2:00pm
-
3:45pm |
TC 3.08: Thematic Symposium: TC 3 - Fracture and fatigue failure of engineering materials and structures 8
Location: HALL Voda Jug (Hall 1)
Chair: Camilla Ronchei
Chair: Daniela Scorza
Chair: ANDREA ZANICHELLI
2:00pm - 2:15pm
FATIGUE CRACK GROWTH UNDER LARGE SCALE YIELDING FOR MULTIAXIAL LOADING
Camille LE GOFF, Toma ZANCHI, Alban MONSAVOIR, Ida RAOULT, Pierre ARNAUD, Jacques BESSON, Vincent MAUREL
2:15pm - 2:30pm
QUANTITATIVE FRACTOGRAPHY AND TEXTURE EFFECT IN TITANIUM ALLOY ON FATIGUE STRENGTH
Mikhail Bannikov, Aleksandr Balakhnin, Vladimir Oborin, Dmitrii Rasposienko, Aleksandr Svirid
2:30pm - 2:45pm
TEMPERATURE-CORRECTED ELECTRICAL RESISTANCE IN FATIGUE LIFE PREDICTION METHODS FOR HIGHER TESTING FREQUENCIES
Jonas Anton Ziman, Moritz Maul, Fabian Weber, Johannes Leon Otto, Frank Walther, Peter Starke
2:45pm - 3:00pm
ALLOYING IMPACTS ON AUSTENITE STABILITY AND FATIGUE CRACK PROPAGATION IN MEDIUM CARBON DIRECT QUENCHED AND PARTITIONED STEELS
Sumit Ghosh, Gaurav Kumar, Sakari Pallaspuro, Mahesh Somani, Sushil Mishra, Amol Gokhale, Jukka Kömi
3:00pm - 3:15pm
Investigation of the Anisotropic High Cycle Fatigue Performance and Failure Mechanism of L-DEDed Ni-based Superalloy
Zhenan Zhao, Shaoxing Qu
3:15pm - 3:30pm
Method for predicting crack size using amplitude change in titanium alloy under bending vibration
Junji Sakamoto, Naoya Tada, Takeshi Uemori
3:30pm - 3:45pm
Effect of salt fluxing during liquid treatment on the dispersion of the tensile properties of an AlSi9Cu3(Fe) alloy
Veronica Milani, Giuliano Angella, Giulio Timelli
|
TC 21.11: Thematic Symposium: TC 21 - Hydrogen embrittlement in metallic materials: pipeline transport, hydrogen storage, and other applications 11
Location: HALL Voda Sjever (Hall 2)
Chair: Gilbert HENAFF
Chair: Abdelali Oudriss
Chair: Milos B. Djukic
2:00pm - 2:15pm
THE EFFECT OF HYDROGEN GAS ON TENSILE AND FATIGUE PROPERTIES OF HIGH STRENGHT CARBON STEELS
Eduard Navalles I Martínez, Birhan Sefer, Núria Fuertes Casals, Marta-Lena Antti, Pia Åkerfeldt, Esa Virolainen, Caroline Klar Jaans
2:15pm - 2:30pm
Improved Hydrogen Embrittlement Resistance of 316 Stainless Steel Produced using Direct Energy Deposition
Esteban Rodoni, Norberto Jimenez-Mena, Thaneshan Sapanathan, Lisa Claeys, Tom Depover
2:30pm - 2:45pm
Multi-modal 3D image-based simulation of propagation behavior of intergranular crakcs in Al-Zn-Mg alloy
Ryota Higa, Hiro Fujihara, Hiroyuki Toda, Kenichi Ebihara, Tsuyoshi Mayama, Masayuki Uesugi, Akihisa Takeuchi
2:45pm - 3:00pm
ON THE MECHANICAL PROPERTIES OF LASER POWDER BED FUSION 316L CONTAINING POROSITIES AND CHARGED VIA GASEOUS HYDROGEN
Ali Nabizada, Lisa Claeys, Pascal J Jacques, Tom Depover, Kim Verbeken
3:00pm - 3:15pm
THE INFLUENCE OF MICROSTRUCTURE ON HYDROGEN EMBRITTLEMENT ABOUT HIGH STRENGTH SPRING STEEL
Manami Sunako, Masataka Mizumoto, Azusa Ooi, Eiji Tada
3:15pm - 3:30pm
Measuring Hydrogen Embrittlement in Additively Manufactured Steel Structures using Hollow Tensile Test Specimen
Jannik Brumm, Anton Odermatt, Maximilian Passing, Julian Jepsen, Thomas Klassen, Nikolai Kashaev
3:30pm - 3:45pm
SCREENING OF MECHANICAL DEGRADATION OF COMBUSTION ENGINE AND EXHAUST METALLIC MATERIALS IN HIGH PRESSURE AND HIGH TEMPERATURE HYDROGEN GAS ENVIRONMENT
Birhan Sefer, Pontus Rydgren, Nuria Fuertes, Eduard Navalles, Niklas Israelsson, Emil Edin, Lars Olof Nordin
|
CMH.2: Computational mechanics 2
Location: HALL Zemlja (Hall 3)
Chair: Hiroshi Okada
2:00pm - 2:15pm
Minimization of the total energy under stress condition applied for a versatile analysis of crack onset and propagation in complex scenarios
Karthik Ambikakumari Sanalkumar, Vladislav Mantic, Mar Muñoz-Reja, Luis Távara
2:15pm - 2:30pm
PREDICTING THE PROBABILITY OF GLASS BREAKAGE IN LARGE-FORMAT PHOTOVOLTAIC MODULES
Martin Springer, Timothy Silverman, Nick Bosco
2:30pm - 2:45pm
Fracture toughness determination by local approach modelling of small punch test
Benedek Kulcsár, Zoltán Bézi, Péter Ungár, László Kiss
2:45pm - 3:00pm
MODELLING OF INTER- AND TRANS-GRANULAR CRACK PROPAGATION BY HIGH ORDER PHASE-FIELD METHOD
Manish Kumar, Enrico Salvati
3:00pm - 3:15pm
INVESTIGATION OF FIBER-REINFORCED COMPOSITE STRUCTURES SUBJECTED TO PRESSURE LOAD USING FINITE ELEMENT ANALYSIS
Suryanto Suryanto, Ristiyanto Adiputra, Aditya Rio Prabowo, Sören Ehlers, Moritz Braun, Nurul Muhayat, Dominicus Danardono Dwi Prija Tjahjana
3:15pm - 3:30pm
A NEW ARTIFICIAL NEURAL NETWORK MODEL FOR PREDICTING FATIGUE LIMIT AND FRACTURE TOUGHNESS VALUES OF SOME STAINLESS STEELS
Djordje Ivković, Dušan Arsić, Dragan Adamović, Aleksandar Sedmak, Vesna Mandić, Marko Delić, Andjela Mitrović
3:30pm - 3:45pm
Generation of artificial trajectories for CAD pipeline through Population Based Genetic Generative Artificial Intelligence
Marcello Laurenti, Simone Murchio, Matteo Benedetti, Filippo Berto
|
FAC: Failure analysis and case studies
Location: HALL Vatra (Hall 4)
Chair: Eberhard Kerscher
2:00pm - 2:15pm
Fatigue analysis of axisymmetric chiral cellular structures made of 316L stainless steel
Žiga Žnidarič, Nejc Novak, Branko Nečemer, Srečko Glodež
2:15pm - 2:30pm
UNDERSTANDING THE MIXED MODE FRACTURE BEHAVIOUR OF PRESSURELESS SILVER SINTERED JOINTS DESIGNED FOR POWER PACKAGES
Noud P.T. Schoenmakers, Johan P.M. Hoefnagels, Edsger C.P. Smits, Olaf v.d. Sluis
2:30pm - 2:45pm
Evaluating Quasi-Static and Fatigue Performance of AlSi10Mg Sheet-TPMS-Based Lattices: Impact of Scale, Unit Cell Size and Wall Thickness
Zhuo Xu, Aritra Sarkar, Ricardo Branco, Luis Borrego, Sebastian Wronski, Nima Razavi
2:45pm - 3:00pm
Micromechanics Modeling of Ceramic Matrix Composites Considering the Probability of Crack Deflection
Takehiro Shimada, Tsubasa Watanabe
|
TC 15.2: Thematic Symposium: TC 15 - Structural integrity of additively manufactured materials 2
Location: HALL Zrak (Hall 5)
Chair: Liviu Marsavina
2:00pm - 2:15pm
NUMERICAL MODEL FOR IN-PLANE FLEXURAL BEHAVIOUR SIMULATION OF TITANIUM LATTICE-CORED SHORT BEAMS
Costanzo Bellini, Rosario Borrelli, Vittorio Di Cocco, Stefania Franchitti, Francesco Iacoviello, Larisa Patricia Mocanu, Luca Sorrentino
2:15pm - 2:30pm
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF FRETTING FATIGUE RESPONSE IN ADDITIVELY MANUFACTURED Ti-6Al-4V
Grzegorz Glodek, Sanjay Gothivarekar, Brecht Van Hooreweder, Reza Talemi
2:30pm - 2:45pm
EFFECTS OF DEFECT AND MICROSTRUCTURE ON HIGH-CYCLE FATIGUE OF SLM Ti-6Al-4V
Jian-Feng Wen, Nai-Jian Dong, Kang-Kang Wang, Bo Chen, Shan-Tung Tu
2:45pm - 3:00pm
Cyclic elastic loading behavior in pre-strained lattice structures
Ivan Senegaglia, Giuseppe Macoretta, Tommaso Grossi, Bernardo Disma Monelli
3:00pm - 3:15pm
A FRACTURE MECHANICS-BASED FATIGUE ASSESSMENT OF ADDITIVELY MANUFACTURED LATTICE STRUCTURES FROM A205 ALLOY POWDERS
Francesco Collini, Emilie Beevers, Berk Baris Celik, Brecht Van Hooreweder, Giovanni Meneghetti
3:15pm - 3:30pm
Fracture-mechanical assessment of the effect of defects on the fatigue life of additively manufactured titanium aluminides
Mirko Teschke, Juliane Moritz, Axel Marquardt, Nick Semjatov, Christoph Leyens, Carolin Körner, Frank Walther
|
FRM: Fatigue resistance of metals
Location: HALL Online (Hall 6)
Chair: Ingo Scheider
2:00pm - 2:15pm
Fatigue limit assessment of interacting small defects by cyclic R-curve analysis
Stefan Fladischer, Michael Stoschka, Florian Grün
2:15pm - 2:30pm
Unveiling B-FADE: Bayesian-FAtigue moDel Estimator. Overview of the Software Package and its Application to the Probabilistic Evaluation of El Haddad Curves
Alessandro Tognan, Enrico Salvati
2:30pm - 2:45pm
Comparative Analysis of High-Cycle Fatigue Behavior and Failure Mechanisms in Ultrahigh-Strength CrNiMoWMnV Steels
Atef Saad Hamada, Mohammed Ali, Sumit Ghosh, Matias Jaskari, Tarek Allam, Ruth Schwaiger, Mamdouh Eissa, Taha Mattar
2:45pm - 3:00pm
Fatigue life assessment of cold-formed ultra-high strength steel sections
Okan Yılmaz, Dennis Van Hoecke
3:00pm - 3:15pm
Fatigue behaviour of LPBF-produced M789 martensitic steel
Kashim Ohinoyi Sanni, Myriam Brochu, Matteo Cova
3:15pm - 3:30pm
A new threshlod model for physically small crack and long crack based on CTOD
Lindong Chai, Han Lu, Yihai He, Wei Zhang
|
MMF.2: Micromechanisms of fracture and fatigue 2
Location: HALL 7 (5th Floor)
Chair: Pietro Antonio Martelli
Chair: Mykhailo Vitaliyovych Karuskevych
2:00pm - 2:15pm
A MICROELEMENT BASED SEMI-ANALYTICAL MODEL FOR HIGH CYCLE FATIGUE
Bhukya Venkatesh, Srikanth Vedantam
2:15pm - 2:30pm
FEM Module Development Considering TRIP
Rintaro Tsuda, Ritsuki Morohoshi, Noriyuki Tsuchida, Tomoya Kawabata
2:30pm - 2:45pm
WEAKEST-LINK MODELLING OF NOTCHED GEOMETRIES OF BRITTLE MATERIALS
Daniela V. Klein, Gustaf Linden, Jonas Faleskog
2:45pm - 3:00pm
High temperature fatigue behavior and life prediction of notched specimens made of 316H stainless steel
Jiayuan Gu, Xiaowei Wang, Guanhong Chen, Zhen Zhang, Jianming Gong
3:00pm - 3:15pm
Calibration of void nucleation parameters in a ductile fracture model using acoustic emission data
Subham Chakraborty, Anuradha Banerjee, Shyam Keralavarma
|
|