Conference Agenda

AI based Surrogate Model for Property Linkages Prediction in Additive Manufacturing (AM)

Victor Rodrigo Iza Teran, Daniela Steffes-lai, Tom Niklas Klein

Fraunhofer SCAI, Germany

Quality Assurance via a Cyber-Physical System of a PBF-LB/M Machine

Konstantin Poka¹, Sozol Ali¹, Waleed Saeed¹, Benjamin Merz^1,2, Martin Epperlein¹, Kai Hilgenberg¹

1: Bundesanstalt für Materialforschung und -prüfung, Germany; 2: Technische Universität Berlin

Learning Automatic Part Orientation for Powder Bed Fusion of Metal from Part Data

Sebastian Wenger¹, Iryna Shevchenko¹, Joschka zur Jaсobsmühlen², Jörg Krüger¹, Eckart Uhlmann¹

1: TU Berlin, Department Industrial Automation Technology, Germany; 2: Materialise GmbH, Bremen, Germany

Vat Photopolymerization of Highly Dielectric and Piezoceramic Materials

Martin Schwentenwein, Dominik Brouczek, Altan Altun, Christoph Hofstetter

Lithoz GmbH, Austria

A New Approach of Shaping Dark Ceramics with High Density by Means of Simultaneous Material Extrusion and Green Machining

Siddharth Tiwari¹, Johannes Abel², Uwe Scheithauer², Axel Müller-Kühn², Alejandro Lejtman Rotberg¹

1: 3DCeram Sinto Tiwari GmbH, Berlin, Germany; 2: Fraunhofer IKTS, Dresden, Germany

Strength Testing of Additive Manufactured Ceramics – A Round Robin Using the CharAM-Methodology

Maximilian Staudacher¹, Uwe Scheithauer², Maria Reichel², Nadine Lorenz², Martin Schwentenwein³, Tanja Lube¹

1: Montanuniversität Leoben, Austria; 2: Fraunhofer IKTS Dresden, Germany; 3: Lithoz GmbH, Austria

Residual Stress Analysis by Neutron Diffraction- nondestructive Measurement for Quality Control of Metal Additive Manufactured Parts

Sin Ting Cynthia Chang¹, Jan Capek^1,2, Florencia Malamud^1,2, Dario Puccio³, Thomas Etter⁴, Silke Ursula Bramann³, Jan Schwerdtfeger⁴

1: ANAXAM, Switzerland; 2: Paul Scherrer Institut, Switzerland; 3: Inspire AG, Switzerland; 4: Lincotek Additive, Switzerland

Effect Of Part Geometry on Thermal History and Mechanical Properties of Additively Manufactured 316L

Michael Berghaus¹, Steffen Florian¹, Keyur Solanki², Carolin Zinn², Hongcai Wang², Benjamin Butz², Hilmar Apmann¹, Axel von Hehl²

1: FH Münster, Germany; 2: Universität Siegen, Germany

Assessment of Triply Periodic Minimal Surfaces Utilizing a Cutting Edge Process Chain

Alex Selbmann¹, Leonhard Stampa^1,2, Emely Bortel³, Moritz Valentino Huber⁴, Deekshitha Kancharla^1,2, Moritz Greifzu¹, Sebastian Schettler¹, Bernhard Hesse³, Elena López¹

1: Institute for Material and Beam Technology IWS, Fraunhofer IWS, Germany; 2: Institute of Materials Science, TU Dresden, Germany; 3: XPLORAYTION GmbH, Germany; 4: Hyperganic Pte. Ltd., Singapore

Exploring the Impact of Titanium Powder Aging through a Holistic Data Management

Peter Lindecke¹, Maximilian Kluge², Jan Eggert³

1: amsight GmbH, Germany; 2: Fraunhofer IAPT, Germany; 3: implantcast GmbH, Germany

Development of an Automated and Continuous Data Extraction and Input Pipeline in AM for Simulation Processes using Ontology-Based Knowledge

Florian Zumpe¹, Omid Safari¹, Marc Münnich¹, Yen Mai Thi², Ralph Riedel², Mario Callefi³, Pierre Grzona³, Daniel Seifert³, Matthias Thürer³

1: Fraunhofer IWU Chemnitz, Germany; 2: Westsächsische Hochschule Zwickau, Germany; 3: Technische Universität Chemnitz, Germany

Material-driven Topology Optimization of Cold Plates and Heatsinks

Nicola Casari

ToffeeX, United Kingdom

Electron Beam Powder Bed Fusion Technology for Mass Production

Ulric Ljungblad, Per Woxenius, Seshendra Karamchedu

Freemelt, Sweden

In Situ CT Tensile Testing of PBF-EB Additively Manufactured Ti-5553 a Process-microstructure-defect Properties Study

Julius Hendl^1,2, Axel Marquardt^1,2, Stepien Lukas², Elena Lopez², Frank Brückner^2,3, Christoph Leyens^1,2

1: Technische Universität Dresden, Institute of Materials Science, Germany; 2: Fraunhofer – Institute for Material and Beam Technology (IWS - Dresden), Germany; 3: Luleå University of Technology, Sweden

Additive Fabrication of Wear Resistant Components

Alexander Kirchner¹, Marie Franke-Jurisch¹, Chongliang Zhong¹, Thomas Weißgärber^1,2

1: Fraunhofer IFAM Dresden, Germany; 2: TUD Dresden University of Technology

Optimizing Polymer 3D Printing: A One-Dimensional Simulation Approach to Enhance PBF-LB/P Process Efficiency

Claas Bierwisch¹, Bastien Dietemann¹, Moritz Grünewald², Christian Schlör³, Johannes Rudloff³

1: Fraunhofer IWM, Germany; 2: Fraunhofer IPA, Germany; 3: German Plastics Center SKZ, Germany

Part-scale Thermomechanical Modeling of Directed Energy Deposition

Vaibhav Nain

IREPA LASER, France

Mesoscopic Homogenization Method of Mechanical Parameters of Fused Filament Fabrication Structures Considering Void Shapes and Filament Interfaces.

Marlies Springmann, Peter Middendorf

Institute of Aircraft Design, University of Stuttgart, Germany