROPERTIES OF A NOVEL CAST QUASICRYSTAL ALUMINUM ALLOY 1Slovenian National Building and Civil Engineering Institute, Slovenia; 2University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Matrials and Metallurgy, Aškerčeva cesta 12, 1000 Ljubljana, Slovenia Fatigue properties of prestrained metastable austenitic stainless steels in presence of hydrogen Fukuoka University, Japan Features of the microdefects formation in geomaterials when exposed to high-power nanosecond electromagnetic pulses Mel’nikov Institute of Comprehensive Exploitation of Mineral Resources RAS, Russian Federation Finite element simulation of frost heaving induced cracking in rock-like materials using a phase field approach 1LSPM Sorbonne Paris Nord, France; 2University of Transport and Communications Fracture behaviour prediction of an historical bridge steel elements using machine learning models 1Transilvania University of Brasov, Romania; 2Central Building Research Institute, Roorkee, India; 3University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia; 4Innovation center of the Faculty of Mechanical Engineering, Belgrade, Serbia; 5Innovation center of the Faculty of Mechanical Engineering, Belgrade, Serbia FRACTURE MODELING AND EXPERIMENTAL STUDY ON INTERFACIAL ADHESION IN A THERMAL BARRIER COATING SYSTEM ON NI-BASED SUPERALLOYS 1Federal Research Centre for Information and Computational Technologies, Russian Federation; 2Siberian Federal University Fracture toughness of shot peened 6060 T6 aluminium alloy 1Materials Engineering, Applied Mechanics and Construction Department, EEI, University of Vigo, Lagoas-Marcosende, 36310 Vigo, Spain; 2LaserOn, CINTECX, University of Vigo, Lagoas-Marcosende, 36310 Vigo, Spain FULL FIELD J-INTEGRALS BY DIGITAL IMAGE CORRELATION VTT, Finland HYDROGEN EMBRITTLEMENT OF AISI 420 STEEL: CONVENTIONAL VS. ADDITIVELY MANUFACTURED 1Slovenian National Building and Civil Engineering Institute (ZAG), Slovenia; 2Institute of Metals and Technology (IMT), Slovenia; 3Université Paris-Saclay, CEA, France Hydrogen-Induced Ductility Losses of Additively Manufactured 17-4 PH Steels with Internal Hydrogen 1Fukuoka University, Japan; 2Industrial Technology Center of Fukui Prefecture, Japan; 3National Institute for Materials Science, Japan IDENTIFICATION BY INVERSE ANALYSIS OF COUPLED HARDENING LAW AND GTN DAMAGE MODEL PARAMETERS OF A COLD ROLLED STEEL Hassiba Benbouali University of Chlef, Algeria IDENTIFYING A STRENGTHENING CONTRIBUTION VOID IN POROUS CERAMIC Ningbo university, China, People's Republic of INFLUENCE OF TEMPERATURE AND SPECIMEN ORIENTATION ON THE IMPACT TOUGHNESS OF MICROALLOYED STEEL 1Innovation Centre of Faculty of Technology and Metallurgy; 2University of Belgrade, Faculty of Technology and Metallurgy; 3IMS Institute Influence of vanadium content on the microstructure, mechanical and electrochemical properties of carbides in Cr-Mo steel 1Faculty of Technical Sciences, University of Priština, Kosovska Mitrovica, Serbia; 2Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia; 3Research Centre, University of Žilina, Žilina, Slovakia; 4Institute for information technologies, Kragujevac INVESTIGATION OF PHYSICOCHEMICAL PROPERTIES OF CHITOSAN BIOPOLYMER FILMS CONTAINING TEA TREE (MELALEUCA ALTERNIFOLIA) OR THYME (THYMUS VULGARIS) ESSENTIAL OIL 1Medical University Varna, Bulgaria; 2Institute of Food Preservation and Quality-Plovdiv, Agricultural Academy of Bulgaria,; 3University of Plovdiv “Paisii Hilendarski”; 4Medical University—Pleven, Faculty of Pharmacy MICRO-MECHANICAL CHARACTERISATION OF HYDROGEN-ENHANCED FATIGUE CRACK GROWTH IN HIGH-CARBON CHROMIUM BEARING STEEL 1Kumamoto University, Japan; 2NSK Ltd., Japan MICROSTRUCTURAL FATIGUE CRACK GROWTH IN SINGLE COLONY OF TI-6AL-4V LAMELLER ALLOY 1Kumamoto University, Japan; 2Kyushu University, Japan; 3University of Birmingham, UK NUMERICAL ANALYSIS OF A PARTIAL HIP IMPLANT FATIGUE BEHAVIOUR 1Innovation Center of Faculty of Mechanical Engineering; 2University of Belgrade, Faculty of Mechanical Engineering NUMERICAL ANALYSIS OF A TRANSPORTATION PIPELINE SYSTEM STRUCTURAL INTEGRITY 1University of Belgrade, Faculty of Mechanical Engineering; 2University of Belgrade, Faculty of Mechanical Engineering PHOTOPOLYMERIZATION 3D PRINTING OF 17-4PH /ZRO2 COMPOSITE STRUCTURE 1Seoul National University of Science and Technology, Mechanical Information Engineering; 2Seoul National University of Science and Technology, Mechanical System Design Engineering Relationship between defects and fatigue limit of cast aluminum alloy 1Fukuoka University, Japan; 2HINODE Holdings Co. Ltd, Japan; 3Fukuoka University, Institute of Materials Science and Technology, Japan Root Cause Failure Analysis of a 9Cr-1Mo tube in the CCR Unit of a Refinery Research Institute of Petroleum Industry, Iran, Islamic Republic of STRESS STATE DEPENDENT PHASE FIELD MODELING OF DUCTILE FRACTURE Middle East Technical University, Department of Aerospace Engineering, 06800 Ankara, Türkiye Study of the performance of a radial turbine operating with butane Oran University of Science and Technology , MOHAMED BOUDIAF Surface Treatment of Thin Metallic Plate using Laser Induced Particle Impact Test (LIPIT) Department of Precision Mechanics, Chuo University, Tokyo, Japan THE EFFECT OF CONSTRAINT ON THE T0 REFERENCE TEMPERATURE OF A533B C1 PRESSURE VESSEL STEEL ASSESSED WITH SMALL-SCALE SE(T) AND SE(B) SPECIMENS VTT Technical Research Centre of Finland Ltd, Finland THE EFFECT OF HEATH TREATMENT OF HIGH STRENGTH STEEL ON DYNAMIC STRENGTH OF HOWITZER CANNON BARREL 1SIJ Ravne Systems d.o.o., Slovenia; 2University of Maribor, Faculty of Mech. Eng.; 3University of Mar del Plata, Faculty of Mech. Eng. THE EFFECT OF HELICAL DIAMETER AND OVALITY ON COLLAPSE PRESSURE OF HELICAL-SHAPED TUBE SUBJECTED TO EXTERNAL PRESSURE 1SMART System Development Division, KAERI (Korea Atomic Energy Research Institute), Korea, Republic of (South Korea); 2Multi-purpose Small Reactor System Development Division, KAERI (Korea Atomic Energy Research Institute), Korea, Republic of (South Korea) The effect of mean shear stress on torsional low-cycle fatigue life of notched AISI 4340 and 300M steels Carleton University, Department of Mechanical and Aerospace Engineering, 1125 Colonel By Drive, Ottawa, Ontario Canada K1S 5B6 The Effect of Porosity on the Experimental Fracture Toughness of Cementitious Materials University of Duisburg-Essen, Germany, Institute for Materials Science and Center for Nanointegration Duisburg-Essen (CENIDE) THE EFFECT OF RECYCLED STEEL FIBERS ON THE FRACTURE RESISTANCE OF CEMENT MORTARS 1Texas A&M University, United States of America; 2Texas State University, United States of America THE EFFECT OF THE TRANSITION FRACTURE TEMPERATURE DEPENDENCE MODEL ON THE CONSERVATISM OF THE REFERENCE TEMPERATURE, T0 1Department of Materials Science and Engineering, University of Sheffield; 2School of Mathematics and Statistics, University of Sheffield The investigation into the mechanism of hydrogen embrittlement of ferritic spheroidal graphite cast iron using porous carbon steel Fukuoka University, Japan THE MECHANICAL PROPERTIES OF X70 STEEL PRE-CHARGED IN BLEND OF HYDROGEN AND METHAN SVÚM a.s., Tovární 2053, 250 88 Čelákovice, Czech Republic THE STORY BEHIND THE BEGINNINGS OF LINEAR ELASTIC FRACTURE MECHANICS (LEFM) 1University of Belgrade, Faculty of Mechanical Engineering; 2University of Belgrade, Faculty of Technology and Metallurgy UNDERSTANDING OF RELATIONSHIP BETWEEN FRACTURE AND SLIP BEHAVIOUR IN PERMENDUR ALLOYS USING MULTISCALE MECHANICAL TESTING OF POLY- AND SINGLE-CRYSTALLINE SPECIMENS 1Kumamoto University, Japan; 2Proterial, Ltd., Japan; 3Shimane University, Japan VERIFICATION OF DIGITAL TWINS TO PREDICT MATERIAL FAILURE IN REAL SITUATION 1Innovation Centre of Faculty of Mechanical Engineering in Belgrade, Serbia; 2University of Belgrade, Faculty of Mechanical Engineering, Serbia; 3University of Belgrade, Departmen of Restorative Odontology and Endodotics,Belgrade, Serbia; 4University of Montenegro, Faculty of Mechanical Engineering Podgorica Verification of digital twins to predict material failure in real situations 1Innovation center of the faculty of Mechanical Engineering, Serbia; 2University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11000 Belgrade, Serbia; 3University of Belgrade, Departmen of Restorative Odontology and Endodotics, Serbia An innovative solution for determining stress intensity factors (SIF) using the GMDH neural network 1Amirkabir University of Technology (Tehran Polytechnic), Iran, Islamic Republic of; 2Imperial College London, London, UK Crack Identification Based on Dynamic Brittle Fracture Initiation Energy in Steel Specimens Using an Improved Artificial Neural Network Marche Polytechnic University, Italy FAILURE ASSESMENT THROUGH VARIOUS UNCOUPLED DAMAGE MODELS IN FLOW FORMING PROCESSES 1Department of Aerospace Engineering, Middle East Technical University, 06800 Ankara, Türkiye; 2Repkon Machine and Tool Industry and Trade Inc., 34980, Istanbul, Türkiye COMPARATIVE NUMERICAL ANALYSIS OF GAP AND OVERLAP EFFECTS ON MECHANICAL PROPERTIES OF VARIABLE STIFFNESS COMPOSITES Dept. of Aerospace Eng., Middle East Technical University, Turkiye FRACTURE BEHAVIORS OF FIBER-REINFORCED COMPOSITE BASED ON CLAMPED SINGLE EDGE NOTCHED TENSILE SPECIMEN Tianjin University, China, People's Republic of DWELL FATIGUE DAMAGE ANALYSIS IN TITANIUM ALLOYS USING CRYSTAL PLASTICITY AND PHASE FIELD FRAMEWORKS Middle East Technical University, Department of Aerospace Engineering, 06800 Ankara, Türkiye COMPARATIVE ANALYSIS OF HYDROGEN CHARGING METHODS AND THEIR IMPACT ON THE MECHANICAL PROPERTIES AND TRAPPING CAPACITY OF AN X70 PIPELINE STEEL Ghent University, Department of Materials, Textiles and Chemical Engineering, Sustainable Materials Sci-ence, Technologiepark-Zwijnaarde 46, 9052, Zwijnaarde, Belgium Influence of grain size and secondary phases on the hydrogen embrittlement sensitivity of Al8(CoCrFeNi)92 high entropy alloy 1Ghent University, Department of Materials, Textiles and Chemical Engineering, Technologiepark 46, 9052 Zwijnaarde, Belgium; 2Institute of Materials and machine mechanics, Dubravska cesta 9, 845 13 Bratislava, Slovakia STRUCTURAL INTEGRITY ASSESSMENT OF OIL STORAGE TANK: NON-DESTRUCTIVE APPROACH ACCORDING TO API CRITERIA 1Innovation Centre of the Facultyof Mechanical Engineering, Belgrade, Serbia, Serbia; 2Mont R Ltd., Belgrade, Serbia; 3University of Belgrade, Faculty of Mechanical Engineering, Serbia | ||