Structural integrity assessment of a lightweight bicycle frame: Finite element analysis and experimental testing

Emanuele Vincenzo Arcieri, Sergio Baragetti

FRACTURE STRESS TRIAXIALITY OF Ti-6Al-4V FOR COMPUTATIONAL DESIGN OF DAMAGE TOLERANT AERO ENGINES

Carlos Alberto Beecher Cotal, Sunny Narayan, Laurent Duchêne, Carlos Medina, Víctor Tuninetti

Influence of the impact speed on the damage of a 7075-T6 hourglass specimen: A finite element study

Emanuele Vincenzo Arcieri, Sergio Baragetti, Zeljko Bozic

INFLUENCE OF PRIOR CORROSION ON THE FATIGUE BEHAVIOR IN A SIMULATED RECYCLED 6082 AL-ALLOY

Aritra Sarkar, Simen Ulleberg Tråstadkjølen, Håvard Wilson, Bård Nyhus, Nima Razavi

Enhancement of Mechanical Properties of high-Mn TWIP Steel with Fast Heating process: Insights into Microstructural Evolution and Performance Optimization

Atef Saad Hamada Saleh, Ali Khosravifard, Matias Jaskari, Antti Järvenpää

IMPACT OF STRAIN RATE-DEPENDENT MATERIAL MODELS ON CRASHWORTHINESS SIMULATIONS BY USING LS-DYNA

Elif Ezgi Aytimur

Boundary element method for 3D fracture mechanics analysis in quasicrystal solids under thermal loading

Roman Kushnir, Heorhiy Sulym, Iaroslav Pasternak

ON ANALYTICAL MODEL OF INTERFACE CRACK IN BONDING QUASI-BRITTLE MATERIAL BETWEEN DISTINCT ELASTIC MEDIA

Mykhailo Dudyk, Anatoly Kaminsky, Yuliia Reshitnyk, Yuri Chornoivan

FREE VIBRATION ANALYSIS OF CRACKED CYLINDRICAL SHELL

Oleksii Ishchenko, Yaroslav Dubyk

MODELING OF HYSTERESIS IN SHAPE MEMORY ALLOYS USING ARTIFICIAL NEURAL NETWORK

Oleh Yasniy, Dmytro Tymoshchuk, Iryna Didych, Volodymyr Iasnii, Iaroslav Pasternak

MOLECULAR DYNAMIC SIMULATION OF THE TEMPERATURE EFFECT ON STRENGTH OF CARBYNE-GRAPHENE NANOELEMENTS

Sergiy Kotrechko, Oleksandr Ovsjannikov, Mykhailo Barvinko, Nataliya Stetsenko

Modelling the Evolution of Fracture Process Zone Considering Strain Rate Effect

Nhan Thanh Nguyen, Dat Gia Phan, Murat Karakus, Ha Hong Bui, Giang Dinh Nguyen

THE EFFECT OF HYDROGEN ADSORPTION ON Ti2AlV (110) SURFACE: FIRST PRINCIPLE DENSITY FUNCTIOANAL THEORY

David Magolego Tshwane, Mysore Sridhar Santosh, Regina Rapela Maphanga

Restoration of steel properties after long-term operation at bends of TPP steam pipelines by heat treatment

Halyna Krechkovska, Ivan Tsybailo, Oleksandra Student, Lesya Svirska, Sergiy Korniy

THE EFFECT OF IN-SERVICE DEGRADATION OF X52 GAS PIPE STEEL ON FRACTURE TOUGHNESS OF HYDROGENATED SPECIMENS EVALUATED BY THE J-INTEGRAL METHOD

Hryhoriy Nykyforchyn, Oleksandr Tsyrulnyk, Halyna Krechkovska, Myroslava Hredil, Oleh Venhryniuk

Numerical assessment of cold crack susceptibility of X65 pipe steel during in-service repair welding of pipeline in transportation of gas-hydrogen blends

Oleksii Milenin, Olena Velykoivanenko, Galyna Rozynka, Nina Pivtorak

ENHANCING THE INTEGRITY OF A PIPING SYSTEM SUBJECTED TO LONG-TERM OPERATION AT HIGH-TEMPERATURE IN THE CREEP RANGE

Hyeong-Yeon LEE, Ki-Ean NAM, Seung-Woo HA, Min-Su YOON

Fracture mechanical material parameters for the assessment of existing welded railway bridges

Dorina Siebert, Christina Radlbeck, Martin Mensinger

Strain rate dependence measurement method based on ball impact and indentation tests

Kiyohiro Ito, Yuji Ichikawa

STRENGTH AND ENERGETIC OPTIMIZATION OF DUAL-ADHESIVE T-JOINTS

Pedro Miguel Carvalho, Raul Duarte Campilho, Ricardo Jorge Rocha, Kouider Madani

THE MODE III CRACK PROBLEMS FOR MULTI-MODULAR MATERIALS

Evgeny Victorovich Lomakin, Olesia Pavlovna Korolkova

STRESS ANALYSIS OF AXISYMMETRIC INTERFACE CRACKS WITH BRIDGED AND DAMAGED ZONES

Mikhail Perelmuter

ANALYSIS OF CAVITATION IN HUMAN ILIAC ARTERIAL TISSUE

Jaynandan Kumar, Anshul Faye

MODELLING MIXED MODE AND SURFACE CRACKS PROPAGATION USING DIFFERENT PHASE FIELD FORMULATIONS

Dmitry Kosov, Andrey Tumanov, Valery Shlyannikov

MATERIAL RESPONSES AND DIGITAL PROCESSING OF PDV SIGNALS AT LOW VELOCITY IMPACT

Aleksandra Denisovna Yurina, Sergey Vitalievich Uvarov, Oleg Borisovich Naimark

GAPPED MOMENTUM STATES AND BLOW-UP DAMAGE KINETICS AS MECHANISM OF DUCTILE FAILURE UNDER INTENSIVE LOADING

Nikita Knyazev, Aleksandr Nikitiuk, Oleg Naimark

Analysis of plastic behavior and residual stresses in additively manufactured stainless steel

Alexey Fedorenko, Fedulov Boris, Lomakin Evgeny

FATIGUE CRACK ORIGINATION AND GROWTH MECHANISMS FOR TI-6AL-4MO ALLOY UNDER VARIABLE AMPLITUDE LOADING IN VHCF REGIME

Andrey Shanyavskiy, Aleksandr Nikitin, Iliya Nikitin

PRODUCTION OF ALUMINUM CELLULAR SOLIDS, MECHANICAL CHARACTERIZATION THROUGH COMPRESSION TESTS AND CORRELATION WITH IMAGE ANALYSIS

Alessandra Ceci, Girolamo Costanza, Christian Iandiorio, Emanuele Marotta, Pietro Salvini, Maria Elisa Tata

Effect of different process conditions and post-process treatments on residual stress and fatigue behavior of the AlSi10Mg PBF-LB alloy

Lavinia Tonelli, Gianluca Di Egidio, Alessandro Morri, Lorella Ceschini

Modeling of contact fatigue wear in rough elastic contact

Anastasiya Yakovenko, Irina Goryacheva

Assessment of Fatigue Life Under Three-Point Bending: Comparing S-D-S-ER and D-S-ER Techniques

Ibrahim Talha TEKE, Ahmet Hanifi ERTAS

FRACTURE TOUGHNESS OF ROCK–CONCRETE INTERFACES

E.I. Ushakov, A.S. Voznesenskii

DETERMINATION OF ELASTIC MECHANICAL PROPERTIES OF MATERIALS BASED ON FOUR-POINT BENDING TEST AND STRAIN MEASUREMENT BY FIBER-OPTIC SENSORS

Valerii Matveenko, Andrey Fedorov, Grigorii Serovaev, Elizaveta Galkina

EXPERIMENTAL AND COMPUTATIONAL COMPLEX OF LOW-TEMPERATURE FRACTURE MECHANICS

Vladimir Viktorovich Moskvichev

CRITICAL DYNAMICS OF DEFECT AS MECHANISMS OF MULTISCALE DAMAGE-FAILURE TRANSITION IN WIDE RANGE OF LOAD INTENSITY

Oleg Naimark

CONTROLLED HORIZONTAL AND VERTICAL CUTOFF OF REINFORCED CONCRETE STRUCTURES BY MEANS OF ELECTRIC DISCHARGE IMPULSES

Koji Uenishi, Hiroshi Yamachi, Junichiro Nakamori

Structural studies of composites subjected to dynamic and impact loading by X-ray tomography methods

Yuriy Vitalyevich Bayandin, Mikhail Vladimirovich Bannikov, Aleksandra Denisovna Yurina, Sergey Vitalyevich Uvarov, Oleg Borisovich Naimark

ACCELERATION AND DECELERATION OF UNZIPPING SUPERSHEAR FRACTURE PROPAGATING ALONG A STRAIGHT PERFORATION LINE CONSISTING OF SMALL-SCALE CRACKS

Koji Uenishi, Kaichi Akimoto, Masanao Sekine

THE TWO-PARAMETER FRACTURE CRITERION WITH TWO-DIMENSIONAL CRACK TIP FRONT CONSTRAINT

Yury Matvienko, A.M. Pokrovskii

Role of High Frequency Loads in Hydraulic Units Destruction

Evgeniia Georgievskaia

RESIDUAL STRESS FIELD INVESTIGATION OF NOTCHED TC4 SPECIMENS AFTER LASER SHOCK PEENING

Mariia Bartolomei, Anastasia Iziumova, Aleksei Vshivkov, Elena Gachegova, Oleg Plekhov

FLEXURAL PROPERTIES OF HIGH-STRENGTH CONCRETE WITH VARIABLE COMPOSITION OF SYNTHETIC FIBERS AT ELEVATED TEMPERATURES

Rami Anton Hawileh, Maha Assad, Jamal Abdalla, Ahmed Selim, Abdulrahman Mohamed, Abdulrahman Madkour

THE EFFECT OF ANCHOR’S INCLINATION ANGLE ON THE FLEXURAL ENHANCEMENT OF CFRP-STRENGTHENED RC BEAMS

Maha Assad, Rami Hawileh, Jamal Abdalla

PREDICTION OF THE COMPRESSIVE STRENGTH OF NORMAL CONCRETE WITH VARIABLE PERCENTAGES OF FLY ASH USING MACHINE LEARNING

Hussam Safieh, Rami Hawileh, Sayan Shaw, Jamal Abdalla

INTEGRATING EXPERIMENTAL BOND-SLIP MODELS INTO FINITE ELEMENT MODELLING OF CFRP-STRENGTHENED CONCRETE PRISMS

Aseel Salameh, Rami Hawileh, Maha Assad, Jamal Abdalla

Intrinsic fracture energy of 3D printed cement mortar obtained from snapback be-haviour in indirect tensile testing

Zili Huang, Giang D Nguyen, Murat Karakus, Tran Thanh Tung, Ha Hong Bui

MECHANICAL PERFORMANCE OF SUSTAINABLE PE-ECC USING GGBS AND DUNE SANDS

Eyad Magdy Shahin, Jamal El-Din Abdalla, Rami Hawileh

FAILURE CRITERION FOR THREAD-LIKE FIBERS IN THERMOELASTIC MEDIUM

Oleh Yasniy, Andrii Korniichuk, Iryna Didych, Dmytro Tymoshchuk, Iaroslav Pasternak

MECHANICAL CHARACTERIZATION OF NYLON CF PRINTED BY FDM PROCESS USING ENERGY METHODS

Danilo D'Andrea, Giacomo Risitano, Pasqualino Corigliano, Dario Santonocito, Davide D'Andrea

COMPARISON OF GLOBAL AND LOCAL METHODS FOR EVALUATION OF THE MODE I ENERGY RELEASE RATE IN MULTI-DIRECTIONAL COMPOSITE DCB SPECIMENS SUBJECTED TO CYCLIC LOADING

Mor Mega, Roy Amkies, Yitzhak Hay Magrafta, Mike van der Panne, John-Alan Pascoe

The hybridization effect on the mechanical and piezoresistive behavior of epoxy nanocomposites

João Miguel Parente, Abilio silva, Paulo Reis

ENHANCING CRACK RESISTANCE AND STRENGTH OF RECYCLED AGGREGATE CONCRETE WITH END-OF-LIFE TIRE STEEL FIBERS

Asad Zia, Ivan Holly, Jaroslav Prokop

Effects of Residual Stress on the Compressive Strengths of Thermally Strengthened Glass Spheres

Fenghua ZHOU, Jia ZHANG, Yulong Li, Yuxuan ZHENG

MULTI-SCALE RESIDUAL STRESS EVALUATION IN LASER-WELDED EUROFER97 STEEL FOR FUSION PLANT

Tan Sui

3D BULK RESIDUAL STRAIN EVALUATION USING NEUTRON BRAGG EDGE IMAGING STRAIN TOMOGRAPHY IN LASER-WELDED EUROFER97 STEEL FOR FUSION POWER PLANT

Bin Zhu, Nathanael Leung, Winfried Kockelmann, Andrew London, Michael Gorley, Mark Whiting, Yiqiang Wang, Tan Sui

DEVELOPING A MACHINE LEARNING MODEL FOR PREDCTING THE CREEP RESPONSE IN SIMILAR FUSION REACTOR JOINTS

Brandon Steel, Bin Zhu, Tan Sui, Hannah Zhang, Yiqiang Wang

THE EFFECT OF HIGH HEAT FLUEXES ON THE MICRORESIDUAL STRESS DISTRIBUTION FOR W ARMOUR USED IN FUSION REACTORS

Omar Mohamed, Bin Zhu, David England, Yiqiang Wang, Mark Whiting, Jeong-Ha You, Tan Sui

DEVELOPING CHARACTERISATION TECHNIQUES FOR ANALYSING RESIDUAL STRESS IN DISSIMILAR FUSION REACTORS JOINTS

David England, Bin Zhu, Hannah Zhang, David Cox, Tristan Calvet, Catrin M. Davies, Mark J. Whiting, Yiqiang Wang, Tan Sui

An analysis of frequency effect in fatigue data of metal alloys with different crystal structures

Rita Dantas, Vítor Gomes, Michael Gouveia, Filipe G. A. Silva, José Correia, Grzegorz Lesiuk, Abílio de Jesus

THE FRACTOGRAPHY OF HYDROGEN EMBRITTLED AND BASELINE AA2198-T8 AND AA2024-T3 SHEET, INCLUDING PRE-STRETCHING EFFECTS

Roelof Johannes Mostert, C.C.E. Pretorius, Margarita Christina Charalampidou, Nikolaos Alexopoulos

COMPUTATIONAL WELDING MECHANICS BASED APPROACH FOR THE OPTIMIZATION OF PROCESS PARAMETERS IN LASER WELDING OF IN792 NICKEL BASE ALLOY

Paolo Ferro, Alessandra Varone, Giuliano Angella, Francesco Cognini, Giuseppe Barbieri, Roberto Montanari, Filippo Berto, Franco Bonollo

THE BRITTLE FRACTURE OF BODIES WITH PARTIALLY HEALED SURFACE CRACKS

Ivan Shatskyi, Vasyl Perepichka, Taras Dalyak

PROPOSAL ECO-FRIENDLY IN-HOUSE INHIBITOR FOR MITIGATING CORROSION IN THE ALGERIAN OIL AND GAS INDUSTRY: ELECTROCHEMICAL ANALYSIS, SURFACE MORPHOLOGY AND MECHANICAL PROPERTIES

Mohammed hadj meliani, mouna amara, hadjer didouh, fz khedim, azedine belalia, guy pluvinage

Fatigue limit assessment of interacting small defects by cyclic R-curve analysis

Stefan Fladischer, Michael Stoschka, Florian Grün

Unveiling B-FADE: Bayesian-FAtigue moDel Estimator. Overview of the Software Package and its Application to the Probabilistic Evaluation of El Haddad Curves

Alessandro Tognan, Enrico Salvati

Comparative Analysis of High-Cycle Fatigue Behavior and Failure Mechanisms in Ultrahigh-Strength CrNiMoWMnV Steels

Atef Saad Hamada, Mohammed Ali, Sumit Ghosh, Matias Jaskari, Tarek Allam, Ruth Schwaiger, Mamdouh Eissa, Taha Mattar

Fatigue life assessment of cold-formed ultra-high strength steel sections

Okan Yılmaz, Dennis Van Hoecke

Fatigue behaviour of LPBF-produced M789 martensitic steel

Kashim Ohinoyi Sanni, Myriam Brochu, Matteo Cova

A new threshlod model for physically small crack and long crack based on CTOD

Lindong Chai, Han Lu, Yihai He, Wei Zhang

IMPORTANCE OF WELDED JOINT CHARACTERIZATION IN CONSTRUCTION DESIGNING

Ana Petrović, Nikola Momčilović, Branislav Đorđević, Mihajlo Aranđelović, Simon Sedmak, Vesna Milošević-Mitić, Nina Anđelić

MEAN STRESS EFFECT AND FATIGUE CRACK GROWTH RATE DESCRIPTION IN S355 GRADE STEEL

Grzegorz Lesiuk

A NEW CONCEPT FOR LARGE-SCALE PRESSURE SYSTEMS STRUCTURAL INTEGRITY

Tamás Fekete

A SYSTEMATIC REVIEW OF GLOW WIRE TEST PERFORMANCE: EVALUATING POLYMER CHARACTERISTICS AND ADDITIVE EFFECTS ON FIRE RESISTANCE

Anandito Adam Pratama, Aditya Rio Prabowo, Teguh Muttaqie, Himma Firdaus, Nanang Kusnandar, Ihsan Supono, Iput Kasiyanto, Qudsiyyatul Lailiyah

RISK BASED ASSESSMENT OF STRUCTURAL INTEGRITY – A CASE STUDY

Aleksandar Sedmak, Simon Sedmak, Snеžana Kirin, Mirjana Opačić, Tamara Golubović

THE SELF-HEATING EFFECT ON HYBRID COMPOSITES

Paulo Nobre Balbis Reis, Andrzej Katunin, Dominik Wachla

THE EFFECT OF FIBER WAVINESS ON THE STIFFNESS OF A POLYMER COMPOSITE MATERIAL

Boris Fedulov, Daria Bondarchuk, Evgenii Lomakin

INTERLAMINAR FRACTURE PROPERTIES OF FLAX FIBRE BIOBASED COMPOSITES INTERLEAVED WITH PPS VEILS

Robert Lowe, Vishnu Prasad, Petar Cosic, Neal Murphy, Alojz Ivankovic

Fatigue strength of laminated bamboo lumber under tensile loading

Pascal Franck, Oliver Bletz-Mühldorfer, Leander Bathon, Ronja Scholz, Frank Walther

ANALYSIS OF L-SHAPED FUNCTIONALLY GRADED VISCOELASTIC SHAFTS WITH LONGITUDINAL CRACK UNDER TORSION

Victor Iliev Rizov

DELAMINATION ANALYSIS OF A FIXED-ENDED MULTILAYERED BEAM UNDER TWISTED SUPPORT

Victor Iliev Rizov