Conference Agenda
Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).
Please note that all times are shown in the time zone of the conference. The current conference time is: 18th May 2024, 08:21:40pm BST
|
Session Overview | |
Location: B200 |
Date: Monday, 11/Sept/2023 | |
9:30am - 9:50am |
Opening Session: Conference Welcome Location: B200 Chair: Prof. Ahmed Kovacevic Co-Chair: Halil Lacevic Conference will be open by Professor Elisabeth Hill, Deputy President at City, University of London |
9:50am - 10:20am |
Keynote Session 1 Location: B200 Chair: Ivor Rhodes Co-Chair: Halil Lacevic Hydrogen Compression Challenges for Net Zero Targets Engineered Solutions, United Kingdom |
10:40am - 11:40am |
1A Screw Compressors Location: B200 Chair: Dr. Sham Rane Co-Chair: Neeraj Bikramaditya Comparison of PV-diagrams between CFD and experimental results for twin-screw compressors Carrier Corp, United States of America Influence of bearing and seal design on performance of an oil-injected screw compressor for refrigeration applications 1: City, University of London, United Kingdom; 2: Mayekawa UK Ltd, Glasgow Simplified engineering calculation methods of the temperature distribution along the screw compressor rotors 1: Kazan National Research Tehnological University, Russian Federation; 2: Chelyabinsk Compressor Plant, Russian Federation |
11:40am - 12:00pm |
Industry Talk - Platinum Sponsor Holroyd Location: B200 Chair: Dr. Matthew Read Co-Chair: Halil Lacevic |
12:00pm - 12:30pm |
Keynote Session 2 Location: B200 Chair: Dr. Matthew Read Co-Chair: Halil Lacevic GreenSCIES – a smart local energy system in Islington that we hope to connect to City, University of London GreenSCIES, United Kingdom |
1:30pm - 2:30pm |
2A Screw Compressors Location: B200 Chair: Dr. David Buckney Co-Chair: Hossein Keshtkar Presentations of research papers CFD Analysis of Leakage Flow in the Radial Tip Gap of a Roots Blower City, University of London, United Kingdom Thermodynamic properties of oil droplets impacting on chamber wall in oil-injected screw compressors 1: Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering, Wuhan University of Science and Technology, Wuhan, 430081, China; 2: Key Laboratory of Metallurgical Equipment and Control Technology, Ministry of Education, Wuhan University of Science and Technology, Wuhan, 430081, China Experimental investigation of the distribution of two-phase flow in oil-injected twin-screw compressors 1: TU Dortmund University, Germany; 2: BOGE KOMPRESSOREN Otto Boge GmbH & Co. KG, Germany |
2:50pm - 4:00pm |
Panel Session 1: Hydrogen Location: B200 Chair: Dr. Gunther Machu Co-Chair: Halil Lacevic |
4:00pm - 4:15pm |
Industry Talk - Gold Sponsor Howden Location: B200 Chair: Dr. Matthew Read Co-Chair: Halil Lacevic Fraser Jardine, Lead Product Engineer Graeme Hogarth, Package Manager |
4:15pm - 5:15pm |
3A Screw Compressors Location: B200 Chair: Prof. Nikola Stosic Co-Chair: Neeraj Bikramaditya Presentations of research papers Mesh generation for twin-screw compressors by spline-based parameterization using preconditioned Anderson acceleration 1: Dalian University of Technology, School of Mathematical Sciences, Dalian, 116024, China; 2: Delft Institute of Applied Mathematics, Delft University of Technology, Delft, 2628CD, the Netherlands Orthogonal Mesh Generation of Screw Compressors for Capturing Tip Leakage Flows 1: Program Development Company LLC, Bangalore, India - 560037; 2: Program Development Company, New York, United States - 10601 Two Way Coupling of CFD Conjugate Heat Transfer Simulation with Solid Thermal Expansion in a Twin Screw Compressor Simerics Inc., United States of America |
Date: Tuesday, 12/Sept/2023 | |
9:00am - 9:30am |
Keynote Session 3 Location: B200 Chair: Prof. Abdulnaser Sayma Co-Chair: Halil Lacevic Low Carbon Heating Solution via Heat Recovery with Heat Pump Danfoss Turbocor Compressor Inc., United States of America |
9:50am - 10:50am |
4A Screw Compressors Location: B200 Chair: Prof. Eckhard A. Groll Co-Chair: Neeraj Bikramaditya Presentations of research papers Investigating alternative rotor materials to increase displacement and efficiency of screw compressor while considering cost and manufacturability 1: Centre for Compressor Technology, City, University of London, London, U.K.; 2: Kirloskar Pneumatic Company Limited, Pune, India; 3: Vishwakarma Institute of Information Technology, Pune, India Investigation and Optimization of a Twin-Screw Compressor with Internal Cooling Channels 1: Purdue University, United States of America; 2: Ingersoll Rand Design of hobbing cutter for variable-pitch screw rotor 1: Compressor Department, Shanghai Marine Diesel Engine Research Institute, China; 2: State Key Laboratory of Compressor Technology, Hefei General Machinery Research Institute, China |
10:50am - 11:20am |
Keynote Session 4 Location: B200 Chair: Dr. Sham Rane Co-Chair: Halil Lacevic Recent Innovation in Turbo-compressors MAN Energy Solutions, Germany |
11:20am - 11:30am |
Lightyear Foundation - breaking down the barriers to disabled children taking part in STEM Location: B200 Chair: Dr. Sham Rane Co-Chair: Halil Lacevic |
1:30pm - 2:30pm |
5A Screw Compressors Location: B200 Chair: Dr. VENU MADHAV KUPPACHI Co-Chair: Hossein Keshtkar Presentations of research papers Theoretical analysis of hydrodynamic water-lubricated plain bearings for high-speed applications 1: Technische Universität Dresden, Germany; 2: Comibtherm GmbH A Novel Screw Compressor with a Shunt Enhanced Decompression and Pulsation Trap (SEDAPT) 1: Hi-Bar MC Technologies, LLC., United States of America; 2: Hi-Bar Blowers, Inc., United States of America; 3: CVS Engineering GmbH Model Validation of Twin Screw Compressor with Optimized Injection Port for Unit Efficiency Trane Technologies, United States of America |
2:50pm - 4:10pm |
6A Compressor Lubricants Location: B200 Chair: Ivor Rhodes Co-Chair: Neeraj Bikramaditya Study of lubricant compatibility with a low-GWP refrigerant as an alternative to R410A in a compressor test loop Korea Institute of Energy Research, Korea, Republic of (South Korea) Solubility and viscosity of variably miscible mixtures of refrigerant and lubricant 1: The Lubrizol Corporation; 2: CPI Fluid Engineering Compressor Designs, Lubricant Options and Refrigerant Selections: Putting the Puzzle Together Shrieve Chemical Products LLC, United States of America Characteristics and Lubricity of Refrigeration Oil for R290 ENEOS Corporation, Japan |
4:10pm - 5:00pm |
Industry Talks Location: B200 Chair: Dr. Thibaud Plantegenet Co-Chair: Halil Lacevic High Temperature Heat Pumps, Hydrocarbon refrigerants, and appropriate lubricant selection for improved efficiency. Shrieve Chemical, United States of America Novel holistic approach for high-capacity high-pressure hydrogen compression HOERBIGER Wien GmbH, Austria Nineteen Group - Air-Tech exhibition Nineteen Group |
Date: Wednesday, 13/Sept/2023 | |
9:00am - 9:30am |
Keynote Session 5 Location: B200 Chair: Prof. Ahmed Kovacevic Co-Chair: Hossein Keshtkar 3D printing for compressor Design: Limitations and advantages Nanyang Technological University, Singapore |
9:50am - 11:30am |
7A Novel Machines Location: B200 Chair: Prof. Kim Tiow Ooi Co-Chair: Neeraj Bikramaditya Demonstration of computationally efficient vapor injection optimization method for spool compressor 1: Center for Integrated Building Systems, Oklahoma State University, Stillwater, OK, 74078; 2: Torad Engineering LLC, Cumming, GA, 30040 Theory and Test of Expansion Power Recycle of Rotary Cylinder Compressor 1: State Key Laboratory of Air-conditioning Equipment and System Energy Conservation, Zhuhai, Guangdong 519070, China; 2: Guangdong Key Laboratory of Refrigeration Equipment and Energy Conservation Technology; 3: Gree Electric Appliances, INC. of Zhuhai, China An investigation of internally-geared screw compressor performance using a chamber modelling approach City, University of London, United Kingdom Development of Numerical Grid and CFD Model for Analysis of Oil-injected IGSM City, University of London, United Kingdom Experimental study of conical rotary compressor for high pressure ratio application Vert Rotors, United Kingdom |
11:30am - 12:30pm |
Panel Session 2: Sustainable Industrial Heating Location: B200 Chair: Dr. Andy Pearson Co-Chair: Halil Lacevic |
1:30pm - 2:20pm |
Updates: City, University of London Location: B200 Chair: Ivona Ivkovic-Kihic Co-Chair: Halil Lacevic Inauguration of the ESaNZ “Energy, Sustainability and Net-Zero Research Centre (ESaNZ)” City, University of London, United Kingdom CERES Consortium (Compressors and Expanders in Future Energy Systems) City, University of London, United Kingdom |
2:20pm - 3:10pm |
Panel Session for students Location: B200 Chair: Hossein Keshtkar Co-Chair: Halil Lacevic |
3:10pm - 3:30pm |
Awards Ceremony and Conference Closing Session Location: B200 Chair: Prof. Ahmed Kovacevic |
Contact and Legal Notice · Contact Address: Privacy Statement · Conference: Compressors 2023 |
Conference Software: ConfTool Pro 2.6.149 © 2001–2024 by Dr. H. Weinreich, Hamburg, Germany |