COMPUTATIONAL ANALYSIS OF SIZE EFFECTS IN MINIATURE COMPACT TENSION SPECIMENS THROUGH COHESIVE ZONE ELEMENTS

İlbilge Umay Aydiner, Dmitry Terentyev, Tuncay Yalçinkaya

A cellular automata model for the fracture behavior of carbon nanotubes

Xiaoqiao He

A method for predicting the torsional fatigue life of metallic specimens containing small defects

Haru Fujishima, Yuya Tanaka, Keiji Yanase, Masahiro Endo

Prediction of fatigue failure based on average stress criterion and stress concentration factors

Kamila Kozáková, Jan Klusák

A NUMERICAL STUDY OF THE BALLISTIC PERFORMANCE OF MULTI-LAYERED TARGETS THROUGH UNCOUPLED DAMAGE MODELS

Sümeyye Tekbas, Nazlıcan Gokdemir, Hande Vural, Tuncay Yalçinkaya

A STUDY ON THE DURABILITY OF AUTOMOTIVE RUBBER COMPONENT

Changsu Woo, Sanghee Choi, Jinhyuk Kim

An investigating on explosive expanding fracture of 45# steel cylinders by SPH method

Xinlong Dong, Xinlu Yu, Yingqian Fu, Gangyi zhou

ANALYZING FRACTURE CAUSES IN BATHTUBS DEEP DRAWING PROCESS

Adel HADJ AMAR, Ibrahim ZIDANE, Hamou ZAHLOUL, Amina BELGUEBLI

Analyzing Plastic Zone Magnitude around a Crack Tip; Exact vs. Approximate Analytical Solutions

Dragan Pustaić, Martina Lovrenić-Jugović

Assessment of crack propagation under mixed-mode conditions

Lucie Malíková, Petr Miarka, Mohammad Sami Al Khazali, Stanislav Seitl

Comparative evaluation of surgical methods in the treatment of chronic irreparable supraspinatus tears

Eleni Koumantou, Christopher J. Feroussis, Ermioni D. Pasiou, Stavros K. Kourkoulis

COMPARISON OF THE STIFFNESSES OF THREE TYPES OF POROUS STRUCTURES

Katarina Monkova, Peter Pavol Monka, Iva Rački, Željko Božić

CREEP FATIGUE LIFE PREDICTION ON NOTCHED BAR SPECIMENS OF 316 STAINLESS STEEL USING A CYCLIC VISCOPLASTIC CREEP MODEL

Kenji Tokuda

Critical crack size evaluation for RPV SG nozzle subjected to pressurized thermal shock

Han-Bum Surh, Ik-Joong Kim, Shin-Beom Choi, Kwanghyun Ahn

DAMAGE AND CRACK EVOLUTION OF NCM POLYCRYSTALLINE PARTICLES IN LIBS BASED ON COHESIVE ZONE MODEL

Weiling Luan, Haofeng Chen

DETERMINATION OF FRACTURE MECHANICS PARAMETERS ON PIPE RING NOTCH TENSILE (PRNT) SPECIMENS

Isaak Dragan Trajkovic, Miloš Slobodan Milošević, Aleksandar Stojan Sedmak, Jovan Dobrica Tanaskovic, Bojan Ilija Medjo

EFFECT ASSESSMENT OF FATIGUE BY CYCLIC TENSILE LOADING ON DAMAGE EVOLUTION IN GLASS/EPOXY COMPOSITE TUBE LAMINATE

GHOUAOULA ABDELHAMID, MAIZIA ABDELHAKIM, HABBAR GHANIA, HOCINE ABDELKADER

EFFECT OF CYCLIC HARDENING ON STRESS CORROSION CRACKING BEHAVIOR OF NICRMOV STEEL WELDED JOINTS

Yuhui Huang, Shuo Weng, Mingliang Zhu, Fuzhen Xuan

Effect of hydrogen on tensile and fatigue properties of copper-based cast alloy

Ren Yoshimoto, Kojiro Fujiyama, Takafumi Yano, Hirotoshi Enoki, Takashi Iijima, Junichiro Yamabe

EFFECT OF PRECIPITATION HAREDENING ON THE FATIGUE LIMIT OF A BERYLLIUM COPPER ALLOY

TAKUMA KAWAHARA, YUYA TANAKA, MASAHIRO ENDO

EFFECT OF TEMPERATURE ON THE TOUGHNESS OF BILAYER ABS/15% PMMA COMPOSITE SHEETS

Abdelwahab KHLEDJ, Mohamed HADJ MILOUD, Mohammed MENDAS, Pavol HVIZDOŠ, Ibrahim ZIDANE, Richard SEDLÁK

Evaluation of Bonding Strength of Epoxy Adhesive Joints with Weak Bonding Using Laser Shock-wave Adhesion Tests (LaSAT)

Risa Noda, Yuto Kasuya, Aoi Takagi, Yuichi Hosoya, Akio Yonezu

Evaluation of Hydrogen Compatibility of Cr-Mo Steel by the Continuous Hydrogen Charging Test

Kosuke Toyota, Takashi Matsuo

Evaluation of Interfacial Bonding Strength of CFRP/Epoxy Resin Adhesive Using Laser Shock-Wave Adhesion Test

Yuto Kasuya, Aoi Takagi, Yuichi Hosoya, Cong Lee, Akio Yonezu

EXPERIMENTAL DETERMINATION AND NUMERICAL VALIDATION OF THE FATIGUE GROWTH RATE OF A LOW CARBON MICROALLOYED STEEL

Bojana Zecevic, Ana Maksimović, Ljubica Milović, Vujadin Aleksic, Srdjan Bulatovic

FAILURE ANALYSIS FOR A HYPOCYCLOID-TYPE CRACK WITHIN A THERMO-ELASTIC MATERIAL

Yi-Lun Liao, Chien-Ching Ma, Ching-Kong Chao

FATIGUE PROPERTIES OF A NOVEL CAST QUASICRYSTAL ALUMINUM ALLOY

Mirjam Bajt Leban, Tadeja Kosec, Blaž Leskovar

Fatigue properties of prestrained metastable austenitic stainless steels in presence of hydrogen

Kento Hashiguchi, Junichiro Yamabe

Features of the microdefects formation in geomaterials when exposed to high-power nanosecond electromagnetic pulses

Igor Bunin, Alexey Kochanov

Finite element simulation of frost heaving induced cracking in rock-like materials using a phase field approach

Quy Minh VUONG, Minh Quan THAI, Yann CHARLES, Jia LI

Fracture behaviour prediction of an historical bridge steel elements using machine learning models

Dorin Radu, Aman Kumar, Aleksandar Sedmak, Simon Sedmak, Mihajlo Arandjelovic

FRACTURE MODELING AND EXPERIMENTAL STUDY ON INTERFACIAL ADHESION IN A THERMAL BARRIER COATING SYSTEM ON NI-BASED SUPERALLOYS

Elena FEDOROVA, Andrey BUROV, Egor MOSKVICHEV, Nadejda SUKHODOEVA

Fracture toughness of shot peened 6060 T6 aluminium alloy

Erik Calvo-García, Óscar Barro, Pablo Pou-Álvarez, Aida Badaoui, Daniel Wallerstein, Antonio Riveiro, Rafael Comesaña

FULL FIELD J-INTEGRALS BY DIGITAL IMAGE CORRELATION

Antti Forsström, Bruno Goncalves

HYDROGEN EMBRITTLEMENT OF AISI 420 STEEL: CONVENTIONAL VS. ADDITIVELY MANUFACTURED

Bojan Zajec, Mirjam Bajt Leban, Andraž Legat, Bojan Podgornik, Frantz Martin

Hydrogen-Induced Ductility Losses of Additively Manufactured 17-4 PH Steels with Internal Hydrogen

Soma Kato, Kazuyuki Morishita, Kentaro Wada, Junichiro Yamabe

IDENTIFICATION BY INVERSE ANALYSIS OF COUPLED HARDENING LAW AND GTN DAMAGE MODEL PARAMETERS OF A COLD ROLLED STEEL

Abdelilah BOURAGBA, Ibrahim ZIDANE, Mohamed HADJ MILOUD, Mohamed MENDAS

IDENTIFYING A STRENGTHENING CONTRIBUTION VOID IN POROUS CERAMIC

Zhaoxiu Jiang, Yonggang Wang

INFLUENCE OF TEMPERATURE AND SPECIMEN ORIENTATION ON THE IMPACT TOUGHNESS OF MICROALLOYED STEEL

Ana Maksimović, Bojana Zečević, Ljubica Milivović, Vujadin Aleksić

Influence of vanadium content on the microstructure, mechanical and electrochemical properties of carbides in Cr-Mo steel

Aleksandar Todić, Milan T. Djordjević, Dušan Arsić, Ružica Nikolić, Djordje Ivković, Dragan Cvetković

INVESTIGATION OF PHYSICOCHEMICAL PROPERTIES OF CHITOSAN BIOPOLYMER FILMS CONTAINING TEA TREE (MELALEUCA ALTERNIFOLIA) OR THYME (THYMUS VULGARIS) ESSENTIAL OIL

Krastena Todorova Nikolova, Gabor Zsivanovits, Maria Marudova, Alexander Pashev, Sofia Milenkova, Anelia Gerasimova

MICRO-MECHANICAL CHARACTERISATION OF HYDROGEN-ENHANCED FATIGUE CRACK GROWTH IN HIGH-CARBON CHROMIUM BEARING STEEL

Kurumi Kwaguchi, Yoji Mine, Kwangsik Kwak, Masahide Natori, Hiroki Komata

MICROSTRUCTURAL FATIGUE CRACK GROWTH IN SINGLE COLONY OF TI-6AL-4V LAMELLER ALLOY

Yoji Mine, Shohei Ueki, Yu-Lung Chiu, Paul Bowen, Kazuki Takashima

NUMERICAL ANALYSIS OF A PARTIAL HIP IMPLANT FATIGUE BEHAVIOUR

Katarina Čolić, Simon Sedmak, Aleksandar Sedmak, Aleksandar Grbović

NUMERICAL ANALYSIS OF A TRANSPORTATION PIPELINE SYSTEM STRUCTURAL INTEGRITY

Katarina Čolić, Simon Sedmak, Aleksandar Sedmak, Aleksandar Grbović

PHOTOPOLYMERIZATION 3D PRINTING OF 17-4PH /ZRO2 COMPOSITE STRUCTURE

Enkhtsolmon Choijilsuren, Jeong Seon Im, Minsoo Park

Relationship between defects and fatigue limit of cast aluminum alloy

Shohei Matsuda, Kota Takamatsu, Tohru Hashimoto, Takashi Matsuo, Masahiro Endo

Root Cause Failure Analysis of a 9Cr-1Mo tube in the CCR Unit of a Refinery

Reza Khadem Hosseini

STRESS STATE DEPENDENT PHASE FIELD MODELING OF DUCTILE FRACTURE

Iremnaz Yücel, Can Erdogan, Tuncay Yalçinkaya

Study of the performance of a radial turbine operating with butane

Reda Belhouari, Mohamed Hammel

Surface Treatment of Thin Metallic Plate using Laser Induced Particle Impact Test (LIPIT)

Ryo Ichikawa, Miki Kajihara, Hiroto Suzuki, Tatsuya Amamiya, Aoi Takagi, Akio Yonezu

THE EFFECT OF CONSTRAINT ON THE T0 REFERENCE TEMPERATURE OF A533B C1 PRESSURE VESSEL STEEL ASSESSED WITH SMALL-SCALE SE(T) AND SE(B) SPECIMENS

Timo Petteri Veijola

THE EFFECT OF HEATH TREATMENT OF HIGH STRENGTH STEEL ON DYNAMIC STRENGTH OF HOWITZER CANNON BARREL

Gašper Fašun, Nenad Gubeljak, Jožef Predan, Mirco D. Chapetti

THE EFFECT OF HELICAL DIAMETER AND OVALITY ON COLLAPSE PRESSURE OF HELICAL-SHAPED TUBE SUBJECTED TO EXTERNAL PRESSURE

GyoGeun Youn, MyeongWoo Lee, KwangHyun Ahn, Moonsu Park

The effect of mean shear stress on torsional low-cycle fatigue life of notched AISI 4340 and 300M steels

Marian Patrick, Jeremy Laliberté, Xin Wang

The Effect of Porosity on the Experimental Fracture Toughness of Cementitious Materials

Anne Zora Gierth, Tommy Mielke, Doru C. Lupascu

THE EFFECT OF RECYCLED STEEL FIBERS ON THE FRACTURE RESISTANCE OF CEMENT MORTARS

Zachary Charles Grasley, Xijun Shi

THE EFFECT OF THE TRANSITION FRACTURE TEMPERATURE DEPENDENCE MODEL ON THE CONSERVATISM OF THE REFERENCE TEMPERATURE, T0

Kamila Karolina Nowosad, Eleanor Stillman, Daniel Cogswell

The investigation into the mechanism of hydrogen embrittlement of ferritic spheroidal graphite cast iron using porous carbon steel

Yudai Kuga, Takashi Matsuo

THE MECHANICAL PROPERTIES OF X70 STEEL PRE-CHARGED IN BLEND OF HYDROGEN AND METHAN

Jan Kec, Lukáš Jeníček, Jakub Jindra, Miloslav Poupa

THE STORY BEHIND THE BEGINNINGS OF LINEAR ELASTIC FRACTURE MECHANICS (LEFM)

Ivana Cvetkovic, Radica Prokic Cvetkovic, Olivera Popovic, Marina Dojcinovic

UNDERSTANDING OF RELATIONSHIP BETWEEN FRACTURE AND SLIP BEHAVIOUR IN PERMENDUR ALLOYS USING MULTISCALE MECHANICAL TESTING OF POLY- AND SINGLE-CRYSTALLINE SPECIMENS

Yuki Tampa, Yoji Mine, Daiki Kato, Motoki Ohta

VERIFICATION OF DIGITAL TWINS TO PREDICT MATERIAL FAILURE IN REAL SITUATION

Milos Milosevic, Isaak Trajkovic, Nenead Mitrovic, Ivana Jevtic, Dragica Manojlovic, Jelena Sakovic Jovanovic

Verification of digital twins to predict material failure in real situations

Miloš S Milosevic, Isaak Trajkovic, Nenad Mitrovic, Ivana Jevtic, Dragica Manojlovic

An innovative solution for determining stress intensity factors (SIF) using the GMDH neural network

Morteza Khomami Abadi, Mohammad Zaman Kabir, Kamran Nikbin

Crack Identification Based on Dynamic Brittle Fracture Initiation Energy in Steel Specimens Using an Improved Artificial Neural Network

Abdelmoumin Oulad Brahim

FAILURE ASSESMENT THROUGH VARIOUS UNCOUPLED DAMAGE MODELS IN FLOW FORMING PROCESSES

Tuncay Yalcinkaya, Hande Vural, Tevfik Ozan Fenercioglu

COMPARATIVE NUMERICAL ANALYSIS OF GAP AND OVERLAP EFFECTS ON MECHANICAL PROPERTIES OF VARIABLE STIFFNESS COMPOSITES

Gul Demirer, Altan Kayran

FRACTURE BEHAVIORS OF FIBER-REINFORCED COMPOSITE BASED ON CLAMPED SINGLE EDGE NOTCHED TENSILE SPECIMEN

Xu Chen, Jinghui Wang, Zheng Liu

DWELL FATIGUE DAMAGE ANALYSIS IN TITANIUM ALLOYS USING CRYSTAL PLASTICITY AND PHASE FIELD FRAMEWORKS

Orhun Bulut, Tuncay Yalçinkaya

COMPARATIVE ANALYSIS OF HYDROGEN CHARGING METHODS AND THEIR IMPACT ON THE MECHANICAL PROPERTIES AND TRAPPING CAPACITY OF AN X70 PIPELINE STEEL

Ismael Fernando Izquierdo Torres, Lisa Claeys, Margo Cauwels, Kim Verbeken, Tom Depover

Influence of grain size and secondary phases on the hydrogen embrittlement sensitivity of Al8(CoCrFeNi)92 high entropy alloy

Lisa Claeys, Kateryna Ulybkina, Kateryna Kamyshnykova, Kim Verbeken, Tom Depover

STRUCTURAL INTEGRITY ASSESSMENT OF OIL STORAGE TANK: NON-DESTRUCTIVE APPROACH ACCORDING TO API CRITERIA

Lazar Jeremic, Branislav Djordjevic, Igor Martic, Aleksandar Sedmak, Aleksandar Jovanovic, Ana Petrovic