MICROPIT FORMATION UNDER ROLLING CONTACT FATIGUE OF BEARINGS THROUGH CRYSTAL PLASTICITY MODELLING

X.Q. Han, S.X. Li, Siyuan Lu, Y.S. Jin

Role of air humidity in residual fatigue lifetime of Railway axle

Lubos Nahlik, Pavel Pokorny, Tomas Vojtek, Pavol Dlhý, Rostislav Fajkos, Ondrej Peter, Pavel Hutar

EFFECT OF RESIDUAL STRESSES ON THE CRACK GROWTH BEHAVIOUR IN WHEELSET AXLES UNDER MIXED-MODE LOADING CONDITIONS

Deni Avgustinovic, Jürgen Maierhofer

Prediction of fatigue life and short crack growth rate based on crystal plasticity finite element method

Guian Qian, Jiamei Zhang, Ningyu Zhang, Ruiyang Li

Experimental study of fatigue crack growth and closure at negative load ratio

Théotime ASSELIN, Olivier ANCELET, Guillaume BENOIT, Florence HAMON, Gilbert HENAFF

Multiscale model simulations for analysing fatigue strength of austenitic stainless steels with bimodal harmonic structures

Hongchang Zhou, Zijie Liu, Shoichi Kikuchi, Kazuki Shibanuma

THE CRACK GROWTH THRESHOLD IS NOT A CONSTANT VALUE

Pavel Pokorny, Tomas Vojtek, Radek Kubicek, Michal Jambor, Lubos Nahlik, Pavel Hutar

Shape Memory-Based Lattice Meta-Material: the analysis of the Octet Truss Cell

Carolina Corda, Enrico Armentani, Chao Gao, Chiara Bertolin

A NUMERICAL MODEL TO SIMULATE INELASTIC CYCLIC BEHAVIOR OF HIGH -STRENGTH WUF-W CONNECTIONS

Sang Whan Han, EunSeon Cho, Sung Yul Park

Accurate modelling of the antiplane crack tip solutions for cracks propagating along spring interfaces

Luis Tavara, Alberto Vazquez-Sanchez, Mar Muñoz-Reja, Vladislav Mantic

CONVERGENCE ANALYSIS OF REALIZATIONS IN PROBABILISTIC FRACTURE MECHANICS: A STUDY ON XLPR CODE

Sang Hyuk Park, Seok Jun Yoon, Nam Su Huh, Dong Jun Kim, Jong Sung Kim

Performance evaluation of artificial neural networks developed for estimation of fatigue behavior of steels

Tea Marohnić, Robert Basan

DENDRITIC CRACK INITIATION AND PROPAGATION IN CERAMIC SOLID ELECTROLYTES OF SOLID-STATE LITHIUM METAL BATTERIES

Bingkun Hu, Ziyang Ning, Peter G. Bruce, T. James Marrow

NOVEL CANTILEVER BENDING BASED METHOD FOR ASSESSING THE EFFECTS OF SUBSTRATE ROUGHNESS AND COATING THICKNESS ON THE INTERFACE FRACTURE ENERGY OF A CERAMIC/METAL SYSTEM

Saim Abbas, Sudhanshu Mallick, Sanjay Sampath, Balila Nagamani Jaya

Crack initiation during thermal shock in multi-material ceramic composites modelled by a stress-energy criterion

Roman Papšík, Oldřich Ševeček, Raúl Bermejo

Finite Element modelling of refractories fracture process zone with gradient enhanced damage models

Zain Ali, Shengli Jin, Dietmar Gruber

ENGINEERING OF FRACTURE TOUGHNESS OF AMORPHOUS SILICA BY EXCESS ELECTRONS AND HOLES

Wataru Matsunaga, Seiya Shichino, Takumi Takahashi, Hiroyuki Hirakata

ALGORITHM FOR PREDICTING CRACK PATH TRAJECTORY BASED ON ITERATIVE COHESIVE ELEMENT INSERTION WITH ADAPTIVE MESH REFINEMENT IN THE CONTEXT OF TWO PHASE TOPOLOGY OPTIMIZATION

Domagoj Uremović, Vladimir Buljak

FRACTURE PROPERTIES OF INTERLOCKING STRUCTURE BY SICKLE JOINT PRINTED WITH A STREREOLITHOGRAPHY 3D PRINTER

Masayuki Arai, Yukiho Saito, Hayato Fujita, Yuxian Meng

Enhancing The Fatigue Performance Of Additively Manufactured ALSI10MG Alloy Using A Novel Chemo-Mechanical Surface Treatment

Muhammad Waqas, Jidong Kang, Kaan Inal, Agustin Diaz

Rapid Modeling of SLM Formed 316L Blocks with the Modified Inherent Strain Method for Residual Stress Prediction

Luyang Geng, Yi Chen, Bo Zhang, Jianming Gong

DIFFUSION OF MOISTURE IN VOIDS OF ADDITIVELY MANUFACTURED COMPOSITES: EFFECT OF CAPILLARY SHAPE

Boyu Li, Konstantinos Baxevanakis, Vadim Silberschmidt

Refining Computational Models through Quasistatic Phase Field Experiments on Anisotropic Materials

Pietro Gazzi, Xinyuan Zhai, Flavien Loiseau, Véronique Lazarus

INVESTIGATION OF THE FEASIBILITY AND STRUCTURAL INTEGRITY OF 316L PARTS PRODUCED VIA MATERIAL EXTRUSION ADDITIVE MANUFACTURING

Saveria Spiller, Nima Razavi

THE EFFECT OF SURFACE TREATMENT ON THE FATIGUE LIFE OF TOPOLOGY OPTIMIZED ALUMINIUM 2139-AM FRONT WING ATTACHMENTS MANUFACTURED ADDITIVELY BY PBF-LB/M

Jenny Köckritz, Dominik Kögler, Robert Szlosarek, Stefan Langenhan, Matthias Kröger

THE EVALUATION OF THE FRACTURE CHARACTERISTICS OF METAL-CERAMIC COMPOSITES PRODUCED BY ADDITIVE MANUFACTURING

Masoomeh Farrokhtar, Gabriella Bolzon, Lisa Biasetto, Vanessa Gastaldi

Fatigue Cracking in Additively Manufactured Titanium Aluminides

Mauro Filippini

Towards the design of an as-built CAD model of strut-based lattices for structural integrity assessment of AM components

Simone Murchio, Marcello Laurenti, Matteo Benedetti, Filippo Berto

Anisotropy of gyroid and stochastic lattice structures under tensile loading

Antti Viljami Järvenpää, Miguel Araya, Timo Rautio

DYNAMIC AND STATIC MECHANICAL PROPERTIES OF 3D PRINTED CERAMIC ELEMENTS

Adriano Jiménez Guerrero, Beatriz Hortigón Fuentes, Enrique Vázquez Vicente, Carlos Rivera Gómez, Carmen Galán Marín

Enhancing Fatigue Behaviour of PBF-LB IN718 Through Surface Quality Optimization

Matias Jaskari, Timo Rautio, Antti Järvenpää

The Effect of Build Strategy on the Residual Stress Distribution in Additively Manufactured Duplex Stainless Steel Pressure Vessels

Anton Emil Odermatt, Nowfal Al-Hamdany, Guilherme Abreu Faria, Sebastian Degener, Nikolai Kashaev

Effect of Temperature on Mechanical Properties of Additively Manufactured AlSi10Mg and Its Lattice Structureture

Shiyu Suzuki, Natsuki Tsushima

CORROSION FAILURE IN BIOLOGICAL FLUIDS OF LASER-MELTED SURFACE OF AISI 321 STAINLESS STEEL

Tsanka Dimitrova Dikova, Natalina Panova, Ivaylo Parushev, Dzhendo Dzhendov

FISH-SCALE ENABLED SEQUENTIAL RUPTURE FOR DYNAMIC ICE REMOVAL

Feng Wang, Senbo Xiao, Zhiliang Zhang, Jianying He

STRUCTURAL INTEGRITY ASSESMENT OF HUMAN TOOTH STRUCTURE

Nikola Momčilović, Ana Petrović, Boris Kosić, Neda Ninković, Vanja Opačić-Galić

Fracture simulation of cortical bone at microscale using cohesive zone model and phase field model

Antonio Ramón Quiñonero-Moya, Diego Infante-García, Ricardo Belda, Eugenio Giner

Statistical thermodynamics of actin filament ruptures in living cells

Aleksandr Sergeevich Nikitiuk, Yuriy Vitalyevich Bayandin, Oleg Borisovich Naimark

THE EFFECT OF THREAD LENGTH IN CANCELLOUS BONE FIXATION UNDER SHEAR LOADING: A BIOMECHANICAL STUDY

Paraskevi Langourani-Kosteletou, Gerasimos Chelidonis, Ermioni D. Pasiou, Olga Savvidou, Stavros K. Kourkoulis

CRYSTALLOGRAPHIC MECHANISM OF CRACK INITIATION AND SHORT CRACK GROWTH DURING CYCLIC DEFORMATION IN ZIRCONIUM

Conghui Zhang

LIFETIME OF TITANIUM ALLOYS UNDER CONSECUTIVE DYNAMIC AND VERY-HIGH-CYCLE FATIGUE LOADS

Vladimir Oborin, Mikhail Bannikov, Mikhail Sokovikov, Oleg Naimark

THE STUDY OF THE CRITICAL DEFECTS IN SELECTED LASER MELTING MATERIAL UNDER VERY HIGH CYCLE FATIGUE LOADING

Ilia Nikitin, Alexander Nikitin, Andrey Shanyavskiy, Boris Stratula

SIMPLIFIED ANALYSIS OF VERY LOW CYCLE FATIGUE CRACK GROWTH IN CIRCUMFERENTIAL SURFACE CRACKED PIPE SUBJECTED TO FOUR-POINT BENDING BY REFERENCE STRESS METHOD

Masahiro Takanashi, Kiminobu Hojo, Masao Itatani, Motoki Nakane, Kenji Yashirodai, Yukio Takahashi, Hiroshi Okada

Experimental observations on fatigue damage in L-PBF 316L steel at different stages of the low cycle fatigue lifetime

Marco Pelegatti, Jaromír Brůža, Filip Šiška, Michal Jambor, Marco Beltrami, Enrico Salvati, Jiří Man

MITIGATING INTERFERING MODES IN CRUCIFORM SPECIMENS FOR RELIABLE ULTRASONIC FATIGUE TESTING: A FINITE ELEMENT AND DIC APPROACH

Diogo Montalvao, Sina Safari, Weston Chidzikwe, Pedro Rodrigues da Costa, Luis Reis, Manuel Freitas

Pore-based prediction of crack initiation life in very high cycle fatigue

Ningyu Zhang, Youshi Hong, Guian QIAN

THE INFLUENCE OF A THERMOMECHANICAL TREATMENT ON THE VHCF-LIMIT OF A HIGH-STRENGTH BEARING STEEL

Jan Sippel, Eberhard Kerscher

Fatigue life estimation of notches using average strain energy density

Jan Klusák, Kamila Kozáková

Description of crack propagation in ductile materials under non-proportional loading conditions Part I: Modelling of deformation-induced plastic anisotropy

Alwin Gibb, Aris Tsakmakis, Michael Vormwald

Description of crack propagation in ductile materials under non-proportional loading conditions Part II: Phase field modelling of crack propagation

Aris Tsakmakis, Alwin Gibb, Michael Vormwald

Fatigue crack propagation at hole edges of nickel-based single-crystal alloys under thermomechanical loading

Jingyu Sun

A NOVEL EXPERIMENTAL DETERMINATION OF MODE I TRACTION-SEPARATION LAW FOR DCB JOINTS USING FIBER OPTIC SENSORS

Jiacheng Liu, Shijie Zhang, Wandong Wang, Yu'e Ma

EMPLOYING A CONTINUUM DAMAGE MODEL TO PREDICT THE FATIGUE LIFE THROUGH ABAQUS

Mohammad Hossein Jalaei, Sofia Pelizzoni, Giovanni Meneghetti, Alberto Campagnolo, Niels Saabye Ottosen, Matti Ristinmaa, Joona Vaara, Tero Frondelius, Reijo Kouhia

BIAXIAL FATIGUE UNDER TENSION-TORSION UFT

Luis Reis, Henrique Lopes, Pedro R. da Costa, Diogo Montalvão, Manuel Freitas

EFFECT OF STRESS STATE AND LOAD RATIO ON THE RATCHET DEFORMATION OF NUCLEAR STRUCTURAL MATERIAL

Sang Eon Kim, Jin Weon Kim, Su Yeong Lee, Jong Sung Kim

ON THE APPLICATION OF MACHINE LEARNING ALGORITHMS FOR THE PREDICTION OF THE FATIGUE RESPONSE OF ADDITIVELY MANUFACTURED PARTS

Alessio Centola, Alberto Ciampaglia, Filippo Berto, Davide Paolino, Andrea Tridello

A NUMERICAL MODEL FOR BENDING FATIGUE LIFE PREDICTION IN GEARS WITH ARBITRARY TOOTH PROFILE

Niko Trumbić, Ivan Čular, Robert Basan, Krešimir Vučković

IMPROVED FATIGUE BEHAVIOR IN HIGH SPEED STEELS BY TRANSFORMATION-INDUCED CRACK CLOSURE

Lukas Walch, Thomas Klünsner, Anton Hohenwarter, Reinhard Pippan, Megan J. Cordill, Stefan Marsoner, Alfred Hackl, Harald Leitner, Gerald Ressel

EXPERIMENTAL STUDY ON CORROSION-FATIGUE OF HIGH-STRENGTH STEEL STRAND BASED ON 3D-SCANNING

Ka Fai Yuen, Peng jiao Wang, Kwok Fai Chung

LINEAR ELASTIC AND ELSTIC-PLASTIC FRACTURE MECHANICS ANALYSIS BY ISOGEOMETRIC ANALYSIS

Hiroshi Okada, Yuhi Tsuchiyama, Yusuke Sunaoka, Yuto Otoguro

A computational model for interface and phase-field dynamic quasi-brittle fracture of solids

Roman Vodička

CASING WEAR EFFICIENCY IN LIGHT OF INTERFACIAL MECHANICS OF MATING SURFACES

Udaya Bhaskar R Sathuvalli, Shaikh Rahman, Bryce Tuck, P V Suri Suryanarayana

FINITE ELEMENT MODELING FOR PREDICTING SIF FOR MODE I IN BRITTLE MATERIAL (WC+CO) UNDER UNIAXIAL COMPRESSION OR UNIAXIAL DISPLACEMENT

Yitzchak Yifrach

INDENTATION SIZE EFFECTS IN NANOSCRATCH TESTS THROUGH A SIZE-DEPENDENT CRYSTAL PLASTICITY FRAMEWORK

Enes Günay, Tuncay Yalçinkaya

S-VERSION FEM-BASED STRATEGY FOR PREDICTING HIGH-SPEED CRACK PROPAGATION BEHAVIOUR IN 3D STRUCTURES

TIANYU HE, FUMIHITO FURUHASHI, NAOKI MORITA, NAOTO MITSUME, KAZUKI SHIBANUMA

Minimization of the total energy under stress condition applied for a versatile analysis of crack onset and propagation in complex scenarios

Karthik Ambikakumari Sanalkumar, Vladislav Mantic, Mar Muñoz-Reja, Luis Távara

PREDICTING THE PROBABILITY OF GLASS BREAKAGE IN LARGE-FORMAT PHOTOVOLTAIC MODULES

Martin Springer, Timothy Silverman, Nick Bosco

Fracture toughness determination by local approach modelling of small punch test

Benedek Kulcsár, Zoltán Bézi, Péter Ungár, László Kiss

MODELLING OF INTER- AND TRANS-GRANULAR CRACK PROPAGATION BY HIGH ORDER PHASE-FIELD METHOD

Manish Kumar, Enrico Salvati

INVESTIGATION OF FIBER-REINFORCED COMPOSITE STRUCTURES SUBJECTED TO PRESSURE LOAD USING FINITE ELEMENT ANALYSIS

Suryanto Suryanto, Ristiyanto Adiputra, Aditya Rio Prabowo, Sören Ehlers, Moritz Braun, Nurul Muhayat, Dominicus Danardono Dwi Prija Tjahjana

A NEW ARTIFICIAL NEURAL NETWORK MODEL FOR PREDICTING FATIGUE LIMIT AND FRACTURE TOUGHNESS VALUES OF SOME STAINLESS STEELS

Djordje Ivković, Dušan Arsić, Dragan Adamović, Aleksandar Sedmak, Vesna Mandić, Marko Delić, Andjela Mitrović

Generation of artificial trajectories for CAD pipeline through Population Based Genetic Generative Artificial Intelligence

Marcello Laurenti, Simone Murchio, Matteo Benedetti, Filippo Berto

A CONFIGURATIONAL FORCE BASED ANALYSIS OF CREEP CRACK GROWTH

Otmar Kolednik, Jozef Predan, Marko Kegl, Nenad Gubeljak

CREEP BEHAVIOR OF TITANIUM-ALUMINUM ALLOY USING MINIATURE TESTING APPROACH

Lei He, Takamoto Itoh

Effect of microstructure on mechanical creep properties of austenitic stainless steels

Marwa BEN BETTAIEB, Alexandra RENAULT-LABORNE, Ludovic VINCENT, Thilo F. MORGENEYER, Sylvain DEPINOY

On high-temperature creep properties of the nickel-based alloy 2.4842 and the identification process using the small punch test and nonlinear optimization techniques

Richard W. Schirmer, Martin Abendroth, Bjoern Kiefer

A Gurson-type damage model combined with dislocation mechanism based viscoplatic model to predict creep life for P91 steel

Lei Wang, Jundong Yin, Dongfeng Li

EVALUATION OF CONSTRAINT EFFECT ON CREEP CRACK GROWTH IN SS316LN

Awanish Kumar Mishra, Avinash Gopalan, V. Karthik, Abhishek Tiwari

ELECTRONS AND HOLES ALTER INTRINSIC MATERIAL STRENGTH

Hiroyuki Hirakata, Wataru Matsunaga, Takahiro Shimada

FATIGUE CRACK INITIATION AND GROWTH IN STEELS CONTAINING A METASTABLE SECOND PHASE: NOTCH AND MICROSTRUCTURAL EFFECTS

Lucia Morales-Rivas, Eberhard Kerscher

NANO-INDENTATION MODELING OF THE SINGLE CRYSTAL COPPER USING STRAIN-GRADIENT CRYSTAL PLASTICITY THEORY AND OPTIMIZATION ALGORITHM

Van-Thanh Pham, Kyoon-Ho Cha, Jong-Sung Kim

Kirsch Problem Incorporating Surface Stresses under Plane Stress

Aleksandra B. Vakaeva, Mikhail A. Grekov

Investigation of microstructural evolution in Paris law regime of fatigue crack growth rate tested nano-structured bainite

Bhawesh Chhajed, Avanish Kumar, Aparna Singh

Effect of composition on impact toughness of nano-pearlite

Rahul Singh, Aparna Singh