Scientific dissemination in structural integrity: from the dawn of civilization to web 3.0

Francesco Iacoviello

Combining Non-Extensive Statistical Mechanics with Natural Time Analysis to predict entrance of mechanically loaded systems into their critical stage

Stavros Kourkoulis

ADVANCED CHARACTERIZATION OF BASALT FIBER REINFORCED COMPOSITES USING ENERGY METHODS

Martina Totaro, Giacomo Risitano, Pasqualino Corigliano, Guido Di Bella, Danilo D'Andrea

Development of a damage-dependent modified material model for enhanced description of transient material behavior

Tim Korschinsky, Benjamin Möller, Marvin Kiel, Matthias Hecht

FLOW FORMING TO IMPROVE FATIGUE LIFE OF ORTHOPEDIC IMPLANTS

Mohamed Akram Mechter, Mina Gadour, Léa Romain, Myriam Brochu

FATIGUE RESISTANCE PREDICTION MODEL APPLIED TO 410NiMo STAINLESS STEEL WELDS

Cédric Constantineau, Pierre-Antony Deschênes, Myriam Brochu

NOVEL INDICATOR & INNOVATIVE METHOD FOR ONSET DAMAGE DETECTION IN VERY HIGH CYCLE FATIGUE TESTS (VHCF)

Julio C. Gomez-Mancilla

EXPLORING THE IMPACT OF HETEROGENEOUS YIELDING ON DUCTILE FAILURE IN ALUMINIUM ALLOYS

David Morin, Lars Edvard Blystad Dæhli, Odd Sture Hopperstad

EVALUATION OF CRACK FRONT GEOMETRY BY STRAIN FIELD CLASSIFICATION USING NEURAL NETWORKS

Giovanni Chianese, Giovanni Pio Pucillo, Davide Leonetti

DISLOCATION CELLS EXPLAIN THE HIGH HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF ADDITIVELY MANUFACTURED INCONEL 718

Alfredo Zafra, Claudia Santos Maldonado, Minh-Son Pham, Emilio Martínez-Pañeda

Hydrogen induced intergranular fracture of NiCoCr medium entropy alloys under in-situ hydrogen charging condition

Hang Su, Tingshu Chen, Chaoming Wang, Sui Wang, Anqing Fu

MODELLING OF HYDROGEN-INDUCED FAILURE IN POLYCRYSTALLINE MATERIALS THROUGH A STRAIN GRADIENT CRYSTAL PLASTICITY FRAMEWORK

Berkehan Tatli, Enes Günay, Tuncay Yalçinkaya

NUMERICAL MODELLING AND EXPERIMENTAL CHARACTERIZATION OF HYDROGEN EMBRITTLEMENT OF PIPELINESTEEL

Niels Schultheiss, Reiner Trautmannsberger, Sebastian Münstermann, Aida Nonn

DEVELOPMENT OF HYDROGEN VIDEO IMAGING SYSTEM FOR ANALYZING HYDROGEN DIFFUSION BEHAVIORS IN POLYCRYSTALLINE METALS

Hiroshi Kakinuma, Saya Ajito, Tomohiko Hojo, Motomichi Koyama, Eiji Akiyama

STRATEGIZING FOR HYDROGEN EMBRITTLEMENT BY PROTECTING THE WEAKEST MICROSTRUCTURAL ELEMENT

Mohamed Naguib Elkot, Binhan Sun, Dirk Ponge, Dierk Raabe

Insights into hydrogen-defect interaction in nanostructured materials at large strains

Marlene Kapp, Michael Zawodzki, Stanislav Zak, Masoud Moshtaghi, Bernd Loder, Gregor Mori, Jürgen Eckert, Reinhard Pippan, Oliver Renk

MECHANISM-BASED PREDICTIVE MODEL FOR HYDROGEN EMBRITTLEMENT CONSIDERING EFFECT OF PLASTICITY ON DECOHESION

Haiyang Yu, Jianying He, Zhiliang Zhang

CRYSTALLOGRAPHIC MECHANISM OF CRACK INITIATION AND SHORT CRACK GROWTH DURING CYCLIC DEFORMATION IN ZIRCONIUM

Conghui Zhang

LIFETIME OF TITANIUM ALLOYS UNDER CONSECUTIVE DYNAMIC AND VERY-HIGH-CYCLE FATIGUE LOADS

Vladimir Oborin, Mikhail Bannikov, Mikhail Sokovikov, Oleg Naimark

THE STUDY OF THE CRITICAL DEFECTS IN SELECTED LASER MELTING MATERIAL UNDER VERY HIGH CYCLE FATIGUE LOADING

Ilia Nikitin, Alexander Nikitin, Andrey Shanyavskiy, Boris Stratula

SIMPLIFIED ANALYSIS OF VERY LOW CYCLE FATIGUE CRACK GROWTH IN CIRCUMFERENTIAL SURFACE CRACKED PIPE SUBJECTED TO FOUR-POINT BENDING BY REFERENCE STRESS METHOD

Masahiro Takanashi, Kiminobu Hojo, Masao Itatani, Motoki Nakane, Kenji Yashirodai, Yukio Takahashi, Hiroshi Okada

Experimental observations on fatigue damage in L-PBF 316L steel at different stages of the low cycle fatigue lifetime

Marco Pelegatti, Jaromír Brůža, Filip Šiška, Michal Jambor, Marco Beltrami, Enrico Salvati, Jiří Man

MITIGATING INTERFERING MODES IN CRUCIFORM SPECIMENS FOR RELIABLE ULTRASONIC FATIGUE TESTING: A FINITE ELEMENT AND DIC APPROACH

Diogo Montalvao, Sina Safari, Weston Chidzikwe, Pedro Rodrigues da Costa, Luis Reis, Manuel Freitas

Pore-based prediction of crack initiation life in very high cycle fatigue

Ningyu Zhang, Youshi Hong, Guian QIAN

FRACTURE ANALYSIS OF STIFFENED LAMINATED COMPOSITE PLATES

C.W. Hsu, C. Mittelstedt, Chyanbin Hwu

INSTRUMENTED END-NOTCHED FLEXURE TESTING TO CHARACTERIZE THE INTERFACE TOUGHNESS OF ENVIRONMENTAL BARRIER COATINGS ON CERAMIC MATRIX COMPOSITES

Thomas VANDELLOS, Jérôme SINISTRO, Vincent HERB

Determination of CFRP Intralaminar Fracture Properties in the Calibration of a Non-Local Damage Model for Crash Application

Maria Pia Falaschetti, Francesco Rondina, Johan Birnie Hernandez, Luca Raimondi, Enrico Troiani, Lorenzo Donati

EVALUATION OF DAMAGE BEHAVIOR OF CFRP LAMINATES UNDER STATIC BENDING LOADS USING X-RAY MICRO TOMOGRAPHY

Hideki Tsuruta, Myunghun Woo, Shinya Fukushige, Yohei Sakakibara, Masahiro Takanashi

Characterization of Temperature-Dependent Debonding Damage in Highly Particle-Filled Thermoplastic Composites (HPFTC)

Kyung Ha Kim, Ilhyun Kim, Seongho Yoon, Byoung-Ho Choi, Sunyoung Lee, Hyunseob Lee

THE EFFECT OF CROSS-CONTAMINATIONS IN Al AND CU FEEDSTOCK ON LASER POWDER BED FUSION PARTS

Christopher Singer, Max Horn, Georg Schlick, Johannes Schilp, Saba Zabihzadeh, Christina-Margarita Charalampidou, Nikolaos ALEXOPOULOS

LOW-ENERGY LASER PEENING FOR STRUCTURAL INTEGRITY IMPROVEMENT OF THIN WELDED COMPONENTS

Yuji Sano, Kiyotaka Masaki, Yoshio Mizuta, Satoshi Tamaki, Tomonao Hosokai

FATIGUE LIFE EXTENDING BY INNOVATIVE LASER PEENING ON A2024-T3 ALUMINUM ALLOY

Kiyotaka MASAKI, Tomokazu SANO, Yuji SANO

EFFECTS OF LASER SHOCK PEENING WITHOUT COATING ON THIN CLAD AND UNCLAD AERONAUTICAL 2024-T3 ALUMINIUM ALLOY

Claudia Polese, Dean van Aswegen

ON THE IDENTIFICATION OF JOHNSON-COOK MATERIAL MODEL PARAMETERS FOR LASER SHOCK PEENING PROCESS SIMULATION

Ruslan Kuliiev, Sören Keller, Nikolai Kashaev

ENHANCING PROPERTIES OF WIRE ARC ADDITIVE MANUFACTURED ER5356 AL ALLOY WITH VIBRATION-ASSISTED DEPOSITION AND LASER SHOCK PEENING

Mirza Imširović, Uroš Trdan, E. A. Trdan, Damjan Klobčar, Aleš Nagode, Gregor Čepon, Laurent Berthe

RESIDUAL STRESS ENGINEERING FOR STRUCTURAL PERFORMANCE ENHANCEMENT OF METALLIC AIRFRAMES. LASER SHOCK PEENING INDUSTRIAL SOLUTION FOR MAINTENANCE REPAIR OVERHAUL USE

Domenico Furfari, Romain Ecault

FLEXURAL PROPERTIES OF HIGH-STRENGTH CONCRETE WITH VARIABLE COMPOSITION OF SYNTHETIC FIBERS AT ELEVATED TEMPERATURES

Rami Anton Hawileh, Maha Assad, Jamal Abdalla, Ahmed Selim, Abdulrahman Mohamed, Abdulrahman Madkour

THE EFFECT OF ANCHOR’S INCLINATION ANGLE ON THE FLEXURAL ENHANCEMENT OF CFRP-STRENGTHENED RC BEAMS

Maha Assad, Rami Hawileh, Jamal Abdalla

PREDICTION OF THE COMPRESSIVE STRENGTH OF NORMAL CONCRETE WITH VARIABLE PERCENTAGES OF FLY ASH USING MACHINE LEARNING

Hussam Safieh, Rami Hawileh, Sayan Shaw, Jamal Abdalla

INTEGRATING EXPERIMENTAL BOND-SLIP MODELS INTO FINITE ELEMENT MODELLING OF CFRP-STRENGTHENED CONCRETE PRISMS

Aseel Salameh, Rami Hawileh, Maha Assad, Jamal Abdalla

Intrinsic fracture energy of 3D printed cement mortar obtained from snapback be-haviour in indirect tensile testing

Zili Huang, Giang D Nguyen, Murat Karakus, Tran Thanh Tung, Ha Hong Bui

MECHANICAL PERFORMANCE OF SUSTAINABLE PE-ECC USING GGBS AND DUNE SANDS

Eyad Magdy Shahin, Jamal El-Din Abdalla, Rami Hawileh

SUSCEPTIBILITY TO ENVIRONMENT-ASSISTED CRACKING OF MG ALLOYS AFFECTED BY SOLUTION PH AND AL CONTENT

Takumi Haruna, Hiroshi Ohshima, Ryota Kishimoto

THE NORMALIZED DISTANCE BETWEEN THE SOURCES OF ACOUSTIC EVENTS AS A STRUCTURAL HEALTH MONITORING PARAMETER

Dimos Triantis, Ilias Stavrakas, Ermioni D. Pasiou, Stavros K. Kourkoulis

Assessment of the effects of high-pressure gaseous hydrogen on pipeline and casing steels using hollow specimens

Giuseppe Macoretta, Bernardo Disma Monelli, Carlo Maria Belardini, Leonardo Bertini, Tommaso Grossi, Alberto Pontarllo, Maria Elena Gennaro, Fabio Todesco, Renzo Valentini

Effect of Nb addition on the hydrogen embrittlement resistance of thermomechanically processed low-carbon CrNiMnMoB ultrahigh-strength steel

Mohammed Ali, Tarek Allam, Atef Hamada, Jukka Kömi

Review of INCEFA-SCALE Project Advances in Environmentally Assisted Fatigue in Pressurized Water Reactor

Sergio Arrieta, Sergio Cicero, Alec McLennan, Roman Cicero, Jack Beswick, Stephan Courtin, Zaiqing Que

Hydrogen effect on tensile properties of pipeline steel: a comparison between hollow and solid specimens

Alessandro Campari, Florian Konert, Jonathan Nietzke, Oded Sobol, Antonio Alvaro

MICROSTRUCTURAL, MECHANICAL AND FRACTURE BEHAVIOUR OF A GO REINFORCED MORTAR AT DIFFERENT CURING TIMES

Andrea Zanichelli, Andrea Carpinteri, Camilla Ronchei, Daniela Scorza, Sabrina Vantadori

MULTIAXIAL FATIGUE STRENGTH ASSESSMENT OF 42CrMo4 STEEL SPECIMENS BASED ON AN ELASTIC-PLASTIC STRAIN ENERGY DENSITY APPROACH

Sofia Pelizzoni, Alberto Campagnolo, Giovanni Meneghetti

FRACTURE TOUGHNESS TESTING OF SUB-SIZED SPECIMENS FOR ASSESSEMNT OF TEMPERATURE AND STRAIN-RATE SENSITIVITY OF REACTOR PRESSURE VESSEL STEEL

Ben Michael Brian Sargeant, Catrin Mair Davies, Paul Hooper

MODELLING THE EFFECT OF CARBIDE POPULATION AND BAINITIC GRAIN SIZE ON THE FRACTURE TOUGHNESS OF THREE FORGED LOW ALLOY STEELS

Cainã BEMFICA, Ludovic VINCENT, Bernard MARINI, Jean-Philippe MATHIEU, Pierre JOLY

FATIGUE AND FRACTURE BEHAVIOR OF HIGH-STRENGTH LATH MARTENSITIC STEEL

Mihaela Iordachescu, Patricia Santos, Andres Valiente

Computational Framework for Fatigue Analysis of Metals with nonconstant cyclic Stress-Strain Curve

Robert Szlosarek, Chinmay Salvi, Pia Nitzsche, Sebastian Henkel, Horst Biermann, Matthias Kröger

THE IMPACT OF HYDROGEN ON THE PLASTICITY OF FCC METALS AND ALLOYS BASED ON NANO-INDENTATION INVESTIGATION

Xavier FEAUGAS, Abdelali OUDRISS, Yasmine BEN JEDIDIA, Siva MURUGAN

ENVIRONMENT INDUCED EMBRITTLEMENT BEHAVIOR OF HIGH-ENTROPY ALLOYS

Hong Luo, Zhimin Pan, Qiancheng Zhao

Limitations of Hydrogen Detection after 150 years of Hydrogen Damage Research in Metallurgy

Matheus A. Tunes, Stefan Tichy, David Scheiblehner, Andreas Sprung, Eva Gerold, Patrick Willenshofer, Sebastian Samberger, Thomas M. Kremmer, Irmgard Weißensteiner, Philip Dummitraschewitz, Helmut Antrekowitsch, Peter J. Uggowitzer, Milos B. Djukic, Stefan Pogatscher

AN OVERVIEW OF THE EFFECT OF NANO/MICRO SIZED PARTICLES IN HYDROGEN EMBRITTLEMENT IN ALUMINUM BASED STRUCTURES

Mahdieh Safyari, Masoud Moshtaghi

Hydrogen embrittlement in nickel alloys: some insights

Xu Lu, Roy Johnsen

EXPERIMENTAL AND SIMULATION APPROACHES TO HYDROGEN EMBRITTLEMENT BEHAVIOUR OF ADDITIVELY MANUFACTURED ALLOYS AND STRUCTURES

Masoud Moshtaghi

Evaluation of hydrogen-induced cracking by using wedge-loaded compact tension specimens

Amirhossein Jabbari Mostahsan, Zahra Silvayeh, Peter Auer, Jennifer Stippich, Andreas Drexler, Josef Domitner

THE INFLUENCE OF A THERMOMECHANICAL TREATMENT ON THE VHCF-LIMIT OF A HIGH-STRENGTH BEARING STEEL

Jan Sippel, Eberhard Kerscher

Fatigue life estimation of notches using average strain energy density

Jan Klusák, Kamila Kozáková

Description of crack propagation in ductile materials under non-proportional loading conditions Part I: Modelling of deformation-induced plastic anisotropy

Alwin Gibb, Aris Tsakmakis, Michael Vormwald

Description of crack propagation in ductile materials under non-proportional loading conditions Part II: Phase field modelling of crack propagation

Aris Tsakmakis, Alwin Gibb, Michael Vormwald

Fatigue crack propagation at hole edges of nickel-based single-crystal alloys under thermomechanical loading

Jingyu Sun

A NOVEL EXPERIMENTAL DETERMINATION OF MODE I TRACTION-SEPARATION LAW FOR DCB JOINTS USING FIBER OPTIC SENSORS

Jiacheng Liu, Shijie Zhang, Wandong Wang, Yu'e Ma

EMPLOYING A CONTINUUM DAMAGE MODEL TO PREDICT THE FATIGUE LIFE THROUGH ABAQUS

Mohammad Hossein Jalaei, Sofia Pelizzoni, Giovanni Meneghetti, Alberto Campagnolo, Niels Saabye Ottosen, Matti Ristinmaa, Joona Vaara, Tero Frondelius, Reijo Kouhia

INSTRUMENTED INDENTATION BASED METHODS TO ASSESS FRACTURE TOUGHNESS (KIC) OF SELF COMPACTING CONCRETE: INFLUENCE OF WATER TO BINDER (W/B) RATIO AND TYPE OF CONCRETE

Said GRAIRIA, Abdelkrim MAANSAR, Adel SAOUDI, Alex MONTAGNE, Didier CHICOT

ANALYTICAL AND NUMERICAL STUDY OF FGM SANDWICHES UNDER THE EFFECT OF THERMO-MECHANICAL LOADS

Soufiane Abbas, Hinde Laghfiri

THE EFFECT OF RESIDUAL STRESSES ON TRANSVERSE CRACKING IN CROSS-PLY COMPOSITE LAMINATES

Israel G. García, Vladislav Mantic

NON-LINEAR IMPLEMENTATION OF THE MINIMIZATION OF THE TOTAL ENERGY SUBJECTED TO A STRESS CONDTION TO PREDICT MULTIPLE DEBONDS IN THE ILTS TEST

José Luis Guzmán López, Mar Muñoz-Reja Moreno, Luis Távara Mendoza, Vladislav Mantič Lescisin

DESIGN OF TOUGH INHOMOGENEOUS MATERIALS FOR BIAXIAL LOADING

Drazen Brescakovic, Otmar Kolednik

NOVEL XPS LIGHTWEIGHT THERMOINSULATING CEMENT MORTAR: EXPERIMENTAL INVESTIGATION OF THE MECHANICAL BEHAVIOUR

Zoi S. Metaxa, Violetta K. Kytinou, Vasilios D. Prokopiou, Adamantis G. Zapris, Eleni Apostolidou, Nikolaos D. Alexopoulos

In situ full-field elastic strain mapping by hr-ebsd of a short fatigue crack

Xiao Su, Thomas James Marrow

In-situ observation of deformation mechanisms in fine-grained nuclear graphite by high temperature disc compression

Marcus Williamson, Rory Whybrow, Stefan Michalik, Christina Reinhard, Thomas James Marrow

Fracture characteristics of the CrMnFeCoNi alloy: Coarse-grained vs. nanocrystalline grain size regime

Anton Hohenwarter, Simon Pillmeier, Reinhard Pippan, Jürgen Eckert

Martensite micro-plasticity & damage, unraveled by nano- to macro-scale in-situ strain mapping & CP modelling

Johan Hoefnagels, Tijmen Vermeij, Job Wijnen, Vahid Rezazadeh, Marc Geers, Ron Peerlings

The Effect of Plasticity on Cleavage Initiators in Local Approach to Fracture Modelling

Michael Ford, Andrey Jivkov, Peter James

The effect of T-Stress on fatigue crack growth path stability in thin-walled AA2024-T3 sheets

Vanessa Schöne, Tobias Strohmann, Eric Breitbarth

FAILURE CRITERION FOR THREAD-LIKE FIBERS IN THERMOELASTIC MEDIUM

Oleh Yasniy, Andrii Korniichuk, Iryna Didych, Dmytro Tymoshchuk, Iaroslav Pasternak

MECHANICAL CHARACTERIZATION OF NYLON CF PRINTED BY FDM PROCESS USING ENERGY METHODS

Danilo D'Andrea, Giacomo Risitano, Pasqualino Corigliano, Dario Santonocito, Davide D'Andrea

COMPARISON OF GLOBAL AND LOCAL METHODS FOR EVALUATION OF THE MODE I ENERGY RELEASE RATE IN MULTI-DIRECTIONAL COMPOSITE DCB SPECIMENS SUBJECTED TO CYCLIC LOADING

Mor Mega, Roy Amkies, Yitzhak Hay Magrafta, Mike van der Panne, John-Alan Pascoe

The hybridization effect on the mechanical and piezoresistive behavior of epoxy nanocomposites

João Miguel Parente, Abilio silva, Paulo Reis

ENHANCING CRACK RESISTANCE AND STRENGTH OF RECYCLED AGGREGATE CONCRETE WITH END-OF-LIFE TIRE STEEL FIBERS

Asad Zia, Ivan Holly, Jaroslav Prokop

IMPROVEMENT IN FATIGUE PROPERTIES OF WELDED JOINTS USING CRACK INITIATION RESISTANT STEEL PART 1: FATIGUE STRENGTH OF WELD HEAT AFFECTED ZONE AND CRUCIFORM FILLET WELDED JOINTS

Takanori Ito, Yasuhito Takashima, Masao Kinefuchi

IMPROVEMENT IN FATIGUE PROPERTIES OF WELDED JOINTS USING CRACK INITIATION RESISTANT STEEL PART2 : FATIGUE CRACK INITIATION LIFE OF RIB-TO-DECK WELDED JOINTS OF ORTHOTROPIC STEEL BRIDGE DECKS

Akito Tabata, Masahiro Matsushita, Tetsuo Yamaguchi, Yasuhito Takashima, Toshiyuki Ishikawa

Evaluation of the C* Parameter in Welded Joints of 9%Cr Steels Under Consideration of the Heat Affected Zone

Josef Arthur Schönherr, Falk Mueller, Christian Kontermann, Matthias Oechsner

Fracture of refill friction stir spot welds: microstructure, residual stresses and other in-fluencing factors

Niklaas Becker, Benjamin Klusemann

EXPERIMENTAL STUDY ON 690MPa HIGH STRENGTH STEELS AND THEIR WELDED SECTIONS

Wei CHEN, Kwok-Fai CHUNG

INVESTIGATION OF THE CORROSION-INDUCED DAMAGE MECHANISM OF AERONAUTICAL ALUMINUM ALLOYS 2024 AND 2198 RIVETED SHEETS

Margarita Christina Charalampidou, George Grammatikos, Paraskevas Papanikos, Eleftheria-Sotiria Louka, Nikolaos D. Alexopoulos

FRACTURE BEHAVIOR OF SIMULATED HEAT AFFECTED ZONES IN S690QL HIGH STRENGTH STEEL

Damir Tomerlin, Dražan Kozak, Tomaž Vuherer, Norbert Enzinger, Maria Cecilia Poletti, Nenad Gubeljak

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF FATIGUE CRACK GROWTH IN ANGLED STRUCTURAL COMPONENTS

Ferdinand Dömling, Florian Paysan, Eric Breitbarth

Experimental and Numerical Investigation on Crack Propagation in High Strength Steels and Conventional Steels

Monisha Manjunatha, Jonatan Marin Perez, Tugrul Comlekci, Donald Mackenzie, Yevgen Gorash

ON THE ASSESSMENT OF DYNAMIC FRACTURE TOUGHNESS OF FERRITIC DUCTILE CAST IRON USING THE MASTER CURVE CONCEPT

Wolfram Baer, Marcel Holzwarth, Uwe Mayer

First Results for the Investigation of the Master Curve Concept for Ferritic Ductile Cast Iron using C(T)-Specimens

Marcel Holzwarth, Wolfram Baer, Uwe Mayer, Stefan Weihe

Evaluation of Dynamic Fracture Toughness Values of Ductile Cast Iron at -40 °C

Michael Ulbrich

OXYGEN INHIBITION OF GASEOUS HYDROGEN EMBRITTLEMENT IN STEEL: EXPERIMENTS AND SIMULATIONS

Pilar Fernandez-Pison, Quentin Sellam, Luciano Meirelles Santana, Daniella Lopes Pinto, Vincent Farrugia, Yazid Madi, Jacques Besson

STATE-OF-THE-ART FATIGUE TESTING APPROACHES FOR QUALIFICATION AND REPURPOSING THE EXISTING HYDROGEN INFRASTRUCTURES

Kalle Lipiäinen, Masoud Moshtaghi

HYDROGEN INDUCED FRACTURE TOUGHNESS DEGRADATION IN THE HEAT-AFFECTED ZONE OF A PIPELINE STEEL

Laura De Pue, Sarah Vandorpe, Jubica Jubica, Lisa Claeys, Behzad Vasheghani Farahani, Tom Depover, Kim Verbeken, Wim De Waele

HYDROGEN EMBRITTLEMENT IN L485 PIPELINE MATERIALS: COMPARATIVE INSIGHTS BETWEEN EXCAVATED AND STOCK CONDITIONS

Jubica Jubica, Lisa Claeys, Laura De Pue, Wim De Waele, Tom Depover, Kim Verbeken

Characterization methodology of pipeline weld joints under hydrogen gas using miniature specimens.

Said BELKACEMI, Jacques BESSON, Maxime BERTIN, Abdennour MEDDOUR, Yazid MADI

Improving Hydrogen Embrittlement Resistivity of Ultra-High Strength Wire Rod Steel for Fastener Production

H. Elsayed, M. Galler, R. Vallant, C. Sommitsch

BIAXIAL FATIGUE UNDER TENSION-TORSION UFT

Luis Reis, Henrique Lopes, Pedro R. da Costa, Diogo Montalvão, Manuel Freitas

EFFECT OF STRESS STATE AND LOAD RATIO ON THE RATCHET DEFORMATION OF NUCLEAR STRUCTURAL MATERIAL

Sang Eon Kim, Jin Weon Kim, Su Yeong Lee, Jong Sung Kim

ON THE APPLICATION OF MACHINE LEARNING ALGORITHMS FOR THE PREDICTION OF THE FATIGUE RESPONSE OF ADDITIVELY MANUFACTURED PARTS

Alessio Centola, Alberto Ciampaglia, Filippo Berto, Davide Paolino, Andrea Tridello

A NUMERICAL MODEL FOR BENDING FATIGUE LIFE PREDICTION IN GEARS WITH ARBITRARY TOOTH PROFILE

Niko Trumbić, Ivan Čular, Robert Basan, Krešimir Vučković

IMPROVED FATIGUE BEHAVIOR IN HIGH SPEED STEELS BY TRANSFORMATION-INDUCED CRACK CLOSURE

Lukas Walch, Thomas Klünsner, Anton Hohenwarter, Reinhard Pippan, Megan J. Cordill, Stefan Marsoner, Alfred Hackl, Harald Leitner, Gerald Ressel

EXPERIMENTAL STUDY ON CORROSION-FATIGUE OF HIGH-STRENGTH STEEL STRAND BASED ON 3D-SCANNING

Ka Fai Yuen, Peng jiao Wang, Kwok Fai Chung

A STUDY ON EVALUATION OF NON-PROPORTIONAL MULTIAXIAL LOADING EFFECT ON FATIGUE LIFE UNDER WIDE-RENGED MULTIAXIAL STRESS STATE

Takamoto Itoh, Lei He

Dislocation multiplication and structures in micro-sized nickel single crystal under low-amplitude cyclic loading

Kota Sugisaka, Masataka Abe, Takashi Sumigawa

HIGH TEMPERATURE FRACTURE TOUGHNESS TESTS ON P91 STEEL

Arthur Félix Perez, Tristan François Calvet, Yiqiang Wang, Catrin Mair Davies

ELECTRICAL RESISTANCE-BASED FATIGUE DAMAGE ASSESSMENT OF STEELS

Lukas Maximilian Sauer, Lars Andree Lingnau, Johannes Leon Otto, Frank Walther

THE EFFECT OF MEAN NORMAL STRESS ON THE FATIGUE BEHAVIOUR OF STRUCTURAL STEELS SUBJECTED TO ULTRASONIC LOADINGS: AN ASSESSMENT OF GOODMAN’S APPROACH WITHIN THE VERY HIGH CYCLE FATIGUE REGIME

Joao Alves Araujo, Tiago Lima Castro, Maria Clara Teixeira, Marcos Venicius Pereira

A DISCUSSION ON ALTERNATIVE APPROACHES TO CT COUPON BASED K1c DETERMINATION PROVIDING RESULTS COMPARABLE WITH ASTM E 399

Parthasarathy Iyengar, Jon Mardaras, Raul Olmo-Mora, Shwe Soe

COMMENTARY ON THE USE OF PUBLISHED FATIGUE CURVES AND CONDUCTING CONSTANT DISPLACEMENT KIH FRACTURE MECHANICS TESTING OF METALLIC MATERIALS

Mads Holm, Ditte Bilgrav Bangsgaard, Rian Holdstock

NUMERICAL MODELLING OF MICROPOROSITY EFFECTS ON THE MECHANICAL BEHAVIOUR OF TITANIUM SCAFFOLDS PRODUCED BY DIRECT INK WRITING

Karel Slámečka, Petr Skalka, Jaroslav Pokluda

Fatigue of metallic glasses after an overload as a first step to fatigue under variable amplitude loading

Michael Marx, Ralf Busch, Christian Motz

MECHANISM OF FATIGUE FAILURE IN A SIMULATED RECYCLED 6082 AL-ALLOY

Aritra Sarkar, Jon Holmestad, Siri Marthe Arbo, Bård Nyhus, Nima Razavi

Microstructure-based tensile indicator for assessing high-cycle and very-high-cycle fatigue of titanium alloys with additive and conventional manufacturing

Xiangnan PAN, Zhiqiang TAO, Youshi HONG

IN-DEPTH ANALYSIS OF NANOSCALE DEFORMATION MECHANISMS OF HOT-DIP GALVANIZED ZINC COATINGS BY USING IN-SITU SEM, EBSD & DIC

Gert-Jan Slokker, Dennis Konig, Casper Mornout, Tijmen Vermeij, Johan Hoefnagels

Microstructure Based Analysis of Plasticity and Failure of Dual Phase Steels

Eren Çelikses, İbrahim Yelek, Yasin Akbaş, Berkehan Tatli, Can Erdogan, Tuncay Yalçinkaya

Effects of Residual Stress on the Compressive Strengths of Thermally Strengthened Glass Spheres

Fenghua ZHOU, Jia ZHANG, Yulong Li, Yuxuan ZHENG

MULTI-SCALE RESIDUAL STRESS EVALUATION IN LASER-WELDED EUROFER97 STEEL FOR FUSION PLANT

Tan Sui

3D BULK RESIDUAL STRAIN EVALUATION USING NEUTRON BRAGG EDGE IMAGING STRAIN TOMOGRAPHY IN LASER-WELDED EUROFER97 STEEL FOR FUSION POWER PLANT

Bin Zhu, Nathanael Leung, Winfried Kockelmann, Andrew London, Michael Gorley, Mark Whiting, Yiqiang Wang, Tan Sui

DEVELOPING A MACHINE LEARNING MODEL FOR PREDCTING THE CREEP RESPONSE IN SIMILAR FUSION REACTOR JOINTS

Brandon Steel, Bin Zhu, Tan Sui, Hannah Zhang, Yiqiang Wang

THE EFFECT OF HIGH HEAT FLUEXES ON THE MICRORESIDUAL STRESS DISTRIBUTION FOR W ARMOUR USED IN FUSION REACTORS

Omar Mohamed, Bin Zhu, David England, Yiqiang Wang, Mark Whiting, Jeong-Ha You, Tan Sui

DEVELOPING CHARACTERISATION TECHNIQUES FOR ANALYSING RESIDUAL STRESS IN DISSIMILAR FUSION REACTORS JOINTS

David England, Bin Zhu, Hannah Zhang, David Cox, Tristan Calvet, Catrin M. Davies, Mark J. Whiting, Yiqiang Wang, Tan Sui

Localized damage behavior of P92 welded joints based on crystal plasticity method

Jianming Gong

FRACTURE MECHANICS ANALYSIS OF UNDERCUT EFFECTS IN MISALIGNED WELDED JOINTS

Mihajlo Aranđelović, Simon Sedmak, Branislav Đorđević, Dorin Radu, Ana Petrović

On the Fatigue Behaviour of High-Strength Steel Welded Joints through Averaged Strain Energy Density method

Carolina Schillaci, Pietro Foti, Filippo Berto

FATIGUE LIFE EVALUATION OF A WELDED JOINT USED IN A HIGH CAPACITY PRESS USING DIFFERENT APPROACHES

Ali Yetgin, Emre Özaslan, Bülent Acar, Buse Yarşılıkal Solmaz

Crack propagation behavior in P92 welded joint based on crystal plasticity finite element method combined with XFEM

Dewen Zhou, Xiaowei Wang, Jianming Gong, Magd Abdel Wahab

Evaluation of Fatigue life in Corner Welded Joints

Peter Duncan Hanna, Yi Gao, Steve Whitfield, Catrin Mair Davies