Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
 
Session Overview
Location: HALL Vatra (Hall 4)
Date: Monday, 26/Aug/2024
11:00am
-
12:45pm		 DMM: Damage mechanics
Location: HALL Vatra (Hall 4)
Chair: Lucien Laiarinandrasana
 
11:00am - 11:15am

Comparing Direct Method and Backpropagation method in Determining GTN Parame-ters: A Quantitative Study

Yassine CHAHBOUB


11:15am - 11:30am

INTEGRATED STUDY ON Cr2AlC-COATED ZIRCONIUM FOR ACCIDENT-TOLERANT FUEL SYSTEMS

Boyu Pan, Fuhui Shen, Markus Könemann, Sebastian Münstermann


11:30am - 11:45am

LOAD PATH-DEPENDENT FATIGUE CAPABILITY OF FORWARD ROD- EXTRUDED CASE HARDENING STEEL 16MnCrS5

Lars Andree Lingnau, Lukas Maximilian Sauer, Frank Walther


11:45am - 12:00pm

NEW FORMULATED MODEL FOR DUCTILE DAMAGE ANALYSIS AND ITS COMPARISON TO GTN MODEL

Saurabh Dixit, Sachit Anand, Abhishek Tiwari


12:00pm - 12:15pm

THE INFLUENCE OF THE HARDENING BEHAVIOR ON THE STRESS STATE AND DAMAGE EVOLUTION IN BACKWARD FLOW FORMING PROCESSES

Hande Vural, Tevfik Ozan Fenercioğlu, Tuncay Yalçinkaya
2:00pm
-
3:45pm		 FFW: Fretting fatigue and wear
Location: HALL Vatra (Hall 4)
Chair: Goran Vukelić
 
2:00pm - 2:15pm

THE EFFECT OF SURFACE MODIFICATION ON FRETTING WEAR OF STEEL FOR ENGINE APPLICATION

Auezhan Amanov, Ali Usman, Reijo Kouhia, Minnamari Vippola


2:15pm - 2:30pm

FAR FIELD TENSION TO ADVANCE A FRETTING FATIGUE CRACK UNDER THE SHARP AND ROUNDED EDGE CONTACTS

Hyung-Kyu Kim


2:30pm - 2:45pm

INVESTIGATION OF MICROSTRUCTURAL INFLUENCE ON GEAR CONTACT FATIGUE

Sicong Ren, Abhishek Biswas, Luis Vallejo-Rodriquez, Tom Anderson, Helena Ronkainen, Matti Lindroos, Anssi Laukkanen


2:45pm - 3:00pm

Application of Self-Heating Method to Estimate Fatigue Limit of 42CrMo4+QT Steel under Fretting Fatigue Conditions

Martin Nesládek, Martin Matušů, Jan Papuga


3:00pm - 3:15pm

Non-local crack initiation criteria and lifetime prediction in fretting-fatigue under variable normal loading conditions

Naansonou Patrick Lare, Florian Meray, Kevin Cosseron, Yoann Guilhem, Sylvie Pommier
4:30pm
-
6:00pm		 MCM: Models, criteria and methods in fracture mechanics
Location: HALL Vatra (Hall 4)
Chair: Aleksandar Sedmak
Chair: Shengwen Tu
 
4:30pm - 4:45pm

INTERACTING CRACKS MODELING IN MATERIAL POINT METHOD

Yamina Emma AIMENE


4:45pm - 5:00pm

INFLUENCE OF VOLUMETRIC LOCKING ON THE COMBINATION OF PLASTICITY AND PHASE FIELD MODELS FOR FRACTURE

Pablo Olivares Rodríguez, Adrià Quintanas Corominas, Israel García García, Jose Reinoso Cuevas, Emilio Martínez Pañeda


5:00pm - 5:15pm

DIGITAL TWIN-BASED SIMULATIONS FOR THE EVALUATION OF SMALL-SCALE TENSILE SPECIMEN TESTS

Tamás Fekete, Dániel Antók, Levente Tatár, Péter Bereczki


5:15pm - 5:30pm

MACHINE LEANING-BASED SEGMENTATION OF QUASI-BRITTLE FRACTURES IN 316L STAINLESS STEEL

Amine Haboub, Jonas Da Silva, Tariq Mohammad, Hanan Farhat


5:30pm - 5:45pm

Experimental and numerical studies on shear band formation at high strain rates

Stefan Jentzsch, Daniel Stock, Ralf Häcker, Birgit Skrotzki, Reza Darvishi Kamachali, Dietmar Klingbeil, Vitaliy Kindrachuk


5:45pm - 6:00pm

Sensitivity Analysis of Spent Nuclear Fuel Casks according to Boundary Conditions and Parameters of Aircraft Engine Crash Analysis

SeokWoo Kim, Jonsung Kim, Seokpyo Hong, DongJun Kim
Date: Tuesday, 27/Aug/2024
11:00am
-
12:45pm		 CRR.1: Corrosion fatigue 1
Location: HALL Vatra (Hall 4)
Chair: Sara Bagherifard
 
11:00am - 11:15am

Microstructural Insights into Effects of Pressurized Water Reactor Environment and Cyclic Loading Parameters on the Low Cycle Fatigue Behavior of 316L Stainless Steel

Zaiqing Que, Aleks Vainionpää, Tommi Seppänen


11:15am - 11:30am

THE EFFECT OF ALTERNATING WET-DRY CONDITIONS IN THE FATIGUE LIFE OF S355G10+M STEEL UNDER CORROSION-FATIGUE TESTING

Mario Álvarez, Ane Vergara, Mikel Escalero, Mireia Olave


11:30am - 11:45am

FATIGUE PREDICTION OF CORRODED HIGH-STRENGTH STEEL STRANDS USING MACHINE LEARNING MODELS

Peng Jiao WANG, Ka Fai Yuen, Kwok Fai Chung


11:45am - 12:00pm

CHARACTERIZATION AND EARLY DETECTION OF HYDROGEN EMBRITTLEMENT IN OFFSHORE BOLTS USING ACOUSTIC EMISSION

Nokhaiz Sabir
2:00pm
-
3:45pm		 CRR.2: Corrosion fatigue 2
Location: HALL Vatra (Hall 4)
Chair: Jianying He
 
2:00pm - 2:15pm

Effect of hot corrosion on fatigue behavior of superalloy IN718

Girija Shankar Mahobia


2:15pm - 2:30pm

Present knowledge and future perspectives of crack propagation in corrosion fatigue of structural steels - a critical review

Carlos Filipe Correia Rebelo, Bruno Alexandre Silva Pedrosa, José António Fonseca de Oliveira Correia


2:30pm - 2:45pm

CORROSION FATIGUE CRACK TIP pH ESTIMATION OF 13CR-4NI MARTENSITIC STAINLESS STEEL

Aidin Barabi, Pierre-Antony Deschênes, Robert Lacasse, Denis Thibault, Michel Trudeau, Myriam Brochu
4:30pm
-
6:00pm		 STI: Structural integrity
Location: HALL Vatra (Hall 4)
Chair: Emanuele Vincenzo Arcieri
 
4:30pm - 4:45pm

INVESTIGATION OF METHODS FOR ESTIMATION OF FATIGUE PARAMETERS AND BEHAVIOR OF ALUMINUM AND TITANIUM ALLOYS

Robert Basan, Tea Marohnić, Ela Marković, Željko Božić


4:45pm - 5:00pm

MULTIAXIAL THERMOMECHANICAL FATIGUE BEHAVIOR OF 316LN STAINLESS STEEL

Jingyu Yang, Bingbing Li, Xu Chen


5:00pm - 5:15pm

FRACTURE TOUGHNESS OF LOW- AND MEDIUM-CARBON MARTENSITIC-AUSTENITIC STEELS AND THEIR WELDS

Sakari Pallaspuro, Sebastian Lindqvist, Ann-Christin Hesse, Tamás Tóth, Johannes Sainio, Niko Aho, Sumit Ghosh, Jukka Kömi


5:15pm - 5:30pm

MORSE-CODE INSPIRED ARCHITECTURE TO IMPROVE DAMAGE RESISTANCE OF 3D PRINTED PLA AND BRITTLE PMMA

Deepesh Yadav, BN Jaya


5:30pm - 5:45pm

DIGITAL TWIN FOR THE PREDICTION OF WEAR IN GEAR-BASED TRANSMISSIONS OF WIND TURBINES

Maite García, Mikel Escalero, Alfonso Fernández del Rincón
Date: Wednesday, 28/Aug/2024
11:00am
-
12:45pm		 CPT.1: Composites 1
Location: HALL Vatra (Hall 4)
Chair: Otmar Kolednik
 
11:00am - 11:15am

FRACTURE ANALYSIS OF STIFFENED LAMINATED COMPOSITE PLATES

C.W. Hsu, C. Mittelstedt, Chyanbin Hwu


11:15am - 11:30am

INSTRUMENTED END-NOTCHED FLEXURE TESTING TO CHARACTERIZE THE INTERFACE TOUGHNESS OF ENVIRONMENTAL BARRIER COATINGS ON CERAMIC MATRIX COMPOSITES

Thomas VANDELLOS, Jérôme SINISTRO, Vincent HERB


11:30am - 11:45am

Determination of CFRP Intralaminar Fracture Properties in the Calibration of a Non-Local Damage Model for Crash Application

Maria Pia Falaschetti, Francesco Rondina, Johan Birnie Hernandez, Luca Raimondi, Enrico Troiani, Lorenzo Donati


11:45am - 12:00pm

EVALUATION OF DAMAGE BEHAVIOR OF CFRP LAMINATES UNDER STATIC BENDING LOADS USING X-RAY MICRO TOMOGRAPHY

Hideki Tsuruta, Myunghun Woo, Shinya Fukushige, Yohei Sakakibara, Masahiro Takanashi


12:00pm - 12:15pm

Characterization of Temperature-Dependent Debonding Damage in Highly Particle-Filled Thermoplastic Composites (HPFTC)

Kyung Ha Kim, Ilhyun Kim, Seongho Yoon, Byoung-Ho Choi, Sunyoung Lee, Hyunseob Lee
2:00pm
-
3:45pm		 CPT.2: Composites 2
Location: HALL Vatra (Hall 4)
Chair: Maria Pia Falaschetti
 
2:00pm - 2:15pm

INSTRUMENTED INDENTATION BASED METHODS TO ASSESS FRACTURE TOUGHNESS (KIC) OF SELF COMPACTING CONCRETE: INFLUENCE OF WATER TO BINDER (W/B) RATIO AND TYPE OF CONCRETE

Said GRAIRIA, Abdelkrim MAANSAR, Adel SAOUDI, Alex MONTAGNE, Didier CHICOT


2:15pm - 2:30pm

ANALYTICAL AND NUMERICAL STUDY OF FGM SANDWICHES UNDER THE EFFECT OF THERMO-MECHANICAL LOADS

Soufiane Abbas, Hinde Laghfiri


2:30pm - 2:45pm

THE EFFECT OF RESIDUAL STRESSES ON TRANSVERSE CRACKING IN CROSS-PLY COMPOSITE LAMINATES

Israel G. García, Vladislav Mantic


2:45pm - 3:00pm

NON-LINEAR IMPLEMENTATION OF THE MINIMIZATION OF THE TOTAL ENERGY SUBJECTED TO A STRESS CONDTION TO PREDICT MULTIPLE DEBONDS IN THE ILTS TEST

José Luis Guzmán López, Mar Muñoz-Reja Moreno, Luis Távara Mendoza, Vladislav Mantič Lescisin


3:00pm - 3:15pm

DESIGN OF TOUGH INHOMOGENEOUS MATERIALS FOR BIAXIAL LOADING

Drazen Brescakovic, Otmar Kolednik


3:15pm - 3:30pm

NOVEL XPS LIGHTWEIGHT THERMOINSULATING CEMENT MORTAR: EXPERIMENTAL INVESTIGATION OF THE MECHANICAL BEHAVIOUR

Zoi S. Metaxa, Violetta K. Kytinou, Vasilios D. Prokopiou, Adamantis G. Zapris, Eleni Apostolidou, Nikolaos D. Alexopoulos
4:30pm
-
6:00pm		 FTS: Fatigue and fracture testing systems
Location: HALL Vatra (Hall 4)
Chair: Masahiro Endo
 
4:30pm - 4:45pm

A STUDY ON EVALUATION OF NON-PROPORTIONAL MULTIAXIAL LOADING EFFECT ON FATIGUE LIFE UNDER WIDE-RENGED MULTIAXIAL STRESS STATE

Takamoto Itoh, Lei He


4:45pm - 5:00pm

Dislocation multiplication and structures in micro-sized nickel single crystal under low-amplitude cyclic loading

Kota Sugisaka, Masataka Abe, Takashi Sumigawa


5:00pm - 5:15pm

HIGH TEMPERATURE FRACTURE TOUGHNESS TESTS ON P91 STEEL

Arthur Félix Perez, Tristan François Calvet, Yiqiang Wang, Catrin Mair Davies


5:15pm - 5:30pm

ELECTRICAL RESISTANCE-BASED FATIGUE DAMAGE ASSESSMENT OF STEELS

Lukas Maximilian Sauer, Lars Andree Lingnau, Johannes Leon Otto, Frank Walther


5:30pm - 5:45pm

THE EFFECT OF MEAN NORMAL STRESS ON THE FATIGUE BEHAVIOUR OF STRUCTURAL STEELS SUBJECTED TO ULTRASONIC LOADINGS: AN ASSESSMENT OF GOODMAN’S APPROACH WITHIN THE VERY HIGH CYCLE FATIGUE REGIME

Joao Alves Araujo, Tiago Lima Castro, Maria Clara Teixeira, Marcos Venicius Pereira


5:45pm - 6:00pm

A DISCUSSION ON ALTERNATIVE APPROACHES TO CT COUPON BASED K1c DETERMINATION PROVIDING RESULTS COMPARABLE WITH ASTM E 399

Parthasarathy Iyengar, Jon Mardaras, Raul Olmo-Mora, Shwe Soe


6:00pm - 6:15pm

COMMENTARY ON THE USE OF PUBLISHED FATIGUE CURVES AND CONDUCTING CONSTANT DISPLACEMENT KIH FRACTURE MECHANICS TESTING OF METALLIC MATERIALS

Mads Holm, Ditte Bilgrav Bangsgaard, Rian Holdstock
Date: Thursday, 29/Aug/2024
11:00am
-
12:45pm		 NDT+TEM: Nondestructive testing and evaluation + Temperature effect
Location: HALL Vatra (Hall 4)
Chair: Sair Kahraman
Chair: Hugo Mesquita
 
11:00am - 11:15am

PREDICTING THE PENETRATION RATE OF DIAMOND CORE DRILLING USING P-WAVE VELOCITY

Sair Kahraman, Abdalrahim A.M. Malakni


11:15am - 11:30am

In situ 3D analysis for deformation-induced martensitic transformation in metastable austenitic alloy by synchrotron X-ray

Tatsuya Iwano, Osamu Takakuwa, Kyosuke Hirayama, Hiroyuki Toda


11:30am - 11:45am

UAV-BASED THERMOGRAPHIC INSPECTION OF WIND TURBINE BLADES FOR STRUCTURAL INTEGRITY ASSESSMENT

Hugo Mesquita, Pedro J. Sousa, Susana Dias, Tiago Domingues, Paulo J. Tavares, Pedro M. G. P. Moreira


11:45am - 12:00pm

CRACK DETECTION ON HIGH-RESOLUTION IMAGES OF STEEL BRIDGES

Andrii Kompanets, Davide Leonetti, Bert Snijder


12:00pm - 12:15pm

EXTRACTION OF CREEP MATERIAL CONSTANTS FOR MOD.9CR-1MO WELDED JOINTS BY AUTOMATED INDENTATION CREEP TEST

Masao Sakane, Shota Makinose, Kenji Tokuda, Takamoto Itoh, Lei He


12:15pm - 12:30pm

Effect of thermal-expansion mismatch on thermomechanical behaviour of compacted graphite iron

Minghua Cao, Konstantinos Baxevanakis, Vadim Silberschmidt
2:00pm
-
3:45pm		 FAC: Failure analysis and case studies
Location: HALL Vatra (Hall 4)
Chair: Eberhard Kerscher
 
2:00pm - 2:15pm

Fatigue analysis of axisymmetric chiral cellular structures made of 316L stainless steel

Žiga Žnidarič, Nejc Novak, Branko Nečemer, Srečko Glodež


2:15pm - 2:30pm

UNDERSTANDING THE MIXED MODE FRACTURE BEHAVIOUR OF PRESSURELESS SILVER SINTERED JOINTS DESIGNED FOR POWER PACKAGES

Noud P.T. Schoenmakers, Johan P.M. Hoefnagels, Edsger C.P. Smits, Olaf v.d. Sluis


2:30pm - 2:45pm

Evaluating Quasi-Static and Fatigue Performance of AlSi10Mg Sheet-TPMS-Based Lattices: Impact of Scale, Unit Cell Size and Wall Thickness

Zhuo Xu, Aritra Sarkar, Ricardo Branco, Luis Borrego, Sebastian Wronski, Nima Razavi


2:45pm - 3:00pm

Micromechanics Modeling of Ceramic Matrix Composites Considering the Probability of Crack Deflection

Takehiro Shimada, Tsubasa Watanabe
4:30pm
-
6:00pm		 PBF: Physical aspects of brittle fracture
Location: HALL Vatra (Hall 4)
Chair: Jeremie GIRARDOT
Chair: Dov Sherman
 
4:30pm - 4:45pm

MACRO TO MICRO IN FRACTURE: 1. MACROSCALE EXPERIMENTS

Dov Sherman


4:45pm - 5:00pm

MACRO TO MICRO IN FRACTURE: 2. BOND BREAKING MECHANISMS

Dov Sherman


5:00pm - 5:15pm

Yet another dynamic fracture study on PMMA : comparative analysis of local and global toughness and fracture energy measurements.

Vincent FOURNIER, Jeremie GIRARDOT, Jean Benoit KOPP


5:15pm - 5:30pm

BRITTLE FAILURE OF AN 18MND5 STEEL IN THE LOWER PART OF THE TRANSITION CURVE: EFFECT OF GEOMETRY AND TEMPERATURE

Emmanuelle Catel, Anna Dahl, Eric Lorentz, Jacques Besson


5:30pm - 5:45pm

AE BASED LOCAL APPROACH TO SIMULATE TENSILE FRACTURE OF GLASSY POLYMER

SUBRAT SENAPATI, ANURADHA BANERJEE, RAVINDRAN RAJESH


5:45pm - 6:00pm

Effects of heat treatment on fracture toughness and brittle fracture initiation mechanism of quenched and tempered nuclear pressure vessel steel (A508-Grade 3)

Julie Papin, Jean-Baptiste Delattre, Jean Luc Flament, Bernard Marini, Pierre Joly, Jean-Philippe Mathieu, Ludovic Vincent, Anne-Françoise Gourgues-Lorenzon
Date: Friday, 30/Aug/2024
11:00am
-
12:45pm		 PFF: Polymers fatigue and fracture
Location: HALL Vatra (Hall 4)
Chair: Ralf Lach
Chair: Javier Gomez
 
11:00am - 11:15am

MECHANICAL AND FRACTURE MECHANICS INVESTIGATIONS OF UNI-DIRECTIONALLY FIBRE-REINFORCED THERMOPLASTIC POLYMER TAPES

Ralf Lach, Stefanie Celevics, Ivonne Jahn, Marianne John, Nico Teuscher, Benjamin Tillner, Beate Langer, Wolfgang Grellmann


11:15am - 11:30am

BAYESIAN ANALYSIS OF FRACTURE OF POLYAMIDE 12 U-NOTCHED SPECIMENS

Javier Gomez, Teresa Gómez-del-Rio, Jesús Rodríguez


11:30am - 11:45am

INFLUENCE OF FDM PRINTING PARAMETERS ON THE COMPRESSIVE MECHANICAL PROPERTIES AND FRACTURE BEHAVIOR OF ABS MATERIAL

Marko Delić, Vesna Mandić, Srbislav Aleksandrović, Dušan Arsić, Djordje Ivković, Dragan Adamović, Nada Ratković


11:45am - 12:00pm

A concurrent multi-scale modeling approach for fracture in polymers

Saeed Norouzi, Florian Müller-Plathe


12:00pm - 12:15pm

CHARACTERIZATION OF STRUCTURE-PROPERTY RELATIONSHIPS IN COMPRESSION MOLDED LINEAR LOW-DENSITY POLYETHYLENE (LLDPE) FILMS USING CROSS-FRACTIONATION CHROMATOGRAPHY (CFC)

Junkeun Chae, Donguk Kim, Seong Bin Han, Seok Bin Hong, Byoung-Ho Choi


12:15pm - 12:30pm

LASER BEAM WELDING OF AERONAUTICAL AL-CU-LI SHEETS: QUASI-STATIC TENSILE MECHANICAL PERFORMANCE AND QUALITY ASSESSMENT OF WELDED JOINTS

Margarita Christina Charalampidou, Theano EXAMILIOTI, Nikolai KASHAEV, Benjamin KLUSEMANN, Nikolaos D. Alexopoulos


12:30pm - 12:45pm

NUMERICAL SIMULATION OF CORROSION ATTACK ON AL-CU-LI 2198 ALLOY IN DIFFERENT AGEING TEMPERS

Eleftheria-Sotiria Louka, Paraskevas Papanikos, Markos Margaritis, Christina-Margarita Charalampidou, Nikolaos ALEXOPOULOS